Near infrared (NIR) absorption spectra correlates with subchondral bone micro-CT parameters in osteoarthritic rat models

Determining the properties and integrity of subchondral bone in the developmental stages of osteoarthritis, especially in a form that can facilitate real-time characterization for diagnostic and decision-making purposes, is still a matter for research and development. This paper presents relationships between near infrared absorption spectra and properties of subchondral bone obtained from 3 models of osteoarthritic degeneration induced in laboratory rats via: (i) menisectomy (MSX); (ii) anterior cruciate ligament transaction (ACL); and (iii) intra-articular injection of mono-ido-acetate (1 mg) (MIA), in the right knee joint, with 12 rats per model group (N = 36). After 8 weeks, the animals were sacrificed and knee joints were collected. A custom-made diffuse reflectance NIR probe of diameter 5 mm was placed on the tibial surface and spectral data were acquired from each specimen in the wavenumber range 4000–12 500 cm− 1. After spectral acquisition, micro computed tomography (micro-CT) was performed on the samples and subchondral bone parameters namely: bone volume (BV) and bone mineral density (BMD) were extracted from the micro-CT data. Statistical correlation was then conducted between these parameters and regions of the near infrared spectra using multivariate techniques including principal component analysis (PCA), discriminant analysis (DA), and partial least squares (PLS) regression. Statistically significant linear correlations were found between the near infrared absorption spectra and subchondral bone BMD (R2 = 98.84%) and BV (R2 = 97.87%). In conclusion, near infrared spectroscopic probing can be used to detect, qualify and quantify changes in the composition of the subchondral bone, and could potentially assist in distinguishing healthy from OA bone as demonstrated with our laboratory rat models.

Developing a framework for work integrated research higher degree studies in an Australian engineering context

The umbrella of Australian research higher degree (RHD) offerings has broadened from the traditional MPhil/PhD programmes to include a range of professional masters and doctoral degrees. This article reports on the experiences of three PhD students, engaged in an informally managed industry partnered research programme, described in this article as the work integrated research higher degree (WIRHD). Their learning process shares the attributes from both the traditional PhD programme and professional doctorates. However, because of the blended nature of the learning contexts, candidates engaged in the WIRHD programme must address a wider range of issues than those following the traditional RHD pathway. An exploratory case study approach was adopted with the view to develop an integrative framework to explain the various contexts that influence the learning experience of WIRHD candidates, as well as a structured approach to guide this contemporary form of industry partnered WIRHD process.

Ruthenium(II) dichloro or dithiocyanato complexes with 4,4′:2′,2″:4″,4‴-quaterpyridinium ligands : towards photosensitisers with enhanced low-energy absorption properties

Fourteen new complexes of the form cis-\[RuIIX2(R2qpy2+)2]4+ (R2qpy2+ = a 4,4′:2′,2″:4″,4‴-quaterpyridinium ligand, X = Cl− or NCS−) have been prepared and isolated as their PF6− salts. Characterisation involved various techniques including 1H NMR spectroscopy and +electrospray or MALDI mass spectrometry. The UV–Vis spectra display intense intraligand π → π∗ absorptions, and also metal-to-ligand charge-transfer (MLCT) bands with two resolved maxima in the visible region. Red-shifts in the MLCT bands occur as the electron-withdrawing strength of the pyridinium groups increases, while replacing Cl− with NCS− causes blue-shifts. Cyclic voltammograms show quasi-reversible or reversible RuIII/II oxidation waves, and several ligand-based reductions that are irreversible. The variations in the redox potentials correlate with changes in the MLCT energies. A single-crystal X-ray structure has been obtained for a protonated form of a proligand salt, \[(4-(CO2H)Ph)2qpyH3+]\[HSO4]3·3H2O. Time-dependent density functional theory calculations give adequate correlations with the experimental UV–Vis spectra for the two carboxylic acid-functionalised complexes in DMSO. Despite their attractive electronic absorption spectra, these dyes are relatively inefficient photosensitisers on electrodes coated with TiO2 or ZnO. These observations are attributed primarily to weak electronic coupling with the surfaces, since the DFT-derived LUMOs include no electron density near the carboxylic acid anchors.

Near Infrared Spectroscopy Evaluation of Articular Cartilage : Decision-Making in Arthroplasty : Real-Time Assessment of Articular Cartilage

Current diagnostic methods for assessing the severity of articular cartilage degenerative conditions, such as osteoarthritis, are inadequate. There is also a lack of techniques that can be used for real-time evaluation of the tissue during surgery to inform treatment decision and eliminate subjectivity. This book, derived from Dr Afara’s doctoral research, presents a scientific framework that is based on near infrared (NIR) spectroscopy for facilitating the non-destructive evaluation of articular cartilage health relative to its structural, functional, and mechanical properties. This development is a component of the ongoing research on advanced endoscopic diagnostic techniques in the Articular Cartilage Biomechanics Research Laboratory of Professor Adekunle Oloyede at Queensland University of Technology (QUT), Brisbane Australia.

Three dimensional simulation of a parabolic trough concentrator thermal collector

Parabolic Trough Concentrators (PTC) are the most proven solar collectors for solar thermal power plants, and are suitable for concentrating photovoltaic (CPV) applications. PV cells are sensitive to spatial uniformity of incident light and the cell operating temperature. This requires the design of CPV-PTCs to be optimised both optically and thermally. Optical modelling can be performed using Monte Carlo Ray Tracing (MCRT), with conjugate heat transfer (CHT) modelling using the computational fluid dynamics (CFD) to analyse the overall designs. This paper develops and evaluates a CHT simulation for a concentrating solar thermal PTC collector. It uses the ray tracing work by Cheng et al. (2010) and thermal performance data for LS-2 parabolic trough used in the SEGS III-VII plants from Dudley et al. (1994). This is a preliminary step to developing models to compare heat transfer performances of faceted absorbers for concentrating photovoltaic (CPV) applications. Reasonable agreement between the simulation results and the experimental data confirms the reliability of the numerical model. The model explores different physical issues as well as computational issues for this particular kind of system modeling. The physical issues include the resultant non-uniformity of the boundary heat flux profile and the temperature profile around the tube, and uneven heating of the HTF. The numerical issues include, most importantly, the design of the computational domain/s, and the solution techniques of the turbulence quantities and the near-wall physics. This simulation confirmed that optical simulation and the computational CHT simulation of the collector can be accomplished independently.

Visioning technology-based simulated learning environments in the social work curriculum

This report, prepared by QUT Social Work and Human Services, in collaboration with key sector stakeholders, identifies the current and potentially expanded uses of Simulated Learning Environments (SLE) as part of the Health Workforce Australia (HWA) National Project. An expert Reference Group guided the project, facilitated the data collection, and provided feedback and support on the findings and broad recommendations.

Studying in Cuba, returning home to work : experiences of graduates from the English-speaking Caribbean

Cuba’s higher education scholarship program has received little attention in the literature on education and development. In this chapter, I discuss themes that emerge from my interviews with graduates from English-speaking Caribbean countries who studied in Cuba, as well as Cuban educators, on the nature of their academic programs and their subsequent careers. This facilitates exploration of a number of questions, including the following: 1. How, in the perceptions of scholarship students and graduates, have they experienced the philosophy of combing study, practical work, and research in the tertiary education curriculum in Cuban universities? 2. What impact does studying in Cuba appear to have on graduates after they return to their home countries? 3. How does the experience of the graduates throw light on the relationship between tertiary education and national development?

Walk@Work : an automated intervention to increase walking in university employees not achieving 10,000 daily steps

This study assessed the workday step counts of lower active (<10,000 daily steps) university employees using an automated, web-based walking intervention (Walk@Work). METHODS: Academic and administrative staff (n=390; 45.6±10.8years; BMI 27.2±5.5kg/m2; 290 women) at five campuses (Australia [x2], Canada, Northern Ireland and the United States), were given a pedometer, access to the website program (2010-11) and tasked with increasing workday walking by 1000 daily steps above baseline, every two weeks, over a six week period. Step count changes at four weeks post intervention were evaluated relative to campus and baseline walking. RESULTS: Across the sample, step counts significantly increased from baseline to post-intervention (1477 daily steps; p=0.001). Variations in increases were evident between campuses (largest difference of 870 daily steps; p=0.04) and for baseline activity status. Those least active at baseline (<5000 daily steps; n=125) increased step counts the most (1837 daily steps; p=0.001), whereas those most active (7500-9999 daily steps; n=79) increased the least (929 daily steps; p=0.001). CONCLUSIONS: Walk@Work increased workday walking by 25% in this sample overall. Increases occurred through an automated program, at campuses in different countries, and were most evident for those most in need of intervention.

Load-unloading response of intact and artificially degraded articular cartilage correlated with near infrared (NIR) absorption spectra

The conventional mechanical properties of articular cartilage, such as compressive stiffness, have been demonstrated to be limited in their capacity to distinguish intact (visually normal) from degraded cartilage samples. In this paper, we explore the correlation between a new mechanical parameter, namely the reswelling of articular cartilage following unloading from a given compressive load, and the near infrared (NIR) spectrum. The capacity to distinguish mechanically intact from proteoglycan-depleted tissue relative to the "reswelling" characteristic was first established, and the result was subsequently correlated with the NIR spectral data of the respective tissue samples. To achieve this, normal intact and enzymatically degraded samples were subjected to both NIR probing and mechanical compression based on a load-unload-reswelling protocol. The parameter δ(r), characteristic of the osmotic "reswelling" of the matrix after unloading to a constant small load in the order of the osmotic pressure of cartilage, was obtained for the different sample types. Multivariate statistics was employed to determine the degree of correlation between δ(r) and the NIR absorption spectrum of relevant specimens using Partial Least Squared (PLS) regression. The results show a strong relationship (R(2)=95.89%, p<0.0001) between the spectral data and δ(r). This correlation of δ(r) with NIR spectral data suggests the potential for determining the reswelling characteristics non-destructively. It was also observed that δ(r) values bear a significant relationship with the cartilage matrix integrity, indicated by its proteoglycan content, and can therefore differentiate between normal and artificially degraded proteoglycan-depleted cartilage samples. It is therefore argued that the reswelling of cartilage, which is both biochemical (osmotic) and mechanical (hydrostatic pressure) in origin, could be a strong candidate for characterizing the tissue, especially in regions surrounding focal cartilage defects in joints.

Work integrated research higher degree studies : experiences, benefits, barriers and coping strategies

Attributed to the changing social, political and economic landscape of the ‘knowledge economy’, Australian universities are under pressure to produce researchers that have a variety of skills which meet the demands of an increasingly diverse job market. As a consequence, the Australian PhD now includes a range of doctoral degrees. This paper reports on the experiences of two PhD students engaged in an informally managed research higher degree program described in this paper as a Work Integrated Research Higher Degree (WIRHD). Their learning process shares the attributes from both the traditional PhD program and professional doctorates. However, because of the blended nature of the learning contexts, what students need to manage within the WIRHD is much more complicated than the established RHD programs. An exploratory case study approach exploring experiences, benefits, barriers and coping strategies was conducted with the view to develop a preliminary integrative framework that attempts to explain the various contexts that influence the learning experience of WIRHD candidates. The paper concludes with some recommended strategies for helping WIRHD candidates to manage the challenges associated with their learning process.

‘The health-location connection’: using GIS and social media on smartphones to track engagement with the Local urban environment for work, recreation, and physical activity

A technologically innovative study was undertaken across two suburbs in Brisbane, Australia, to assess socioeconomic differences in women's use of the local environment for work, recreation, and physical activity. Mothers from high and low socioeconomic suburbs were instructed to continue with usual daily routines, and to use mobile phone applications (Facebook Places, Twitter, and Foursquare) on their mobile phones to ‘check-in’ at each location and destination they reached during a one-week period. These smartphone applications are able to track travel logistics via built-in geographical information systems (GIS), which record participants’ points of latitude and longitude at each destination they reach. Location data were downloaded to Google Earth and excel for analysis. Women provided additional qualitative data via text regarding the reasons and social contexts of their travel. We analysed 2183 ‘check-ins’ for 54 women in this pilot study to gain quantitative, qualitative, and spatial data on human-environment interactions. Data was gathered on distances travelled, mode of transport, reason for travel, social context of travel, and categorised in terms of physical activity type – walking, running, sports, gym, cycling, or playing in the park. We found that the women in both suburbs had similar daily routines with the exception of physical activity. We identified 15% of ‘check-ins’ in the lower socioeconomic group as qualifying for the physical activity category, compared with 23% in the higher socioeconomic group. This was explained by more daily walking for transport (1.7kms to 0.2kms) and less car travel each week (28.km to 48.4kms) in the higher socioeconomic suburb. We ascertained insights regarding the socio-cultural influences on these differences via additional qualitative data. We discuss the benefits and limitations of using new technologies and Google Earth with implications for informing future physical and social aspects of urban design, and health promotion in socioeconomically diverse cities.

The role of, and key considerations for, advertising campaigns and educational awareness workshops within the work-related road safety context

Australian and international evidence suggests that, in the work-related driving context, road crashes account for a substantial number of occupational incidents. In the attempt to reduce injury and improve safety, organisations may implement an array of strategies and interventions ranging from policy development and implementation, vehicle selection and incident monitoring through to education and awareness-raising. This conceptual paper discusses aspects relating to the latter collection of interventions and, in particular, the role, and some key considerations with respect to the content and dissemination, of advertising campaigns and educational awareness workshops. In relation to advertising campaigns, this paper discusses how some of the overarching principles associated with advertising in the broader general community road safety strategy also apply within the work-related road safety context. Specifically, advertising campaigns/materials should be viewed as a key component within a dedicated organisational approach to road (driver) safety. This dedicated approach would need to comprise of a number, and varied array, of strategies. In addition, the content of, and medium/s (e.g., posters) by which to deliver such advertising campaigns, cannot be addressed by a one-size-fits all approach but, rather, requires careful consideration of the needs as well as characteristics of specific organisations and their driver fleet. The paper provides a summary of some key considerations when devising an advertising campaign, including the nature of campaign/message content as well as the processes by which to devise and refine such content. In relation to driver education awareness workshops, this paper outlines the key considerations for delivering a series of workshops specifically aimed at occupational driving within the organisational context. A case study approach will be utilised to demonstrate the manner in which educational awareness workshops can compliment successful advertising campaigns promoting safer work related driving through better risk management practice. Research underpinning the development of driver behaviour modification tools incorporated within the workshops will also be discussed along with the mechanisms utilised to encourage improvements in driver monitoring and behaviour. In an effort to assist organisations with their continual search for cost-effective approaches which may, ultimately, contribute to improvements in driver behaviour and safety, the current paper offers some clear and practical suggestions in relation to the development and dissemination of two types of interventions, advertising campaigns and education awareness workshops.

Work-integrated learning courses : an essential component for preparing students to work in statutory child protection?

Undergraduate programs can play an important role in the development of individuals wanting professional employment within statutory child protection agencies: both the coursework and the work-integrated learning (WIL) components of degrees have a role in this process. This paper uses a collective case study methodology to examine the perceptions and experiences of first year practitioners within a specific statutory child protection agency in order to identify if they felt prepared for their current role. The sample of 20 participants came from a range of discipline backgrounds with just over half of the sample (55 per cent) completing a WIL placement as part of their undergraduate studies. The results indicate that while some participants were able to identify and articulate specific benefits from their undergraduate coursework studies all participants who had undertaken a WIL placement as part of their degree believed the WIL placement was beneficial for their current work.

eHealth in Australia and elsewhere : a comparison and lessons for the near future

Meticulous planning and preparation do not always guarantee that eHealth programs unfold as predicted. eHealth entails interdependent social interactions which are difficult to predict without past experience or reference to lessons learned. Judicious insight into past case studies and eventualities, therefore, is essential towards building a successful eHealth solution. Australia’s eHealth program is at a crucial stage where appropriate policy considerations and operational changes are in order. In this paper, we present an initial exploration of prominent eHealth initiatives of other countries to identify similarities, differences and to seek lessons towards making Australia’s eHealth initiative a better journey.

Changing the discourse of women’s work : challenges and future directions

Theoretical work on the career development of women has travelled a journey from critique to creation. Early work responded to and criticised a literature that focused on theorising male roles in a workplace that was conceptualised as providing vertical career paths primarily for middle class males. Theorists have criticised the limitations of this theorising on the basis of gender, ability and social class variables - to name just a few. More recently theorists are creating new constructions and frameworks to enable a more holistic understanding of career, applicable to both women and men. This book provides a history of theorising about women's careers, in addition to presenting a focus on current empirical and theoretical work which contributes to current understandings of women's working lives. It has both mapped the current discourse and suggests challenges for future work. This chapter will provide a synthesis of the key issues presented in the book and pose some challenges for future work.