Impact of carbon/nitrogen feeding strategy on polyhydroxyalkanoates production using mixed microbial cultures

Polyhydroxyalkanoates (PHA) production using mixed microbial cultures (MMC) requires a multi-stage process involving the microbial selection of PHA-storing microorganisms, typically operated in sequencing batch reactors (SBR), and an accumulation reactor. Since low-cost renewable feedstocks used as process feedstock are often nitrogen-deficient, nutrient supply in the selection stage is required to allow for microbial growth. In this context, the possibility to uncouple nitrogen supply from carbon feeding within the SBR cycle has been investigated in this study. Moreover, three different COD:N ratios (100:3.79, 100:3.03 and 100:2.43) were tested in three different runs which also allowed the study of COD:N ratio on the SBR performance. For each run, a synthetic mixture of acetic and propionic acids at an overall organic load rate of 8.5 gCOD L-1 d-1 was used as carbon feedstock, whereas ammonium sulfate was the nitrogen source in a lab-scale sequence batch reactor (SBR) with 1 L of working volume. Besides, a sludge retention time (SRT) of 1 d was used as well as a 6 h cycle length. The uncoupled feeding strategy significantly enhanced the selective pressure towards PHA-storing microorganisms, resulting in a two-fold increase in the PHA production (up to about 1.3 gCOD L-1). A high storage response was observed for the two runs with the COD:N ratios (gCOD:gN) of 100:3.79 and 100:3.03, whereas the lowest investigated nitrogen load resulted in very poor performance in terms of polymer production. In fact, strong nitrogen limitation caused fungi to grow and a very poor storage ability by microorganisms that thrived in those conditions. The COD:N ratio also affected the polymer composition, indeed the produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) showed a variable HV content (1-20 %, w/w) among the three runs, lessening as the COD:N increased. This clearly suggests the possibility to use the COD:N ratio as a tool for tuning polymer properties regardless the composition of the feedstock.

Extraction of Trypanosoma cruzi DNA from food: a contribution to the elucidation of acute Chagas disease outbreaks

Abstract: INTRODUCTION: Before 2004, the occurrence of acute Chagas disease (ACD) by oral transmission associated with food was scarcely known or investigated. Originally sporadic and circumstantial, ACD occurrences have now become frequent in the Amazon region, with recently related outbreaks spreading to several Brazilian states. These cases are associated with the consumption of açai juice by waste reservoir animals or insect vectors infected with Trypanosoma cruzi in endemic areas. Although guidelines for processing the fruit to minimize contamination through microorganisms and parasites exist, açai-based products must be assessed for quality, for which the demand for appropriate methodologies must be met. METHODS: Dilutions ranging from 5 to 1,000 T. cruzi CL Brener cells were mixed with 2mL of acai juice. Four Extraction of T. cruzi DNA methods were used on the fruit, and the cetyltrimethyl ammonium bromide (CTAB) method was selected according to JRC, 2005. RESULTS: DNA extraction by the CTAB method yielded satisfactory results with regard to purity and concentration for use in PCR. Overall, the methods employed proved that not only extraction efficiency but also high sensitivity in amplification was important. CONCLUSIONS: The method for T. cruzi detection in food is a powerful tool in the epidemiological investigation of outbreaks as it turns epidemiological evidence into supporting data that serve to confirm T. cruzi infection in the foods. It also facilitates food quality control and assessment of good manufacturing practices involving acai-based products.

Coupling organic substrate removal to methane production in a fully biological microbial electrolysis cell

Microbial electrolysis cells (MECs) are an innovative and emerging technique based on the use of solid-state electrodes to stimulate microbial metabolism for wastewater treatment and simultaneous production of value-added compounds (such as methane). This research studied the performance of a two-chamber MEC in terms of organic matter oxidation (at the anode) and methane production (at the cathode). MEC‟s anode had been previously inoculated with an activated sludge, whereas the cathode chamber inoculum was an anaerobic sludge (containing methanogenic microorganisms). During the experimentation, the bioanode was continuously fed with synthetic solutions in anaerobic basal medium, at an organic load rate (OLR) of around 1 g L-1 d-1, referred to the chemical oxygen demand (COD). At the beginning (Run I), the feeding solution contained acetate and subsequently (Run II) it was replaced with a more complex solution containing soluble organic compounds other than acetate. For both conditions, the anode potential was controlled at -0.1 V vs. standard hydrogen electrode, by means of a potentiostat. During Run I, over 80% of the influent acetate was anaerobically oxidized at the anode, and the resulting electric current was recovered as methane at the cathode (with a cathode capture efficiency, CCE, accounting around 115 %). The average energy efficiency of the system (i.e., the energy captured into methane relative to the electrical energy input) under these conditions was over 170%. However, reactor‟s performance decreased over time during this run. Throughout Run II, a substrate oxidation over 60% (on COD basis) was observed. The electric current produced (57% of coulombic efficiency) was also recovered as methane, with a CCE of 90%. For this run the MEC‟s average energy efficiency accounted for almost 170 %. During all the experimentation, a very low biomass growth was observed at the anode whereas ammonium was transferred through the cationic membrane and concentrated at the cathode. Tracer experiments and scanning electron microscopy analyses were also carried out to gain a deeper insight into the reactor performance and also to investigate the possible reasons for partial loss of performance. In conclusion, this research suggests the great potential of MEC to successfully treat low-strength wastewaters, with high energy efficiency and very low sludge production.

Synthesis and characterization of C3-symmetric 1,3,5 - Benzenetricarboxamide derived supramolecular systems

The aim of this work was to study the self-assembly process of C3-symmetric molecules. To accomplish this objective 1,3,5 – benzentricarboxamides (BTA) derivatives were obtained. Five C3-symmetric molecules were synthesized in moderate to good yields (39-72%) using azo-benzene, aniline, benzylamine, tryptophan and tyrosine. The aggregation behavior of the BTA derivatives was probed with 1H-NMR spectroscopy, 1H-1H 2D Nuclear Overhauser Effect Spectroscopy (NOESY) and Diffusion Ordered Spectroscopy (DOSY). These experiments allowed to study the influence of H-bonding groups, aromatic rings, unsaturated bonds and the overall geometry in the molecular self-assembly associated with the different structural patterns present on these molecules. The stacking and large molecule behavior where observed in BTA 1, aniline derivative, BTA 4, tyrosine derivative or BTA 5, tryptophan derivative, with several of those discussed functional groups such as unsaturated bonds and H-bonding groups. BTA 5 was used in a few preliminary interaction studies with glucose and ammonium chloride showing interaction with the ammonium ion.

Influence of river ecological condition on changes in physico-chemical water parameters along rivers

Dissertação de mestrado em Ecology

Electrosynthesis of heterocyclic compounds by radical cyclization in environmentally friendly media

We investigated the reductive intramolecular cyclization of bromopropargyl ethers derivatives, catalyzed by electrogenerated (1,4,8,11-tetramethyl-1,4,8,11-tetraaza-cyclotetradecane)nickel(I), [Ni(tmc)]+ as the catalysts in N,N,N-trimethyl-N-(2- hydroxyethyl)ammonium bis(trifluoromethylsulfonyl)imide,[N1 1 1 2(OH)][NTf2] and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C2mim][NTf2] by cyclic voltammetry and controlled-potential electrolysis. The results show that the reaction leads to the formation of the expected cyclic compounds, which are important intermediates in the synthesis of natural products with possible biological activities.

Gellan gum-Ionic liquid membranes for electrochromic device application

Biopolymer-based materials have been of particular interest and they are alternatives to synthetic polymers based on the decreasing oil resources. The polymer electrolytes were doped with choline-based IL N,N,Ntrimethyl- N-(2-hydroxyethyl)ammonium bis(trifluoromethylsulfonyl)imide ([N1 1 1 2(OH)][NTf2]), or Er (CF3SO3)3 or both. The polymer electrolytes were employed in the production of glass/ITO/WO3/electrolyte/ CeO2–TiO2/ITO/glass electrochromic devices (ECDs). The lowest onset temperature for the degradation of all the SPEs is at ~130 °C for the Gellan Er (CF3SO3)3 (10:1) this temperature range of stability is wide enough for a material to be applied as an electrolyte/separator component in electrochemical devices. The three ECDs displayed fast switching speed (ca. 15 s). Gellan [N1 1 1 2(OH)][NTf2] Er (CF3SO3)3 (5:1:10) exhibited an electrochromic contrast of 4.2% in the visible region, the coloration efficiency attained at 555 nm was 3.5 and 0.90 cm-2 C-1 in the “colored” and “bleached” states, respectively, and the open circuit memorywas 48 h. Preliminary tests performed with a prototype electrochromic device (ECD) incorporating WO3 as cathodic electrochromic layer, are extremely encouraging.

Microfluidic based on aqueous two-phase system for plasmidic DNA purification

Dissertação de mestrado em Bioquímica Aplicada (área de especialização em Biotecnologia)

Anti-inflammatory and antinociceptive activities of Bauhinia monandra leaf lectin

A galactose-specific lectin from Bauhinia monandra leaves (BmoLL) have been purified through ammonium sulphate fractionation followed by guar gel affinity chromatography column. This study aimed to evaluate the potential anti-inflammatory and antinociceptive activity of pure BmoLL in mice. Anti-inflammatory activity was evaluated by 1% carrageenan-induced inflammation in mice treated with BmoLL. Acetic acid-induced abdominal writhing and hot plate methods evaluated antinociceptive activity. BmoLL significantly inhibited the carrageenan-induced paw edema by 47% (30 mg/kg) and 60.5% (60 mg/kg); acetylsalicylic acid (ASA, 100 mg/kg) showed inhibition of 70.5%, in comparison to controls. Leukocyte migration, an immune response to the inflammation process, was significantly reduced in presence of BmoLL; in mice treated with \ASA\ the decrease in leukocyte migration was similar to 15 mg/kg of the lectin. BmoLL at doses of 15, 30 and 60 mg/kg significantly reduced the number of animal contortions by 43.1, 50.1 and 71.3%, respectively.BmoLL leukocyte migration was significantly reduced; in mice treated with \ASA\ the decrease in leukocyte migration was similar to 15 mg/kg of the lectin. BmoLL at doses of 15, 30 and 60 mg/kg significantly reduced the number of animal contortions by 43.1, 50.1 and 71.3%, respectively. The lectin (30 and 60 mg/kg) showed a significant effect in the hot plate assay. BmoLL anti-inflammatory and antinociceptive effects were dose-dependent. The search for new and natural compounds, with minimal side effects, to control pain and inflammation, is constantly increasing. BmoLL has great potential as a natural anti-inflamatory product that can be explored for pharmacological purposes.

Bioremediation of diesel contaminated soils : an investigation into the effects of biosurfactant and organic matter amendments

The aim of this study was to investigate the effects of biosurfactants and organic matter amendments on the bioremediation of diesel contaminated soil. Two strains of Pseudomonas aeruginosa with the ability to produce biosurfactant were isolated from a water and soil sample in Co. Sligo. The first strain, Isolate A, produced a biosurfactant which contained four rhamnose containing compounds, when grown in proteose peptone glucose ammonium salts medium with glucose as the carbon source. Two of the components were identified as rhamnolipid 1 and 2 whilst the other two components were unidentified. The second strain, Isolate GO, when grown in similar conditions produced a biosurfactant which contained only rhamnolipid 2. The type of aeration system used had a significant effect on the abiotic removal of diesel from soil. Forced aeration at a rate of 120L 02/kg soil/ hour resulted in the greatest removal. Over a 112 day incubation period this type o f aeration resulted in the removal o f 48% o f total hexane extractable material. In relation to bioremediation of the diesel contaminated sandy soil, amending the soil with two inorganic nutrients, KH2PO4 and NÜ4N03, significantly enhanced the removal of diesel, especially the «- alkanes, when compared to an unamended control. The biosurfactant from Isolate A and a biosurfactant produced by Pseudomonas aeruginosa NCIMB 8628 (a known biosurfactant producer), when applied at a concentration of three times their critical micelle concentration, had a neutral effect on the biodégradation o f diesel contaminated sandy soil, even in the presence o f inorganic nutrients. It was deduced that the main reason for this neutral effect was because they were both readily biodegraded by the indigenous microorganisms. The most significant removal of diesel occurred when the soils were amended with two organic materials plus the inorganic nutrients. Amendment of the diesel contaminated soil with spent brewery grain (SBG) removed significantly more diesel than amendment with dried molassed sugar beet pulp (DMSBP). After a 108 day incubation period, amendment of the diesel contaminated soil with DMSBP plus inorganic nutrients and SBG plus inorganic nutrients resulted in 72 and 89% removal of diesel range organics (DRO), in comparison to 41% removal of DRO in an inorganic nutrient amended control. The first order kinetic model described the degradation of the different diesel components with high correlation and was used to calculate Vi lives. The V2 life, of the total «-alkanes in the diesel was reduced from 40 days in the control to 8.5 and 5.1 days in the presence of DMSBP and SBG, respectively. The V2 life o f the unresolved complex mixture (UCM) in the diesel contaminated soil was also significantly reduced in the presence o f the two organics. DMSBP and SBG addition reduced UCM V2 life to 86 and 43 days, respectively, compared to 153 days in the control. The component of diesel whose removal was enhanced the greatest through the organic material amendments was the isoprenoid, pristane, a compound which until recently was thought to be nonbiodegradable and was used as an inert biomarker in oil degradation studies. The V2 life of pristane was reduced from 533 days in the nutrient amended control to 49.5 and 19.5 days in DMSBP and SBG amended soils. These results indicate that the addition o f the DMSBP and SBG to diesel contaminated soil stimulated diesel biodégradation, probably by enhancing the indigenous diesel degrading microbial population to degrade diesel hydrocarbons, whilst the addition o f biosurfactants had no enhanced effect on the bioremediation process.

An evaluation of septic tank effluent movement in soil and groundwater systems

Recent studies have shown that septic tank systems are a major source of groundwater pollution. Many public health workers feel that the most cri^cal aspect of the use of septic tanks as a means of sewage disposal is the contamination of private water wells with attendant human health hazards. In this study the movement and attenuation of septic tank effluents in a range of soil/overburden types and hydrogeological situations was investigated. The suitability of a number of chemical and biological tracer materials to monitor the movement of septic tank effluent constituents to groundwater sources was also examined. The investigation was divided into three separate but inteiTelated sections. In the first section of the study the movement of septic tank effluent from two soil treatment systems was investigated by direct measurements of soil nutrient concentrations and enteric bacterial numbers in the soil beneath and downgradient of the test systems. Two sites with different soil types and hydrogeological characteristics were used. The results indicated that the attenuation of the effluent in both of the treatment systems was incomplete. Migration of nitrate, ammonium, phosphate and fecal bacteria to a depth of 50 cm beneath the inverts of the distribution tiles was demonstrated on all sampling occasions. The lateral migration of the pollutants was less pronounced, although on occasions high nutrients levels and fecal bacterial numbers were detected at a lateral distance of 4.0 m downgradient of the test systems. There was evidence that the degree and extent of effluent migration was increased after periods of heavy or prolonged rainfall when the attenuating properties of the treatment systems were reduced as a result of saturation of the soil. The second part of the study examined the contamination of groundwaters downgradient of septic tank soil treatment systems. Three test sites were used in the investigation. The sites were chosen because of differences in the thicknesses and nature of the unsaturated zone available for effluent attenuation at each of the locations. A series of groundwater monitoring boreholes were installed downgradient of the test systems at each of the sites and these were sampled regularly to assess the efficiency of the overburden material in reducing the polluting potential of the wastewater. Effluent attenuation in the septic tank treatment systems was shown to be incomplete, resulting in chemical and microbiological contamination of the groundwaters downgradient of the systems. The nature and severity of groundwater contamination was dependent on the composition and thickness of the unsaturated zone and the extent of weathering in the underlying saturated bedrock. The movement of septic tank effluent through soil/overburdens to groundwater sources was investigated by adding a range of chemical and biological tracer materials to the three septic tank systems used in section two of the study. The results demonstrated that a single tracer type cannot be used to accurately monitor the movement of all effluent constituents through soils to groundwater. The combined use of lithium bromide and endospores of Bacillus globigii was found to give an accurate indication of the movement of both the chemical and biological effluent constituents.

Estudos químico-agrícolas sôbre o enxofre

1. Analyses of soluble sulphates in 2 N ammonium chloride extracts of 24 samples of soils of the state of São Paulo, Brazil, S. A., showed a sulphur content varying from 0,0013 g per 100 g (found in the b layer of a genuine "terra roxa") to 0,007 g per 100 g of soil (b layer of a soil of depression without definite characteristics). (The results are expressed as elemental sulphur). Determinations of total sulphur in 56 samples of soils of the same state using the method of fusion with sodium carbonate and sodium nitrate revealed 0.007 g of elemental S per 100 g of soil as the lowest value (found in several soil types) and 0.096 g as the highest one (found in the b layer of an ar-quean soil). Apparently soluble sulphates accumulate in the upper layers and total sulphur does the opposite. It was found a strong correlation between total S and carbon content. 2. Under laboratory conditions, in a compost of fresh soil, powdered sulphur and apatite, it was verified after a three months period of incubation that the pH value lowered from 6.30 to 3.23; the citric acid solubility of apatite increased to 271.1 per cent of the original one. Lupinus sp. grown in soil manured with sulphur and apatite has showed fresh and dry weights higher than the plants in control pots; the results are significant at 5% level of probability; phosphorus content is also higher in the manured plants. It was observed a net influence of the apatite plus sulphur treatment on the weight of root nodosities that was four times greater than in the control plants. 3. Nearly five hundred determinations of S, N and P were carried out in 35 species of plants cultivated in the state of São Paulo. A great variation in the amounts of these elements was observed. As a general rule, the leaves contain more sulphur than the stems and roots show the lowest percentages. The conjunct roots and stem of guar (Cyamopsis psoraloides) revealed only 0.019 per cent sulphur; the leaves of kale showed the highest sulphur content, i. e., 2.114%. Apparently there is no correlation between the amounts of S, N and P. The ratio S/N increases from 0.006 (guar) to 0.485 (kale). The ratio S/P, always higher than the corresponding S/N, increases from 0.082 (guar) to 6.381 (older leaves of tomato plants). It is interesting to mention that several among the most important crops in the state of São Paulo namely, cotton, rice, coffee and sugar cane contain more sulphur than phosphorus. 4. Tomato plants cultivated in nutrient solution lacking sulphur showed the following visual symptons of deficiency : chlorosis first in the younger leaves and afterwards in all the leaves; anthocyanin pigments in the petioles and stems; absence of fruits; primary roots stunted and secondary ones longer than in the control plants; stems slender, hard, woody. The histological study of petioles suffering from sulphur deficiency revealed anthocyanin in the parenchyme layer instead of clo-rophyll pigments observed in normal petioles; in the chlorotic leaves the large chloroplasts present only the stroma but the small ones have a little amount of green pigments. Chemical analysis revealed in the abnormal plants : less sulphur and an increased proportion of phosphorus; older leaves contain more sulphur and less phosphorus than the younger ones probably due to physiological difficulties in translocation of sulphur bearing material; increased amount of total N attributed to accumulation of nitrates; marked decrease in ash, sugars and starch; increased proportion of crude fiber and dry material. In the plants suffering from sulphur deficiency photosyntetic rate decreased 34 per cent. 5. Tomato plants were succesfully cultivated in nutrient solution in absence of mineral sulphur but in presence of cysteine. The plants absorbed sulphur, under that form and were able to grow up quite well; the fruiting was normal. In this way rested cleary demonstrated the possibility of absorption of organic sulphur without previous mineralization and its utilization in the building up of protein molecules.

Estudos sôbre a alimentação mineral da mandioca (Manihot utilissima Pohl.)

1. The present work was carried out to study the effects of mineral nutrients in the yield as well as in the composition of cassava roots. The variety "Branca de Sta. Catarina" was grown by the sand culture method, the following treatments being used: N0 P0 K0, N0 P1 Kl, N1 P0 K1, N2 P1 K0, N2 P1 K1, N1 P2 K1, and N1 P1 K2, where the figures 0, 1, and 2 denote the relative proportion of a given element. The nutrients were given as follows: N = 35 grams of ammonium nitrate per pot loaded with 120 pounds of washed sand; P1 = 35 grams of monocalcium phosphate; Kl = 28 grams of sulfate of potash. Besides those fertilizers, each pot received 26 grams of magnesium sulfate and weekly doses of micronutrients as indicated by HOAGLAND and ARNON (1939). To apply the macronutrients the total doses were divided in three parts evenly distributed during the life cycle of cassava. 2. As far yield of roots and foliage are concerned, there are a few points to be considered: 2.1. the most striking effect on yield was verified when P was omitted from the fertilization; this treatment gave the poorest yields of the whole experiment; the need of that element for the phosphorylation of the starchy reserves explains such result; 2.2. phosphorus and nitrogen, under the experimental conditions, showed to be the most important nutrients for cassava; the effect of potassium in the weight of the roots produced was much less marked; it is noteworthy to mention, that in absence of potassium, the roots yield decreased whereas the foliage increased; as potassium is essential for the translocation of carbohydrates it is reasonable to admit that sugars produced in the leaves instead of going down and accumulate as starch in the roots were consumed in the production of more green matter. 3. Chemical analyses of roots revealed the following interesting points: 3.1. the lack of phosphorus brought about the most drastic reduction in the starch content of the roots; while the treatment N1 P1 K1 gave 32 per cent of starch, with NI PO Kl the amount found was 25 per cent; this result can be explained by the requirement of P for the enzymatic synthesis of starch; it has to be mentioned that the decrease in the starch content was associated with the remarkable drop in yield observed when P was omitted from the nutrient medium; 3.2. the double dosis of nitrogen in the treatment N2 P1 K1, gave the highest yields; however the increase in yield did not produce any industrial gain: whereas the treatment N1 P1 K1 gave 32 per cent of starch, by raising the N level to N2, the starch content fell to 24 per cent; now, considering the total amount of starch present in the roots, one can see, that the increase in roots yield did not compensate for the marked decrease in the starch content; that is, the amount of starch obtained with N1 P1 K1 does not differ statistically from the quantity obtained with N2 P1 K1; as far we know facts similar to this had been observed in sugar beets and sugar cane, as a result of the interaction between nitrogen and sugar produced; the biochemical aspect of the problem is very interesting: by raising the amount of assimilable nitrogen, instead of the carbohydrates polymerize to starch, they do combine to the amino groups to give proteinaceous materials; actually, it did happen that the protein content increased from 2.91 to 5.14 per cent.

Experiências de adubação mineral e orgânica com Capim Kikuyu (Pennisetum clandestinum Hochst.)

Kikuio grass (Pennisetum clandestinum Hochst) is beyond any doubt, a pasture very important for farm animals; since its chemical composition is very similar to that of alfalfa, the present field trial was carried out; a randomized block design with 8 treatments was selected as follows: 1 N - P - K - Ca - Mg (complete manuring) 2 N - P - K - Ca----- (without Mg) 3 N - P - K-------Mg (without Ca) 4 ----P - K - Ca - Mg (without N) 5 N------K - Ca Mg (without P) 6 N - P - Ca - Mg (without K) 7 organic matter (without mineral fertilizers) 8 control Nitrogen was applied as NaN03 (topdressed) and as ammonium sulfate; P2O5 was given as superphosphate associated to bonemeal; K2O was applied as muriate, CaO as "sambaquis" (oyster shells); MgO was given as MgSO4 (topdressed). The source of organic matter was farmyard manure. As far yields are concerned the following observations were made: 1. treatment n. 7 was superior to all others; 2. considering the mineral fertilizers, good responses were due to N and P2O5; 3. the control yield was exceedingly poor, being inferior to all the others treatments; The chemical analyses revealed that: 1. the protein content decreased accordingly to this order: 7, 6, 5 and 1; treatment 4 (without N) gave the lowest protein content; 2. treatment n. 4 produced the highest fat content; treatment no. 7 ranked second; no. 8 gave the lowest fat content; 3. crude fiber: highest - treatment 7; lowest - 8; 4. ashes: the ashes content was higher in treatment 5; proprobably because the most abundant element in the ashes is K, the ash content of treatment 6 (no K) was very low; 5. non nitrogenous substances (determined by difference) - high in treatment 8 and low in treatment 7; 6. mineral elements in the ashes - the element omitted from a given treatment was very low in the grasses therein obtained; this shows the relative poverty of the soil in that element. As general remark the Authors suggest the use of farmyard manure in the fertilization of Kikuio grass; farmyard manure could probably substitute wither green manure or compost.

Sôbre a determinação do nitrogênio, do fósforo e do potássio no mesmo extrato

The determination of total nitrogen, phosphorus, and potassium in plant material can be carried out in a common extract prepared with sulphuric acid and 30 per cent hydrogen peroxide. Nitrogen is estimated by direct nesslerization of a suitable aliquot (1-5 ml of the 50 ml extract made out of 250 mg of dried material); in order to avoid excessive acidity, 10 ml of Nessler's reagent should be employed. An aliquot of 1-5 ml suffices for the colorimetric determination of phosphorus by the molybdenum method; to reduce the phosphomolybdate complex 2 ml of a 2% SnC12 soln are necessary. Potassium is determined by the cobaltinitrite method after elimination of ammonium salts with the aid of aqua-regia.