900 resultados para Musculoskeletal manipulations
Resumo:
QUESTIONS UNDER STUDY: We assessed the occurrence and aetiology of chest pain in primary care practice. These features differ between primary and emergency care settings, where most previous studies have been performed. METHODS: 59 GPs in western Switzerland recorded all consecutive cases presenting with chest pain. Clinical characteristics, laboratory tests and other investigations as well as the diagnoses remaining after 12 months of follow-up were systematically registered. RESULTS: Among 24,620 patients examined during a total duration of 300 weeks of observation, 672 (2.7%) presented with chest pain (52% female, mean age 55 +/- 19(SD)). Most cases, 442 (1.8%), presented new symptoms and in 356 (1.4%) it was the reason for consulting. Over 40 ailments were diagnosed: musculoskeletal chest pain (including chest wall syndrome) (49%), cardiovascular (16%), psychogenic (11%), respiratory (10%), digestive (8%), miscellaneous (2%) and without diagnosis (3%). The three most prevalent diseases were: chest wall syndrome (43%), coronary artery disease (12%) and anxiety (7%). Unstable angina (6), myocardial infarction (4) and pulmonary embolism (2) were uncommon (1.8%). Potentially serious conditions including cardiac, respiratory and neoplasic diseases accounted for 20% of cases. A large number of laboratory tests (42%), referral to a specialist (16%) or hospitalisation (5%) were performed. Twentyfive patients died during follow-up, of which twelve were for a reason directly associated with thoracic pain [cancer (7) and cardiac causes (5)]. CONCLUSIONS: Thoracic pain was present in 2.7% of primary care consultations. Chest wall syndrome pain was the main aetiology. Cardio - vascular emergencies were uncommon. However chest pain deserves full consideration because of the occurrence of potentially serious conditions.
Resumo:
BACKGROUND: The extent to which physical performance limitations affect the ability of childhood cancer survivors to reach healthy activity levels is unknown. Therefore this study aims to describe the effect of different types of limitations on activity levels in survivors. PROCEDURE: Within the Swiss Childhood Cancer Survivor Study we sent a questionnaire to all survivors (≥16 years) registered in the Swiss Childhood Cancer Registry, who survived >5 years and were diagnosed 1976-2005 aged <16 years. We measured healthy activity levels using international guidelines and assessed different kinds of performance limitations (visual impairment, weight and endurance problems, cardiorespiratory, musculoskeletal, and neurological problems, pain and fatigue syndromes). RESULTS: The sample included 1,560 survivors (75% response rate), of whom 209 (13.5%) reported they have performance limitations. Forty-two percent of survivors with limitations reached healthy activity levels, compared to 57% of survivors without limitations. Least active were survivors with vision impairments (25% active), weight and endurance problems (27.3%), cardiorespiratory problems (36.4%), and musculoskeletal problems (43.1%). After adjusting for socio-demographic variables and type of cancer, we found that survivors with limitations were 1.4 (95%CI 1.0-2.0; P = 0.047) times more likely to be inactive. CONCLUSIONS: Although many survivors with physical performance limitations maintain healthy activity levels, there is room for improvement. Adapted and targeted physical activity counseling for survivors with performance limitations might help them to raise level of activity and pursue a healthy lifestyle.
Resumo:
OBJECTIVE: The purpose of this article is to assess the effect of the adaptive statistical iterative reconstruction (ASIR) technique on image quality in hip MDCT arthrography and to evaluate its potential for reducing radiation dose. SUBJECTS AND METHODS: Thirty-seven patients examined with hip MDCT arthrography were prospectively randomized into three different protocols: one with a regular dose (volume CT dose index [CTDIvol], 38.4 mGy) and two with a reduced dose (CTDIvol, 24.6 or 15.4 mGy). Images were reconstructed using filtered back projection (FBP) and four increasing percentages of ASIR (30%, 50%, 70%, and 90%). Image noise and contrast-to-noise ratio (CNR) were measured. Two musculoskeletal radiologists independently evaluated several anatomic structures and image quality parameters using a 4-point scale. They also jointly assessed acetabular labrum tears and articular cartilage lesions. RESULTS: With decreasing radiation dose level, image noise statistically significantly increased (p=0.0009) and CNR statistically significantly decreased (p=0.001). We also found a statistically significant reduction in noise (p=0.0001) and increase in CNR (p≤0.003) with increasing percentage of ASIR; in addition, we noted statistically significant increases in image quality scores for the labrum and cartilage, subchondral bone, overall diagnostic quality (up to 50% ASIR), and subjective noise (p≤0.04), and statistically significant reductions for the trabecular bone and muscles (p≤0.03). Regardless of the radiation dose level, there were no statistically significant differences in the detection and characterization of labral tears (n=24; p=1) and cartilage lesions (n=40; p≥0.89) depending on the ASIR percentage. CONCLUSION: The use of up to 50% ASIR in hip MDCT arthrography helps to reduce radiation dose by approximately 35-60%, while maintaining diagnostic image quality comparable to that of a regular-dose protocol using FBP.
Resumo:
High performance liquid chromatography (HPLC) is the reference method for measuring concentrations of antimicrobials in blood. This technique requires careful sample preparation. Protocols using organic solvents and/or solid extraction phases are time consuming and entail several manipulations, which can lead to partial loss of the determined compound and increased analytical variability. Moreover, to obtain sufficient material for analysis, at least 1 ml of plasma is required. This constraint makes it difficult to determine drug levels when blood sample volumes are limited. However, drugs with low plasma-protein binding can be reliably extracted from plasma by ultra-filtration with a minimal loss due to the protein-bound fraction. This study validated a single-step ultra-filtration method for extracting fluconazole (FLC), a first-line antifungal agent with a weak plasma-protein binding, from plasma to determine its concentration by HPLC. Spiked FLC standards and unknowns were prepared in human and rat plasma. Samples (240 microl) were transferred into disposable microtube filtration units containing cellulose or polysulfone filters with a 5 kDa cut-off. After centrifugation for 60 min at 15000g, FLC concentrations were measured by direct injection of the filtrate into the HPLC. Using cellulose filters, low molecular weight proteins were eluted early in the chromatogram and well separated from FLC that eluted at 8.40 min as a sharp single peak. In contrast, with polysulfone filters several additional peaks interfering with the FLC peak were observed. Moreover, the FLC recovery using cellulose filters compared to polysulfone filters was higher and had a better reproducibility. Cellulose filters were therefore used for the subsequent validation procedure. The quantification limit was 0.195 mgl(-1). Standard curves with a quadratic regression coefficient > or = 0.9999 were obtained in the concentration range of 0.195-100 mgl(-1). The inter and intra-run accuracies and precisions over the clinically relevant concentration range, 1.875-60 mgl(-1), fell well within the +/-15% variation recommended by the current guidelines for the validation of analytical methods. Furthermore, no analytical interference was observed with commonly used antibiotics, antifungals, antivirals and immunosuppressive agents. Ultra-filtration of plasma with cellulose filters permits the extraction of FLC from small volumes (240 microl). The determination of FLC concentrations by HPLC after this single-step procedure is selective, precise and accurate.
Resumo:
El tratamiento de las enfermedades reumáticas está condicionado por el hecho que, en su mayoría, son procesos de carácter crónico, y que salvo en contadas excepciones, como por ejemplo las artritis infecciosas, no existen tratamientos curativos. Por ello, el objetivo lógico de curar se debe de sustituir por aliviar y conservar.
Resumo:
BACKGROUND: Articular surfaces reconstruction is essential in total shoulder arthroplasty. Because of the limited glenoid bone support, thin glenoid component could improve anatomical reconstruction, but adverse mechanical effects might appear. METHODS: With a numerical musculoskeletal shoulder model, we analysed and compared three values of thickness of a typical all-polyethylene glenoid component: 2, 4 (reference) and 6mm. A loaded movement of abduction in the scapular plane was simulated. We evaluated the humeral head translation, the muscle moment arms, the joint force, the articular contact pattern, and the polyethylene and cement stress. Findings Decreasing polyethylene thickness from 6 to 2mm slightly increased humeral head translation and muscle moment arms. This induced a small decreased of the joint reaction force, but important increase of stress within the polyethylene and the cement mantel. Interpretation The reference thickness of 4mm seems a good compromise to avoid stress concentration and joint stuffing.
Resumo:
Purpose: Polyethylene wear is a recurrent problem in joint arthroplasty. Small debris particles are also associated to inflammation reaction of the surrounding bone, eventually leading to the failure of the bound between the implant and the host bone, and implant loosening. The goal of this study was thus to estimate the volume of polyethylene wear of a reversed prosthesis, and compare it to an anatomic prosthesis, during one year of activities of daily living. Material and Methods: A numerical musculoskeletal model of the glenohumeral joint was used for this comparative study. The reversed (RP) and anatomic (AP) Aequalis prostheses were positioned in the numerical model. Eight levels of abduction were considered. Their daily frequency was estimated from in-vivo recorded data on healthy volunteers during activities of daily living. One year of use was simulated to predict the linear and volumetric wear. The volumetric wear was the difference of volume between the original and worn component. Results: With the AP, the contact pattern on the glenoid surface moved rapidly from the inferior to the superior side during the first 30 degrees of abduction, and then went back to the inferior side. With the RP, the contact pattern on the humeral cup surface remained at the inferior side. Contact pressure was 20 times lower with the RP than with the AP. One year of use produced a maximum linear wear of 0.2 mm with the AP, and 0.13 mm with the RP. However, the volumetric wear was 8.4 mm3 with the AP, but reached 44.6 mm3 with the RP. Conclusion: Polyethylene particles are a matter of concern with AP. Infiltration of these particles within the bone-implant interface can induce a implant loosening. This problem should not be underestimated with RP. It might be associated to a higher level of humeral stem loosening reported with RP. The long term survival of RP might be improved by using a highly cross-linked polyethylene, which has a better abrasion resistance but lower plastic resistance.
Resumo:
OBJECTIVE: To determine the association of changes on nailfold capillaroscopy with clinical findings and genotype in children with juvenile dermatomyositis (DM), in order to identify potential differences in disease course over 36 months. METHODS: At diagnosis of juvenile DM in 61 children prior to the initiation of treatment, tumor necrosis factor alpha (TNFalpha) -308 allele and DQA1*0501 status was determined, juvenile DM Disease Activity Scores (DAS) were obtained, and nailfold capillaroscopy was performed. The disease course was monitored for 36 months. Variations within and between patients were assessed by regression analysis. RESULTS: At diagnosis, shorter duration of untreated disease (P = 0.05) and a lower juvenile DM skin DAS (P = 0.035) were associated with a unicyclic disease course. Over 36 months, end-row loop (ERL) regeneration was associated with lower skin DAS (P < 0.001) but not muscle DAS (P = 0.98); ERL regeneration and decreased bushy loops were associated with a shorter duration of untreated disease (P = 0.04 for both). At 36 months, increased ERL regeneration (P = 0.007) and improvement of skin DAS (P < 0.001) and muscle DAS (P = 0.025) were associated with a unicyclic disease course. CONCLUSION: Early treatment of juvenile DM may lead to a unicyclic disease course. The non-unicyclic disease course usually involves continuing skin manifestations with persistent nailfold capillaroscopy changes. The correlation of nailfold capillaroscopy results with cutaneous but not with musculoskeletal signs of juvenile DM over a 36-month period suggests that the cutaneous and muscle vasculopathies have different pathophysiologic mechanisms. These findings indicate that efforts to identify the optimal treatment of cutaneous features in juvenile DM require greater attention.
Resumo:
Les médecins de premiers recours (MPR) sont parmi les spécialistes les plus souvent confrontés aux problèmes de santé liés au travail. Les atteintes de l'appareil locomoteur (rachis ou extrémités) et les problèmes psychiques sont les principales pathologies liées au travail rencontrées par leur patient. Dans ce contexte, il est essentiel pour le MPR de pouvoir identifier le lien entre l'atteinte à la santé et le contexte professionnel afin de conduire une prise en charge adaptée. Cet article aborde, par deux vignettes cliniques, les aspects sémiologiques et thérapeutiques du syndrome d'épuisement professionnel (burnout) et des troubles musculosquelettiques du membre supérieur. Il propose des repères au MPR pour orienter sa pratique dans une approche multidimensionnelle tournée aussi bien vers le patient que sur son environnement professionnel.
Resumo:
Objective: To analyze the atmosphere inside incubators regarding alcoholic solvent such as isopropanol or ethanol which are commonly used in hand disinfecting solutions. Design: Observational. Setting: The third level neonatal unit of the Centre Hospitalier Universitaire Vaudois, Lausanne, Switzerland. Patients: Nine neonates with median (range) gestational age of 29 4/7 (25 5/7-39 0/7) weeks and birth weight of 960 (550-3050) grams. All neonates were inside incubators. Interventions: Alcoholic vapors inside incubators were directly and cumulatively measured by photoionisation and gas chromatography respectively after absorption on a charcoal sampling tube. Results: Eleven studies (mean study time: 230 ± 19 minutes) were performed. Highly variable isopropanol/ethanol concentrations profiles were found inside incubators. Peak value for isopropanol was 1982 part per million and for ethanol was 906 part per million. Conclusions: Incubators' inner atmosphere can be highly polluted by alcohol vapors. To reduce them staff should respect long evaporation time between hands disinfection and manipulations inside incubators. The use of an ethanol-based disinfecting solution, because of its short evaporation time, could be favored. As alcohol vapor toxicity for neonate remains largely unknown, further studies could be welcome.