Resource use and greenhouse gas emissions from grain-finishing beef cattle in seven Australian feedlots: a life cycle assessment

Grain finishing of cattle has become increasingly common in Australia over the past 30 years. However, interest in the associated environmental impacts and resource use is increasing and requires detailed analysis. In this study we conducted a life cycle assessment (LCA) to investigate impacts of the grain-finishing stage for cattle in seven feedlots in eastern Australia, with a particular focus on the feedlot stage, including the impacts from producing the ration, feedlot operations, transport, and livestock emissions while cattle are in the feedlot (gate-to-gate). The functional unit was 1 kg of liveweight gain (LWG) for the feedlot stage and results are included for the full supply chain (cradle-to-gate), reported per kilogram of liveweight (LW) at the point of slaughter. Three classes of cattle produced for different markets were studied: short-fed domestic market (55–80 days on feed), mid-fed export (108–164 days on feed) and long-fed export (>300 days on feed). In the feedlot stage, mean fresh water consumption was found to vary from 171.9 to 672.6 L/kg LWG and mean stress-weighted water use ranged from 100.9 to 193.2 water stress index eq. L/kg LWG. Irrigation contributed 57–91% of total fresh water consumption with differences mainly related to the availability of irrigation water near the feedlot and the use of irrigated feed inputs in rations. Mean fossil energy demand ranged from 16.5 to 34.2 MJ lower heating values/kg LWG and arable land occupation from 18.7 to 40.5 m2/kg LWG in the feedlot stage. Mean greenhouse gas (GHG) emissions in the feedlot stage ranged from 4.6 to 9.5 kg CO2-e/kg LWG (excluding land use and direct land-use change emissions). Emissions were dominated by enteric methane and contributions from the production, transport and milling of feed inputs. Linear regression analysis showed that the feed conversion ratio was able to explain >86% of the variation in GHG intensity and energy demand. The feedlot stage contributed between 26% and 44% of total slaughter weight for the classes of cattle fed, whereas the contribution of this phase to resource use varied from 4% to 96% showing impacts from the finishing phase varied considerably, compared with the breeding and backgrounding. GHG emissions and total land occupation per kilogram of LWG during the grain finishing phase were lower than emissions from breeding and backgrounding, resulting in lower life-time emissions for grain-finished cattle compared with grass finishing.

Foreign direct investment motives and location decision factors under economic recession: Three cases of Finnish FDI in Portugal

The purpose of this thesis was to study how uncertainty in economic conditions of the FDI host country affects location decision of an investment, and what kinds of motives are behind the investment decision to a country in economic recession, in this case Portugal. The country has attracted foreign direct investment steadily, but it is evident that most multinational firms and investors tend to be more interested in emerging economies in general. The aim was to find out also which host country specific advantages are important in this kind of cross-border investment and which factors are important for an FDI to succeed under economic uncertainty at the host country. The study was done by analyzing three Finnish case companies: a private equity and real estate investment firm Pontos Group, A wave energy technology research and development company AW Energy and NSN, Nokia Solutions and Networks, a global telecommunications company. The research was done empirically, by interviewing experts on the subject, mainly persons representing these companies. In addition relevant articles, journals and content from case companies’ web-pages is used for the desk research regarding the topic. The results of this thesis showed that the FDIs with strategic asset-seeking investments seem most profitable FDI types under uncertain economic conditions. This kind of investments aim to strengthen the company’s long-term strategy, including the time after recession. Firm-specific ownership advantages that bring competitive advantage proved out to be important under these circumstances, as well as first-mover advantages and externally created assets such as government promotional policies regarding FDI incentives. Also the location was considered suitable for resource- or efficiency seeking motives, based on the lowered price level at the host country. Problems were related mainly to financing, but as foreign companies receive financing usually from their home countries, the economic recession of the host country does not have significant effect for FDI decision, according to this study

Transition to Product Service Systems: methodology based on scenarios identification, modelling and evaluation

Part 4: Transition Towards Product-Service Systems

Jerónimo Martins and internal social responsibility : a case study on employee awareness

Mestrado em Ciências Empresariais

Mercury contamination in fanned fish setup on former garimpo mining areas in the Northern Mato Grosso State, Amazonian region, Brazil

The garimpo gold mining activity has released about 2.500 tons of mercury in the Brazilian Amazonian environment in the 1980-1995 period. The northern region of Mato Grosso State, an important gold mining and trading area during the Arnazonian gold rush is now at a turning point regarding its economic future. Nowadays, the activities related to gold mining have only a low relevance on its economy. Thus, the local communities are looking for economic alternatives for the development of the region. Cooperative fish farming is one of such alternatives. However, some projects are directly implemented on areas degraded by the former garimpo activity and the mercury left behind still poses risks, especially by its potential accumulation in fish. The objective of the present study was to evaluate the levels of mercury contamination in two fish farming areas, Paranaita and Alta Floresta, with and without records of past gold-washing activity, respectively. Data such as mercury concentration in fish of different trophic level, size, and weight as well as the water physical and chemical parameters were measured and considered. These preliminary data have shown no significant difference between these two fish fanning areas, relatively to mercury levels in fish. (c) 2004 Elsevier B.V. All rights reserved.

The Amplifier - v. 13, no. 2

In this issue...Faculty Women's Club, Miss Montana, Mining Museum, Climbing Club, NASA, Butte Civic Center, Oredigger Football, Mrs. Loretta Peck, Library Remodel

The Amplifier - v. 15, no. 4

In this issue...Pintlar Peaks, SUB, Bridge Building Contest, Senator Mike Mansfield, Montana Mining Law, Mathematics, Theta Tau, Marcus Daly, Coeds

The Amplifier - v. 15, no. 6

In this issue...Football, Coach Bob Riley, Financial Aid, Handi Wrap, Gless Peak, Antarctic, Vietnam, Crowd Control, Climbing Club, Beard Growing Contest, Kopper Kadets

The Use of Cryogenic Air in Supplied Air Respiratory Protection

The Mine Improvement and New Emergency Response (MINER) Act of 2006 implemented new regulations in the underground coal mining industry that allow for the certification of non-compressed gas equipment for respiratory protection in underground coal mines. NASA’s Kennedy Space Center (KSC) Biomedical Research and Engineering Laboratory (BRL) is investigating the potential to expand cryogenic air supply systems into the mining and general industries. These investigations have, so far, resulted in four separate comparison and hardware development programs. The Propellant Handlers Ensemble (PHE) and Level “A” Ensemble Comparison (LAE): This study compared worker thermal stress while using the industry standard Level A hazardous material handling ensemble as opposed to using the similarly protective Propellant Handler’s Ensemble (PHE) that utilizes a cryogenic air supply pack, known as an Environmental Control Unit (ECU) as opposed to the compressed air Self Contained Breathing Apparatus (SCBA) used in the LAE. The research found that, in a 102°F environment, test subjects experienced significantly decreased body temperature increases, significantly decreased heart rate increases, and decreased sweat loss while performing a standard work routine while using the PHE, compared to the same test subjects performing the same routine while using the LAE. The Cryogenic Refuge Alternative Supply System (CryoRASS) project: The MINER Act of 2006 requires the operators of underground coal mines to provide refuge alternatives that can provide a safe atmosphere for workers for up to 96 hours in the event of a mine emergency. The CryoRASS project retrofitted an existing refuge chamber with a liquid air supply instead of the standard compressed air supply system and performed a 96 hour test. The CryoRASS system demonstrated that it provided a larger air supply in a significantly smaller footprint area, provided humidity and temperature control, and maintained acceptable oxygen and carbon dioxide levels in the chamber for the required amount of time. SCBA and Mine Rescue System (CryoBA/CryoASFS) Another requirement of the MINER Act is that additional emergency breathing equipment must be staged along evacuation routes to supplement the Self Contained/Self Rescue (SCSR) devices that are now required. The BRL has developed an SCBA known as the Cryogenic Breathing Apparatus (CryoBA), that has the ability to provide 2 hours of breathing air, a refill capability, and some cooling for the user. Cryogenic Air Storage and Filling Stations (CryoASFS) would be positioned in critical areas to extend evacuation time. The CryoASFS stations have a significantly smaller footprint and larger air storage capacity to similar compressed air systems. The CryoBA pack is currently undergoing NIOSH certification testing. Technical challenges associated with liquid breathing air systems: Research done by the BRL has also addressed three major technical challenges involved with the widespread use of liquid breathing air. The BRL developed a storage Dewar fitted with a Cryorefrigerator that has stored liquid air for four months with no appreciable oxygen enrichment due to differential evaporation. Testing of liquid breathing air was material and time intensive. A BRL contract developed a system that only required 1 liter of air and five minutes of time compared to the 10 liters of air and 75 minutes of time required by the old method. The BRL also developed a simple and cost effective method of manufacturing liquid air that joins a liquid oxygen tanker with a liquid nitrogen tanker through an orifice controlled “Y” fitting, mixing the two components, and depositing the mixed breathing air in a separate tanker.

Evaluación de la exposición laboral a sílice en empresas de diferentes sectores económicos en Colombia

Introducción: La sílice es un elemento de fácil aprovechamiento y por sus características fisicoquímicas ha sido ampliamente empleado en la industria como objetivo, materia prima o subproducto que genera silicosis en los trabajadores que han estado expuestos a polvo de sílice a través de los años y es una enfermedad que progresa incluso cuando la exposición cesa. La silicosis es conocida como una enfermedad de alta e histórica incidencia y prevalencia a nivel mundial, por lo que es necesario evaluar la exposición laboral a sílice (fracción respirable) en empresas pertenecientes a diferentes sectores económicos que están afiliadas una ARL en Colombia, para contribuir con información diagnóstica actualizada en diferentes regiones y en variadas actividades económicas. Objetivos: Evaluar la exposición laboral a sílice y el nivel de riesgo en empresas afiliadas a una ARL de acuerdo con su ubicación geográfica, actividad económica, área de trabajo, cargo y relacionar las medidas de control empleadas en cada empresa. Materiales y métodos: Se llevó a cabo un estudio de corte transversal sobre 239 mediciones de higiene industrial de 159 empresas de diferentes actividades través de la asociación de variables ocupacionales con las características de la exposición a sílice. Las variables cuantitativas fueron calculadas empleando medidas de tendencia central como media y mediana y medidas de dispersión como rango y desviación estándar con sus correspondientes coeficientes de variación. El nivel máximo permisible o TLV establecido de acuerdo con los parámetros señalados por la Conferencia Americana de Higienistas Industriales Gubernamentales (ACGIH en inglés) y empleado en este estudio para sílice cristalina, fue de 0,025 mg/m3. Resultados: Las actividades económicas que reportaron las mayores concentraciones corregidas a condiciones estándar de polvo de sílice fueron: la minería y actividades Extractivas con 6,340 mg/m3, el mantenimiento industrial, montajes electromecánicos y civiles con 1,312 mg/m3, la maquinaria, metalmecánica, electrodomésticos y equipos con 0,096 mg/m3 y la construcción con 0,702 mg/m3; Discusión: Se realizó un análisis segmentado en dos grupos A y B de acuerdo con el tiempo de medición, se encontró que para el índice de riesgo en ambos grupos indican una sobre-exposición de los trabajadores a niveles críticos, razón por la cual es necesario generar una estrategia de intervención que permita disminuir a tiempo las concentraciones de sílice en las áreas de trabajo y así reducir la exposición de los trabajadores.

Quality and Aspect based Argument Generation

Natural Language Processing has always been one of the most popular topics in Artificial Intelligence. Argument-related research in NLP, such as argument detection, argument mining and argument generation, has been popular, especially in recent years. In our daily lives, we use arguments to express ourselves. The quality of arguments heavily impacts the effectiveness of our communications with others. In professional fields, such as legislation and academic areas, arguments of good quality play an even more critical role. Therefore, argument generation with good quality is a challenging research task that is also of great importance in NLP. The aim of this work is to investigate the automatic generation of arguments with good quality, according to the given topic, stance and aspect (control codes). To achieve this goal, a module based on BERT [17] which could judge an argument's quality is constructed. This module is used to assess the quality of the generated arguments. Another module based on GPT-2 [19] is implemented to generate arguments. Stances and aspects are also used as guidance when generating arguments. After combining all these models and techniques, the ranks of the generated arguments could be acquired to evaluate the final performance. This dissertation describes the architecture and experimental setup, analyzes the results of our experimentation, and discusses future directions.

Magnetização remanescente: um parâmetro crucial para a interpretação e modelamento de anomalias magnéticas em território brasileiro

A questão da magnetização remanescente na interpretação de anomalias magnéticas é frequentemente negligenciada, principalmente em função da dificuldade em se lidar com a mesma. Na maioria dos casos, tanto nos trabalhos acadêmicos quanto nos modelos que circulam nos meios profissionais da exploração mineral e de petróleo, assume-se que a magnetização remanescente é desprezível e utiliza-se apenas a induzida. O presente artigo mostra que o uso desse parâmetro é particularmente importante no tocante às anomalias magnéticas brasileiras, e procura fornecer subsídios para o uso desta informação. Discute-se o uso de duas técnicas consagradas, a Redução ao Pólo e o Sinal Analítico, em anomalias brasileiras com e sem magnetização remanescente. Mostramos a aplicação da técnica de determinação da magnetização total, permitindo que os modelos sejam construídos a partir da resultante da soma das magnetizações induzida e remanescente, e posteriormente apresentamos uma metodologia de uso da informação remanescente na datação das rochas fonte.

Greenhouse gases emission from soil contaminated with automobile industry residue in Brazil

Solid waste of the automobile industry containing large amounts of heavy metals might affect the emission of greenhouse gases (GHG) when applied to the soil. Accumulation of inorganic chemical elements in the environment generally occurs due to human activity (industry, agriculture, mining and waste landfills). Residues from human activities may release heavy metals to the soil solution, causing toxicity to plants and other soil organisms. Heavy metals may also be adsorbed to clay minerals and/or complexed by the soil organic matter, becoming a potential source of pollutants. Not much is known about the behavior of solid wastes in tropical soil as regarded as source of greenhouse gases (GHG). The emission of GHG (CO(2), CH(4) and N(2)O) was evaluated in incubated soil samples collected in an area contaminated with a solid residue from an automobile industry. Samples were randomly collected at 0 to 0.2 m (a mix of soil and residue), 0.2 to 0.4 m (only residue) and 0.4 to 0.6 m (only soil). A contiguous uncontaminated area, cultivated with sugarcane, was also sampled following the same protocol. Canonical Discriminant Analysis and Principal Component Analysis were applied to the data to evaluate the GHG emission rates. Emission rates of GHG were greater in the samples from the contaminated than the sugarcane area, particularly high during the first days of incubation. CO(2) emissions were greater in samples collected at the upper layer for both areas, while CH(4) and N(2)O emissions were similar in all samples. The emission rates of CH(4) were the most efficient variables to differentiate contaminated and uncontaminated areas.