935 resultados para Mobile technologies
Resumo:
Background: Mobile-bearing knee replacements have some theoretical advantages over fixed-bearing devices. However, very few randomized controlled clinical trials have been published to date, and studies showed little clinical and subjective advantages for the mobile-bearing using traditional systems of scoring. The choice of the ideal outcome measure to assess total joint replacement remains a complex issue. However, gait analysis provides objective and quantifying evidences of treatment evaluation. Significant methodological advances are currently made in gait analysis laboratories and ambulatory gait devices are now available. The goal of this study was to provide gait parameters as a new objective method to assess total knee arthroplasty outcome between patients with fixed- and mobile-bearing, using an ambulatory device with minimal sensor configuration. Methods: This randomized controlled double-blind study included to date 31 patients: the gait signatures of 12 patients with mobile-bearing were compared to the gait signatures of 19 patients with fixed-bearing pre-operatively and post-operatively at 6 weeks, 3 months and 6 months. Each participant was asked to perform two walking trials of 30m long at his/her preferred speed and to complete a EQ-5D questionnaire, a WOMAC and Knee Society Score (KSS). Lower limbs rotations were measured by four miniature angular rate sensors mounted respectively, on each shank and thigh. Results: Better relative differences between pre-operative and post-operative 3 months and 6 months KSS (122% vs 34% at 3 months, 138% vs 36% at 6 months) and KSS function (154% vs 8% at 3 months, 183% vs 42% at 6 months) scores were observed for the fixed-bearing compared to the mobile-bearing. The same better improvements for fixed-bearing were also found with the range of knee angles (Affected side: 31% vs -5% at 3 months, 47% vs 5% at 6 months), (Unaffected side: 16% vs 5% at 3 months, 15% vs 6% at 6 months) and peak swing speeds of shank (Affected side: 18% vs -2% at 3 months, 30% vs 4% at 6 months), (Unaffected side: 8% vs -3% at 3 months, 7% vs 4% at 6 months). Conclusions: A new method for a portable system for gait analysis has been developed with very encouraging results regarding the objective outcome of total knee arthroplasty using mobile- and fixed-bearings.
Resumo:
The movement of Open Educational Resources (OER) is one of the most important trends that are helping education through the Internet worldwide. "Tecnológico de Monterrey" (http://tecvirtual.itesm.mx/) in Mexico, with other Mexican higher education institutions, is creating an Internet/web based repository of OERs and Mobile Resources for the instruction and development of educational researchers at undergraduate, Master's and Doctoral level. There is a lack of open educational resources and material available at the Internet that can help and assist the development and education of educational researchers in Spanish speaking countries. This OER repository is part of a project that is experimenting new technology for the delivery of OERs from one repository (http://catedra.ruv.itesm.mx/) through an indexed OER catalog (http://www.temoa.info/) to mobile devices (Ipod, Iphone, MP3, MP4). This paper presentation will describe and comment about this project: outcomes, best practices, difficulties and technological constraints.
Resumo:
The general perspective of M-technologies and M-Services at the Spanish universities is not still in a very high level when we are ending the first decade of the 21st century. Some Universities and some of their libraries are starting to try out with M-technologies, but are still far from a model of massive exploitation, less than in some other countries. A deep study is needed to know the main reasons, study that we will not do in this paper. This general perspective does not mean that there are no significant initiatives which start to trust in M-technologies from Universities and their libraries. Models based in M-technologies make more sense than ever in open universities and in open libraries. That's the reason why the UOC's Library began in late 90s its first experiences in the M-Technologies and M-Libraries developments. In 1999 the appropriate technology offered the opportunity to carry out the first pilot test with SMS, and then applying the WAP technology. At those moments we managed to link-up mobile phones to the OPAC through a WAP system that allowed searching the catalogue by categories and finding the final location of a document, offering also the address of the library in which the user could loan it. Since then, UOC (and its library) directs its efforts towards adapting the offer of services to all sorts of M-devices used by end users. Left the WAP technology, nowadays the library is experimenting with some new devices like e-books, and some new services to get more feedback through the OPAC and metalibrary search products. We propose the case of Open University of Catalonia, in two levels: M-services applied in the library and M-technologies applied in some other university services and resources.
Resumo:
Aquest document se centra en els casos dels dos principals partits espanyols (PP i PSOE) i catalans (PSC i CDC) en el període immediatament després de les eleccions generals espanyoles de maig de 2008, quan aquests celebraren els seus congressos. En general, es poden distingir tres tipus d'actors: en primer lloc, els ciberactivistes que tracten d'obtenir el reconeixement formal de la seva activitat en els seus partits. Així com, els líders del partit que poden intentar promoure la presència del partit en el ciberespai, però que també poden romandre indecisos perquè no és clar l'impacte electoral a la xarxa del ciberactivisme. Finalment, alguns militants tradicionals (off-line) solen ser reticents al reconeixement del ciberactivisme perquè amenaça les recompenses previstes dins del partit. Aquest article mostra com els nostres partits varen respondre al desafiament del ciberactivisme i arriba a la conclusió que la seva situació electoral, mediada per la seva ideologia, estructura organitzativa i el tipus de militància, poden ajudar-nos a comprendre el grau diferent d'institucionalització en l'organització del partit.
Resumo:
Aquest document de treball es centra específicament en el desenvolupament de la infraestructura de telefonia mòbil a Catalunya com a exemple de tecnologia amb profundes implicacions socials. Esdevé un intent inicial de definir les principals línies de recerca en aquest tema. El projecte que el sosté és emmarcat en el programa de recerca Negrisc, centrat a examinar la negociació del risc en les tecnologies de la informació i de la comunicació. Parteix d'una aproximació que reconeix la natura multidisciplinària del risc i que, per tant, exigeix una aproximació interdisciplinària al seu estudi i a la gestió subsegüent. Aquesta perspectiva emfatitza la necessitat d'integrar els punts de vista dels diferents stakeholders, incloent-hi el públic, en la gestió d'una tecnologia socialment controvertida. Aquest és un pas necessari per a permetre la generació d'algun tipus de consens en el cas del desenvolupament de la infraestructura de telefonia mòbil a Catalunya.
Resumo:
The estimation of camera egomotion is a well established problem in computer vision. Many approaches have been proposed based on both the discrete and the differential epipolar constraint. The discrete case is mainly used in self-calibrated stereoscopic systems, whereas the differential case deals with a unique moving camera. The article surveys several methods for mobile robot egomotion estimation covering more than 0.5 million samples using synthetic data. Results from real data are also given
Resumo:
This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system
Resumo:
This paper is focused on the robot mobile platform PRIM (platform robot information multimedia). This robot has been made in order to cover two main needs of our group, on one hand the need for a full open mobile robotic platform that is very useful in fulfilling the teaching and research activity of our school community, and on the other hand with the idea of introducing an ethical product which would be useful as mobile multimedia information point as a service tool. This paper introduces exactly how the system is made up and explains just what the philosophy is behind this work. The navigation strategies and sensor fusion, where machine vision system is the most important one, are oriented towards goal achievement and are the key to the behaviour of the robot
Resumo:
This paper presents the use of a mobile robot platform as an innovative educational tool in order to promote and integrate different curriculum knowledge. Hence, it is presented the acquired experience within a summer course named ldquoapplied mobile roboticsrdquo. The main aim of the course is to integrate different subjects as electronics, programming, architecture, perception systems, communications, control and trajectory planning by using the educational open mobile robot platform PRIM. The summer course is addressed to a wide range of student profiles. However, it is of special interests to the students of electrical and computer engineering around their final academic year. The summer course consists of the theoretical and laboratory sessions, related to the following topics: design & programming of electronic devices, modelling and control systems, trajectory planning and control, and computer vision systems. Therefore, the clues for achieving a renewed path of progress in robotics are the integration of several knowledgeable fields, such as computing, communications, and control sciences, in order to perform a higher level reasoning and use decision tools with strong theoretical base
Resumo:
This paper discusses predictive motion control of a MiRoSoT robot. The dynamic model of the robot is deduced by taking into account the whole process - robot, vision, control and transmission systems. Based on the obtained dynamic model, an integrated predictive control algorithm is proposed to position precisely with either stationary or moving obstacle avoidance. This objective is achieved automatically by introducing distant constraints into the open-loop optimization of control inputs. Simulation results demonstrate the feasibility of such control strategy for the deduced dynamic model