Frequency of hepatitis B immunity and occupational exposures to body fluids among brazilian medical students at a public university

In the present study the frequencies of immunity against hepatitis B (HB) and of potentially contaminating accidents among medical students of a Brazilian public university were evaluated. Of all the 400 students who should have been immunized, 303 (75.7%), 66.3% of whom were women, answered an anonymous, self-administered questionnaire. Serum anti-HBs were determined in 205 of them and titers > 10 UI/L were considered to be protective. A total of 86.8% of students had received three doses of HB vaccine. The frequency of immunity among women (96.4%) was higher (p = 0.04) than that among men (87.7%). Among those who did not have immunity, 12/13 (92.3%) had been vaccinated before entering medical school. Only 11% of the students with complete vaccination had previously verified serological response to the vaccine. A total of 23.6% reported having been somehow exposed to blood or secretions. Among final-year students, this frequency was 45.0%, being similar among men (47.8%) and women (43.2%). Of all these accidents, 57.7% were due to body fluids coming in contact with mucosa and 42.3% due to cut and puncture accidents. The results from this study show that: 1) the frequency of immunity against HB is high among the evaluated medical students, although verification of response to vaccination is not a concern for them; 2) anti-HBs titers should be verified after complete vaccination and on a regular basis, especially by men; and 3) the frequency of potentially contaminating accidents is high.

Neutralization of bitis parviocula (Ethiopian mountain adder) venom by the south african institute of medical research (SAIMR) antivenom

BACKGROUND: The Ethiopian mountain adder (Bitis parviocula) is a viperid known only from a few locations in southwestern Ethiopia. METHODS: a total of 30 µg of B. arietans and B. parviocula venoms were run on a 10-20% Tricine gel. To assay lethality dose fifty (LD50), five groups of eight mice for each venom were used. Hemorrhagic activity for crude venom was tested. Fibrinogenolytic activity of crude venom was measured using (2.5 mg/mL) of fibrinogen solution and (0.03 mg/mL) of crude venom. Gelatinase activity of the venom was tested on a Kodak X-OMAT TM film. Crude venoms of B. parviocula and B. arietans were tested for their abilities to affect clotting time, clotting rate and platelet function on whole human blood. RESULTS: The (SAIMR) antivenom was confirmed in this study to neutralize the lethal activity of venom from Bitis parviocula. The ED50s of SAIMR antivenom on B. parviocula and B. arietans neutralized half of 18.2 and 66.7 mg of venom, respectively. The hemorrhagic activities (MHDs) of B. parviocula and B. arietans were 0.88 and 1.7 µg, respectively. Bitis arietans and B. parviocula venoms degradated α and β chains at different times. The γ chains remained unaffected. Bitis parviocula venom did not exhibit gelatinase activity, while B. arietans had a MGD of 6.9 µg. At 3 mg/mL, the crude venoms of B. parviocula and B. arietans did not significantly affect clotting time or clotting rate. CONCLUSIONS: The SAIMR antivenom is very effective in neutralizing the venom of B. parviocula and should be considered in treating envenomations by these snakes.

Pandemic influenza A/H1N1 vaccination coverage, adverse reactions, and reasons for vaccine refusal among medical students in Brazil

The aim of this cross-sectional study was to determine, among medical students at a public university in Rio de Janeiro, Brazil, the acceptance of the pandemic influenza A/H1N1 vaccine during the 2010 mass immunization campaign and the vaccine safety in this group and, among unvaccinated students, the reasons for refusing vaccination. Of a total of 858 students, 678 (79%) participated in the study. Vaccination coverage was 60.4% among students aged 20 to 39 years (an age group targeted for vaccination) and 43.8% among those who did not belong to this age group. The most frequent adverse reactions to the vaccine were pain at the injection site (8.7%) and fever (7.9%). There were no serious adverse reactions. Among students aged 20 to 39 years, the most common reasons for refusing the vaccine were "lack of time" (42.4%), "fear of adverse reactions" (41.9%), and "difficult access to the vaccine" (11.5%). Other reasons for vaccine refusal were "uncertainties about vaccine safety and efficacy" and "vaccination was not needed". To increase the acceptance of the influenza vaccine, a comprehensive immunization program should be offered to these students.

Inferior Vena Cava Filter Placement During Pregnancy: an Adjuvant Option When Medical Therapy Fails

The authors present a case of a 27-year-old multiparous woman, with multiple thrombophilia, whose pregnancy was complicated with deep venous thrombosis requiring placement of a vena cava filter. At 15th week of gestation, following an acute deep venous thrombosis of the right inferior limb, anticoagulant therapy with low-molecular-weight heparin (LMWH) was instituted without improvement in her clinical status. Subsequently, at 18 weeks of pregnancy, LMWH was switched to warfarin. At 30th week of gestation, the maintenance of high thrombotic risk was the premise for placement of an inferior vena cava filter for prophylaxis of pulmonary embolism during childbirth and postpartum. There were no complications and a vaginal delivery was accomplished at 37 weeks of gestation. Venal placement of inferior vena cava filters is an attractive option as prophylaxis for pulmonary embolism during pregnancy.

Exploraty Multivariate Statistical Methods Applied to Pharmaceutical Industry CRM Data

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

OCCUPATIONAL EXPOSURES TO BODY FLUIDS AND BEHAVIORS REGARDING THEIR PREVENTION AND POST-EXPOSURE AMONG MEDICAL AND NURSING STUDENTS AT A BRAZILIAN PUBLIC UNIVERSITY

A cross-sectional study was conducted to assess the frequencies and characteristics of occupational exposures among medical and nursing students at a Brazilian public university, in addition to their prevention and post-exposure behavior. During the second semester of 2010, a self-administered semi-structured questionnaire was completed by 253/320 (79.1%) medical students of the clinical course and 149/200 (74.5%) nursing students who were already performing practical activities. Among medical students, 53 (20.9%) suffered 73 injuries, which mainly occurred while performing extra-curricular activities (32.9%), with cutting and piercing objects (56.2%), in the emergency room (39.7%), and as a result of lack of technical preparation or distraction (54.8%). Among nursing students, 27 (18.1%) suffered 37 injuries, which mainly occurred with hollow needles (67.6%) in the operating room or wards (72.2%), and as a result of lack of technical preparation or distraction (62.1%). Among medical and nursing students, respectively, 96.4% and 48% were dissatisfied with the instructions on previously received exposure prevention; 48% and 18% did not always use personal protective equipment; 67.6% and 16.8% recapped used needles; 49.3% and 35.1% did not bother to find out the source patient's serological results post-exposure; and 1.4% and 18.9% officially reported injuries. In conclusion, this study found high frequencies of exposures among the assessed students, inadequate practices in prevention and post-exposure, and, consequently, the need for training in “standard precautions” to prevent such exposures.

User friendly knowledge acquisition system for medical devices actuation

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

HEPATITIS B VACCINATION COVERAGE AND POSTVACCINATION SEROLOGIC TESTING AMONG MEDICAL STUDENTS AT A PUBLIC UNIVERSITY IN BRAZIL

The aim of this cross-sectional study was to determine the hepatitis B vaccination coverage among medical students at a public university in Rio de Janeiro, Brazil, and their compliance with the postvaccination serologic testing recommendations. Of the total of 858 students, 675 (78.7%) participated in the study. Among the participants, 48.9% (95% CI: 45.1% to 52.7%) were vaccinated against hepatitis B (received ≥ 3 doses of the vaccine), 31.6% were not (received 0, 1 or 2 doses), and 19.6% did not know their vaccination status. Hepatitis B vaccination coverage increased from 26.0% among first-year students to 70.6% among sixth-year students while the prevalence of unknown vaccination status decreased from 39.7% among first-year students to 2.4% among sixth-year students. The frequency of unvaccinated students ranged from 23.7% among fifth-year students to 34.4% among first-year students. Only 34.8% of the vaccinated students performed the anti-HBs testing after vaccination. Among these medical students, we found a low adherence to the hepatitis B vaccination and to the postvaccination serologic testing. A comprehensive hepatitis B immunization program should be offered to students at this medical school.

Balancing and lot-sizing mixed-model lines in the footwear industry

This report describes the full research proposal for the project \Balancing and lot-sizing mixed-model lines in the footwear industry", to be developed as part of the master program in Engenharia Electrotécnica e de Computadores - Sistemas de Planeamento Industrial of the Instituto Superior de Engenharia do Porto. The Portuguese footwear industry is undergoing a period of great development and innovation. The numbers speak for themselves, Portugal footwear exported 71 million pairs of shoes to over 130 countries in 2012. It is a diverse sector, which covers different categories of women, men and children shoes, each of them with various models. New and technologically advanced mixed-model assembly lines are being projected and installed to replace traditional mass assembly lines. Obviously there is a need to manage them conveniently and to improve their operations. This work focuses on balancing and lot-sizing stitching mixed-model lines in a real world environment. For that purpose it will be fundamental to develop and evaluate adequate effective solution methods. Different objectives may be considered, which are relevant for the companies, such as minimizing the number of workstations, and minimizing the makespan, while taking into account a lot of practical restrictions. The solution approaches will be based on approximate methods, namely by resorting to metaheuristics. To show the impact of having different lots in production the initial maximum amount for each lot is changed and a Tabu Search based procedure is used to improve the solutions. The developed approaches will be evaluated and tested. A special attention will be given to the solution of real applied problems. Future work may include the study of other neighbourhood structures related to Tabu Search and the development of ways to speed up the evaluation of neighbours, as well as improving the balancing solution method.

Standarização no IKEA Industry de Paço de Ferreira

Standarização de um posto de trabalho não é mais que definir o melhor método de trabalho que vai ser seguido por todos os operadores que trabalham no mesmo. Uma vez definido esse método, é importante para uma empresa ter noção da produtividade que podem alcançar, dado que pode ser retirado a partir deste método, e é no seguimento disto que surge o estudo dos métodos e tempos, mais concretamente o estudo dos tempos por cronometragem. A aplicação deste estudo foi despoletada pela necessidade do IKEA Industry de Paços de Ferreira, em dar o próximo passo na standarização dos seus postos de trabalho, área a área, e da necessidade de terem uma pessoa em cada área que analisa-se o trabalho que estava a ser feito e calcula-se o tempo de cada rotina. Neste documento, é realizada uma interligação entre os conceitos teóricos que o método exige, como todo o conjunto de fórmulas, restrições, análises e ponderações, com o contexto laboral onde o mesmo foi aplicado e a estratégia desenvolvida pelo IKEA na realização do estudo. O estudo dos métodos e tempos por cronometragem, de todos os métodos existentes, pode ser considerado o mais completo e complexo, uma vez que é mais que observar, registar e retirar uma média ponderada das observações. Este método baseia-se num modelo matemático, que interliga uma série de conceitos e que tem sempre o operador em consideração, seja na avaliação e análise das tarefas que requerem mais esforço dos mesmos, físico ou psicológico, seja em termos de tempos de pausas pessoais que a lei obriga a que as empresas deem. Este detalhe, neste método, é de grande importância, uma vez que a standarização é sempre vista pelos operadores como uma punição. As desvantagens deste método estão no grau de conhecimento e capacidade de observação exigidas ao analista para o executar. Melhor dizendo, um analista que vá executar este trabalho necessita observar muito bem a rotina de trabalho e conhecer onde começa, acaba e tudo o que a ela não pertence, antes de começar a registar seja que tempos forem. Para além disso, é exigido ao analista que perceba o ritmo de trabalho dos operadores através da observação dos mesmos, de modo a que ninguém seja prejudicado. E por fim, é necessária uma grande disponibilidade da parte do analista para retirar o máximo de observações possíveis. Com o intuito de facilitar esta análise, o IKEA Industry criou um ficheiro que compila toda a informação relacionada com o método, e uma explicação de todos os parâmetros que o analista necessita ter em atenção. Esta folha de trabalho foi validada à luz do método, como é possível verificar no decorrer do documento. Um detalhe importante a referir, é que por muito fidedigno que seja este método, tal como qualquer método de standarização, a mínima alteração da rotina de trabalho invalida de imediato o tempo total da rotina, tornando necessário realizar o estudo novamente. Uma vantagem do documento criado pelo IKEA, está na rápida adaptação a estas alterações, uma vez que, caso seja acrescentado ou removido um elemento à rotina, basta alterar o documento, observar e cronometrar os operadores a executar esse novo elemento, e quase automaticamente é definido um novo tempo total padronizado na rotina. Este documento foi criado para fins académicos e de conclusão de um grau académico, mas o estudo quando aplicado na empresa deu origem a contratações, o que só por si mostra as vantagens e impacto que o mesmo pode ter em contexto laboral. Em termos de produtividade, uma vez que a sua aplicação não foi executada a tempo de ser estudada neste documento, não foi possível avaliar a mesma.

On-line system for faults detection in induction motors based on PCA

Dissertation to obtain the degree of Master in Electrical and Computer Engineering

SUSCEPTIBILITY TEST FOR FUNGI: CLINICAL AND LABORATORIAL CORRELATIONS IN MEDICAL MYCOLOGY

SUMMARYDuring recent decades, antifungal susceptibility testing has become standardized and nowadays has the same role of the antibacterial susceptibility testing in microbiology laboratories. American and European standards have been developed, as well as equivalent commercial systems which are more appropriate for clinical laboratories. The detection of resistant strains by means of these systems has allowed the study and understanding of the molecular basis and the mechanisms of resistance of fungal species to antifungal agents. In addition, many studies on the correlation of in vitro results with the outcome of patients have been performed, reaching the conclusion that infections caused by resistant strains have worse outcome than those caused by susceptible fungal isolates. These studies have allowed the development of interpretative breakpoints for Candida spp. and Aspergillus spp., the most frequent agents of fungal infections in the world. In summary, antifungal susceptibility tests have become essential tools to guide the treatment of fungal diseases, to know the local and global disease epidemiology, and to identify resistance to antifungals.

Psychiatric and Psychosocial Predictors of Medical Outcome After Liver Transplantation: a Prospective, Single-Center Study

OBJECTIVE: Recognizing the potential impact of psychiatric and psychosocial factors on liver transplant patient outcomes is essential to apply special follow-up for more vulnerable patients. The aim of this article was to investigate the psychiatric and psychosocial factors predicted medical outcomes of liver transplanted patients. METHODS: We studied 150 consecutive transplant candidates, attending our outpatient transplantation clinic, including 84 who had been grafted 11 of whom died and 3 retransplanted. RESULTS: We observed that active coping was an important predictor of length of stay after liver transplantation. Neuroticism and social support were important predictors of mortality after liver transplantation. CONCLUSION: It may be useful to identify patients with low scores for active coping and for social support and high scores for neuroticism to design special modes of follow-up to improve their medical outcomes.