Prediction of masonry compressive behaviour using a damage mechanics inspired modelling method

Masonry under compression is affected by the properties of its constituents and their interfaces. In spite of extensive investigations of the behaviour of masonry under compression, the information in the literature cannot be regarded as comprehensive due to ongoing inventions of new generation products – for example, polymer modified thin layer mortared masonry and drystack masonry. As comprehensive experimental studies are very expensive, an analytical model inspired by damage mechanics is developed and applied to the prediction of the compressive behaviour of masonry in this paper. The model incorporates a parabolic progressively softening stress-strain curve for the units and a progressively stiffening stress-strain curve until a threshold strain for the combined mortar and the unit-mortar interfaces is reached. The model simulates the mutual constraints imposed by each of these constituents through their respective tensile and compressive behaviour and volumetric changes. The advantage of the model is that it requires only the properties of the constituents and considers masonry as a continuum and computes the average properties of the composite masonry prisms/wallettes; it does not require discretisation of prism or wallette similar to the finite element methods. The capability of the model in capturing the phenomenological behaviour of masonry with appropriate elastic response, stiffness degradation and post peak softening is presented through numerical examples. The fitting of the experimental data to the model parameters is demonstrated through calibration of some selected test data on units and mortar from the literature; the calibrated model is shown to predict the responses of the experimentally determined masonry built using the corresponding units and mortar quite well. Through a series of sensitivity studies, the model is also shown to predict the masonry strength appropriately for changes to the properties of the units and mortar, the mortar joint thickness and the ratio of the height of unit to mortar joint thickness. The unit strength is shown to affect the masonry strength significantly. Although the mortar strength has only a marginal effect, reduction in mortar joint thickness is shown to have a profound effect on the masonry strength. The results obtained from the model are compared with the various provisions in the Australian Masonry Structures Standard AS3700 (2011) and Eurocode 6.

Teaching Entrepreneurship to Undergraduates

This book is deliberatively provocative, and awakens another level of thinking on how to teach entrepreneurship. It will be required reading for entrepreneurship educators and those building a university entrepreneurship programme for years to come.

Teaching Entrepreneurship to Postgraduates

The motivation for this work is to provide a distinct sister volume to Teaching Entrepreneurship to Undergraduates. The first volume sought to promote a learner-centred approach to thinking about how to teach entrepreneurship to undergraduates. This volume seeks to define the difference in thinking between teaching entrepreneurship to postgraduates as opposed to undergraduates. Therefore, a common structure is retained across both volumes, with attention given to both subtle and major differences between the motivation and process of learning related to entrepreneurship education for postgraduates and undergraduates. It is hoped that this sister volume will be as distinctive and innovative in terms of its constant focus on challenging issues, possible solutions to those challenges (based both the author’s practice and that of other educators situated in various global contexts), and probing questions to prompt reflection of your own teaching practice.

Mechanics of transition in an axisymmetric laminar boundary layer on a circular cylinder

Measurements of the growth of artificially generated turbulent spots and intermittency distribution in the transition region on a circular cylinder in axial flow show that the instability Reynolds number of 11,000 has a marked effect on the properties. In particular, it is found that the spot production in the initial region when a single turbulent spot has not yet wrapped around the cylinder and the propagation is essentially two-dimensional, is significantly altered. But the transition in the downstream or latter region, where most of the turbulent spots propagate onedimensionally (like the turbulent plugs in a pipe), is not affected. When the radius Reynolds number is more than 11,000, the intermittency law in the initial region is essentially the same as in twodimensional flow on a flat plate and in the latter region it is the one-dimensional flow in a pipe, the demarcation between the two regions being quite sharp.

Inculcating character education through EFL teaching in Indonesian state schools

This paper describes how English as foreign language (EFL) teachers in Indonesia have implemented the recent character education policy within an era of school-based curriculum reform. The character education policy required all teachers, EFL teachers included, to instill certain values in every lesson whilst the school-based curriculum reform permitted teachers to develop locally responsive curriculum content. The design behind the reform seeks to sharpen education’s role as a site of moral inculcation in the face of growing social diversity that threatens social cohesion and the prolonged social problem of massive corruption. Drawing on Durkheim’s (1925) distinction between secular and religious morality, this paper considers how the Indonesian curriculum promoted rational or secular moral education and how the EFL teachers enacted religious moral education given religiosity is salient in both the community and schools of Indonesia. Bernstein’s concepts of pedagogic discourse, instructional and regulative discourses were adopted to analyse how EFL teachers have re-contextualized both curricular reforms in their micro pedagogic settings. The conclusion suggests that teachers’ implementation of moral education in their classes was dominated by their school communities’ and the teachers’ own preferred value of religiosity. Such values played out in their classes through both the regulative discourse and the instructional discourse.

The gradual release of responsibility: A case study of teaching science inquiry skills

This thesis investigated how a year-4 teacher used a pedagogical approach referred to as the Gradual Release of Responsibility (GRR) model of instruction for teaching Science Inquiry Skills in a primary classroom. Through scaffolding her students' learning using the GRR, the teacher guided her students towards developing an understanding about Scientific Inquiry leading to the foundations of scientific literacy. A learning environment was established in which students engaged in rich conversations, designed and conducted experiments using fair testing procedures, analysed and offered justifications for results, and negotiated knowledge claims in ways similar to some of those in the scientific community.

Development of a transient gradient enhanced non local continuum damage mechanics model for masonry

Due to the advent of varied types of masonry systems a comprehensive failure mechanism of masonry essential for the understanding of its behaviour is impossible to be determined from experimental testing. As masonry is predominantly used in wall structures a biaxial stress state dominates its failure mechanism. Biaxial testing will therefore be necessary for each type of masonry, which is expensive and time consuming. A computational method would be advantageous; however masonry is complex to model which requires advanced computational modelling methods. This thesis has formulated a damage mechanics inspired modelling method and has shown that the method effectively determines the failure mechanisms and deformation characteristics of masonry under biaxial states of loading.

Editorial - TL Forum 2015: Teaching and learning uncapped

The authors discuss the teaching and learning forum and the number of submissions to its staff from 2006-2015.

R U there yet? using virtual classrooms to transform teaching practice

Access to quality higher education is challenging for many Western Australians that live outside the metropolitan area. In 2010, the School of Education moved to flexible delivery of a fully online Bachelor of Education degree for their non -metropolitan students. The new model of delivery allows access for students from any location provided they have a computer and an internet connection. A number of academic staff had previously used an asynchronous environment to deliver learning modules housed within a learning management system (LMS) but had not used synchronous software with their students. To enhance the learning environment and to provide high quality learning experiences to students learning at a distance, the adoption of synchronous software (Elluminate Live) was introduced. This software is a real-time virtual classroom environment that allows for communication through Voice over Internet Protocol (VoIP) and videoconferencing, along with a large number of collaboration tools to engage learners. This research paper reports on the integration of a live e-learning solution into the current LMS environment. Qualitative data were collected from academic staff through informal interviews and participant observation. The findings discuss (i) perceived level of support; (ii) identification of strategies used to create an effective online teacher presence; (iii) the perceived impact on the students' learning outcomes; and (iv) guidelines for professional development to enhance pedagogy within the live e-learning environment.

Transforming teaching practice through virtual classrooms: A study of staff and student views of synchronous learning

Australia is a vast land and access to quality higher education is challenging for many Australians that live outside the larger metropolitan areas. In 2010, the School of Education at an Australian university (Curtin University in Western Australia) moved to flexible delivery of a fully online Bachelor of Education degree for their rural students. The new model of delivery allows access for students from any location provided they have a computer and an internet connection.A number of teaching staff had previously used an asynchronous environment to deliver learning modules housed within a learning management system (LMS) but had not used synchronous software with their students. To enhance the learning environment and to provide high quality learning experiences to students learning at a distance, the adoption of synchronous software (Elluminate Live) was introduced. This software is a real-time virtual classroom environment that allows for communication through Voice over Internet Protocol (VoIP) and video conferencing, alongside a large number of collaboration tools to engage learners.This research paper reports on the integration of a live e-learning solution into the current Learning Management System (LMS) environment. Staff were interviewed about their perceptions and a questionnaire was administered to a sample of students to identify their experience with the synchronous software in order to inform future practice.

Semi-Classical Mechanics in Phase Space: A Study of Wigner's Function

We explore the semi-classical structure of the Wigner functions ($\Psi $(q, p)) representing bound energy eigenstates $|\psi \rangle $ for systems with f degrees of freedom. If the classical motion is integrable, the classical limit of $\Psi $ is a delta function on the f-dimensional torus to which classical trajectories corresponding to ($|\psi \rangle $) are confined in the 2f-dimensional phase space. In the semi-classical limit of ($\Psi $ ($\hslash $) small but not zero) the delta function softens to a peak of order ($\hslash ^{-\frac{2}{3}f}$) and the torus develops fringes of a characteristic 'Airy' form. Away from the torus, $\Psi $ can have semi-classical singularities that are not delta functions; these are discussed (in full detail when f = 1) using Thom's theory of catastrophes. Brief consideration is given to problems raised when ($\Psi $) is calculated in a representation based on operators derived from angle coordinates and their conjugate momenta. When the classical motion is non-integrable, the phase space is not filled with tori and existing semi-classical methods fail. We conjecture that (a) For a given value of non-integrability parameter ($\epsilon $), the system passes through three semi-classical regimes as ($\hslash $) diminishes. (b) For states ($|\psi \rangle $) associated with regions in phase space filled with irregular trajectories, ($\Psi $) will be a random function confined near that region of the 'energy shell' explored by these trajectories (this region has more than f dimensions). (c) For ($\epsilon \neq $0, $\hslash $) blurs the infinitely fine classical path structure, in contrast to the integrable case ($\epsilon $ = 0, where $\hslash $ )imposes oscillatory quantum detail on a smooth classical path structure.

Interview with Barbara Comber in "Chapter 3 : Critical Literacy" of "Making Literacy Real : Theories and Practices for Learning and Teaching [2nd. Ed.]"

One of the so-called ‘wicked problems’ confronting most nations is poverty, or the unequal distribution of resources. This problem is perennial, but how, where and with which physical, psychological, social and educational effects, and for which students (and their teachers), needs continual scrutiny. Poverty is relative. Entire populations may be poor or groups of people and individuals within nations may be poor. Poverty results from injustice. Not only the un- and under-employed are living in poverty, but also the ‘working poor’. Now we see affluent societies with growing pockets of persistent poverty. While there are those who dispute the statistics on the rise of poverty because different nations use different measures (for example see Biddle, 2013; http://theconversation.com/factcheck-is-poverty-on-the-rise-in-australia-17512), there seems to be little dispute that the gaps between the richest and the poorest are increasing (see http://www.stanford.edu/group/scspi/sotu/SOTU_2014_CPI.pdf)...

Design based research methodology for teaching with technology in English

Design based research (DBR) is an appropriate method for small scale educational research projects involving collaboration between teachers, students and researchers. It is particularly useful in collaborative projects where an intervention is implemented and evaluated in a grounded context. The intervention can be technological, or a new program required by policy changes. It can be applied to educational contexts, such as when English teachers undertake higher degree research projects in their own or others’ sites; or for academics working collaboratively as researchers with teams of teachers. In the case described here the paper shows that DBR is designed to make a difference in the real world contexts in which occurs.

Diversity in the Early Years: Intercultural Learning and Teaching

"New global contexts are presenting new challenges and new possibilities for young children and those around them. Climate change, armed conflict and poverty combine with new frontiers of discovery in science and technology to create a paradoxical picture of both threat and opportunity for our world and our children. On the one hand, children are experiencing unprecedented patterns of disparity and inequity; yet, on the other hand, they have seemingly limitless possibilities to engage with new technologies and social processes. Seismic shifts such as these are inviting new questions about the conditions that young children need to learn and thrive. Diversity in the Early Years: Intercultural Learning and Teaching explores significant aspects of working with children and adults from diverse backgrounds. It is a valuable resource for teaching early childhood pre-service teachers to raise awareness about issues of diversity - whether diversity of culture, language, education and/or gender - and for helping them to develop their own pedagogical approaches to working with diverse populations."--Publisher website

The performance in context model: A 21st century tertiary dance teaching pedagogy

Despite tertiary institutions acknowledging that reflective practice is an essential component of undergraduate dance teacher training, there is often a disparity between the tertiary students’ reflective skills and the more sophisticated reflective ability needed to navigate the 21st century workforce (Silva 2008). This paper charts the evolution of a dance teaching reflective pedagogy within a suite of three units across a three-year undergraduate dance teacher-training course for school, community and studio dance teachers. This reflective pedagogy based on exploration, collaboration, critical questioning and connections with community forms the basis of a model of tertiary dance teacher- training; the Performance in Context Model (PCM). Over the past four years, through four cycles of action research, the PCM pedagogy, context and engagement with community has developed into a successful model integrating practical dance teaching skills, artistry and community engagement. The PCM represents a holistic collaborative approach to dance teacher education: the marrying of ‘teacher-as-artist’, ‘teacher-as-performer’ and ‘teacher-as-researcher’. More specifically, it emphasises the need for mature, reflective, receptive and flexible approaches in response to dance teaching and learning. These are enacted in a variety of contexts, with tertiary dance teaching students identifying as teaching artists, as well as researchers of their own practice.