Structural role of fluoride in the ion-conducting glass system B(2)O(3)-PbO-LiF studied by single- and double-resonance NMR

The local structure of an ion-conducting glass with nominal composition 50B(2)O(3)-10PbO-40LiF has been investigated by complementary (7)Li, (11)B, (19)F, and (207)Pb single- and double-resonance experiments. The results give insight into the structural role of the lithium fluoride additive in borate glasses: (1) LiF is seen to actively participate in the network transformation process contributing to the conversion of three- into four-coordinate boron units, as shown by (11)B single-resonance as well as by (11)B{(19)F} and (19)F{(11)B} double-resonance experiments. (2) (19)F signal quantification experiments suggest substantial fluoride loss, presumably caused by formation of volatile BF(3). A part of the fluoride remains in the dopant role, possibly in the form of small LiF-like cluster domains, which serve as a mobile ion supply. (3) The extent of lithium-fluorine and lead-fluorine interactions has been characterized by (7)Li{(19)F} and (207)Pb{(19)F} REDOR and SEDOR experiments. On the basis of these results, a quantitative structural description of this system has been developed.

Room Temperature Ionic Liquid-Lithium Salt Mixtures: Optical Kerr Effect Dynamical Measurements

The addition of lithium salts to ionic liquids causes an increase in viscosity and a decrease in ionic mobility that hinders their possible application as an alternative solvent in lithium ion batteries. Optically heterodyne-detected optical Kerr effect spectroscopy was used to study the change in dynamics, principally orientational relaxation, caused by the addition of lithium bis(trifluoromethylsulfonyl)imide to the ionic liquid 1-buty1-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. Over the time scales studied (1 ps-16 ns) for the pure ionic liquid, two temperature-independent power laws were observed: the intermediate power law (1 ps to similar to 1 ns), followed by the von Schweidler power law. The von Schweidler power law is followed by the final complete exponential relaxation, which is highly sensitive to temperature. The lithium salt concentration, however, was found to affect both power laws, and a discontinuity could be found in the trend observed for the intermediate power law when the concentration (mole fraction) of lithium salt is close to chi(LiTf(2)N) = 0.2. A mode coupling theory (MCT) schematic model was also used to fit the data for both the pure ionic liquid and the different salt concentration mixtures. It was found that dynamics in both types of liquids are described very well by MCT.

V(2)O(5) nanoparticles obtained from a synthetic bariandite-like vanadium oxide: Synthesis, characterization and electrochemical behavior in an ionic liquid

Highly stable and crystalline V(2)O(5) nanoparticles with an average diameter of 15 nm have been easily prepared by thermal treatment of a bariandite-like vanadium oxide, V(10)O(24)center dot 9H(2)O. Their characterization was carried out by powder X-ray diffractometry (XRD). Fourier transform infrared (FT-IR) and Raman spectroscopies, and transmission electron microscopy (TEM). The fibrous and nanostructured film obtained by electrophoretic deposition of the V(2)O(5) nanoparticles showed good electroactivity when submitted to cyclic voltammetry in an ionic liquid-based electrolyte. The use of this film for the preparation of a nanostructured electrode led to an improvement of about 50% in discharge capacity values when compared with similar electrodes obtained by casting of a V(2)O(5) xerogel. (C) 2009 Elsevier Inc. All rights reserved.

Lithium Ion Electro-Insertion and Spectroelectrochemical Properties of Films from Hexaniobate

Layer-by-layer (LbL) films from K(2)Nb(6)O(17)(2-) and polyallylamine (PAH) and dip-coating films of H(2)K(2)Nb(6)O(17) were prepared on a fluorine-doped tin-oxide (FTO)-coated glass. The atomic force microscopy (AFM) images were carried out for morphological characterization of both materials. The real surface area and the roughness factor were determined on the basis of pseudocapacitive processes involved in the electroreduction/electrooxidation of gold layers deposited on these films. Next, lithium ion insertion into these materials was examined by means of electrochemical and spectroelectrochemical measurements. More specifically, cyclic voltammetry and current pulses under visible light beams were used to investigate mass transport and chromogenic properties. The lithium ion diffusion coefficient (D(Li)) within the LbL matrix is significantly higher than that within the dip-coating film, ensuring high storage capacity of lithium ions in the self-assembled electrode. Contrary to the LbL film, the potentiodynamic profile of absorbance change (Delta A) as a function of time is not similar to that obtained in the case of current density for the dip-coating film. Aiming at analyzing the rate of the coloration front associated with lithium ion diffusion, a spectroelectrochemical method based on the galvanostatic intermittent titration technique (GITT) was employed so as to determine the ""optical"" diffusion coefficient (D(op)). In the dip-coating film, the method employed here revealed that the lithium ion rate is higher in diffusion pathways formed from K(2)Nb(6)O(17)(2-) sites that contribute more significantly to Delta A. Meanwhile, the presence of PAH contributed to the increased ionic mobility in diffusion pathways in the LbL film, with low contribution to the electrochromic efficiency. These results aided a better understanding of the potentiodynamic profile of the temporal change of absorbance and current density during the insertion/deinsertion of lithium ions into the electrochromic materials.

Electrostatic layer-by-layer deposition and electrochemical characterization of thin films composed of MnO(2) nanoparticles in a room-temperature ionic liquid

Thin films of MnO(2) nanoparticles were grown using the layer-by-layer method with poly (diallyldimetylammonium) as the intercalated layer. The film growth was followed by UV-vis, electrochemical quartz crystal microbalance (EQCM), and atomic force microscopy. Linear growth due to electrostatic immobilization of layers was observed up to 30 bilayers, but electrical connectivity was maintained only for 12 MnO(2)/PPDA bilayers. The electrochemical characterization of this film in 1-butyl-2,3-dimethyl-imidazolium (BMMI) bis(trifluoromethanesulfonyl)imide (TFSI) (BMMITFSI) with and without addition of a lithium salt indicated a higher electrochemical response of the nanostructured electrode in the lithium-containing electrolyte. On the basis of EQCM experiments, it was possible to confirm that the charge compensation process is achieved mainly by the TFSI anion at short times (<2 s) and by BMMI and lithium cations at longer times. The fact that large ions like TFSI and BMMI participate in the electroneutrality is attributed to the redox reaction that occurs at the superficial sites and to the high concentration of these species compared to that of lithium cations.

A New Insight on the Preparation of Stabilized Alpha-Nickel Hydroxide Nanoparticles

Nickel hydroxide can provide an outstanding cathode material in alkaline secondary batteries, however the progressive decrease of the charge capacity as a function of the number of oxidation/reduction cycles is a challenging problem to be solved. New improvements on the electrochemical properties of electrode materials can be achieved by exploiting the much better performance of alpha-nickel hydroxide. Such materials were obtained in a stable form by sol-gel method and characterized by thermogravimetric analyses, UV-Vis spectroscopy, X-ray diffractometry, scanning and transmission electron microscopy, cyclic voltammetry and electrochemical quartz crystal microbalance techniques. The results revealed not only the formation of the alpha-Ni(OH)(2) phase, but also a much better electrochemical reversibility and stability as compared with similar materials obtained by electrochemical precipitation method.

Gelatin-based protonic electrolyte for electrochromic windows

Proton-conducting gel polymer electrolytes based on gelatin plasticized with glycerol and containing acetic acid were investigated, characterized, and applied to electrochromic window. For glycerol contents varying from 7% to 48%, the conductivity of the uniform and predominantly amorphous gel electrolyte was found to follow a Vogel-Tamman-Fulcher behavior with the temperature. Typically, for the electrolyte chosen to make 7 x 2 cm(2) electrochromic smart window with the configuration: glass/fluor-doped tin oxide (FTO)/WO(3)/gelatin electrolyte/CeO(2)-TiO(2)/FTO/glass and containing 28% of glycerol, the conductivities were found to be of the order of 5 x 10(-5) S/cm at room temperature and 3.6 x 10(-4) S/cm at 80 A degrees C. The device was characterized by spectroelectrochemical techniques and was tested up to 10,000 cycles showing a fast coloring/bleaching behavior, where the coloring process was achieved in 10 s and the bleaching in 2 s. The transmission variation at the wavelength of 550 nm was about 15%. The cyclic voltammograms showed a very good reversibility of the cathodic/anodic processes, and the charge density was about 3.5 mC/cm(2). The memory tests showed that the transmittance in the colored state increased by 8% in 90 min after removing the potential.

Triggering Solar-Powered Vehicle Activated Signs using Self Organising Maps with K-means

Solar-powered vehicle activated signs (VAS) are speed warning signs powered by batteries that are recharged by solar panels. These signs are more desirable than other active warning signs due to the low cost of installation and the minimal maintenance requirements. However, one problem that can affect a solar-powered VAS is the limited power capacity available to keep the sign operational. In order to be able to operate the sign more efficiently, it is proposed that the sign be appropriately triggered by taking into account the prevalent conditions. Triggering the sign depends on many factors such as the prevailing speed limit, road geometry, traffic behaviour, the weather and the number of hours of daylight. The main goal of this paper is therefore to develop an intelligent algorithm that would help optimize the trigger point to achieve the best compromise between speed reduction and power consumption. Data have been systematically collected whereby vehicle speed data were gathered whilst varying the value of the trigger speed threshold. A two stage algorithm is then utilized to extract the trigger speed value. Initially the algorithm employs a Self-Organising Map (SOM), to effectively visualize and explore the properties of the data that is then clustered in the second stage using K-means clustering method. Preliminary results achieved in the study indicate that using a SOM in conjunction with K-means method is found to perform well as opposed to direct clustering of the data by K-means alone. Using a SOM in the current case helped the algorithm determine the number of clusters in the data set, which is a frequent problem in data clustering.

Marketing de relacionamento: proposta de um plano de marketing de relacionamento para a Genyus Baterias

O objetivo deste estudo é propor um plano de marketing de relacionamento para ser utilizado pela Genyus Baterias na construção de relacionamentos duradouros com os participantes da cadeia de relacionamentos. Para isto são revistos conceitos na área de marketing de relacionamento. Partindo do plano de marketing sugerido por Gordon (1999), foram verificadas quais estratégias deste plano foram ou estão sendo utilizadas pela Genyus Baterias. O plano de marketing utilizado possui oito fases: plano para um plano (fase O), avaliação do cliente (fase 1), referencial (fase 2), avaliação da empresa (fase 3), declaração de oportunidade (fase 4), estado futuro (fase 5), caso empresarial (fase 6) e administração de mudança e implementação (fase 7); dentro dessas fases são analisadas diversas estratégias de marketing de relacionamento para garantir a sua eficácia e para que a organização atinja seus objetivos na formação de relacionamentos e no alcance de uma posição diferenciada no mercado de baterias. Verificou-se que a organização estudada não possui um plano de marketing de relacionamento e, através desta pesquisa a organização poderá utilizar o plano criado para obter eficácia na utilização do marketing de relacionamento.

Avaliação espectrofotométrica do manchamento de resinas odontológicas contendo nanopartículas

Composite resins have been subjected to structural modifications aiming at improved optical and mechanical properties. The present study consisted in an in vitro evaluation of the staining behavior of two nanohybrid resins (NH1 and NH2), a nanoparticulated resin (NP) and a microhybrid resin (MH). Samples of these materials were prepared and immersed in commonly ingested drinks, i.e., coffee, red wine and acai berry for periods of time varying from 1 to 60 days. Cylindrical samples of each resin were shaped using a metallic die and polymerized during 30 s both on the bottom and top of its disk. All samples were polished and immersed in the staining solutions. After 24 hours, three samples of each resin immersed in each solution were removed and placed in a spectrofotome ter for analysis. To that end, the samples were previously diluted in HCl at 50%. Tukey tests were carried out in the statistical analysis of the results. The results revealed that there was a clear difference in the staining behavior of each material. The nanoparticulated resin did not show better color stability compared to the microhybrid resin. Moreover, all resins stained with time. The degree of staining decreased in the sequence nanoparticulated, microhybrid, nanohybrid MH2 and MH1. Wine was the most aggressive drink followed by coffee and acai berry. SEM and image analysis revealed significant porosity on the surface of MH resin and relatively large pores on a NP sample. The NH2 resin was characterized by homogeneous dispersion of particles and limited porosity. Finally, the NH1 resin depicted the lowest porosity level. The results revealed that staining is likely related to the concentration of inorganic pa rticles and surface porosity

Ensino de matemática, história da matemática e artefatos: Possibilidade de interligar saberes em cursos de formação de professores da Educação Infantil e anos iniciais do Ensino Fundamental.

This work is located at the shield of research that defends the use of Mathematics History, based on the utilization of historical artifacts at teaching activities, at Mathematics classrooms, and at graduation courses for teachers of Elementary School and of the first grades of High School. The general objective is to examine the possibility of the use of historical artifacts, at teaching activities, at graduation courses for teachers of Elementary School and of the first grades of High School. Artifact, at this work, is comprehended as objects, documents, monuments, images and other kinds of materials that make sense to the Human actions at the past and that represent what have been said and done at the Human history. At the construction of the theoretical-methodological way of the research we have based ourselves upon the ideas of the authors that are engaged at the teachers formation; at researchers adherents to the use of Mathematics History (MH) as a methodological resource, and at studies accomplished that elucidate the role of the artifacts at the history and as a mediatory element of learning. We defend the thesis that the utilization of historical artifacts at teaching activities enables the increasing of the knowledge, the development of competencies and essential abilities to the teacher acting, as well as interact at different areas of the knowledge, that provides a conception of formation where the teacher improves his learning, learning-doing and learning-being. We have adopted a qualitative research approach with a theoretical and pratic study disposition about the elements that contribute to the teachers works at the classroom, emphasizing the role of the Mathematics history at the teacher s formation and as a pedagogical resource at the mathematics classroom; the knowledge, the competencies and abilities of the historical artifacts as an integrative link between the different areas of the knowledge. As result, we emphasize that the proposition of using the MH, through learning activities, at the course of teacher graduation is relevant, because it allows the investigation of ideas that originate the knowledge generated at every social context, considering the contribution of the social and cultural, political and economical aspects at this construction, making easy the dialog among the areas and inside of each one The historical artifact represents a research source that can be deciphered, comprehended, questioned, extracting from it information about knowledge of the past, trace and vestiges of the culture when it was created, consisting of a testimony of a period. These aspects grant to it consideration to be explored as a mediatory element of the learning. The artifacts incorporated at teaching activities of the graduation courses for teachers promote changes on the view about the Mathematics teaching, in view of to privilege the active participation of the student at the construction of his knowledge, at the reflection about the action that has been accomplished, promoting stimulus so the teachers can create their own artifacts, and offer, either, traces linking the Mathematics with others knowledge areas.

Entre flores e espinhos: a atuação do técnico em enfermagem na estratégia saúde da família

It is about a study of an exploratory/descriptive type with a qualitative approach whose aim was to analyze the actuation of nursing technicians in Family Health Strategy (FHS), taking into consideration the defined attributions by the Ministry of Health (MH). Thus, it was sought to identify what activities they carry out, the difficulties encountered, what contributed to their professional performance, and what vision they have about FHS and about themselves in the context. Based on the assumption that the practice of Nursing Technician is not still geared to completeness and that the developed actions by this professional are predominantly individual and curative. We know that FHS proposes the work organization as a team, with territory definition, prioritization of promotion actions, protection and recovery of the individual/family/community health, choosing as a central point the establishment of entails between the professionals and the same ones. However, the team work pass through interdisciplinary, tying and competence, starting making the difference in the way of thinking and doing health. To the accomplishment of this study were interviewed twenty one Nursing Technicians of Family Health Units from Sanitário Oeste district in Natal-RN, using semistructured instrument. From the analysis, three empiric categories emerged: starting from the first, The reality of a dream: what FHS is for the Nursing Technician, we obtained two classifications: one inherent to the own conception they have about FHS, nominated The realization of a dream in the possible and another that corresponds to what they think about FHS, while project that doesn't take place fully, denominated of The beauty of a dream that doesn't take place. The second category was The FHS: a dream built in the daily of Nursing Technician treats of the day by day information of that professional; the activities they perform and how those are established. This created three other items, to know: The role of a Nursing Technician: a project that became routine; The pre-determined role of a Nursing Technician: the scale as factor of (non-)autonomy; and, Knowledge about the practice in FHS: challenges that are presented to the role of Nursing Technician. The third category, denominated of Charms and disenchantment in the beginning of a new practice, it is related to the facilities or difficulties in professional's actuation and how he sees himself in the context. From it emerged the "flowers" and the "thorns" found on the construction of a dream, which gave this study the title. The results indicate that, being considered the characteristics of researched professional category, it becomes fundamental the resizing of labor relations in FHS, being imperative that new glances is conducted, so that the way as those Nursing Technicians interacts with the families can become compatible, together with the team, as well as to return the attention for their possibilities and limits in face of the work process in FHS. Besides, it is necessary changes in the professional formation, so that it can guarantee the conceptual bases in the construction of new practices, seeking to answer to the model of current attention.

Análise de qualidade da atenção à criança na estratégia saúde da família: o óbito infantil evitável como referência

Alma-Ata declaration bring the Primary Attention to the Health (PAH) as first level of health attention for individuals, family and community, which considers infant group as priority. Several initiatives that gave bases to integral attention to the children health formalized in the principles of Unique Health System. Family Health Strategy (FHS) comes to strengthen this attention, instituting new ways of work organization and professional practices that gave impact in their quality indicators. One of them is children mortality, showing decline in their values. Though, studies indicates persistence of avoidable infant deaths. In Natal RN, this reality is also perceptible leading to inquietudes, mainly at the space of services production, it means, which motivated the accomplishment of the present study intending to analyse the way that the organizational and structural processes as long as the professional practices in FHS interfered in the quality of children s health attention who died by avoidable death in the year of 2007 in municipal district of Natal-RN. It treats, therefore, to an exploratory and descriptive survey of cases study type, thar had as primary sources the oficial documents of MH, the family prontuary, pregnant card, child card and testimony obt ined from instrument of research elaborated based in investigation form of infant death by MH, applied to 10 mothers of children who had avoidable death. In analysis it was appealed silmultaneous triangulation of methods and sources, allowing a bigger aproximation from obtained informations. To elucidate the cases, the aspects studied were analyzed to the light of explicative model of Social Determinants of Health. Among individual and family aspects were highlighted the related to age, schooling, family habits and customs and mother s economic condition, besides of pregnancy age, newborn weight and associated diseases, which don t differ from literature about the theme. Reffering to the factors organizational and structural processes and professionals practice, highlihgted, the treatment given by the professionals, the territorialization and adscription of areas, the difficulty of having access to the services or sleepers and the reference and counterreference. But also, the ausence or few greet, the lack of communication, few assiduity and ponctuality by professionals in service, among others. In a general way mothers considers the attendance received in the hospital good and very good , opnions that in the Basic Attention weren t so favorable, in spite of many of predictible actions in this level have been performed in the studied cases. It is observed, therefore, that the social determinants of health has a strong influence in ocurrence of infant deaths, what implicates in a large actuation by Infant Mortality Committee from municipal district. This way, it becomes fundamental the reflection and evaluation about the effectiveness and execution by the processes of vigilance to health in FHUs; the rethink about the social determinants of health in a wide and articulate way to the services quality, to permanent education, to management in service, to the given attention and to the way how it is installed the popular participation and social control. To the professionals it is presented the great challenge to review their daily practice, their values, behaviors and commitment, which ones must be guided by logical of sharing, work in team, humanescence and alterity, not only by the accomplishment of a professional duty

Dispositivos flexíveis de monitoramento de pH e de deflexão mecânica à base de polianilina

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural and electrochemical properties of LiCoO2 prepared by combustion synthesis

LiCoO2 powders were prepared by combustion synthesis, using metallic nitrates as the oxidant and metal sources and urea as fuel. A small amount of the LiCoO2 phase was obtained directly from the combustion reaction, however, a heat treatment was necessary for the phase crystallization. The heat treatment was performed at the temperature range from 400 up to 700 degreesC for 12 h. The powders were characterized by X-ray diffraction (XRD), X ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and specific surface area values were obtained by BET isotherms. Composite electrodes were prepared using a mixture of LiCoO2, carbon black and poly(vinylidene fluoride) (PVDF) in the 85:10:5% w/w ratio. The electrochemical behavior of these composites was evaluated in ethylene carbonate/dimethylcarbonate solution, using lithium perchlorate as supporting electrolyte. Cyclic voltammograms showed one reversible redox process at 4.0/3.85 V and one irreversible redox process at 3.3 V for the LiCoO2 obtained after a post-heat treatment at 400 and 500 degreesC.Raman spectroscopy showed the possible presence of LiCoO2 with cubic structure for the material obtained at 400 and 500 degreesC. This result is in agreement with X-ray data with structural refinement for the LiCoO2 powders obtained at different temperatures using the Rietveld method. Data from this method showed the coexistence of cubic LiCoO2 (spinel) and rhombohedral (layered) structures when LiCoO2 was obtained at lower temperatures (400 and 500 degreesC). The single rhombohedral structure for LiCoO2 was obtained after post-heat treatment at 600 degreesC. The maximum energy capacity in the first discharge was 136 mA g(-1) for the composite electrode based on LiCoO2 obtained after heat treatment at 700 degreesC. (C) 2002 Elsevier B.V. B.V. All rights reserved.