Ingegnerizzazione di materiali nanostrutturati fotocataliticamente attivi

Il lavoro oggetto di questa tesi è rivolto alla sintesi e alla caratterizzazione di materiali nanostrutturati costituiti da biossido di titanio e ossido di silicio da utilizzare come fotocatalizzatori per la depurazione delle acque. L’obiettivo è stato quello di realizzare un sistema in fase solida costituito da una matrice inerte, la silice, e una fase fotocataliticamente attiva, la nano-TiO2. Tale sistema si inserisce perfettamente nel settore di ricerca che studia la sintesi colloidale di eterostrutture nano e micro cristalline che combinano materiali diversi in un’unica particella. Il progetto nasce all’interno dell’ISTEC-CNR di Faenza, dove è stato svolto il lavoro.

Electrolytic cells for plastic waste recycling

The current project assesses potential molten alloy anodes for Solid Oxide Fuel Cells (SOFC) running on solid waste. A detailed phase diagram study was performed to locate probable anode systems. The molten metal oxide system PbO-Sb2O3 was selected as a possible molten alloy anode for this application. A detailed vapour pressure study of this system was performed. Several cells were fabricated to experimentally assess the electrochemical properties of this system. The work reveals several unexpected limiting features such as the incompatibility between the platinum and the chosen alloy. A second cell was built, this time using rhenium wires instead, preventing such reaction. However, the rhenium wire sublimes under oxidizing conditions (air) and the sealing glass and the chosen alloy system react with each other under long term use. Considering all these issues, a third cell design was conceived, surpassing some obstacles and providing some initial information regarding the electrochemical behaviour. The current project shows that many parameters need to be taken into account to ensure materials compatibility. For the PbOSb2O3 system, the high volatility of Sb2O3 was a serious limitation that can only be addressed through the application of new contact wires or sealing materials and conditions. Nonetheless, the project highlights several other potential systems that can be considered, such as Pb11Ge3O17, Pb3GeO5, Pb5Ge3O11, Bi2CuO4, Bi2PdO4, Bi12GeO20.

Efeito da radiação micro-ondas na sinterização em fases sólida e líquida de pós de aço inoxidável 3I6L

Tese submetida à Universidade de Coimbra, Faculdade de Ciências e Tecnologia e aprovada em provas públicas para a obtenção do Grau de Doutor em Engenharia Mecânica (especialidade de Ciência dos Materiais)

Terminal defect analysis and classification methodology for automotive industry

The impact of end customer quality complaints with direct relationship with automotive components has presented negative trend at European level for the entire automotive industry. Thus, this research proposal is to concentrate efforts on the most important items of Pareto chart and understand the failure type and the mechanism involved, link and impact of the project and parameters on the process, ending it with the development of one of the company’s most desired tool, that hosted this project – European methodology of terminals defects classification, and listing real opportunities for improvement based on measurement and analysis of actual data. Through the development of terminals defects classification methodology, which is considered a valuable asset to the company, all the other companies of the YAZAKI’s group will be able to characterize terminals as brittle or ductile, in order to put in motion, more efficiently, all the other different existing internal procedures for the safeguarding of the components, improving manufacturing efficiency. Based on a brief observation, nothing can be said in absolute sense, concerning the failure causes. Base materials, project, handling during manufacture and storage, as well as the cold work performed by plastic deformation, all play an important role. However, it was expected that this failure has been due to a combination of factors, in detriment of the existence of a single cause. In order to acquire greater knowledge about this problem, unexplored by the company up to the date of commencement of this study, was conducted a thorough review of existing literature on the subject, real production sites were visited and, of course, the actual parts were tested in lab environment. To answer to many of the major issues raised throughout the investigation, were used extensively some theoretical concepts focused on the literature review, with a view to realizing the relationship existing between the different parameters concerned. Should here be stated that finding technical studies on copper and its alloys is really hard, not being given all the desirable information. This investigation has been performed as a YAZAKI Europe Limited Company project and as a Master Thesis for Instituto Superior de Engenharia do Porto, conducted during 9 months between 2012/2013.

Caracter?sticas antropom?tricas, funcionales y motoras, de jugadores de baloncesto de 14 a 16 a?os pertenecientes al Club Astros de Cali

Se realiz? un estudio de tipo descriptivo de corte transversal a 16 jugadores de baloncesto con edad media de 15,3?0,9 a?os, pertenecientes al Club Astros de Cali, con el objetivo de establecer las caracter?sticas antropom?tricas, funcionales y motoras y poder conocer el perfil de la poblaci?n estudiada para analizar y comparar con otros estudios realizados. Se realizaron evaluaciones antropom?tricas para establecer las dimensiones corporales totales (talla y peso), composici?n corporal (% graso Yuhaz) y el somatotipo (Heath Carter). El nivel de desarrollo de las cualidades f?sicas se evalu? por medio del test del salto vertical (Abalakov), lanzamiento de bal?n medicinal, velocidad 20 m y Wells. El componente funcional se determin? con la medici?n indirecta del consumo m?ximo de ox?geno a trav?s del test de legger. Seg?n el an?lisis estad?stico de los resultados para las variables antropom?tricas se encontr? que la talla se incrementa de acuerdo al desarrollo normal de los individuos, la media del grupo fue de 173,0?8,1 cm, el peso se encontr? dentro de los par?metros normales para la edad con una media de 63,3?10,9 Kg, al comparar estos resultados con otros estudios tanto en la talla como en el peso se observ? en algunas ligas diferencias significativas especialmente en los j?venes de 16 a?os. En la composici?n corporal, la media del % graso para el grupo fue de 10,1?2,0 % valor que se considera ideal para la pr?ctica del baloncesto, al comparar los valores encontrados en cada una de las edades con otros estudios se observ? mejores resultados para los jugadores del Club Astros, en cuanto al somatotipo el grupo se caracteriz? por un predominio del componente ectomorfico clasific?ndose como ectomorfo balanceado. En los test funcionales y motores se encontr? para el VO2 M?x una media grupal de 47,8?5,0 ml/kg/min, para la prueba de velocidad 20 m una media de 4,2?0,51 seg, en ambos test los mejores resultados fueron para los jugadores de 14 a?os, por el lado de la flexibilidad la media obtenida en el test de Wells fue de 3,9?8,5 cm con mejor promedio para los jugadores de 16 a?os, al comparar los valores encontrados en las pruebas anteriores con otros estudios se apreci? un d?ficit considerable en todas las edades. En el test de lanzamiento del bal?n medicinal la media encontrada fue de 6,9?0,9 m con mejores resultados para los j?venes de 15 a?os y promedios similares al ser comparados con otros estudios, por ?ltimo para el salto Abalakov se encontr? una media de 41,3?5,3 cm con mejor rendimiento en los jugadores de 16 a?os valores que seg?n la clasificaci?n utilizada como referencia se encuentra dentro de los est?ndares requeridos.

Aplicación de fotocatálisis heterogénea para la eliminación de Escherichia coli en agua de pozo para consumo humano, en la Comunidad Patricia Puertas del área natural protegida Colima, Municipio de Suchitoto, departamento de Cuscatlán

Se desarrolló un método de desinfección de agua de pozo por medio de fotocatálisis heterogénea utilizando dióxido de titanio (TiO2) como catalizador. Este proceso se llevó a cabo utilizando agua de pozo de la comunidad Patricia Puertas del Área Natural Protegida Colima, que pertenece al municipio de Suchitoto del departamento de Cuscatlán. Para desarrollar el método de desinfección se tomaron una serie de parámetros físico-químicos y microbiológicos para determinar el nivel de contaminación; luego se aplicó el método de desinfección por medio fotocatálisis heterogénea al agua de pozo, colocando diferentes concentraciones de TiO2 en suspensión a botellas PET de 3 litros de capacidad en un concentrador solar de paredes planas colocado al sol durante diferentes tiempos para determinar el tiempo y concentración óptimo que permitiría la mayor eliminación de Escherichia coli; al determinar el tiempo y concentración óptimos, se realizó el proceso de eliminación de Escherichia coli por fotocatálisis heterogénea para determinar la capacidad de eliminación del método utilizado. El TiO2 y la luz penetran a través de la célula y es absorbida por el ácido nucléico; la absorción de la luz ultravioleta por el ácido nucléico provoca una reordenación de la información genética, lo que interfiere con la capacidad reproductora de la célula, por consiguiente la Escherichia coli es eliminada por el TiO2 y la luz UV como resultado del daño fotoquímico

Análise e avaliação dos elementos de penetração no solo de equipamentos rodoviários após revestimento

The main objective is to analyze the abrasive wear resistance to the low stress of the elements that make up the organs of road machinery that are exposed directly to contact with abrasives. These samples were analyzed after these elements are coated superficially by the process of welding electrode coated with (SAER) and the manual process of coating type LVOF thermal spraying. As well, is to provide suggestions for a better recovery and return of these elements, which are reducing costs and avoiding downtime in the fronts of service. The samples were made from a substrate of carbon ABNT 1045 tempered steel, following the same specifications and composition of metals and alloys of constituents was followed the standard governing the dimensions of these samples and in accordance with the corresponding size. The results were evaluated by testing the hardness, abrasion resistance to wear by the low stress and the loss of volume involving the microstructure of coatings analyzed

Influência do número de refundições da liga Ni-Cr-Mo-Ti sobre as propriedades de próteses metalocerâmicas

A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

El geoespacio como recurso didáctico en la enseñanza de la geometría

Se proponen actividades utilizando el geoespacio, el cual es un material que el alumno manipulará para aprender en forma práctica, y así se consolidará el aprendizaje de las matemáticas, en especial de la geometría. Por medio de dibujos en isométrico se hará la representación plana de los sólidos que se formen en el geoespacio. Pescarini y Puig Adam han presentado una modificación del geoplano para hacer posible el estudio del espacio de tres dimensiones; lo han llamado geoespacio y sus posibilidades son sensiblemente menores. Consta de tres paredes de tela metálica fina formando un triedro. Con trozos de alambre se materializan las figuras del espacio, particularmente las poliédricas. En este trabajo se presenta al geoespacio como una estructura cúbica que lleva un sistema de argollas dispuestas en las aristas, donde podrán colocarse ligas de colores para formar sólidos y presentar diversas situaciones didácticas.

Tratamento térmico do titânio e suas consequências sobre as propriedades físico-químicas e de biocompatibilidade

The titanium and titanium alloys are widely used as biomaterial in biomedical device and so research have been developed aiming to improve and/or better to understand interaction biomaterial/biological environment. The process for manufacturing of this titanium implants usually involves a series of thermal and mechanical processes which have consequence on the final product. The heat treatments are usually used to obtain different properties for each application. In order to understand the influence of these treatments on the biological response of the surface, it was done, in this work, different heat treatments in titanium and analyzed their influence on the morphology, adhesion and proliferation of the pre-osteoblastic cells (MC3T3-E1). For such heat-treated titanium disks were characterized by optical microscopy, contact angle, surface energy, roughness, microhardness, X-ray diffraction and scanning through the techniques (BSE, EDS and EBSD). For the analysis of biological response were tested by MTT proliferation, adhesion by crystal violet and β1 integrin expression by flow cytometry. It was found that the presence of a microstructure very orderly, defined by a chemical attack, cells tend to stretch in the same direction of orientation of the material microstructure. When this order does not happen, the most important factor influencing cell proliferation is the residual stress, indicated by the hardness of the material. This way the disks with the highest level state of residual stress also showed increased cell proliferation

Estudio del efecto del procesamiento termo mecánico sobre los parámetros de formabilidad en aceros IF para aplicaciones automotrices

En el presente trabajo de investigación se analizó un acero libre de elementos intersticiales estabilizado con Titanio o mejor conocido como acero IF (por sus siglas en inglés Interstitial Free), denominado por la empresa EDDS (Extra Deep Drawing Steel) el cual se utiliza en partes exteriores de los vehículos en donde se requiere que la lámina a estampar cumpla con propiedades muy altas de ductilidad y baja resistencia. Se obtuvo acero IF en sus distintas etapas de procesamiento termo mecánico comenzando por material laminado en caliente, material laminado en frio y por ultimo material recocido y galvanizado en planta, esto con el objetivo de caracterizar y evaluar las propiedades mecánicas de cada etapa. De la etapa final del acero (recocido y galvanizado de planta) se obtuvieron los parámetros de formabilidad (n y R) mediante una prueba de tensión para poder establecer las condiciones a superar con las experimentaciones. El objetivo principal en el laboratorio fue el mejorar, mediante diferentes variables de recocido (tiempo y temperatura) en los tratamientos térmicos, los parámetros n= 0.23 y R=1.56 producidos en planta, y lograr obtener mediante nuevos tratamientos térmicos valores de R> 1.56 al igual que valores de n>0.23. Para simular las temperaturas con tiempos cortos de recocido se implementó un calentamiento por inducción en la bobina del laboratorio. Se pudieron realizar solo 2 pruebas debido al material disponible para este experimento. Ambos experimentos resultaron en una notable mejoría del valor de Lankford R (utilizado como un indicador en la formabilidad de hojas de acero), así como del exponente de endurecimiento por deformación (n), y se logró mantener un poco por encima sus propiedades de esfuerzo de cedencia, esfuerzo último y por ciento de elongación a las obtenidas por el proceso de recocido realizado en planta.

Biological and chemical strategies for the recovery of precious and rare metals as nanoparticles

Tese de Doutoramento, Ciências do Mar da Terra e do Ambiente, Ramo: Ciências e Tecnologias do Ambiente, Especialidade em Biotecnologia, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites

Obtenção de pós de tântalo metálico a partir da redução aluminotérmica com ignição a plasma

Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor