Nutritional status of Eucalyptus grandis clones evaluated by critical level and DRIS methods

Nutritional status of eight 1.0 and 4.7 years old clones of Eucalyptus grandis, cultivated in a medium textured Ustults - US - and a Quartzipsamments - PS - soils, in Lençóis Paulista, São Paulo, were evaluated by the Diagnosis and Recommendation Integrated System (DRIS) and Critical Level (CL) methods. Based on multivariate discriminant analysis, the DRIS indices described the nutritional status of trees better in relation to tree age and soil type than in relation to nutrient composition. Spearman's correlation coefficients showed statistically significant relationships between volumetric tree growth and nutrients when applying DRIS indices or foliar nutrient concentrations. However, the DRIS indices indicated a lower number of trees with nutritional deficiencies, in relation to the CL method. According to the CL method, P, S, and Ca were deficient in the majority of the soils and tree age categories. By the DRIS method, Ca was the only deficient nutrient in PS soils, and appeared to be particularly limited in one-year-old trees. In conclusion, the DRIS method was more efficient than the CL method in evaluating the nutritional status of eucalyptus trees.

Atomic level phenomena on transition metal surfaces

In this study we discuss the atomic level phenomena on transition metal surfaces. Transition metals are widely used as catalysts in industry. Therefore, reactions occuring on transition metal surfaces have large industrial intrest. This study addresses problems in very small size and time scales, which is an important part in the overall understanding of these phenomena. The publications of this study can be roughly divided into two categories: The adsorption of an O2 molecule to a surface, and surface structures of preadsorbed atoms. These two categories complement each other, because in the realistic case there are always some preadsorbed atoms at the catalytically active surfaces. However, all transition metals have an active d-band, and this study is also a study of the in uence of the active d-band on other atoms. At the rst part of this study we discuss the adsorption and dissociation of an O2 molecule on a clean stepped palladium surface and a smooth palladium surface precovered with sulphur and oxygen atoms. We show how the reactivity of the surface against the oxygen molecule varies due to the geometry of the surface and preadsorbed atoms. We also show how the molecular orbitals of the oxygen molecule evolve when it approaches the di erent sites on the surface. In the second part we discuss the surface structures of transition metal surfaces. We study the structures that are intresting on account of the Rashba e ect and charge density waves. We also study the adsorption of suphur on a gold surface, and surface structures of it. In this study we use ab-initio based density functional theory methods to simulate the results. We also compare the results of our methods to the results obtained with the Low-Energy-Electron-Difraction method.

Accuracy and efficiency evaluation of point-centered quarter method variations for vegetation sampling in an araucaria forest

In order to verify Point-Centered Quarter Method (PCQM) accuracy and efficiency, using different numbers of individuals by per sampled area, in 28 quarter points in an Araucaria forest, southern Paraná, Brazil. Three variations of the PCQM were used for comparison associated to the number of sampled individual trees: standard PCQM (SD-PCQM), with four sampled individuals by point (one in each quarter), second measured (VAR1-PCQM), with eight sampled individuals by point (two in each quarter), and third measuring (VAR2-PCQM), with 16 sampled individuals by points (four in each quarter). Thirty-one species of trees were recorded by the SD-PCQM method, 48 by VAR1-PCQM and 60 by VAR2-PCQM. The level of exhaustiveness of the vegetation census and diversity index showed an increasing number of individuals considered by quadrant, indicating that VAR2-PCQM was the most accurate and efficient method when compared with VAR1-PCQM and SD-PCQM.

Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.

A quantitative view on fuzzy numbers

Since its introduction, fuzzy set theory has become a useful tool in the mathematical modelling of problems in Operations Research and many other fields. The number of applications is growing continuously. In this thesis we investigate a special type of fuzzy set, namely fuzzy numbers. Fuzzy numbers (which will be considered in the thesis as possibility distributions) have been widely used in quantitative analysis in recent decades. In this work two measures of interactivity are defined for fuzzy numbers, the possibilistic correlation and correlation ratio. We focus on both the theoretical and practical applications of these new indices. The approach is based on the level-sets of the fuzzy numbers and on the concept of the joint distribution of marginal possibility distributions. The measures possess similar properties to the corresponding probabilistic correlation and correlation ratio. The connections to real life decision making problems are emphasized focusing on the financial applications. We extend the definitions of possibilistic mean value, variance, covariance and correlation to quasi fuzzy numbers and prove necessary and sufficient conditions for the finiteness of possibilistic mean value and variance. The connection between the concepts of probabilistic and possibilistic correlation is investigated using an exponential distribution. The use of fuzzy numbers in practical applications is demonstrated by the Fuzzy Pay-Off method. This model for real option valuation is based on findings from earlier real option valuation models. We illustrate the use of number of different types of fuzzy numbers and mean value concepts with the method and provide a real life application.

Efficiency of distinct data mining algorithms for classifying stress level in piglets from their vocalization

Among the challenges of pig farming in today's competitive market, there is factor of the product traceability that ensures, among many points, animal welfare. Vocalization is a valuable tool to identify situations of stress in pigs, and it can be used in welfare records for traceability. The objective of this work was to identify stress in piglets using vocalization, calling this stress on three levels: no stress, moderate stress, and acute stress. An experiment was conducted on a commercial farm in the municipality of Holambra, São Paulo State , where vocalizations of twenty piglets were recorded during the castration procedure, and separated into two groups: without anesthesia and local anesthesia with lidocaine base. For the recording of acoustic signals, a unidirectional microphone was connected to a digital recorder, in which signals were digitized at a frequency of 44,100 Hz. For evaluation of sound signals, Praat® software was used, and different data mining algorithms were applied using Weka® software. The selection of attributes improved model accuracy, and the best attribute selection was used by applying Wrapper method, while the best classification algorithms were the k-NN and Naive Bayes. According to the results, it was possible to classify the level of stress in pigs through their vocalization.

Validation study of an overall radiation balance estimation method under Ponta Grossa (PR) Brazil weather conditions

Radiation balance is the fraction of incident solar radiation upon earth surface which is available to be used in several natural processes, such as biological metabolism, water loss by vegetated surfaces, variation of temperature in farming systems and organic decomposition. The present study aimed to assess and validate the performance of two estimation models for Rn in Ponta Grossa city, Paraná State, Brazil. To this end, during the period of 04/01/2008 to 04/30/2011, from radiometric data collected by an automatic weather station set at the Experimental Station, of the State University of Ponta Grossa. We performed a linear regression study by confrontation between measurements made through radiometric balance and Rn estimates obtained from Brunt classical method, and the proposed method. Both models showed excellent performance and were confirmed by the statistical parameters applied. However, the alternative method has the advantage of requiring only global solar radiation values, temperature, and relative humidity.

Katsastuksen teknisen laadun mittaaminen ja johtaminen

Suorituskyvyn mittaamisella on monia myönteisiä vaikutuksia koko organisaation toimintaan. Mittaamisen avulla toimintaa voidaan johtaa haluttuun suuntaan. Tutkimuksen tavoitteena oli tutkia, minkälainen suorituskykymittaristo tarvitaan katsastusyrityksen ylimmän johdon käyttöön, jotta katsastuksen teknisen laadun johtaminen mahdollistuisi. Tutkimuksen tarkoituksena oli rakentaa katsastuksen teknisen laadun suorituskykymittaristo ylimmälle johdolle. Katsastuksen tekninen laatu on keskeinen kysymys katsastusyritysten olemassaololle. Tekninen laatu on koko katsastustoiminnan perusta, jonka päälle liiketoiminta voidaan rakentaa. Ilman tätä perustaa ei ole jatkuvuutta liiketoiminnalle. Teknisen laadun mittaaminen ei kuitenkaan ole tällä hetkellä järjestelmällistä, eikä käytettävissä ole ollut tehtävään soveltuvaa mittaristoa. Tutkimuksessa käytettiin A-Katsastus Oy:n vuosien 2008–2011 aikana syntyneitä katsastustilastoja. Tilastollista prosessin valvonta-menetelmää (SPC) soveltamalla määritettiin toimipaikka- ja katsastajakohtaiset valvontarajat hylkäysprosenteille ja vikojen määrille. Valvontarajojen avulla rakennettiin katsastuksen teknisen laadun suorituskykymittaristo toimiala-, yritys-, toimipaikka- ja katsastajatasoille. Mittariston avulla voidaan asettaa tekniselle laadulle tavoitteet, seurata tavoitteiden toteumaa ja käynnistää tarvittaessa korjaavat toimenpiteet.

Configuration management process improvement : a case study of a Pan-Nordic insurance company

Configuration management is often seen as an enabler for the main IT Service Management (ITSM) processes such as Incident and Problem management. A decent level of quality of IT configuration data is required in order to carry out routines of these processes. This case study examines the state of configuration management in a multinational organization and aims at identification of methods for its improvement. The author has stayed five months with this company in order to collect different sources of evidence and to make observations. The main source of data for this study is interviews with some of the key employees of the assigned organization who are involved into the ITSM processes. This study concludes the maturity level of the existing configuration management process to be repeatable but intuitive, and outlines the principal requirements for its improvement. A match between the requirements identified in the organization and the requirements stated in the ISO/IEC 20000 standard indicates the possibility of adopting ITIL guidelines as a method for configuration management process improvement. The outcome of the study presents a set of recommendations for improvement that considers the process, the information model and the information system for configuration management in the case organization.

Modeling and Control of the Power Conversion Unit in a Solid Oxide Fuel Cell Environment

In this doctoral thesis, a power conversion unit for a 10 kWsolid oxide fuel cell is modeled, and a suitable control system is designed. The need for research was identified based on an observation that there was no information available about the characteristics of the solid oxide fuel cell from the perspective of power electronics and the control system, and suitable control methods had not previously been studied in the literature. In addition, because of the digital implementation of the control system, the inherent characteristics of the digital system had to be taken into account in the characteristics of the solid oxide fuel cell (SOFC). The characteristics of the solid oxide fuel cell as well the methods for the modeling and control of the DC/DC converter and the grid converter are studied by a literature survey. Based on the survey, the characteristics of the SOFC as an electrical power source are identified, and a solution to the interfacing of the SOFC in distributed generation is proposed. A mathematical model of the power conversion unit is provided, and the control design for the DC/DC converter and the grid converter is made based on the proposed interfacing solution. The limit cycling phenomenon is identified as a source of low-frequency current ripple, which is found to be insignificant when connected to a grid-tied converter. A method to mitigate a second harmonic originating from the grid interface is proposed, and practical considerations of the operation with the solid oxide fuel cell plant are presented. At the theoretical level, the thesis discusses and summarizes the methods to successfully derive a model for a DC/DC converter, a grid converter, and a power conversion unit. The results of this doctoral thesis can also be used in other applications, and the models and methods can be adopted to similar applications such as photovoltaic systems. When comparing the results with the objectives of the doctoral thesis, we may conclude that the objectives set for the work are met. In this doctoral thesis, theoretical and practical guidelines are presented for the successful control design to connect a SOFC-based distributed generation plant to the utility grid.

Comparison of Two- and Three-dimensional Ultrasonography in the Evaluation of Lesion Level in Fetuses with Spina Bifida

Purpose To evaluate the precision of both two- and three-dimensional ultrasonography in determining vertebral lesion level (the first open vertebra) in patients with spina bifida. Methods This was a prospective longitudinal study comprising of fetuses with open spina bifida who were treated in the fetal medicine division of the department of obstetrics of Hospital das Clínicas of the Universidade de São Paulo between 2004 and 2013. Vertebral lesion level was established by using both two- and three-dimensional ultrasonography in 50 fetuses (two examiners in each method). The lesion level in the neonatal period was established by radiological assessment of the spine. All pregnancies were followed in our hospital prenatally, and delivery was scheduled to allow immediate postnatal surgical correction. Results Two-dimensional sonography precisely estimated the spina bifida level in 53% of the cases. The estimate error was within one vertebra in 80% of the cases, in up to two vertebrae in 89%, and in up to three vertebrae in 100%, showing a good interobserver agreement. Three-dimensional ultrasonography precisely estimated the lesion level in 50% of the cases. The estimate error was within one vertebra in 82% of the cases, in up to two vertebrae in 90%, and in up to three vertebrae in 100%, also showing good interobserver agreement. Whenever an estimate error was observed, both two- and three-dimensional ultrasonography scans tended to underestimate the true lesion level (55.3% and 62% of the cases, respectively). Conclusions No relevant difference in diagnostic performance was observed between the two- and three-dimensional ultrasonography. The use of three-dimensional ultrasonography showed no additional benefit in diagnosing the lesion level in the fetuses with spina bifida. Errors in both methods showed a tendency to underestimate lesion level.

Toimintamallin luominen halutun ympäristöluokitustason saavuttamiseksi uudisrakennusprojektissa

Tämän diplomityön tavoitteena on selvittää miksi uudisrakennushankkeeseen ryhtyvän kannattaa huomioida kestävän rakentamisen vaatimukset ja miten asetettuja kestävän ra-kentamisen tavoitteita voidaan hallita rakennusprojektin aikana. Perinteisesti rakennussektorilla on keskitytty tilaajan tavoitteiden saavuttamiseen kustan-nustehokkaasti ja aikataulussa. Kestävän kehityksen ja vastuullisuuden näkökulmat ovat kuitenkin vahvistuneet viime aikoina. Kestävän rakentamisen hallinta vaatii vielä uusia toimintatapoja ja -malleja, jotta voidaan varmistaa kestävän kehityksen kriteerien mukai-suus läpi hankkeen ja valmiissa rakennuksessa. Ympäristöluokitusjärjestelmien avulla voidaan asettaa kestävän rakentamisen tavoitteita, joita seurataan läpi hankkeen. Diplomityössä selvitetään yksityiskohtaisemmin BREEAM (BRE Environmental Assessment Method)-ympäristöluokitusjärjestelmän käyttämistä kestävän rakentamisen ohjaamisessa. Työssä selvitetään myös miten rakennusten tietomallinnusta voidaan käyttää tukemaan kestävän rakentamisen uudisrakennushanketta. Työ toteutetaan kirjalli-suustutkimuksen, asiantuntijahaastatteluiden ja ympäristöluokitusta hakeneesta esimerkki-kohteesta saatujen tietojen avulla. Diplomityön tuloksena muodostettiin toimintamalli varmistamaan halutun kestävän kehi-tyksen tason saavuttaminen uudisrakennusprojektissa. Toimintamallissa on jaettu vastuut ja tehtävät eri osapuolille koko projektin ajalle tarveselvityksestä käytönaikaan.

Painesuodattimen automatisoidun kankaanvaihtolaitteen kehittäminen ja tekninen tuotteistaminen

Tässä työssä tarkastellaan CE-merkintään vaadittavia teknisen tuotteistamisen vaiheita käyttäen esimerkkinä painesuodattimen automatisoidun kankaanvaihtolaitteen suunnitteluprosessia. Työssä selvitetään, mitä vaihtoehtoja on painesuodattimen lisälaitteiden luokitteluksi, että ne saadaan tuotteistettua Euroopan talousalueella (ETA). Esimerkkinä käytettävä kankaanvaihtolaite on suunniteltu käyttäen järjestelmällisen koneensuunnittelun menetelmää. CE-merkinnän vaatima riskianalyysi on tehty laitteelle standardin SFS-EN ISO 12100:2010 mukaisesti. Tuloksena saatu laitteen prototyyppi täyttää pääosin laitteelle asetettavat vaatimukset. Kustannusarvio ylittää kuitenkin toivotun omakustannehinnan valoverhojen suhteellisen kalliin hinnan takia. Kustannusarvion mukaan prototyyppi voidaan kuitenkin valmistaa edullisesti, sillä valoverhot eivät ole pakollisia laitteen toiminnallisissa testeissä. Ennen tuotteistamista valoverhojen korvaamisen mahdollisuutta muulla turvatekniikalla on kuitenkin tutkittava. Suunnitteluvaiheen jälkeen laitteen turvallisuuden voidaan todeta olevan vähintään riittävällä tasolla. Riskianalyysi on kuitenkin päivitettävä dokumentti, ja laitteen turvallisuus täytyy varmistaa prototyyppiä testaamalla. Työn perusteella voidaan todeta, että huomioimalla laitteen mahdollisesti aiheuttamat vaaratilanteet jo tuotesuunnittelun alussa, voidaan tuotekehitysprosessia nopeuttaa. Tunnistamalla vaaratilanteet suunnittelun varhaisessa vaiheessa voidaan vähentää riskien määrää, ja siten tarvetta riskien pienentämiselle. Näin vähennetään rakenteen suunnittelun ja riskianalyysin iterointikierrosten määrää, jolloin myös tuotteistamisprosessi nopeutuu.

Päivystyshoitotyön osaaminen valmistuvien sairaanhoitajaopiskelijoiden arvioimana

Potilaan hoitamisessa korostuvat mm. triagen tekeminen, potilaan voinnin seuranta ja hoitoa koskevien päätösten tekeminen nopeasti potilaan voinnin mukaan sekä potilaan jatkohoidon turvaaminen. Tämä kaksivaiheinen koulutustutkimus kohdistui päivystyshoitotyön osaamiseen. Tutkimuksen ensimmäisessä vaiheessa määriteltiin päivystyshoitotyön osaaminen ja toisessa vaiheessa arvioitiin valmistuvien sairaanhoitajaopiskelijoiden päivystyshoitotyön osaamista ja osaamiseen yhteydessä olevia tekijöitä. Osaamisen arvioinnin suorittivat opiskelijat itse ja vertailuperustana opiskelijoiden päivystyshoitotyön osaamiselle käytettiin ammatissa toimivien sairaanhoitajien päivystyshoitotyön osaamista. Tutkimuksen tavoitteena oli arvioinnin perusteella määrittää päivystyshoitotyön osaamisen nykytaso ja tehdä tarvittavat ehdotukset päivystyshoitotyön osaamisen kehittämiseen. Tutkimuksen ensimmäisessä vaiheessa (2006–2012) tiedonkeruumenetelminä oli kirjallisuuskatsaus ja asiantuntija-arviointi hyödyntäen delphi-menetelmää. Kirjallisuuskatsauksen perusteella muodostettiin päivystyshoitotyön osaamista kuvaavat pääkategoriat, yläkategoriat ja alakategoriat.Alakategoriat (n=61) annettiin asiantuntijoille (sairaanhoitajat, opettajat, ylihoitajat) arvioitavaksi.Kaksivaiheisen asiantuntija-arvioinnin perusteella muodostui 92 päivystyshoitotyön osaamista kuvaavaa alakategoriaa. Tutkimuksen toisessa vaiheessa (2007–2012) valmistuvien suomalaisten sairaanhoitaja-opiskelijoiden (N=382, n=208, vastausprosentti 55 %) päivystyshoitotyön osaamista arvioitiin tätä tutkimusta varten kehitetyllä mittarilla (Päivystyshoitotyön osaaminen -mittari). Mittari perustui tutkimuksen ensimmäisessä vaiheessa muodostettuun määrittelyyn päivystyshoitotyön osaamisesta. Osaamista mitattiin VAS-janalla (asteikko 0–100) arvon 100 ollessa optimaalinen taso, johon pyrittiin. Sairaanhoitajaopiskelijoiden tavoiteltavaksi osaamisen tasoksi asetettiin 80 olettaen opiskelijoiden osaamisen vielä kehittyvän työkokemuksen myötä. Ammatissa toimivien sairaanhoitajien (N=586, n=280, vastausprosentti 48 %) itsearvioitua osaamista käytettiin vertailuperustana opiskelijoiden osaamiselle. Aineisto analysoitiin tilastollisin menetelmin. Valmistuvien sairaanhoitajaopiskelijoiden itsearvioitu päivystyshoitotyön osaaminen oli alle tavoiteltavan osaamisen tason. Opiskelijoilla oli mielestään eniten eettistä osaamista sekä vuorovaikutus- ja yhteistyöosaamista ja vähiten päätöksenteko-osaamista ja kliinistä osaamista. Myös ammatissa toimivilla sairaanhoitajilla oli mielestään eniten vuorovaikutus- ja yhteistyöosaamista. Vähiten heillä oli ohjausosaamista ja päätöksenteko-osaamista. Sairaanhoitajilla oli tilastollisesti merkitsevästi enemmän päivystyshoitotyön osaamista kuin opiskelijoilla. Opiskelijoiden päivystyshoitotyön osaamista selitti eniten aikaisempi terveysalan tutkinto. Päivystyshoitotyön osaamisen kehittämisehdotukset kohdistuvat ammatillisen peruskoulutuksen ja täydennyskoulutuksen opetuksen sisältöihin ja määrään, opetus- ja opiskelumenetelmiin, osaamisen arviointiin sekä urasuunnitteluun. Jatkotutkimusehdotukset kohdistuvat päivystyshoitotyön osaamisen määrittelyn ja osaamista arvioivan mittarin edelleen kehittämiseen, erilaisten arviointimenetelmien kehittämiseen sekä osaamiseen yhteydessä olevien tekijöiden edelleen tutkimiseen.

The Role of a firm’s mindset in international success - case study of Finnish marine industry firms

This thesis investigates the influence of a firm’s mindset on international success in the context of the Finnish marine industry. The study draws theoretical wisdom from organisational behaviour and strategic management literatures. The research aim set for this study was to identify and categorise existing strategic types based on mindsets found in the marine industry SMEs, and to link the influence of mindsets with success by examining the role of mindsets in a firm’s performance. Mindsets of firms were conceptualised as aggregate collections of perceptions that influence how the surrounding environment is discerned by the members of the firm. Mindsets are idiosyncratic to firms and therefore important firm-specific resources which influence decision-making and can be observed through the strategic behaviour of firms. Qualitative case study method was applied which was further supported by quantitative data on the financial performance of the ten case firms. Taxonomy based on the dimension of mindsets and prediction was developed to demonstrate four ideal types of firms identified within the marine industry. It was found that all of the case firms emphasised adaptation in their strategy while planning was emphasised to a varying degree. Moreover, two different methods of adapting were found; proactive and reactive. Firms which plan in the long-term and adapt proactively constantly investigate whether their plans are synchronous with the realities of the market; by having an open mindset, a firm’s perception of the reality of the market is enabling the firm to develop value creating strategies which are superiorly informed.This finding was supported by the financial data and led to the proposition that having an open mindset and placing a high level of emphasis on prediction may have a positive influence on international success. Also, it was proposed that concentrating only on exploiting business opportunities in the present time and not exploring any addition opportunities can have a negative influence on the firm’s performance, even if the mindset of the firm is open.