Anatomical and histological characteristics of teeth in agouti (Dasyprocta prymnolopha Wagler, 1831)

The agouti species Dasyprocta prymnolopha (D. prymnolopha) is a medium-sized rodent, diurnal, and characteristic of northeastern Brazil, south of the Amazon. Several studies have been made on these rodents. However, there is a lack of analysis of masticatory system, in particular morphology of the teeth. Thus, this research seeks to describe anatomical and histological aspects of the agouti teeth. For this purpose, we used adult agouti, in which measurements and descriptions of teeth and dental tissues were made. It was observed that the dental arch of D. prymnolopha comprises of twenty teeth, evenly distributed in the upper and lower arch, being inferior teeth larger than their corresponding higher. The incisors are larger, and between the posterior premolars and molars, there is a gradual increase in length in the anterior-posterior arch. In microscopic examination, a prismatic appearance was observed consisting of enamel prisms arranged in different directions, behind the enamel and dentin with standard tubular dentinal tubules with variable diameter and far between, also showing a sinuous path from the inner portion to the junction with more superficial enamel. Morphological analysis of dental tissues showed that an enamel with structural organization adapted to the act of chewing and high impact dentin compatible with standard tubular function resilience and mechanical damping of masticatory forces, as found in larger animals, confirming the understanding of eating habits that define much of its ecological functions within the ecosystem they inhabit.

Effect of a Brazilian regional basic diet on the prevalence of caries in rats

The aim of the present study was to determine the effect of a regional basic diet (RBD) on the prevalence of caries in the molar teeth of rats of both sexes aged 23 days. The animals were divided into six groups of 10 rats each receiving the following diets for 30 and 60 days after weaning: RBD, a cariogenic diet, and a commercial diet. The prevalence and penetration of caries in the molar teeth of the rats was then analyzed. The RBD produced caries in 37.5% of the teeth of animals fed 30 days, and in 83.4% of animals fed 60 days, while the cariogenic diet produced caries in 72.5% and 77.5% of the teeth of animals fed 30 and 60 days, respectively. Rats fed the RBD for 30 days had caries in the enamel in 38% of their teeth, 48% had superficial dentin caries, and 7.5% moderate dentin caries. The effect of the RBD did not differ significantly from that of the cariogenic diet in terms of the presence of caries in rats fed 60 days. The penetration depth of the caries produced by the RBD was the same as that produced by the cariogenic diet. Our results show that the RBD has the same cariogenic potential as the cariogenic diet. Since the RBD is the only option for the low-income population, there should be a study of how to compensate for the cariogenicity of this diet.

Comparaison de la force d'adhésion de deux types de résines de collage appliquées sur des surfaces métalliques traitées de différentes façons : une étude in vitro

L’objectif de cette étude était d’évaluer et de comparer la force d’adhésion de deux résines de collage: le ClearfilTM Esthetic Cement & DC Bond Kit (C) et le RelyXTM Unicem (R), sur trois adhérents différents : une surface d’émail, un alliage de métaux non précieux (Np) et un alliage de métaux semi-précieux (Sp). La surface des échantillons des alliages métalliques a subi différents traitements de surface. Sur l’émail (n=15) ainsi que sur les plaquettes d’alliages Np et Sp (n=15), des cylindres de résine étaient appliqués et polymérisés. Suite au processus de collage, les échantillons ont été incubés à 37°C pendant 24 heures, puis ont subi 500 cycles de thermocyclage. Des tests de cisaillement ont été effectués, suivi par l’analyse de la surface des échantillons au microscope à balayage électronique. Une comparaison de type T-test et des comparaisons multiples post hoc, ont été effectuées pour l’analyse statistique (p 0,05). Sur l’émail, les résultats ont démontré que la résine C présentait une force d'adhésion moyenne statistiquement supérieure (33,97±17,18 MPa) à la résine R (10,48±11,23 MPa) (p 0,05). Le type d’alliage utilisé n’influençait pas la force d’adhésion, et ce, peu importe le type de résine de collage (p>0,05). Pour le groupe Sp, la résine C a démontré une adhésion statistiquement supérieure à la résine R, et ce, pour tous les traitements de surface (p 0,05). En conclusion, la résine C a démontré des résultats d’adhésion significativement supérieurs à la résine R sur l’émail ainsi que sur presque toutes les surfaces traitées des alliages de métaux.

Chasseurs de bisons : apports de l’archéozoologie et de la biogéochimie isotopique à l’étude palethnographique et paléoéthologique du gisement épigravettien d’Amvrosievka (Ukraine)

Réalisé en cotutelle avec le Département de Préhistoire du Muséum national d’Histoire naturelle (Paris, France), École doctorale « Sciences de la nature et de l’Homme » (ED 227)

Effets des fluorures sur l'activité antimicrobienne des antibiotiques contre Staphylococcus aureus et Pseudomonas aeruginosa

L’émergence des souches bactériennes résistantes aux antibiotiques est un phénomène inquiétant, qui se répand à travers le monde. Staphylococcus aureus et Pseudomonas aeruginosa sont des bactéries pathogènes opportunistes multi résistantes qui peuvent causer plusieurs maladies. Cependant, ces bactéries deviennent difficiles à traiter avec des antibiotiques sans occasionner de toxicité. Alors pour trouver des solutions, c’est nécessaire de développer de nouvelles molécules afin de combattre les agents pathogènes résistants. Grâce à leur action pharmacologique, les fluorures exercent un certain effet antibactérien au niveau de l'émail des dents; donc, leur association aux antibiotiques pourrait bien a méliorer l’activité antimicrobienne. De ce fait, nous nous sommes proposés d’étudier les activités in vitro de la vancomycine (VAN), l’oxacilline (OXA), la ceftazidime (CFT) et la méropenème (MER) libre ou associée au fluorure de sodium (NaF) et fluorure de lithium (LiF) qui ont été évaluées sur des souches S.aureus et P.aeruginosa sensibles et résistantes, par la méthode de la microdilution en bouillon, déterminant leur concentration minimale inhibitrice (CMI), leur concentration minimale bactéricide (CMB), leur courbe cinétique (Time-Kill). Leur cytotoxicité sur les globules rouges humains, et leur stabilité à la température de 4°C et 22°C ont été étudiées. Les associations des antimicrobiens aux dérivés des fluorures ont montré une amélioration de l’effet des antibiotiques par la réduction des leurs concentrations et toxicité pour traiter correctement ces pathogènes résistants. Par conséquent, des antibiotiques associés aux dérivés de fluorure pourraient devenir une option de traitement contre des souches résistantes afin de diminuer la toxicité causée par de fortes doses des antibiotiques conventionnels.

Évolution des pratiques alimentaires en cours de vie : une étude isotopique multi-matérielle de la population du cimetière Saint-Matthew (Québec, 1771-1860)

En tant que population majoritairement immigrante, les protestants inhumés au cimetière Saint-Matthew, ville de Québec (1771-1860) ont dû s'adapter à un nouvel environnement à leur arrivée au Québec, et donc à de nouvelles ressources. Parallèlement, les 18e et 19e siècles sont marqués par un contexte socio-économique en pleine mutation avec l'arrivée graduelle de la période industrielle, et la ville de Québec, avec son contexte portuaire, a ainsi été au coeur de ces changements. L'objectif de ce mémoire est d'évaluer si la géochimie des isotopes stables appliquée à plusieurs matériaux du squelette humain (collagène et apatite de l'os, collagène de la dentine, et carbonate de l'émail) permet de mieux comprendre comment les comportements alimentaires des individus analysés provenant de ce cimetière cosmopolite (n=40) ont évolué en cours de vie. L'alimentation étant influencée par des conditions socio-économiques, culturelles et environnementales, cela peut nous informer indirectement sur les processus d'adaptation et l'identité d'un individu. C'est dans cette perspective d'écologie culturelle que nous avons interprété les données recueillies lors de ce projet, en complément aux analyses effectuées précédemment par Morland (2009) et Caron (2013). Nos résultats corroborent les tendances déjà observées, soit des pratiques alimentaires semblables à celles que l'on retrouve en Europe, et des immigrants provenant majoritairement des Îles Britanniques. Ils démontrent également une légère augmentation de la consommation de ressources C4, comme le maïs et la canne à sucre, à l'âge adulte pour 90% des individus analysés, de même qu'une baisse du niveau de protéines. Par ailleurs, les individus étudiés ont généralement eu tendance à conserver le même niveau alimentaire les uns par rapport aux autres tout au cours de leur vie, même si les pratiques étaient moins diversifiés à l'âge adulte. Finalement, on constate des similarités de comportements avec les populations irlandaises et britanniques plus pauvres durant l'enfance, alors qu'ils ressemblent davantage à ceux visibles dans la vallée laurentienne en fin de vie, notamment en ce qui concerne l'apport en protéines. Nos résultats suggèrent donc des changements alimentaires significatifs, fort possiblement liés aux processus de migration et à une adaptation constante à un nouvel environnement de la part des individus étudiés.

Spectroscopic Investigation of Tooth Caries and Demineralization

Dental caries persists to be the most predominant oral disease in spite of remarkable progress made during the past half- century to reduce its prevalence. Early diagnosis of carious lesions is an important factor in the prevention and management of dental caries. Conventional procedures for caries detection involve visual-tactile and radiographic examination, which is considered as “gold standard”. These techniques are subjective and are unable to detect the lesions until they are well advanced and involve about one-third of the thickness of enamel. Therefore, all these factors necessitate the need for the development of new techniques for early diagnosis of carious lesions. Researchers have been trying to develop various instruments based on optical spectroscopic techniques for detection of dental caries during the last two decades. These optical spectroscopic techniques facilitate noninvasive and real-time tissue characterization with reduced radiation exposure to patient, thereby improving the management of dental caries. Nonetheless, a costeffective optical system with adequate sensitivity and specificity for clinical use is still not realized and development of such a system is a challenging task.Two key techniques based on the optical properties of dental hard tissues are discussed in this current thesis, namely laser-induced fluorescence (LIF) and diffuse reflectance (DR) spectroscopy for detection of tooth caries and demineralization. The work described in this thesis is mainly of applied nature, focusing on the analysis of data from in vitro tooth samples and extending these results to diagnose dental caries in a clinical environment. The work mainly aims to improve and contribute to the contemporary research on fluorescence and diffuse reflectance for discriminating different stages of carious lesions. Towards this, a portable and compact laser-induced fluorescence and reflectance spectroscopic system (LIFRS) was developed for point monitoring of fluorescence and diffuse reflectance spectra from tooth samples. The LIFRS system uses either a 337 nm nitrogen laser or a 404 nm diode laser for the excitation of tooth autofluorescence and a white light source (tungsten halogen lamp) for measuring diffuse reflectance.Extensive in vitro studies were carried out on extracted tooth samples to test the applicability of LIFRS system for detecting dental caries, before being tested in a clinical environment. Both LIF and DR studies were performed for diagnosis of dental caries, but special emphasis was given for early detection and also to discriminate between different stages of carious lesions. Further the potential of LIFRS system in detecting demineralization and remineralization were also assessed.In the clinical trial on 105 patients, fluorescence reference standard (FRS) criteria was developed based on LIF spectral ratios (F500/F635 and F500/F680) to discriminate different stages of caries and for early detection of dental caries. The FRS ratio scatter plots developed showed better sensitivity and specificity as compared to clinical and radiographic examination, and the results were validated with the blindtests. Moreover, the LIF spectra were analyzed by curve-fitting using Gaussian spectral functions and the derived curve-fitted parameters such as peak position, Gaussian curve area, amplitude and width were found to be useful for distinguishing different stages of caries. In DR studies, a novel method was established based on DR ratios (R500/R700, R600/R700 and R650/R700) to detect dental caries with improved accuracy. Further the diagnostic accuracy of LIFRS system was evaluated in terms of sensitivity, specificity and area under the ROC curve. On the basis of these results, the LIFRS system was found useful as a valuable adjunct to the clinicians for detecting carious lesions.

L’amant tenu par la bride : Itinéraires d'un motif courtois chez Gaucelm Faidit et sur un coffret limousin

A comparison between selected lyrics and iconography of the late twelfth-century troubadour Gaucelm Faidit and a 'courtly love' image on a secular casket of Limoges enamel produced in the same period.

New age estimates for the Palaeolithic assemblages and Pleistocene succession of Casablanca, Morocco

Marine and aeolian Quaternary sediments from Casablanca, Morocco were dated using the optically stimulated luminescence (OSL) signal of quartz grains. These sediments form part of an extensive succession spanning the Pleistocene, and contain a rich faunal and archaeological record, including an Acheulian lithic assemblage from before the Brunhes–Matayama boundary, and a Homo erectus jaw from younger cave deposits. Sediment samples from the sites of Reddad Ben Ali, Oulad J’mel, Sidi Abderhamane and Thomas Quarries have been dated, in order to assess the upper limits of OSL. The revision of previously measured mammalian tooth enamel electron spin resonance (ESR) dates from the Grotte des Rhinocéros, Oulad Hamida Quarry 1, incorporating updated environmental dose rate measurements and attenuation calculations, also provide chronological constraint for the archaeological material preserved at Thomas Quarries. Several OSL age estimates extend back to around 500,000 years, with a single sample providing an OSL age close to 1 Ma in magnetically reversed sediments. These luminescence dates are some of the oldest determined, and their reliability is assessed using both internal criteria based on stratigraphic consistency, and external lithostratigraphic, morphostratigraphic and independent chronological constraints. For most samples, good internal agreement is observed using single aliquot regenerative-dose OSL measurements, while multiple aliquot additive-dose measurements generally have poorer resolution and consistency. Novel slow-component and component-resolved OSL approaches applied to four samples provide significantly enhanced dating precision, and an examination of the degree of signal zeroing at deposition. A comparison of the OSL age estimates with the updated ESR dates and one U-series date demonstrate that this method has great potential for providing reliable age estimates for sediments of this antiquity. We consider the cause of some slight age inversion observed at Thomas Quarries, and provide recommendations for further luminescence dating within this succession.

Dying young: a palaeopathological analysis of child health in Roman Britain

Children represent the most vulnerable members of society, and as such provide valuable insight into past lifeways. Adverse environmental conditions translate more readily into the osteological record of children, making them primary evidence for the investigation of ill-health in the past. To date, most information on growing up in Roman Britain has been based on the Classical literature, or discussed in palaeopathological studies with a regional focus, e.g. Dorset or Durnovaria. Thus, the lifestyles and everyday realities of children throughout Britannia remained largely unknown. This study sets out to fill this gap by providing the first large scale analysis of Romano-British children from town and country. The palaeopathological analysis of 1643 non-adult (0-17 years) skeletons, compiled from the literature (N=690) and primary osteological analysis (N=953), from 27 urban and rural settlements has highlighted diverse patterns in non-adult mortality and morbidity. The distribution of ages-at-death suggest that older children and adolescents migrated from country to town, possibly for commencing their working lives. True prevalence rates suggest that caries (1.8%) and enamel hypoplasia (11.4%) were more common in children from major urban towns, whereas children in the countryside displayed higher frequencies of scurvy (6.9%), cribra orbitalia (27.7%), porotic hyperostosis (6.2%) and endocranial lesions (10.9%). Social inequality in late Roman Britain may have been the driving force behind these urban-rural dichotomies. The results may point to exploitation of the peasantry on the one hand, and higher status of the urban population as a more ‘Romanised’ group on the other. Comparison with Iron Age and post-medieval non-adults also demonstrated a decline in health in the Roman period, with some levels of ill-health, particularly in the rural children, similar to those from post-medieval London. This research provides the most comprehensive study of non-adult morbidity and mortality in Roman Britain to date. It has provided new insights into Romano-British lifeways and presents suggestions for further work.

Influence of pulse repetition rate of Er : YAG laser and dentin depth on tensile bond strength of dentin-resin interface

The study evaluated the in vitro influence of pulse-repetition rate of Er:YAG laser and dentin depth on tensile bond strength of dentin-resin interface. Dentin surfaces of buccal or lingual surfaces from human third molars were submitted to tensile test in different depths (superficial, 1.0 and 1.5 mm) of the same dental area, using the same sample. Surface treatments were acid conditioning solely (control) and Er:YAG laser irradiation (80 mJ) followed by acid conditioning, with different pulse-repetition rates (1, 2, 3, or 4 Hz). Single bond/Z-250 system was used. The samples were stored in distilled water at 37 degrees C for 24 h, and then the first test (superficial dentine) was performed. The bond failures were analyzed. Following, the specimens were identified, grounded until 1.0- and 1.5-mm depths, submitted again to the treatments and to the second and, after that, to third-bond tests on a similar procedure and failure analysis. ANOVA and Tukey test demonstrated a significant difference (p < 0.001) for treatment and treatment X depth interaction (p < 0.05). The tested depths did not show influence (p > 0.05) on the bond strength of dentin-resin interface. It may be concluded that Er:YAG laser with 1, 2, 3, or 4 Hz combined with acid conditioning did not increase the resin tensile bond strength to dentin, regardless of dentin depth. (C) 2007 Wiley Periodicals, Inc.

Effect of blood contamination on the shear bond strength at resin/dentin interface in primary teeth

Purpose: To assess in vitro the shear bond strength at the resin/dentin interface in primary teeth after contamination with fresh human blood. Methods: 75 crowns of primary molars were embedded in acrylic resin and mechanically ground to expose a flat dentin surface. The specimens were randomly assigned to five groups (n=15), according to the surface treatment. Group I (control) had no blood contamination. The other groups were blood-contaminated and subjected to different post-contamination protocols: in Group 2, the surfaces were rinsed with water; in Group 3, the surfaces were air-dried; in Group 4, the surfaces were rinsed and air-dried; and in Group 5, no post-contamination treatment was done. In all groups, a 3-mm dentin bonding site was demarcated, Single Bond adhesive system was applied and resin composite cylinders were bonded. After 24 hours in distilled water, shear bond strength was tested at a crosshead speed of 0.5 mm/minute. Results: Means (in MPa) were: Group 1: 7.1 (+/- 4.2); Group 2: 4.0 (+/- 1.8); Group 3: 0.9 (+/- 0.7); Group 4: 3.9 (+/- 2.2) and Group 5: 1.3 (+/- 1.5). Data were analyzed statistically by the Kruskal-Wallis test at 5% significance level. Groups 2 and 4 were similar to each other (P > 0.05) and both ware similar to Group 1 (P > 0.05). These groups (2, 3 and 4) had statistically significantly higher bond strengths than Groups 3 and 5 (P < 0.05). Blood contamination negatively affected the shear bond strength to primary tooth dentin. Among the blood-contaminated groups, water-rinsed specimens had higher bond strengths than those that were exclusively air-dried or not submitted to any post-contamination protocol before adhesive application.

Bond strength of fibre glass and carbon fibre posts to the root canal walls using different resin cements

The aim of the study was to evaluate the bond strength of fibre glass and carbon fibre posts in the root canal walls cemented with self-adhesive (RelyX-Unicem) and chemical (Cement-Post) resin cements. Forty maxillary canines were divided into four groups according to the cement and post used and submitted to the push-out test (0.5 mm min(-1)). The data were submitted to statistical analysis (2-way ANOVA, Bonferroni - P < 0.05) and fracture analysis by Scanning Electronic Microscopy. Fibre glass presented the best results when cemented with RelyX-Unicem and Cement-Post (P < 0.05). RelyX-Unicem presented the highest bond strength values for both posts (P < 0.05). Fracture analysis showed predominance of cohesive fracture of post for RelyX-Unicem and adhesive fracture between dentin/cement and mixed for Cement-Post. The bond strength values were significantly affected by the type of post and cement used and the highest values were found for fibre glass posts and RelyX-Unicem.

Effect of Two Restorative Materials on Root Dentine Erosion

This study sought to evaluate the microhardness of root dentine adjacent to glass-ionomer and composite resin restorations after erosive challenge. A crossover study was performed in two phases of 4 consecutive days each. One hundred twelve bovine root dentine slabs were obtained, and standardized box-shaped cavities were prepared at center of each specimen. The prepared cavities were randomly restored with glass-ionomer cement or composite resin. The slabs were randomly assigned among 14 volunteers, which wore intraoral palatal device containing four restored root dentin slabs. Starting on the second day, half of the palatal acrylic devices were immersed extraorally in a lemonade-like carbonated soft drink for 90 s, four times daily for 3 days. Alter 3-day wash-out, dentine slabs restored with the alternative material were placed into palatal appliance and the volunteers started the second phase of this study. After erosive challenges. microhardness measurements were performed. Regardless of the restorative material employed, eroded specimens demonstrated lower microhardness value (p < 0.0001). At eroded condition examined in this study, dentine restored with glass-ionomer cement showed higher microhardness values (p < 0.0001). It may be concluded that the glass-ionomer cement decreases the progression of root dentine erosion at restoration margin. (C) 2010 Wiley Periodicals, Inc J Biomed Mater Res Part B Appl Biomater 93B 304-305, 2010

Effect of different bleaching systems on the ultrastructure of bovine dentin

The aim of this study was to evaluate in vitro the effect of different in-office bleaching systems on the surface morphology of bovine dentin. Thirty tooth fragments measuring 4 x 4mm, containing enamel and dentin, were obtained from the crowns of extracted bovine incisors. Samples were subjected to simulated intracoronal bleaching techniques using conventional (Opalescence Endo (R) and Whiteness Super Endo (R)) and light-activated systems (Opalescence Xtra (R) and Whiteness HP Maxx (R)). Controls were treated with either sodium perborate mixed with 10% hydrogen peroxide or no bleaching agent. The samples were observed under SEM and the recorded images were evaluated for topographic alterations. The ultrastructural alterations of dentin observed in this study varied greatly between groups according to the products used. Higher pH products (Whiteness HP Maxx (R) and Opalescence Xtra (R)) associated with in-office techniques yielded better maintenance of dentin ultrastructure. Apparently, both low pH and hydrogen peroxide oxidation play a role in altering the ultrastructure of dentin during internal dental bleaching. The use of alkaline products with reduced time of application (in-office techniques) may decrease such morphological alterations.