Design of a deployment rotation mechanism for microsatellite

Solar array rotation mechanism provides a hinged joint between the solar panel and satellite body, smooth rota-tion of the solar array into deployed position and its fixation in this position. After unlocking of solar panel (while in orbit), rotation bracket turns towards ready-to-work position under the action of driving spring. During deployment, once reached the required operating angle (defined by power subsystem engineer), the rotation bracket collides with the fixed bracket that is mounted on body of the satellite, to stop rotation. Due to the effect of collision force that may alter the rotation mechanism function, design of centrifugal brake is essential. At stoppage moment micro-switches activate final position sensor and a stopper locks the rotation bracket. Design of spring and centrifugal brake components, static finite element stress analysis of primary structure body of rotation mechanism at stoppage moment have been obtained. Last, reliability analysis of rotation mechanism is evaluated. The benefit of this study is to aid in the design of rotation mechanism that can be used in micro-satellite applications.

DESIGN, ANALYSIS, AND RELIABILTY OF SOLAR PANEL ROTATION MECHANISM FOR MICROSATELLITE

Solar array rotation mechanism provides a hinged joint between the solar panel and satellite body, smooth rotation of the solar array into deployed position and its fixation in this position. After unlocking of solar panel (while in orbit), rotation bracket turns towards ready-to-work position under the action of driving spring. During deployment, once reached the required operating angle (defined by power subsystem engineer), the rotation bracket collides with the fixed bracket that is mounted on body of the satellite, to stop rotation. Due to the effect of collision force that may alter the rotation mechanism function, design of centrifugal brake is essential. At stoppage moment micro-switches activate final position sensor and a stopper locks the rotation bracket. Design of spring and centrifugal brake components, static finite element stress analysis of primary structure body of rotation mechanism at stoppage moment have been obtained. Last, reliability analysis of rotation mechanism is evaluated. The benefit of this study is to aid in the design of rotation mechanism that can be used in micro-satellite applications.

Software-defined sphere decoding for FPGA-based MIMO detection

Sphere Decoding (SD) is a highly effective detection technique for Multiple-Input Multiple-Output (MIMO) wireless communications receivers, offering quasi-optimal accuracy with relatively low computational complexity as compared to the ideal ML detector. Despite this, the computational demands of even low-complexity SD variants, such as Fixed Complexity SD (FSD), remains such that implementation on modern software-defined network equipment is a highly challenging process, and indeed real-time solutions for MIMO systems such as 4 4 16-QAM 802.11n are unreported. This paper overcomes this barrier. By exploiting large-scale networks of fine-grained softwareprogrammable processors on Field Programmable Gate Array (FPGA), a series of unique SD implementations are presented, culminating in the only single-chip, real-time quasi-optimal SD for 44 16-QAM 802.11n MIMO. Furthermore, it demonstrates that the high performance software-defined architectures which enable these implementations exhibit cost comparable to dedicated circuit architectures.

Superimposed vibration confers no additional benefit compared with resistance training alone

Eighteen participants (22-43 years) were randomly allocated to one of two groups: resistance training combined with vibration (VIB; five males, four females) or resistance training alone (CON; five males, four females). Each participant trained three sessions per week (three sets of 10 seated calf raises against a load, which was increased progressively from 75% of one repetition maximum (1RM) to 90% 1RM for 4 weeks. For the VIB group, a vibratory stimulus (30 Hz, 2.5 mm amplitude) was applied to the soles of the feet by a vibration platform. The two groups did not differ significantly with respect to the total amount of work performed during training. Both groups showed a significant increase in maximum voluntary contraction and 1RM (P

Improving multi-site benefit functions via Bayesian model averaging: A new approach to benefit transfer

A benefit function transfer obtains estimates of willingness-to-pay (WTP) for the evaluation of a given policy at a site by combining existing information from different study sites. This has the advantage that more efficient estimates are obtained, but it relies on the assumption that the heterogeneity between sites is appropriately captured in the benefit transfer model. A more expensive alternative to estimate WTP is to analyze only data from the policy site in question while ignoring information from other sites. We make use of the fact that these two choices can be viewed as a model selection problem and extend the set of models to allow for the hypothesis that the benefit function is only applicable to a subset of sites. We show how Bayesian model averaging (BMA) techniques can be used to optimally combine information from all models. The Bayesian algorithm searches for the set of sites that can form the basis for estimating a benefit function and reveals whether such information can be transferred to new sites for which only a small data set is available. We illustrate the method with a sample of 42 forests from U.K. and Ireland. We find that BMA benefit function transfer produces reliable estimates and can increase about 8 times the information content of a small sample when the forest is 'poolable'. © 2008 Elsevier Inc. All rights reserved.

Multicentre randomised control trial comparing real time teledermatology with conventional outpatient dermatological care:societal cost-benefit analysis

Comparison of real time teledermatology with outpatient dermatology in terms of clinical outcomes, cost-benefits, and patient reattendance.

A comparison of real-time and store-and-forward teledermatology:a cost-benefit study

Increasing use of teledermatology should be based on demonstration of favourable accuracy and cost-benefit analysis for the different methods of use of this technique. Objectives To evaluate the clinical efficacy and cost-effectiveness of real-time and store-and-forward teledermatology.

Comparison of teleconsultations and face-to-face consultations:preliminary results of a United Kingdom multicentre teledermatology study

The objective of this multicentre study was to undertake a systematic comparison of face-to-face consultations and teleconsultations performed using low-cost videoconferencing equipment. One hundred and twenty-six patients were enrolled by their general practitioners across three sites. Each patient underwent a teleconsultation with a distant dermatologist followed by a traditional face-to-face consultation with a dermatologist. The main outcome measures were diagnostic concordance rates, management plans and patient and doctor satisfaction. One hundred and fifty-five diagnoses were identified by the face-to-face consultations from the sample of 126 patients. Identical diagnoses were recorded from both types of consultation in 59% of cases. Teledermatology consultations missed a secondary diagnosis in 6% of cases and were unable to make a useful diagnosis in 11% of cases. Wrong diagnoses were made by the teledermatologist in 4% of cases. Dermatologists were able to make a definitive diagnosis by face-to-face consultations in significantly more cases than by teleconsultations (P = 0.001). Where both types of consultation resulted in a single diagnosis there was a high level of agreement (kappa = 0.96, lower 95% confidence limit 0.91-1.00). Overall follow-up rates from both types of consultation were almost identical. Fifty per cent of patients seen could have been managed using a single videoconferenced teleconsultation without any requirement for further specialist intervention. Patients reported high levels of satisfaction with the teleconsultations. General practitioners reported that 75% of the teleconsultations were of educational benefit. This study illustrates the potential of telemedicine to diagnose and manage dermatology cases referred from primary care. Once the problem of image quality has been addressed, further studies will be required to investigate the cost-effectiveness of a teledermatology service and the potential consequences for the provision of dermatological services in the U.K.

In-vitro investigation of out-of-field cell survival following the delivery of conformal, intensity-modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) plans

The aim of this work is to determine the out-of-field survival of cells irradiated with either the primary field or scattered radiation in the presence and absence of intercellular communication following delivery of conformal, IMRT and VMAT treatment plans. Single beam, conformal, IMRT and VMAT plans were created to deliver 3 Gy to half the area of a T80 flask containing either DU-145 or AGO-1522 cells allowing intercellular communication between the in-and out-of-field cell populations. The same plans were delivered to a similar custom made phantom used to hold two T25 culture flasks, one flask in-field and one out-of-field to allow comparison of cell survival responses when intercellular communication is physically inhibited. Plans were created for the delivery of 8 Gy to the more radio-resistant DU-145 cells only in the presence and absence of intercellular communication. Cell survival was determined by clonogenic assay. In both cell lines, the out-of-field survival was not statistically different between delivery techniques for either cell line or dose. There was however, a statistically significant difference between survival out-of-field when intercellular communication was intact (single T80 culture flask) or inhibited (multiple T25 culture flasks) to in-field for all plans. No statistically significant difference was observed in-field with or without cellular communication to out-of-field for all plans. These data demonstrate out-of-field effects as important determinants of cell survival following exposure to modulated irradiation fields when cellular communication between differentially irradiated cell populations is present. This data is further evidence that refinement of existing radiobiological models to include indirect cell killing effects is required.

Availability of stage at diagnosis, cancer treatment delay and compliance with cancer guidelines as cancer registry indicators for cancer care in Europe:Results of EUROCHIP-3 survey

EUROCHIP (European Cancer Health Indicators Project) focuses on understanding inequalities in the cancer burden, care and survival by the indicators "stage at diagnosis," "cancer treatment delay" and "compliance with cancer guidelines" as the most important indicators. Our study aims at providing insight in whether cancer registries collect well-defined variables to determine these indicators in a comparative way. Eighty-six general European population-based cancer registries (PBCR) from 32 countries responded to the questionnaire, which was developed by EUROCHIP in collaboration with ENCR (European Network of Cancer Registries) and EUROCOURSE. Only 15% of all the PBCR in EU had all three indicators available. The indicator "stage at diagnosis" was gathered for at least one cancer site by 81% (using TNM in 39%). Variables for the indicator "cancer treatment delay" were collected by 37%. Availability of type of treatment (30%), surgery date (36%), starting date of radiotherapy (26%) and starting date of chemotherapy (23%) resulted in 15% of the PBCRs to be able to gather the indicator "compliance to guidelines". Lack of data source access and qualified staff were the major reasons for not collecting all the variables. In conclusion, based on self-reporting, a few of the participating PBCRs had data available which could be used for clinical audits, evaluation of cancer care projects, survival and for monitoring national cancer control strategies. Extra efforts should be made to improve this very efficient tool to compare cancer burden and the effects of the national cancer plans over Europe and to learn from each other. © 2012 UICC.

Family caregivers' ideal expectations of Canada's Compassionate Care Benefit

We present the findings of 57 interviews conducted in 2007-2008 with Canadians who have cared for a dying family member to examine their ideal expectations of the Compassionate Care Benefit (CCB) - a social programme providing job security and income support for workers caring for a dying person. Our aims are to (1) appreciate how intended users and other family caregivers view the programme's very nature; (2) identify programme challenges and improvements that emerge from considering family caregivers' ideal expectations; and (3) contribute to a larger evaluative study designed to make policy-relevant recommendations for CCB improvement. Review of transcripts across three respondent groups reveals four categories of ideal expectations: (1) eligibility, (2) informational, (3) timing and (4) financial. Ideal expectations were typically derived from respondents' experiences of care-giving, their knowledge of the programme and, for some, of applying for and/or receiving the CCB. Findings reveal that there are gaps between respondents' ideal expectations and their experienced realities. Such gaps may lead to disappointment being experienced by those who believe they should be eligible for the programme but are not, or should be entitled to receive some form of support that is not presently available. This analysis plays an important role in identifying potential changes for the CCB that may better support family caregivers, in that the ideal expectations serve as a starting point for articulating desirable programme amendments. This analysis also has wider relevance. For jurisdictions looking to create new social programmes to support caregivers based upon labour policy strategies and legislation, this analysis identifies considerations that should be made at the outset of development. For jurisdictions that already have employment-based caregiver support programmes, this analysis demonstrates that programme challenges may not always be met through legislative changes alone but also through measures such as increasing awareness. © 2011 Blackwell Publishing Ltd.