798 resultados para Computer-Based Training System


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tese (doutorado)—Universidade de Brasília, Instituto de Psicologia, Programa de Pós-Graduação em Processos de Desenvolvimento Humano e Saúde, 2016.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Abstract Purpose – To study the possibility of using a NIR hardware solution to photograph individuals in a private vehicle as well as an analysis of its images. Method – A study of existing theories around the NIR-method’s performance in selected conditions and individual tests were performed to examine if the literature statements were valid for this study. Two empirical tests have been carried out, the first was carried out at Kapsch test track and the other outside the test track in a single stationary test. An interview which formed the basis for the assessment on the quality of empirical data with a focus on computer-based detection of the number of individuals in the vehicle. Findings – The results have demonstrated the potential of the NIR method’s performance in a fully automated detection system for the number of individuals inside the vehicle. Empirical data indicates that the method can depict individuals inside vehicles of sufficiently high quality, but it is greatly affected by reflections, weather and light conditions. Implications – Result supports the assumption that the NIR method using an external light source can be used to image the interior through a varying number of weather and lightning conditions. The study originated until the results suggested that a NIR-based hardware setup can create images with high enough quality for the human eye to be able to detect the number of individuals inside the vehicle.If the overall performance into account, it suggests that the main problem with the use of the hardware set is to maintain the quality of the whole sample and that the crucial variables for the method’s performance is the influence of light and reflection conditions. Limitations – The major limitations have been that we limited ourselves to a subjective analysis of the selection and assessment on the image features for computer-based detection of the number of individuals in the vehicle. We were limited to two tests, one in tough conditions where only the driver was in the vehicle and the second stationary test, where the focus was on the number of people in vehicles and light sources impact on the result.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a web based expert system application that carries out an initial assessment of the feasibility of a web project. The system allows detection of inconsistency problems before design starts, and suggests correcting actions to solve them. The developed system presents important advantages not only for determining the feasibility of a web project but also by acting as a means of communication between the client company and the web development team, making the requirements specification clearer.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Effective and efficient implementation of intelligent and/or recently emerged networked manufacturing systems require an enterprise level integration. The networked manufacturing offers several advantages in the current competitive atmosphere by way to reduce, by shortening manufacturing cycle time and maintaining the production flexibility thereby achieving several feasible process plans. The first step in this direction is to integrate manufacturing functions such as process planning and scheduling for multi-jobs in a network based manufacturing system. It is difficult to determine a proper plan that meets conflicting objectives simultaneously. This paper describes a mobile-agent based negotiation approach to integrate manufacturing functions in a distributed manner; and its fundamental framework and functions are presented. Moreover, ontology has been constructed by using the Protégé software which possesses the flexibility to convert knowledge into Extensible Markup Language (XML) schema of Web Ontology Language (OWL) documents. The generated XML schemas have been used to transfer information throughout the manufacturing network for the intelligent interoperable integration of product data models and manufacturing resources. To validate the feasibility of the proposed approach, an illustrative example along with varied production environments that includes production demand fluctuations is presented and compared the proposed approach performance and its effectiveness with evolutionary algorithm based Hybrid Dynamic-DNA (HD-DNA) algorithm. The results show that the proposed scheme is very effective and reasonably acceptable for integration of manufacturing functions.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The first report commissioned by Ufi Charitable Trust. It investigates opportunities for and barriers to the application of digital technology to adult learning. It focuses on possible ways to transform the UK’s vocational education and training system, identifying three main priorities for funding by the Ufi Charitable Trust: * increasing the capability of those involved in running the vocational learning system * exploiting networks to bring together learners, learning content and learning professionals * harnessing computers to support individualised and differentiated learning.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Biomarkers are biological indicators of human health conditions. Their ultra-sensitive quantification is of paramount importance in clinical monitoring and early disease diagnosis. Biosensors are simple and easy-to-use analytical devices and, in their world, electrochemiluminescence (ECL) is one of the most promising analytical techniques that needs an ever-increasing sensitivity for improving its clinical effectiveness. Scope of this project was the investigation of the ECL generation mechanisms for enhancing the ECL intensity also through the identification of suitable nanostructures. The combination of nanotechnologies, microscopy and ECL has proved to be a very successful strategy to improve the analytical efficiency of ECL in one of its most promising bioanalytical approaches, the bead-based immunoassay. Nanosystems, such as [Ru(bpy)3]2+-dye-doped nanoparticles (DDSNPs) and Bodipy Carbon Nanodots, have been used to improve the sensitivity of ECL techniques thanks to their advantageous and tuneable properties, reaching a signal increase of 750% in DDSNPs-bead-based immunoassay system. In this thesis, an investigation of size and distance effects on the ECL mechanisms was carried out through the innovative combination of ECL microscopy and electrochemical mapping of radicals. It allowed the discovery of an unexpected and highly efficient mechanistic path for ECL generation at small distances from the electrode surface. It was exploited and enhanced through the addition of a branched amine DPIBA to the usual coreactant TPrA solution for enhancing the ECL efficiency until a maximum of 128%. Finally, a beads-based immunoassay and an immunosensor specific for cardiac Troponin I were built exploiting previous results and carbon nanotubes features. They created a conductive layer around beads enhancing the signal by 70% and activating an ECL mechanism unobserved before in such systems. In conclusion, the combination of ECL microscopy and nanotechnology and the deep understanding of the mechanisms responsible for the ECL emission led to a great enhancement in the signal.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work deals with the development of calibration procedures and control systems to improve the performance and efficiency of modern spark ignition turbocharged engines. The algorithms developed are used to optimize and manage the spark advance and the air-to-fuel ratio to control the knock and the exhaust gas temperature at the turbine inlet. The described work falls within the activity that the research group started in the previous years with the industrial partner Ferrari S.p.a. . The first chapter deals with the development of a control-oriented engine simulator based on a neural network approach, with which the main combustion indexes can be simulated. The second chapter deals with the development of a procedure to calibrate offline the spark advance and the air-to-fuel ratio to run the engine under knock-limited conditions and with the maximum admissible exhaust gas temperature at the turbine inlet. This procedure is then converted into a model-based control system and validated with a Software in the Loop approach using the engine simulator developed in the first chapter. Finally, it is implemented in a rapid control prototyping hardware to manage the combustion in steady-state and transient operating conditions at the test bench. The third chapter deals with the study of an innovative and cheap sensor for the in-cylinder pressure measurement, which is a piezoelectric washer that can be installed between the spark plug and the engine head. The signal generated by this kind of sensor is studied, developing a specific algorithm to adjust the value of the knock index in real-time. Finally, with the engine simulator developed in the first chapter, it is demonstrated that the innovative sensor can be coupled with the control system described in the second chapter and that the performance obtained could be the same reachable with the standard in-cylinder pressure sensors.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Recent technological advancements have played a key role in seamlessly integrating cloud, edge, and Internet of Things (IoT) technologies, giving rise to the Cloud-to-Thing Continuum paradigm. This cloud model connects many heterogeneous resources that generate a large amount of data and collaborate to deliver next-generation services. While it has the potential to reshape several application domains, the number of connected entities remarkably broadens the security attack surface. One of the main problems is the lack of security measures to adapt to the dynamic and evolving conditions of the Cloud-To-Thing Continuum. To address this challenge, this dissertation proposes novel adaptable security mechanisms. Adaptable security is the capability of security controls, systems, and protocols to dynamically adjust to changing conditions and scenarios. However, since the design and development of novel security mechanisms can be explored from different perspectives and levels, we place our attention on threat modeling and access control. The contributions of the thesis can be summarized as follows. First, we introduce a model-based methodology that secures the design of edge and cyber-physical systems. This solution identifies threats, security controls, and moving target defense techniques based on system features. Then, we focus on access control management. Since access control policies are subject to modifications, we evaluate how they can be efficiently shared among distributed areas, highlighting the effectiveness of distributed ledger technologies. Furthermore, we propose a risk-based authorization middleware, adjusting permissions based on real-time data, and a federated learning framework that enhances trustworthiness by weighting each client's contributions according to the quality of their partial models. Finally, since authorization revocation is another critical concern, we present an efficient revocation scheme for verifiable credentials in IoT networks, featuring decentralization, demanding minimum storage and computing capabilities. All the mechanisms have been evaluated in different conditions, proving their adaptability to the Cloud-to-Thing Continuum landscape.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study investigated the coralligenous reefs' benthic assemblages at 6 sites off Chioggia, in the northern Adriatic Sea, comparing 2 different methods of analysis of photographic samples: the grid method (overlapping a grid of 400 cells) and the random point method (random distribution of 100 points on the photo). For the first method, taxonomic recognition and the percentage coverage estimations were performed manually using photoQuad software. In the second, CoralNet semi-automated web-based annotation system was applied. This allows for assisted and supervised identification, the success rate of which gradually improves after initial software training. The results obtained with the two methods of analysing photographic samples are slightly different. The random points method gives lower species richness values and some differences in coverage estimations; all of this is reflected in the calculation of the biotic index. NAMBER values are significantly lower with the random points method and provide locally different classifications (3 out of 6 sites). However, the results obtained with the two methods are closely related to each other and depict a similar spatial trend. These results rise caution in applying different, albeit similar, methods in the analysis of benthic assemblages aimed to environmental quality assessment.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Universidade Estadual de Campinas . Faculdade de Educação Física

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Universidade Estadual de Campinas. Faculdade de Educação Física

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this study was to evaluate the tissue compatibility of a silorane-based resin system (FiltekTM Silorane) and a methacrylate-based nanoparticle resin (FiltekTM Supreme XT) after implantation in the subcutaneous connective tissue of isogenic mice. One hundred and thirty five male isogenic BALB/c mice were randomly assigned to 12 experimental and 3 control groups, according to the implanted material and the experimental period of 7, 21 and 63 days. At the end of each period, the animals were killed and the tubes with the surrounding tissues were removed and processed for microscopic analysis. Samples were subjected to a descriptive and a semi-quantitative analyses using a 4-point scoring system (0-3) to evaluate the collagen fiber formation and inflammatory infiltrate. Data were statistically analyzed using the Kruskal Wallis test (?=0.05). The results showed that there was no significant difference between the experimental and control groups considering the three evaluation periods (p>0.05). The silorane-based and the methacrylate-based nanoparticle resins presented similar tissue response to that of the empty tube (control group) after subcutaneous implantation in isogenic mice.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study evaluated in vitro the shear bond strength of a resin-based pit-and-fissure sealant (Fluroshield - F) associated with either an ethanol-based (Adper Single Bond 2 - SB) or an acetone-based (Prime & Bond - PB) adhesive system under conditions of oil contamination. Mesial and distal enamel surfaces from 30 sound third molars were randomly assigned to 2 groups (n=30): I - no oil contamination; II - oil contamination. Contamination (0.25 mL during 10 s) was performed after 37% phosphoric acid etching with an air/oil spray. The specimens were randomly assigned to subgroups, according to the bonding protocol adopted: subgroup A - F was applied to enamel without an intermediate bonding agent layer; In subgroups B and C, SB and PB, respectively, were applied, light-cured, and then F was applied and light-cured. Shear bond strength was tested at a crosshead speed of 0.5 mm/min in a universal testing machine. Means (± SD) in MPa were: IA-11.28 (±1.84); IIA-12.02 (±1.15); IB-9.73 (±2.38); IIB-9.62 (±2.29); IC-28.30 (±1.63); and IIC-25.50 (±1.91). It may be concluded that the oil contamination affected negatively the sealant bonding to enamel and the acetone-based adhesive system (PB) layer applied underneath the sealant was able to prevent its deleterious effects to adhesion.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

OBJETIVO: Avaliar a reprodutibilidade e a validade de indicadores de atividade física e sedentarismo, obtidos por sistema de vigilância baseado em inquéritos telefônicos. MÉTODOS: Foram realizadas análises de reprodutibilidade e validade em duas subamostras aleatórias (n=110 e n=111, respectivamente) da amostra total (N=2.024) de adultos (>18 anos), estudada pelo sistema, no município de São Paulo, em 2005. Os indicadores avaliados incluíram a freqüência de "suficientemente ativos no lazer", "inativos em quatro domínios da atividade física (lazer, trabalho, transporte e atividades domésticas)" e "ver televisão por longos períodos". A reprodutibilidade foi estudada comparando-se resultados obtidos a partir da entrevista telefônica original do sistema e de outra entrevista idêntica repetida após sete a 15 dias e feita por entrevistador diferente do que fez a entrevista original. A validade foi estudada comparando-se resultados obtidos a partir da entrevista telefônica original e de três recordatórios de 24 horas (método de referência) realizados na semana seguinte à entrevista original. RESULTADOS: A freqüência dos três indicadores avaliados foi idêntica ou muito próxima entre a primeira e a segunda entrevistas telefônicas, e os coeficientes kappa se situaram entre 0,53 e 0,80, indicando boa reprodutibilidade de todos os indicadores. Relativamente ao método de referência, evidenciou-se especificidade de 80% ou mais para os três indicadores e sensibilidade de 69,7% para "ver televisão por longos períodos", 59,1% para "inativos em quatro domínios" e 50% para "suficientemente ativos no lazer". CONCLUSÕES: Os indicadores de atividade física e sedentarismo empregados pelo sistema aparentam ser reprodutíveis e suficientemente acurados. Se mantido em operação nos próximos anos, o sistema poderá oferecer ao Brasil um instrumento útil para avaliação de políticas públicas de promoção da atividade física e controle das doenças crôni

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Despite the frequent use of stepping motors in robotics, automation, and a variety of precision instruments, they can hardly be found in rotational viscometers. This paper proposes the use of a stepping motor to drive a conventional constant-shear-rate laboratory rotational viscometer to avoid the use of velocity sensor and gearbox and, thus, simplify the instrument design. To investigate this driving technique, a commercial rotating viscometer has been adapted to be driven by a bipolar stepping motor, which is controlled via a personal computer. Special circuitry has been added to microstep the stepping motor at selectable step sizes and to condition the torque signal. Tests have been carried out using the prototype to produce flow curves for two standard Newtonian fluids (920 and 12 560 mPa (.) s, both at 25 degrees C). The flow curves have been obtained by employing several distinct microstep sizes within the shear rate range of 50-500 s(-1). The results indicate the feasibility of the proposed driving technique.