Banana and abaca fiber-reinforced plastic composites obtained by rotational molding process

Natural fibers can be used in rotational molding process to obtain parts with improved mechanical properties. Different approaches have been followed in order to produce formulations containing banana or abaca fiber at 5% weight, in two- and three-layer constructions. Chemically treated abaca fiber has also been studied, causing some problems in processability. Fibers used have been characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), optical microscopy, and single-fiber mechanical tests. Rotomolded parts have been tested for tensile, flexural, and impact properties, demonstrating that important increases in elastic modulus are achieved with these fibers, although impact properties are reduced. © 2013 Copyright Taylor and Francis Group, LLC.

Children with intellectual disabilities’ perceptions of their participation in activities in everyday life – a pilot study : A minor field study conducted in Ethiopia

Background: Children with disabilities living in low and middle income countries’ perceptions of participation are not shown in research. These perceptions are important for providing appropriate interventions. Aim: To describe how children aged 8-12 with an intellectual disability living in Ethiopia perceive their situation regarding participation in activities in everyday life. Method: A descriptive design with a quantitative approach was used. The sample was gathered using consecutive sampling. Fifteen structured interviews were conducted, using “Picture my participation,” an instrument under development. Analyses were made using SPSS Statistics and Microsoft Excel. Results: The children perceived that they participated in activities in everyday life. There was a broad variation in the activities the children prioritized as most important. On a group level, they were very involved in these activities. The majority did not experience any barriers to perform these activities. Conclusions: The perceptions of the majority of the children were that they were involved in daily activities. They did not experience any barriers to participation. The results should be read with caution and generalization is not possible, due to the sample characteristics and that the instrument is under development.

Pairings: Quintets and Duos from the Collaborative Piano Repertoire

Chamber music with piano comprises some of the greatest masterpieces in the Western canon. The works range from duo sonatas with various instruments through septets. In regard to duo sonatas, the violin is the instrument most frequently paired with the piano. Of all the chamber works for larger ensembles, the most popular is the quintet. In this dissertation, I will be exploring the similarities and differences between the duo sonatas and quintets of a given composer. I will be surveying Robert Schumann’s Piano Quintet in E-flat Major, Op. 44 along with his Violin and Piano Sonata in A Minor, Op. 105. The next pairing will be Johannes Brahms’ Piano Quintet in F Minor, Op. 34 and his Piano and Violin Sonata in D Minor, Op. 108. Dmitri Shostakovich’s Piano Quintet in G Minor, Op. 57 and his Cello and Piano Sonata in D Minor, Op. 40 will be the last two works examined in this dissertation. This dissertation project consisted of three recitals, presented in the Gildenhorn Recital Hall at the Clarice Smith Performing Arts Center of the University of Maryland. The recitals featured works by Johannes Brahms, Robert Schumann and Dmitri Shostakovich and took place on March 14, 2014, February 13, 2015 and November 22, 2015. All three recitals were recorded on compact discs, which can be accessed at the Digital Repository at the University of Maryland (DRUM) and at the University of Maryland Hornbake Library.

The Impact of a Simulated Clinical Experience on CEGEP Nursing Students’ Perceptions of Self-Efficacy and Achievement

Abstract : Providing high-quality clinical experiences to prepare students for the complexities of the current health-care system has become a challenge for nurse educators. Additionally, there are concerns that the current model of clinical practice is suboptimal. Consequently, nursing programs have explored the partial replacement of traditional in-hospital clinical experiences with a simulated clinical experience. Despite research demonstrating numerous benefits to students following participation in simulation activities, insufficient research conducted within Québec exists to convince the governing bodies (Ordre des infirmières et des infirmiers du Québec, OIIQ; Ministère de L’Éducation supérieur, de la Recherche, de la Science et de la Technologie) to fully embrace simulation as part of nurse training. The purpose of this study was to examine the use of a simulated clinical experience (SCE) as a viable, partial pedagogical substitute for traditional clinical experience by examining the effects of a SCE on CEGEP nursing students’ perceptions of self-efficacy (confidence), and their ability to achieve course objectives. The findings will contribute new information to the current body of research in simulation. The specific case of obstetrical practice was examined. Based on two sections of the Nursing III-Health and Illness (180-30K-AB) course, the sample was comprised of 65 students (thirty-one students from section 0001 and thirty-four students from section 0002) whose mean age was 24.8 years. With two sections of the course available, the opportunity for comparison was possible. A triangulation mixed method design was used. An adapted version of Ravert’s (2004) Nursing Skills for Evaluation tool was utilized to collect data regarding students’ perceptions of confidence related to the nursing skills required for care of mothers and their newborns. Students’ performance and achievement of course objectives was measured through an Objective Structured Clinical Examination (OSCE) consisting of three marked stations designed to test the theoretical and clinical aspects of course content. The OSCE was administered at the end of the semester following completion of the traditional clinical experience. Students’ qualitative comments on the post -test survey, along with journal entries served to support the quantitative scale evaluation. Two of the twelve days (15 hours) allocated for obstetrical clinical experience were replaced by a SCE (17%) over the course of the semester. Students participated in various simulation activities developed to address a range of cognitive, psychomotor and critical thinking skills. Scenarios incorporating the use of human patient simulators, and designed using the Jeffries Framework (2005), exposed students to the care of families and infants during the perinatal period to both reflect and build upon class and course content in achievement of course objectives and program competencies. Active participation in all simulation activities exposed students to Bandura’s four main sources of experience (mastery experiences, vicarious experiences, social persuasion, and physiologic/emotional responses) to enhance the development of students’ self-efficacy. Results of the pre-test and post-test summative scores revealed a statistically significant increase in student confidence in performing skills related to maternal and newborn care (p < .0001) following participation in the SCE. Confidence pre-test and post-test scores were not affected by the students’ section. Skills related to the care of the post-partum mother following vaginal or Caesarean section delivery showed the greatest change in confidence ratings. OSCE results showed a mean total class score (both sections) of 57.4 (70.0 %) with normal distribution. Mean scores were 56.5 (68.9%) for section 0001 and 58.3 (71.1%) for section 0002. Total scores were similar between sections (p =0.342) based on pairwise comparison. Analysis of OSCE scores as compared to students’ final course grade revealed similar distributions. Finally, qualitative analysis identified how students’ perceived the SCE. Students cited gains in knowledge, development of psychomotor skills and improved clinical judgement following participation in simulation activities. These were attributed to the « hands on » practice obtained from working in small groups, a safe and authentic learning environment and one in which students could make mistakes and correct errors as having the greatest impact on learning through simulation.

Trapping phosphorus (III) into polyoxometalates: synthesis, characterisation and electronic behaviour study

The introduction of electronically-active heteroanions into polyoxometalates (POMs) is one of the emerging topics in this field. The novel clusters have shown unprecedented intramolecular electron-transfer features that can be directly mediated by the incorporated heteroanions. In this thesis, we will focus on the study of phosphite (HPO32-) as new non-traditional heteroanions, discover HPO32- templated nanostructures, investigate their electronic behaviours as well as understand the self-assembly process of HPO32--templated species. The thesis starts with incorporating HPO32- into POM cages. The feasibility of this work was illustrated by the successful trapping of HPO32- into a “Trojan Horse” type {W18O56} nanocage. The reactivity of embedded {HPO3} was fully studied, showing the cluster undergoes a structural rearrangement in solution whereby the {HPO3} moieties dimerise to form a weakly interacting (O3PH···HPO3) moiety. In the crystalline state a temperature-dependent intramolecular redox reaction and structural rearrangement occurs. This rearrangement appears to proceed via an intermediate containing two different templates, a pyramidal {HPO3} and a tetrahedral {PO4} moiety. {HPO3} templated POM cages were then vigorously expanded and led to the isolation of five either fully oxidised or mixed-valence clusters trapped with mono-, di-, or tri- {HPO3}. Interestingly, an intriguing 3D honeycomb-like host-guest structure was also synthesised. The porous framework was self-aggregated by a tri-phopshite anion templated {W21} cluster with a {VO4} templated Wells-Dawson type {W18} acting as a guest species within the hexagonal channels. Based on this work, we further extended the templating anions to two different redox-active heteroanions, and discovered a unique mixed-heteroatom templated system built by pairing redox-active {HPIIIO3} with {TeO3}, {SeO3} or {AsO3}. Two molecular systems were developed, ie. “Trojan Horse” type [W18O56(HPO3)0.8(SeO3)1.2(H2O)2]8- and cross-shaped [H4P4X4W64O224]32-/36-, where X=TeIV, SeIV, AsIII. In the case of {W18(HPO3)0.8(SeO3)1.2}, the compound is found to be a mixture of heteroleptic {W18(HPO3)(SeO3)} and homoleptic {W18(SeO3)2} and {W18(HPO3)2}, identified by single crystal x-ray diffraction, NMR as well as high resolution mass spectrometry. The cluster exhibited similar temperature-dependent electronic features to “Trojan Horse” type {W18(HPO3)2O56}. However, due to the intrinsic reactivity difference between {HPO3} and {SeO3}, the thermal treatment leads to the formation of an unusual species [W18O55(PO4)(SeO3)]5-, in which {HPO3} was fully oxidised to {PO4} within the cage, whereas and lone-pair-containing {SeO3} heteroanions were kept intact inside the shell. This finding is extremely interesting, as it demonstrated that multiple and independent intramolecular electronic performance can be achieved by the coexistence of distinct heteroatoms within a single molecule. On the other hand, the cross-shaped [H4P4X4W64O224]32-/36- were constructed by four {W15(HPO3)(XO3)} building units linked by four {WO6} octahedra. Each building unit traps two different heteroatoms. It is interesting to note that the mixed heteroatom species show self-sorting, with a highly selective positional preference. Smaller ionic sized {HPO3} are self-organised into the uncapped side of {W15} cavity, whereas closed side are occupied by larger heteroatoms, which is surprisingly opposed to steric hindrance. Density functional theory (DFT) calculations are currently underway to have a full understanding of the preference of heteroatom substitutions. This series of clusters is of great interest in terms of achieving single molecule-based heteroatom-dependent multiple levels of electron transfer. It has opened a new way to design and synthesise POMs with higher diversity of electrical states, which may lead to a new type of Q-bits for quantum computing. The third chapter is focused on developing polyoxotungstate building blocks templated by {HPO3}. A series of building blocks, {W15O48(HPO3)2}, {W9O30(HPO3)} {W12O40(HPO3)2} and hexagonal {W6O18(HPO3)} have been obtained. The first four building blocks have been reported with {SeO3} and/or {TeO3} heteroanions. This result demonstrates {HPO3} has a similar reactivity as {SeO3} and {TeO3}, therefore studying the self-assembly of {HPO3}-based building blocks would be helpful to have a general understanding of pyramidal heteroatom-based molecular systems. The hexagonal {W6O18(HPO3)} is observed for the first time in polyoxotungstates, showing some of reactivity difference between {HPO3} and {SeO3} and {TeO3}. Furthermore, inorganic salts and pH values have some directing influence on the formation and transformation of various building blocks, resulting in the discovery of a family of {HPO3}-based clusters with nuclearity ranging from {W29} to {W106}. High resolution mass spectrometry was also carried out to investigate the cluster solution behaviour and also gain information of building block speciation. It is found that some clusters experienced decomposition, which gives rise to potential building blocks accountable for the self-assembly.

In situ characterization of porous VPO catalysts with fibrous structure: Identifying the redox behavior and the stability of active sites

Two VPO materials with fibrillar morphology have been prepared by the aid of electrospinning technique. One is a VPO carbon-supported material (VCF200) with fibrous morphology and very high surface area that is stable under oxidizing conditions up to 350C. The other material is a bulk mixed VPO oxide (VPO500) with fibrous structure obtained after optimizing the calcination of the carbon support in VCF200. Despite it is a bulk oxide material, this material exhibits a high surface area (> 60 m2/g). The redox behavior of both samples was monitored by in situ Raman spectroscopy under oxidation/reduction cycles. For the dehydrated supported sample (VCF200), the pyrophosphate phase (VO)2P2O7 (Raman ~930 cm-1) is detected, which has been described as the active phase (see Figure (a) below). This phase is quite stable since it does not disappear upon subsequent oxidation/reduction cycles. Under reduction conditions at 125C, in consecutive cycles, additional Raman bands appear at ~1090 cm-1 that are characteristic of the αII-VOPO4 phase. On the other hand, the bulk phases show a reversible behavior under redox cycles (Figure (b)). Under reducing conditions, a Raman band appears at ~980 cm-1 (β-VPO phase), whereas under oxidation conditions some segregation to VOx oxides occurs. Nevertheless, this segregation is reversible and the β-VPO phase forms again under reducing conditions. Thus, these results demonstrate that the active VPO phases of these fibrous catalysts are quite stable, and that their structure is reversible under several redox cycles, which make them suitable as oxidation catalysts.

Lower Aptian Comparative Stratigraphy of the Basco-Cantabrian Region (Spain) and Eastern Cordillera (Colombia): implications for local factors in the depositional record of Oceanic Anoxic Event 1a (OAE-1a)

An important episode of carbon sequestration, Oceanic Anoxic Event 1a (OAE-1a), characterizes the Lower Aptian worldwide, and is mostly known from deeper-water settings. The present work of two Lower Aptian deposits, Madotz (N Spain) and Curití Quarry (Colombia), is a multiproxy study that includes fossil assemblages, microfacies, X-ray diffraction bulk and clay mineralogy, elemental analyses (major, minor, trace elements), Rock-Eval pyrolysis, biomarkers, inorganic and organic carbon content, and stable carbon isotopes. The results provide baseline evidence of the local and global controlling environmental factors influencing OAE-1a in shallow-water settings. The data also improve our general understanding of the conditions under which organic-carbon-rich deposits accumulate. The sequence at Madotz includes four intervals (Unit 1; Subunits 2a, 2b and 2c) that overlap the times prior to, during and after the occurrence of OAE-1a. The Lower Unit 1(3m thick) is essentially siliciclastic, and Subunit 2a (20m) contains Urgonian carbonate facies that document abruptly changing platform conditions prior to OAE-1a. Subunit 2b (24.4 m) is a mixed carbonate-siliciclastic facies with orbitolinid-rich levels that coincides with OAE-1a δ13C stages C4-C6, and is coeval with the upper part of the Deshayesites forbesi ammonite zone. Levels with pyrite and the highest TOC values (0.4-0.97%), interpreted as accumulating under suboxic conditions, and are restricted to δ13C stages C4 and C5. The best development of the suboxic facies is at the level representing the peak of the transgression. Subunit 2c, within δ13C stage C7, shows a return of the Urgonian facies. The 23.35-m section at Curití includes a 6.3-m interval at the base of the Paja Formation dominated by organic-rich marlstones and shales lacking benthic fossils and bioturbation, with TOC values as high as 8.84%. The interval overlies a level containing reworked and phosphatized assemblages of middle Barremian to lowest Aptian ammonites. The range of values and the overall pattern of the δ13Corg (-22.05‰ to -20.47‰) in the 6.3m-interval is comparable with Lower Aptian δ13C stage C7. Thus, conditions of oxygen depletion at this site also occurred after Oceanic Anoxic Event-1a, which developed between carbon isotope stages C3 and C6. Both sites, Madotz and Curití, attest to the importance of terrigenous and nutrient fluxes in increasing OM productivity that led to episodic oxygen deficiency.

Molecular probes for monitoring mitochondrial movement and function

This thesis explores two distinct parts of mitochondrial physiology: the role of mitochondria in generation of reactive oxygen species (ROS) and mitochondrial morphology and dynamics within cells. The first area of research is covered in Chapters 1-8. Mitochondrial biofunctionality and ROS production are discussed in Chapter 1, followed by the strategy of targeting bioactive compounds to mitochondria by linking them to lipophilic triphenylphosphonium cations (TPP) (Chapter 2). ROS sensors relevant to the research are reviewed in Chapter 3. Chapter 4 presents design and synthesis of novel probes for superoxide detection in mitochondria (MitoNeo-D), cytosol (Neo-D) and extracellular environment (ExCellNeo-D). The results of biological validation of MitoNeo-D and Neo-D performed in the MRC MBU in Cambridge are presented in Chapter 5. A dicationic hydrogen peroxide sensor that utilizes in situ click chemistry is discussed in Chapter 6. Preliminary work on the synthesis of mitochondria-targeted superoxide generators, which led to the development of mitochondria-targeted analogue of paraquat, MitoPQ, is presented in Chapter 7. A set of bifunctional probes (BCN-Mal, BCN-E-BCN and Mito-iTag) for assessing the redox states of protein thiols is discussed in Chapter 8 along with their biological validation. The second part of the thesis is aimed at the study of mitochondrial morphology and dynamics and is presented in Chapters 9-11. Chapter 9 provides background on the classes of fluorophores relevant to the research, the phenomenon of fluorescence quenching and the principle of photoactivation with examples of photoactivatable fluorophores. Next, the background on mitochondrial morphology and heterogeneity is presented in Chapter 10, followed by the ways of imaging and tracking mitochondria within cells by conventional fluorophores and by photoactivatable fluorophores exploiting super-resolution microscopy. Chapter 11 presents the design and synthesis of four photoactivatable fluorophores for mitochondrial tracking, MitoPhotoRhod110, MitoPhotoNIR, Photo-E+, MitoPhoto-E+, along with results of biological validation of MitoPhotoNIR. The results and discussion concludes with Chapter 12, which is a summary and suggestions for future work, followed by the chemistry experimental procedures (Chapter 13), materials and methods for biological experiments (Chapter 14) and references.

Productive performance and parasitological control of kids supplemented with umbu fruits (Spondias tuberosa Arruda).

Native fruits from Caatinga vegetation can be an important alternative to improve the productive performance of kids in the semi-arid region of Brazil. This work aimed to evaluate the effect of supplementation with Umbuzeiro fruits in natura over the weight gain and anthelmintic control of kids kept in Buffel grass pasture in the semi-arid zone of Pernambuco, Brazil. Twenty-four castrated, crossbreed kids were allocated into three treatments: 1) Control (n = 8) fed exclusively with Buffel grass; 2) Umbu 1x (n = 8) fed with fruits once a week and 3) Umbu 3x (n = 8) fed with fruits for three times a week. The following parameters were evaluated: variation of body weight, faecal egg counts (FEC) and coproculture. Overall, the average consumption of Umbu fruits in natura was 1.48 kg/animal/day, which corresponded to 133.5 g daily dry matter intake (DMI/animal/day). There were no significant difference (P>0.05) for any parameters evaluated. During the experimental period, the overall daily weight gain was variable between 108.75 to 116.70 g/animal/day and the average FEC was 436 eggs. In the present study, the goat kids supplemented with fresh umbu fruits showed a good productive performance, however the supplementation with umbu did not control the infestation of gastrointestinal nematodes in kids.

Smart tracking of composite parts: feasibility study and effect on mechanical behaviour

This research proposes a solution for integrating RFID - Radio Frequency Identification technology within a structure based on CFRPs - Carbon Fiber Reinforced Polymers. Therefore, the main objective is to use technology to monitor and track composite components during manufacturing and service life. The study can be divided into two macro-areas. The first portion of the research evaluates the impact of the composite materials used on transmitting the electromagnetic signal to and from the tag. RFID technology communicates through radio frequencies to to track and trace items associated with the tags. In the first instance, a feasibility study was carried out to assess using commercially available tags. Then, after evaluating different solutions, it was decided to incorporate the tags into coupons during production. The second portion of the research is focused on evaluating the impact on the composite material's resistance to tag embedding. It starts with designing tensile test specimens through the FEM model with different housing configurations. Subsequently, the best configuration was tested in the facilities of the In the Faculty of Aerospace Engineering at TU Delft, particularly in the Structure & Materials Laboratory, two tests were conducted: the first one based on ASTM D3039/D3039 - 14 - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, the second one dividing the path to failure into failure intervals in a load-unload-reload. Both tests were accompanied by instruments such as DIC, AE, C-Scan and Optical Microscopes. The expected result of the inclusion of RFID tags in composite components is that it brings added value to the parts with which it is associated without affecting too much its mechanical properties. This comes first from the automatic identification of RFID during the production cycle and its useful life. As a result, improvements were made in the design of production facilities.

Chemical Composition And Free Radical-scavenging, Anticancer And Anti-inflammatory Activities Of The Essential Oil From Ocimum Kilimandscharicum.

The essential oil from the leaves of Ocimum kilimandscharicum (EOOK), collected in Dourados-MS, was investigated for anticancer, anti-inflammatory and antioxidant activity and chemical composition. The essential oil was extracted by hydrodistillation, and the chemical composition was performed by gas chromatography-mass spectrometry. The essential oil was evaluated for free radical-scavenging activity using the DPPH assay and was tested in an anticancer assay against ten human cancer cell lines. The response parameter (GI50) was calculated for the cell lines tested. The anti-inflammatory activity was evaluated using carrageenan-induced pleurisy in mice. The chemical composition showed 45 components with a predominance of monoterpenes, such as camphor (51.81%), 1,8 cineole (20.13%) and limonene (11.23%). The EOOK exhibited potent free radical-scavenging activity by the DPPH assay with a GI50 of 8.31 μg/ml. The major constituents, pure camphor (IC50=12.56 μg/ml) and mixture of the limonene: 1, 8 cineole (IC50=23.25 μg/ml) displayed a potent activity. The oral administration of EOOK (at 30 and 100 mg kg(-1)), as well as the pure camphor or a mixture of 1,8 cineole with limonene, significantly inhibited the carrageenan (Cg) induced pleurisy, reducing the migration of total leukocytes in mice by 82 ± 4% (30 mg kg(-1) of EOOK), 95 ± 4% (100 mg kg(-1) of EOOK), 83 ± 9% (camphor) and 80 ± 5% (mixture of 1,8 cineole:limonene 1:1). In vitro cytotoxicity screening against a human ovarian cancer cell line displayed high selectivity and potent anticancer activity with GI50=31.90 mg ml(-1). This work describes the anti-inflammatory, anticancer and antioxidant effects of EOOK for the first time. The essential oil exhibited marked anti-inflammatory, antioxidant and anticancer effects, an effect that can be attributed the presence of majorital compounds, and the response profiles from chemical composition differed from other oils collected in different locales.

Fatores associados à maior mortalidade e tempo de internação prolongado em uma unidade de terapia intensiva de adultos

OBJECTIVE: The intensive care unit is synonymous of high severity, and its mortality rates are between 5.4 and 33%. With the development of new technologies, a patient can be maintained for long time in the unit, causing high costs, psychological and moral for all involved. This study aimed to evaluate the risk factors for mortality and prolonged length of stay in an adult intensive care unit. METHODS: The study included all patients consecutively admitted to the adult medical/surgical intensive care unit of Hospital das Clínicas da Universidade Estadual de Campinas, for six months. We collected data such as sex, age, diagnosis, personal history, APACHE II score, days of invasive mechanical ventilation orotracheal reintubation, tracheostomy, days of hospitalization in the intensive care unit and discharge or death in the intensive care unit. RESULTS: Were included in the study 401 patients; 59.6% men and 40.4% women, age 53.8±18.0. The mean intensive care unit stay was 8.2±10.8 days, with a mortality rate of 13.5%. Significant data for mortality and prolonged length of stay in intensive care unit (p <0.0001), were: APACHE II>11, OT-Re and tracheostomy. CONCLUSION: The mortality and prolonged length of stay in intensive care unit intensive care unit as risk factors were: APACHE>11, orotracheal reintubation and tracheostomy.

Qualidade de vida e nivel de atividade fisica de funcionarios de empresa de tecnologia da comunicação

Universidade Estadual de Campinas . Faculdade de Educação Física

O uso de dicas especificas como estrategia de atenção seletiva em portadores da Sindrome de Down

Universidade Estadual de Campinas. Faculdade de Educação Física

Validade de equipamento eletronico informatizado para analise de movimentos tecnicos do voleibol : um estudo na categoria juvenil

Universidade Estadual de Campinas . Faculdade de Educação Física