Subsídio ao aprimoramento do manejo da irrigação de consórcios agroflorestais em situação de escassez hídrica

A demanda por água do setor agrícola vem crescendo a cada ano, bem como o aperfeiçoamento do manejo da irrigação. Ainda assim, em locais onde a água encontra-se escassa, os conflitos entre usos e usuários devido a disputas para acesso à água tendem a se intensificar. Na maioria das vezes esse problema está relacionado à ausência de cobertura florestal, levando, por vezes, a problemas socioambientais. Nesse contexto, a pesquisa buscou avaliar o impacto da implantação de sistemas agroflorestais (SAF’s) irrigados na condição hídrica local (de escassez), estabelecendo-se estratégias que os torne atrativos ambientalsocial- e economicamente. Assim, por meio de simulação computacional, alternativas de consórcios agroflorestais foram avaliadas, tomando-se como referência uma região piloto, típica da agricultura espírito-santense, constituída por pequenas propriedades agrícolas de base familiar, inseridas parcialmente em APPs. As espécies banana, pupunha e goiaba foram selecionadas para compor os cenários agroflorestais. Os resultados da pesquisa mostram que os SAF’s irrigados são uma alternativa no sentido de minimizar os conflitos por demandas de água em regiões de escassez hídrica, com a redução de tais demandas o comprometimento de rendimentos financeiros. Além disso, os SAF’s são alternativas para diversificação da renda e para tentar controlar a sazonalidade dos preços de mercado.

PHB-PEO electrospun fiber membranes containing chlorhexidine for drug delivery applications

Fiber meshes of poly(hydroxybutyrate) (PHB) and poly(hydroxybutyrate)/ poly(ethylene oxide) (PHB/PEO) with different concentrations of chlorhexidine (CHX) were prepared by electrospinning, for assessment as a polymer based drug delivery system. The electrospun fibers were characterized at morphological, molecular and mechanical levels. The bactericidal potential of PHB and PHB/PEO electrospun fibers with and without CHX was investigated against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) by disk diffusion susceptibility tests. Electrospun fibers containing CHX exhibited bactericidal activity. PHB/PEO-1%CHX displayed higher CHX release levels and equivalent antibacterial activity when compared to PHB/PEO with 5 and 10 wt% CHX. Bactericidal performance of samples with 1 wt% CHX was assessed by Colony Forming Units (CFU), where a reduction of 100 % and 99.69 % against E. coli and S. aureus were achieved, respectively.

Effect of neutralization and cross-linking on the thermal degradation of chitosan electrospun membranes

Thermal degradation of as electrospun chitosan membranes and samples subsequently treated with ethanol and cross-linked with glutaraldehyde (GA) have been studied by thermogravimetry (TG) coupled with an infrared spectrometer (FTIR). The influence of the electrospinning process and cross-linking in the electrospun chitosan thermal stability was evaluated. Up to three degradation steps were observed in the TG data, corresponding to water dehydration reaction at temperatures below 100 ºC, loss of side groups formed between the amine groups of chitosan and trifluoroacetic acid between 150 – 270 ºC and chitosan thermal degradation that starts around 250 ºC and goes up to 400 ºC. The Kissinger model was employed to evaluate the activation energies of the electrospun membranes during isothermal experiments and revealed that thermal degradation activation energy increases for the samples processed by electrospinning and subsequent neutralization and cross-linking treatments with respect to the neat chitosan powder.

Uso da ampicilina sódica e cloranfenicol no controle de contaminantes na micropropagação de bananeira 'Thap maeo'

A micropropagação vem sendo desenvolvida e aperfeiçoada para elevar a taxa de multiplicação de plantas em curto espaço de tempo e melhorar a qualidade da produção de mudas. Contudo, a contaminação microbiana é um dos maiores problemas desta técnica. Este trabalho teve por objetivo avaliar a eficiência da descontaminação de explantes de bananeira durante o estabelecimento in vitro, com o uso dos antibióticos ampicilina sódica e cloranfenicol adicionados ao meio de cultura. O delineamento experimental utilizado foi o inteiramente casualizado constituído de cinco tratamentos e cinco repetições, sendo cada repetição representada por cinco explantes em diferentes concentrações de ampicilina sódica e cloranfenicol por vinte minutos. Os antibióticos foram adicionados separadamente ao meio de cultura em concentrações de 0, 5, 10, 15 e 20 mg L-1. Os dados foram submetidos à análise de variância e as médias comparadas pelo teste F e análise de regressão. Foram avaliadas as porcentagens de contaminação por bactérias, fungos e oxidação dos explantes. Os resultados permitiram concluir que os antibióticos apresentaram controle sobre contaminantes endógenos nos explantes de banana 'Thap maeo'. A concentração de 20 mg L-1 dos antibióticos ampicilina sódica e cloranfenicol proporcionou redução de 70% na infecção por bactérias e fungos.

Estudos sorológicos para pesquisa de anticorpos de arbovírus em população humana da região do Vale do Ribeira: IV - inquérito em escolares residentes no município de Iguape, SP (Brasil)

Relatam-se os resultados de inquérito sorológico para pesquisa de anticorpos de 17 arbovírus em 337 escolares de 6 a 14 anos de idade, residentes em quatro áreas, com diferentes características ecológicas, situadas no município de Iguape, Vale do Ribeira, do Estado de São Paulo (Brasil): 1 - zona urbana da cidade de Iguape; 2 - Rocio, bairro periférico com características rurais; 3 - zona de cultura extensiva de banana, na planície litorânea; 4 - zona de mata primitiva na região pré-serrana. Observou-se, em 8,31% dos investigados, a presença de anticorpos inibidores de hemaglutinação de arbovírus dos grupos antigênicos A, B, C, Bunyamwera, Simbu e Anopheles A. Evidenciou-se diferença significante na proporção dos soros positivos entre escolares residentes nas zonas de bananal e de mata (19,05% e 16,67%) e moradores na zona urbana e no bairro do Rocio (1,89% e 3,81%). Crianças sempre residentes na zona urbana de Iguape, sem hábito de freqüência a ambiente silvestre, apresentaram anticorpos neutralizantes para os vírus Caraparu e Rocio, sugerindo transmissão urbana desses agentes. Não há indícios sorológicos de infecções recentes causadas pelo flavivírus Rocio.

Comparação do padrão alimentar de mães de baixo nível sócio-econômico durante a fase de lactação e após o desmame

Analisou-se a ingestão de alimentos de 190 mães de baixo nível sócio-econômico, residentes no município de São Paulo, SP (Brasil) em dois momentos; durante a fase de lactação (Inquérito I) e após o seu término (Inquérito II). Para caracterizar o padrão alimentar do grupo e dimensionar o risco, utilizou-se o inquérito alimentar recordatório de 24 horas. Os resultados mostraram que o padrão alimentar das mães é constituído por alimentos pertencentes aos grupos de protetores (feijão, leite C e carne de vaca); reguladores (banana, laranja, alface e tomate) e energéticos (arroz, pão, batata, macarrão, açúcar refinado e óleo vegetal), indicando uma dieta qualitativamente adequada. Encontrou-se, ainda, diferença estatisticamente significante no consumo de leite, feijão e café nos dois momentos analisados, indicando um maior consumo do primeiro durante o aleitamento natural (Inquérito I) e um aumento na ingestão de feijão e café após o desmame (Inquérito II). Além disso, o déficit apresentado no Inquérito I foi na maioria das vezes calórico-protéico, enquanto que no Inquérito II foi predominantemente calórico, verificando-se que a amostra analisada representa grupo de risco à desnutrição protéico-calórica.

Finite element studies of the mechanical behaviour of the diaphragm in normal and pathological cases

The diaphragm is a muscular membrane separating the abdominal and thoracic cavities, and its motion is directly linked to respiration. In this study, using data from a 59-year-old female cadaver obtained from the Visible Human Project, the diaphragm is reconstructed and, from the corresponding solid object, a shell finite element mesh is generated and used in several analyses performed with the ABAQUS 6.7 software. These analyses consider the direction of the muscle fibres and the incompressibility of the tissue. The constitutive model for the isotropic strain energy as well as the passive and active strain energy stored in the fibres is adapted from Humphrey's model for cardiac muscles. Furthermore, numerical results for the diaphragmatic floor under pressure and active contraction in normal and pathological cases are presented.

Measurement of Photo Capacitance in Amorphous Silicon Photodiodes

This paper discusses the photodiode capacitance dependence on imposed light and applied voltage using different devices. The first device is a double amorphous silicon pin-pin photodiode; the second one a crystalline pin diode and the last one a single pin amorphous silicon diode. Double amorphous silicon diodes can be used as (de)multiplexer devices for optical communications. For short range applications, using plastic optical fibres, the WDM (wavelength-division multiplexing) technique can be used in the visible light range to encode multiple signals. Experimental results consist on measurements of the photodiode capacitance under different conditions of imposed light and applied voltage. The relation between the capacitive effects of the double diode and the quality of the semiconductor internal junction will be analysed. The dynamics of charge accumulations will be measured when the photodiode is illuminated by a pulsed monochromatic light.

Disponibilidade de polifenóis em frutas e hortaliças consumidas no Brasil

OBJETIVO: Estimar a disponibilidade de polifenóis totais em frutas e hortaliças consumidas no Brasil segundo macrorregião e identificar os principais alimentos-fonte que fazem parte do hábito alimentar nacional. MÉTODOS: O conteúdo de polifenóis foi determinado pelo método Folin-Ciocalteu e sua disponibilidade foi estimada com base na Pesquisa de Orçamentos Familiares 2002/2003. Foram escolhidos 12 alimentos de maior consumo, sendo seis "frutas tropicais" e seis "hortaliças folhosas e florais", "hortaliças frutosas" e "hortaliças tuberosas". A determinação de polifenóis foi realizada em três experimentos independentes, cada um em duplicata. A disponibilidade nacional de polifenóis foi estimada por grama de peso fresco de cada vegetal analisado. A ingestão diária per capita no Brasil e regiões foi calculada como sendo o aporte diário de polifenóis fornecido pelo consumo dos 12 alimentos analisados. RESULTADOS: O teor de polifenóis nos alimentos variou de 15,35 a 214,84mg EAG/100g peso fresco. A disponibilidade nacional, com base na quantidade, em kg, adquirida anualmente no Brasil foi de 48,3mg/dia, tendo a região Sudeste e a região Centro-Oeste os maiores e menores valores, respectivamente. A banana foi a principal fonte de polifenóis consumida no Brasil, variando conforme macrorregião. CONCLUSÕES: A estimativa de disponibilidade de polifenóis no Brasil encontrada foi semelhante à de outros países. Diferenças observadas entre as macrorregiões geográficas podem estar diretamente relacionadas às diferenças culturais de cada região. Apesar de não haver uma quantidade recomendada para o consumo de polifenóis, a adoção da recomendação diária de frutas e hortaliças representa um aumento de 16 vezes na disponibilidade nacional de polifenóis, demonstrando a relação entre o consumo destes grupos alimentares com a ingestão de compostos bioativos benéficos à saúde.

How to mimic the shapes of plant tendrils on the nano and microscale: spirals and helices of electrospun liquid crystalline cellulose derivatives

We show that suspended nano and microfibres electrospun from liquid crystalline cellulosic solutions will curl into spirals if they are supported at just one end, or, if they are supported at both ends, will twist into a helix of one handedness over half of its length and of the opposite handedness over the other half, the two halves being connected by a short straight section. This latter phenomenon, known as perversion, is a consequence of the intrinsic curvature of the fibres and of a topological conservation law. Furthermore, agreement between theory and experiment can only be achieved if account is taken of the intrinsic torsion of the fibres. Precisely the same behaviour is known to be exhibited by the tendrils of climbing plants such as Passiflora edulis, albeit on a lengthscale of millimetres, i.e., three to four orders of magnitude larger than in our fibres. This suggests that the same basic, coarse-grained physical model is applicable across a range of lengthscales.

First Curl, Then Wrinkle

The excellent properties of elastomers are exploited to trigger wrinkling instabilities in curved shells. Micro- and nano-fibres are produced by electrospinning and UV irradiated: each fibre consists of a soft core and a stiff outer half-shell. Upon solvent de-swelling, the fibres curl because the shell and the core have different natural lengths. Wrinkling only starts after the fibre has attained a well-defined helical shape. A simple analytical model is proposed to find the curling curvature and wrinkle wavelength, as well as the transition between the “curling” and “wrinkling” regimes. This new instability resembles that found in the tendrils of climbing plants as they dry and lignify.

Natural waste materials containing chitin as adsorbents for textile dyestuffs: batch and continuous studies

In this work three natural waste materials containing chitin were used as adsorbents for textile dyestuffs, namely the Anodonta (Anodonta cygnea) shell, the Sepia (Sepia officinalis) and the Squid (Loligo vulgaris) pens. The selected dyestuffs were the Cibacron green T3G-E (CI reactive green 12), and the Solophenyl green BLE 155% (CI direct green 26), both from CIBA, commonly used in cellulosic fibres dyeing, the most used fibres in the textile industry. Batch equilibrium studies showed that the materials’ adsorption capacities increase after a simple and inexpensive chemical treatment, which increases their porosity and chitin relative content. Kinetic studies suggested the existence of a high internal resistance in both systems. Fixed bed column experiments performed showed an improvement in adsorbents’ behaviour after chemical treatment. However, in the column experiments, the biodegradation was the main mechanism of dyestuff removal, allowing the materials’ bioregeneration. The adsorption was strongly reduced by the pore clogging effect of the biomass. The deproteinised Squid pen (grain size 0.500–1.41 mm) is the adsorbent with highest adsorption capacity (0.27 and 0.037 g/g, respectively, for the reactive and direct dyestuffs, at 20ºC), followed by the demineralised Sepia pen and Anodonta shell, behaving like pure chitin in all experiments, but showing inferior performances than the granular activated carbon tested in the column experiments.

Determination of methiocarb and Its degradation products, methiocarb sulfoxide and methiocarb sulfone, in bananas using QuEChERS extraction

The present work describes the development of an analytical method for the determination of methiocarb and its degradation products (methiocarb sulfoxide and methiocarb sulfone) in banana samples, using the QuEChERS (quick, easy, cheap, effective, rugged, and safe) procedure followed by liquid chromatography coupled to photodiode array detector (LCPAD). Calibration curves were linear in the range of 0.5−10 mg L−1 for all compounds studied. The average recoveries, measured at 0.1 mg kg−1 wet weight, were 92.0 (RSD = 1.8%, n = 3), 84.0 (RSD = 3.9%, n = 3), and 95.2% (RSD = 1.9%, n = 3) for methiocarb sulfoxide, methiocarb sulfone, and methiocarb, respectively. Banana samples treated with methiocarb were collected from an experimental field. The developed method was applied to the analysis of 24 samples (peel and pulp) and to 5 banana pulp samples. Generally, the highest levels were found for methiocarb sulfoxide and methiocarb. Methiocarb sulfone levels were below the limit of quantification, except in one sample (not detected).

Fracture toughness determination of adhesive and co-cured joints in natural fibre composites

Adhesive bonding has become more efficient in the last few decades due to the adhesives developments, granting higher strength and ductility. On the other hand, natural fibre composites have recently gained interest due to the low cost and density. It is therefore essential to predict the fracture behavior of joints between these materials, to assess the feasibility of joining or repairing with adhesives. In this work, the tensile fracture toughness (Gc n) of adhesive joints between natural fibre composites is studied, by bonding with a ductile adhesive and co-curing. Conventional methods to obtain Gc n are used for the co-cured specimens, while for the adhesive within the bonded joint, the J-integral is considered. For the J-integral calculation, an optical measurement method is developed for the evaluation of the crack tip opening and adherends rotation at the crack tip during the test, supported by a Matlab sub-routine for the automated extraction of these quantities. As output of this work, an optical method that allows an easier and quicker extraction of the parameters to obtain Gc n than the available methods is proposed (by the J-integral technique), and the fracture behaviour in tension of bonded and co-cured joints in jute-reinforced natural fibre composites is also provided for the subsequent strength prediction. Additionally, for the adhesively- bonded joints, the tensile cohesive law of the adhesive is derived by the direct method.

Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: a case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.