Rehabilitación energética de fachadas: Propuesta metodológica para la evaluación de soluciones innovadoras, basándose en el diagnóstico de viviendas sociales construidas entre 1940 y 1980

Se propone una metodología para la evaluación de soluciones constructivas de fachada para la rehabilitación de viviendas sociales, construidas entre el final de la Guerra Civil y la entrada en vigor de la norma básica NBE-CT-79, sobre condiciones térmicas en edificios. La metodología parte por un lado del análisis del estado actual en las viviendas, y por otro de la caracterización de las soluciones constructivas de rehabilitación, para la evaluación conjunta de las posibles mejoras. Esta evaluación persigue valorar su repercusión en la calidad del ambiente interior, y en la reducción de la demanda energética para acondicionamiento térmico. Se aplica sobre dos viviendas tipo que se han monitorizado en Madrid, utilizando dos soluciones innovadoras para rehabilitación energética, que disponen de documentos de idoneidad DIT y DITE. Una incorpora sobre la fachada tipo un aislamiento por el exterior, y otra incorpora un sistema de fachada ventilada, también sobre esta fachada tipo. El análisis de las viviendas se ha realizado a partir de la toma de datos, ensayos y estudio de detalle, llevados a cabo a lo largo de los años 2014 y 2015. El análisis de los sistemas de fachada se ha realizado a partir de ensayos controlados, comparando los resultados para tres tipos de fachada: una fachada tipo, habitual en la construcción de las viviendas de este periodo, y las dos soluciones innovadoras mencionadas. Una vez realizado el diagnóstico de las viviendas y el análisis de los ensayos de los sistemas constructivos, los resultados obtenidos se utilizan para generar los modelos de simulación sobre los que evaluar las mejoras. El periodo de estudio comprende cuatro décadas que comienzan en 1940, en un momento con escasos medios técnicos para la construcción, y que coincide con el comienzo del crecimiento en las grandes ciudades, y finaliza con la incorporación en la normativa de las exigencias de aislamiento en fachadas, de 1979. En la ciudad de Madrid las viviendas construidas en este periodo, suponen un 45% del total de viviendas censadas en 2011. La rehabilitación energética se ha ido incorporando en los sucesivos planes nacionales de vivienda como actuación protegida, y son muchos y muy diversos los planes de acción desde la administración en materia de vivienda social, tanto a nivel nacional como europeo. La vivienda queda incluida en materia de desarrollo y cohesión urbana, territorial y social, haciendo necesario un enfoque integrado. Los barrios de vivienda social forman parte de un patrimonio construido en los que los criterios de sostenibilidad toman especial interés y relevancia, ya que a través del tiempo se han construido como actores y testigos de su historia social, económica, ambiental y cultural. El diseño de los modelos y actuaciones de futuro se sustenta en la asimilación de esa complejidad y diversidad adquirida. Por otro lado, el actual reto que impone el calentamiento global obliga a plantear escenarios de adaptación y mejora en estos edificios, con una especial atención a la dependencia energética, el consumo de recursos, y emisiones de gases de efecto invernadero. La fachada es el elemento más importante de la envolvente en los edificios multifamiliares, siendo el lugar donde se produce el intercambio entre el ambiente interior y exterior. Su rehabilitación puede mejorar las prestaciones de habitabilidad en las viviendas, y disminuir la demanda de energía para alcanzar unas condiciones de confort estándar. El trabajo de investigación que se ha realizado, forma parte de una linea de investigación abierta sobre sistemas constructivos y habitabilidad en edificación. ABSTRACT A methodology for the evaluation of facade’s constructive solutions for social housing refurbishment, built between the end of the Civil War, and the entry into force of the basic standard NBE-CT-79 on thermal conditions in buildings is proposed. This methodology starts both with the analysis of the current status in dwellings, and with the characterization of rehabilitation’s constructive solutions performance, for the integrated assessment of improvements. The evaluation seeks to assess their impact on the indoor environmental quality, and on reducing the energy demand for thermal conditioning. The methodology is applied to two standard dwellings, that have been monitored in Madrid, with two innovative solutions for energy refurbishment, which have DIT and DITE assessment documents. One incorporates an exterior insulation, and the other incorporates a ventilated facade system. The analysis of the dwellings was made from data collection, testing and detailed study, conducted throughout 2014 and 2015. Analysis of the facade systems was made from controlled trials comparing the results for three types of façade: a standard usual facade common in the construction of this period, and the two innovative solutions mentioned. Based on the diagnosis of housing and systems analysis, the results are used to generate simulation models on which assess the improvements. The study period comprises four decades starting in 1940, at a time with limited technical resources for construction, which coincides with the beginning of growth in big cities, and ends with the incorporation in the 1979 legislation of the façade’s insulation requirements. In the city of Madrid the houses built in this period account for 45% of all households surveyed in 2011. As a “protected action” energy rehabilitation has been incorporated in successive national housing plans, and there are many and very different action plans from the Administration in the field of social housing, both at national and European level. An integrated approach is needed, due to the inclusion of housing in development and urban, territorial and social cohesion. Social housing neighborhoods are part of the built heritage. Sustainability criteria therefore are particularely relevant, since over time they have been built as actors and witnesses of their social, economic, environmental and cultural history. The design and performance of future models is based on the assimilation of this complexity and diversity acquired. On the other hand, the current challenge posed by global warming forces to consider scenarios for adaptation and improvement in these buildings, with particular attention to energy dependence, resource consumption, and greenhouse gas emissions. The facade is the most important element of the envelope in the multi-family buildings, being the place where the exchange occurs between the indoor and outdoor environments. Its rehabilitation can improve wellbeing in housing performance, and reduce energy demand to achieve standard comfort conditions. This research that has been done, is part of an open research line on construction and living conditions in buildings.

Analysing the complexity of the model-based decision making processes within the industrial management context

PURPOSE The decision-making process plays a key role in organizations. Every decision-making process produces a final choice that may or may not prompt action. Recurrently, decision makers find themselves in the dichotomous question of following a traditional sequence decision-making process where the output of a decision is used as the input of the next stage of the decision, or following a joint decision-making approach where several decisions are taken simultaneously. The implication of the decision-making process will impact different players of the organization. The choice of the decision- making approach becomes difficult to find, even with the current literature and practitioners’ knowledge. The pursuit of better ways for making decisions has been a common goal for academics and practitioners. Management scientists use different techniques and approaches to improve different types of decisions. The purpose of this decision is to use the available resources as well as possible (data and techniques) to achieve the objectives of the organization. The developing and applying of models and concepts may be helpful to solve managerial problems faced every day in different companies. As a result of this research different decision models are presented to contribute to the body of knowledge of management science. The first models are focused on the manufacturing industry and the second part of the models on the health care industry. Despite these models being case specific, they serve the purpose of exemplifying that different approaches to the problems and could provide interesting results. Unfortunately, there is no universal recipe that could be applied to all the problems. Furthermore, the same model could deliver good results with certain data and bad results for other data. A framework to analyse the data before selecting the model to be used is presented and tested in the models developed to exemplify the ideas. METHODOLOGY As the first step of the research a systematic literature review on the joint decision is presented, as are the different opinions and suggestions of different scholars. For the next stage of the thesis, the decision-making process of more than 50 companies was analysed in companies from different sectors in the production planning area at the Job Shop level. The data was obtained using surveys and face-to-face interviews. The following part of the research into the decision-making process was held in two application fields that are highly relevant for our society; manufacturing and health care. The first step was to study the interactions and develop a mathematical model for the replenishment of the car assembly where the problem of “Vehicle routing problem and Inventory” were combined. The next step was to add the scheduling or car production (car sequencing) decision and use some metaheuristics such as ant colony and genetic algorithms to measure if the behaviour is kept up with different case size problems. A similar approach is presented in a production of semiconductors and aviation parts, where a hoist has to change from one station to another to deal with the work, and a jobs schedule has to be done. However, for this problem simulation was used for experimentation. In parallel, the scheduling of operating rooms was studied. Surgeries were allocated to surgeons and the scheduling of operating rooms was analysed. The first part of the research was done in a Teaching hospital, and for the second part the interaction of uncertainty was added. Once the previous problem had been analysed a general framework to characterize the instance was built. In the final chapter a general conclusion is presented. FINDINGS AND PRACTICAL IMPLICATIONS The first part of the contributions is an update of the decision-making literature review. Also an analysis of the possible savings resulting from a change in the decision process is made. Then, the results of the survey, which present a lack of consistency between what the managers believe and the reality of the integration of their decisions. In the next stage of the thesis, a contribution to the body of knowledge of the operation research, with the joint solution of the replenishment, sequencing and inventory problem in the assembly line is made, together with a parallel work with the operating rooms scheduling where different solutions approaches are presented. In addition to the contribution of the solving methods, with the use of different techniques, the main contribution is the framework that is proposed to pre-evaluate the problem before thinking of the techniques to solve it. However, there is no straightforward answer as to whether it is better to have joint or sequential solutions. Following the proposed framework with the evaluation of factors such as the flexibility of the answer, the number of actors, and the tightness of the data, give us important hints as to the most suitable direction to take to tackle the problem. RESEARCH LIMITATIONS AND AVENUES FOR FUTURE RESEARCH In the first part of the work it was really complicated to calculate the possible savings of different projects, since in many papers these quantities are not reported or the impact is based on non-quantifiable benefits. The other issue is the confidentiality of many projects where the data cannot be presented. For the car assembly line problem more computational power would allow us to solve bigger instances. For the operation research problem there was a lack of historical data to perform a parallel analysis in the teaching hospital. In order to keep testing the decision framework it is necessary to keep applying more case studies in order to generalize the results and make them more evident and less ambiguous. The health care field offers great opportunities since despite the recent awareness of the need to improve the decision-making process there are many opportunities to improve. Another big difference with the automotive industry is that the last improvements are not spread among all the actors. Therefore, in the future this research will focus more on the collaboration between academia and the health care sector.

Materialidad poética: arquitectura suiza en el entorno de los Grisones 1992-2004

El entorno alpino de los Grisones ha sido un laboratorio donde experimentar un método arquitectónico procedente de diversas fuentes durante los años 70 en la ETHZ. Este método ha producido durante las últimas tres décadas un discurso teórico propiamente suizo alemán. La tradición continúa siendo un valor cultural para la comunidad alpina de los Grisones, que apuesta por seguir relacionando la arquitectura con su historia y su paisaje. La especificidad de cada entorno suizo alemán es un hecho obvio pero, por encima de sus rasgos característicos, hay un denominador común que les da unidad en silencio: se trata de una idea de la construcción. El fenómeno de los Grisones es territorial en su localización concreta, pero comparte el trasfondo teórico del resto de la arquitectura suizo alemana reciente. La tesis recorre transversalmente las condiciones que han dado lugar a esa trayectoria común hasta la actualidad, en que la arquitectura suizo alemana se halla precisamente en un momento de cambio generacional. La obra de Peter Märkli constituye en esta tesis un paradigma de la voluntad suizo alemana por formar parte de la continuidad cultural de la arquitectura, como una actitud de resistencia compartida frente al mundo globalizado. La tesis se articula a partir de ocho proyectos recientes, realizados por arquitectos suizo alemanes en el entorno del territorio alpino de los Grisones. Estos proyectos condensan la trayectoria arquitectónica suizo alemana durante el siglo XX, así como el fenómeno arquitectónico que ha tenido lugar en el entorno de los Grisones durante las últimas tres décadas. La tesis analiza a través de cada pareja de proyectos los episodios teóricos, artísticos y filosóficos más relevantes que se sintetizan en estas obras, así como sus referentes arquitectónicos y la dimensión trascendente de los materiales en los que la cultura suiza hunde sus raíces: la madera, la piedra y el hormigón. Las vanguardias pictóricas, el Movimiento Moderno y las corrientes humanistas y regionalistas que se fueron sucediendo durante el pasado siglo, configuran el escenario en el que tomó cuerpo la sensibilidad arquitectónica suizo alemana reciente, que emerge a través de la compleja red de relaciones establecidas entre el panorama suizo y el internacional. El mismo bagaje teórico subyace al territorio suizo alemán a nivel general, por lo que asociarlo a través de esta tesis a proyectos realizados en un entorno característico, permite acceder a una realización concreta de ese debate en un entorno tan particular como son los Grisones. La aproximación a los proyectos es de carácter fenomenológico: la experiencia directa de los mismos ha sido el sustrato fundamental del enfoque de la tesis. El trabajo de campo no se limitó a visitar los proyectos que vertebran la tesis, sino que trató de abarcar las obras más relevantes de la producción suizo alemana reciente en los Grisones, con el fin de adquirir cierto grado de sensibilidad perceptiva hacia la singularidad de su identidad territorial. La tesis hace especial hincapié en las obras de Peter Märkli y Peter Zumthor, representantes de los dos extremos del discurso suizo alemán reciente, respecto a la materialidad y al carácter de la secuencia espacial, sistemático o fluido respectivamente, pero que asimismo comparten el clasicismo formalista que subyace al fenómeno suizo alemán. Los dos proyectos que establecen el periodo 1992-2004 explorado por esta investigación constituyen dos hitos fundamentales. El Museo de La Congiunta en Giornico de Peter Märkli se construyó en 1992 y se erige a partir de entonces como un icono arquitectónico de la condensación típicamente suizo alemana de base reductiva. Este paradigma de síntesis conceptual y constructiva comenzó a forjarse en la década de 1930 de la mano del Konkrete Kunst formulado por Max Bill, que es la única manifestación artística genuinamente suiza del siglo XX y que desarrolló pictóricamente los valores de precisión, rigor, racionalismo y abstracción afines a la sensibilidad suizo alemana. En segundo lugar, el proyecto para la rehabilitación de la Villa Garbald y la construcción de la Torre Roccolo en Castasegna llevado a cabo por Miller & Maranta en 2004, supuso la consumación de la Analoge Architektur, que fue la primera corriente arquitectónica propiamente suiza, desarrollada durante la década de 1980 por Miroslav Sik. La Deutscher Tendenza es un periodo de la trayectoria suizo alemana reciente poco conocido, representado por una figura tan relevante como es Peter Zumthor. Las obras que proyectó Zumthor entre 1979 y 1985 forman parte de un periodo en que el arquitecto se encontraba profundamente influido por el neorracionalismo italiano, como ilustra la escuela de Churwalden de 1983. La arquitectura suizo alemana reciente exploró sistemáticamente los sistemas compositivos de las vanguardias pictóricas y del Movimiento Moderno, por encima de su formalismo concreto. La segunda fase de la obra de Zumthor entre 1985 y 1996 se caracteriza por la transfiguración del plano libre del sistema compositivo neoplasticista desarrollado por De Stijl, plano que adquirió grosor hasta convertirse en la caja articuladora de la fluidez de la secuencia espacial. El formalismo de Zumthor en esta fase implica la prioridad del esquema compositivo, compuesto por un perímetro regular en el que se reúnen las cajas que, como las superficies de color de las composiciones de Mondrian, articulan el espacio a su alrededor. La Residencia de Masans de Zumthor de 1993 es un proyecto canónico de este sistema compositivo, que culmina en el esquema radial de las Termas de Vals de 1996. La imagen poética se convirtió en el lenguaje propio del pensamiento de la arquitectura suizo alemana, que permitía una reflexión no verbal, a partir de unos pocos arquetipos fundamentales. Los arquitectos del Ticino buscaron en la Tendenza italiana durante la década de 1970 una alternativa al insostenible modelo territorial que estaba destruyendo su paisaje cultural. Algunos de estos arquitectos comenzaron a dar clase durante esa década en la ETHZ, por lo que transmitieron sus inquietudes al alumnado e introdujeron a Aldo Rossi en la facultad, que era uno de los máximos representantes de la Tendenza. El método analógico de Rossi, basado en la psicología analítica de Carl Jung, fue una influencia fundamental en la ETHZ durante los años 70. Rossi partía de una teoría afín al colectivo intelectual suizo que los arquitectos de la ETHZ pronto comprendieron que debían independizar del contexto italiano, desarrollando su propio método a partir de 1985 con la Analoge Architektur. El valor de la preexistencia de acuerdo a este método incipiente se hallaba en su papel articulador de la continuidad cultural de una comunidad, que Miroslav Sik definió a partir de su concepto de Altneue (literalmente, lo Nuevo-Viejo). La fusión entre lo nuevo y lo viejo era la base de la espontaneidad con la que habían crecido los asentamientos históricamente. Sik consideraba que la continuidad dependía de la comprensión de los patrones preexistentes, con el objeto de mantener su vigencia mediante la incorporación de estrategias contemporáneas, que renovarían su significado sin perder su esencia. La Casa Gugalun en Versam de Zumthor de 1994 supone una aproximación a escala doméstica a este planteamiento. La arquitectura suizo alemana reciente a menudo busca en sus referentes plásticos una manera de explorar ámbitos poco accesibles para la disciplina arquitectónica. El pensamiento arquitectónico basado en la imagen poética se implementa a partir de la tectónica de la construcción, que es el medio para comunicar una idea vertebradora del proyecto de principio a fin. La construcción como medio introduce el concepto clave de la apariencia de la arquitectura, estrechamente relacionado con la filosofía idealista de Friedrich Schiller. La apariencia debe expresar el sentido conceptual de la obra, que los arquitectos suizo alemanes denominan idea, por lo que la construcción no tiene un valor por sí misma, sino en cuanto a la apariencia. La Capilla de Oberrealta de Christian Kerez de 1993 puede ser considerada una obra escultórica en el paisaje, más próxima a las artes plásticas que a la arquitectura. La tensión que surge entre la figura ideal y la pieza sometida a una sutil deformación confiere un carácter dinámico a la composición, que intensifica el efecto perceptivo, de acuerdo a la teoría del pensamiento visual de Rudolph Arnheim. La deformación al servicio de la psicología de la percepción es un fenómeno que caracteriza la arquitectura suizo alemana reciente. El concepto de Forme Forte (forma fuerte) fue introducido por Martin Steinmann para caracterizar el objeto arquitectónico denominado internacionalmente Swiss Box. Este concepto se caracteriza por una predilección por lo monolítico, lo unitario y lo arquetípico. La condición más sustancial de una Forme Forte es, sin embargo, la de configurar un elemento estructurador del entorno. Tanto la base morfológica de una Forme Forte, como su capacidad para estructurar el lugar, se corresponden con los conceptos de arquetipo y monumento de la teoría de Rossi. La tesis explora el sentido de la deformación en la producción suizo alemana reciente, a partir de la Escuela de Paspels de Valerio Olgiati de 1998 y la Torre Roccolo de Villa Garbald de Miller&Maranta de 1998. La teoría tectónica de Gottfried Semper y la razón de la forma de Adolf Loos constituyen el sustrato teórico, que relaciona la actividad existencial de habitar con la materialidad de la arquitectura suizo alemana reciente. La teoría tectónica de Semper fundamenta las revisiones posteriores de los sistemas constructivos tradicionales suizo alemanes. Esta influencia sirvió como base a la vanguardia suiza de la Neues Bauen, que desarrolló un racionalismo funcionalista durante las décadas de 1920 y 1930, que constituye una gramática de base no simbólica. Esta gramática constituye el fundamento de la transición del orden clásico a la materialidad como instrumento compositivo durante la segunda mitad del siglo XX, consolidando el concepto de la base material de la forma. La revisión de la tradición regionalista y racionalista llevada a cabo por la generación de arquitectos suizo alemanes de la década de 1950 y 1960, constituyó una investigación lingüística sustancial. Rudolph Olgiati es la figura determinante de este periodo. La revisión de esta investigación se codificó en clave estructuralista durante los años 70 en la ETHZ, influenciada por la presencia de Roland Barthes como profesor invitado. Esta revisión constituyó la base de la articulación tectónica propiamente suizo alemana todavía vigente, como ilustra expresamente la obra de Burkhalter&Sumi en esta tesis. La obra de Gion Caminada en Vrin entre 1995 y 2002 aporta una intensa investigación sobre el Strickbau, que implementa una y otra vez variaciones sobre un sistema tradicional, ilustrando las infinitas posibilidades que ofrece un lenguaje, paradójicamente limitado por los medios disponibles en un entorno alpino aislado. Para terminar Jürg Conzett es el ingeniero con el que han desarrollado sus proyectos la mayoría de los arquitectos en el entorno de los Grisones, formado durante 8 años con Zumthor y colaborador habitual de Caminada entre otros. Conzett es el referente que relaciona la ingeniería con la arquitectura en el ámbito de esta tesis, imprescindible en el contexto de esta investigación. ABSTRACT The Alpine setting of Grisons has been a laboratory for architectural experimentation with an approach forged in the 1970s from various sources in the Swiss Federal Institute of Technology in Zurich (ETHZ). This method has produced a uniquely German-Swiss theoretical discourse over the past three decades. Tradition continues to be a cultural value for Grisons, a region committed to continue linking its architecture with the region’s history and landscape. The specificity of the German-Swiss environment is obvious, but beyond its characteristic features, there is a common denominator that gives these settings a silent unity: it is an idea of building. The phenomenon of Grisons is geographic in its specific location, but it shares the theoretical basis of the rest of the new German-Swiss architecture. This thesis transversely delves into the conditions that have shaped this common path up to the present, just as German-Swiss architecture is going through a time of generational change. In this thesis, Märkli Peter's work constitutes a paradigm of the German-Swiss will to uphold the cultural and architectural continuity of the region, exemplifying an attitude of shared resistance to the globalized world. The thesis is structured around eight recent projects carried out by German-Swiss architects in the Alpine region of Grisons. These projects represent the trajectory of twentieth century German-Swiss architectural history, as well as the architectural phenomenon that has taken place in the environs of Grisons over the past three decades. Through these projects the thesis analyzes the most relevant theoretical, artistic and philosophical references that are synthesized in the works, as well as their architectural references and the transcendental dimension of the materials in which Swiss culture is rooted: wood, stone and concrete. The artistic avant-garde, together with Modernism and the humanistic and regional movements that occurred during the last century, set the stage for present-day German-Swiss architectural sensitivity, which emerges from a complex web of relationships established between the Swiss and international panorama. This same theoretical background and experience underlies all of the German-Swiss territory in general, so associating it through this thesis to a particular context allows the description of a specific embodiment of this debate, within the unique environment of Grisons. The methodological approach to analyzing the projects was phenomenological: direct experience is the main substrate underpinning the focus of the thesis. Field work was not limited to visiting the projects featured in the thesis, but rather encompassed the most important works of recent German-Swiss construction in the Grisons in order to gain some degree of perceptual sensitivity to the uniqueness of its territorial identity. The present paper puts special emphasis on the works of Peter Märkli and Peter Zumthor, who share the formal classicist perspective of the German-Swiss context but stand on opposite sides of the philosophical spectrum with regard to the notion of materiality and the nature of space, which they conceive as systematic or fluid, respectively. The two projects that establish the boundaries of the time period 1992–2004 explored by this research represent two key milestones. The Museum La Congiunta in Giornico, by Peter Märkli, was built in 1992 and quickly established itself as an architectural icon of German-Swiss reductionism. This paradigm of conceptual and constructive synthesis began to take shape in the 1930s under the banner of Konkrete Kunst (Concrete Art), led by Max Bill. The only genuinely Swiss artistic movement of the twentieth century, Konkrete Kunst was characterized by the artistic values of precision, rigor, rationalism and abstraction, sentiments that were very close to the German-Swiss tradition. Secondly, the project for the rehabilitation of Villa Garbald and the construction of the Roccolo Tower in Castasegna, conducted by Miller&Maranta in 2004, represented the consummation of the Analoge Architektur, which was the first truly Swiss architectural movement, spearheaded in the 1980s by Miroslav Sik. The Deutscher Tendenza is a little-known period of recent German-Swiss history, represented by the important figure of Peter Zumthor. The projects that Zumthor led between 1979 and 1985 are part of a period when Italian Neo-Rationalism exercised a profound influence on the architect, as illustrated by the Churwalden School, circa 1983. Recent German-Swiss architecture systematically explored the compositional systems of the artistic avant-garde and Modernism, beyond its specific formal aspects. The second phase of Zumthor's work, between 1985 and 1996, is characterized by the transfiguration of the free plane, neoplastic compositional system developed by De Stijl, a plane that thickened until it became the box articulating fluidity from the spatial sequence. Zumthor's formalism in this phase prioritizes the compositional scheme, consisting of a regular perimeter in which the boxes that -like Mondrian’s colored surfaces- arrange the space around it. Zumthor’s Masans Residence, circa 1993, is a canonical project of this compositional system, which culminates in the radial pattern of the Therme Vals, circa 1996. The poetic image became the appropriate language of thought for German-Swiss architecture, which invited a nonverbal reflection inspired by a few fundamental archetypes. The architects of Ticino sought, through the Italian Tendenza of the 1970s, an alternative to the unsustainable territorial model that was destroying their cultural landscape. Some of these architects began to teach during that decade at ETHZ, and naturally they transmitted their unease to their students. These architects also introduced Aldo Rossi, one of the leading representatives of the Tendenza, to the school. Rossi’s analogue method, based on the analytical psychology of Carl Jung, was a major influence on the ETHZ during the 1970s. Rossi’s theoretical grounding was very much in tune with Swiss intellectualism, and it did not take long for architects from ETHZ to realize that they should break away from the Italian context, developing their own method from 1985 on with the Analoge Architektur. The value of the pre-existing conformity of this emerging method, stemmed from its role in facilitating the cultural continuity of a community, which Miroslav Sik defined in his concept of Altneue (literally, Old-new). This fusion of old and new was the basis for the spontaneity with which settlements had historically grown. Sik considered that continuity depended on understanding the existing patterns and sustaining their relevance through the incorporation of contemporary strategies, which would renew their meaning without losing their essence. Zumthor’s Gugalun House in Versam, circa 1994, is a domestic-scale approach to this philosophy. Modern German-Swiss architecture often looks to its references in visual art for a way to explore areas that are normally inaccessible to the architectural discipline. Architectural thinking based on the poetic image is achieved through a building’s tectonics, which communicate the core idea of a project from start to finish. The understanding of construction as a medium introduces the key concept of the appearance in architecture, closely related to the idealistic philosophy of Friedrich Schiller. The appearance should express the conceptual meaning of the work, which German-Swiss architects call the idea, so that the building does not have value in and of itself, but only in terms of its appearance. The Oberrealta Chapel by Christian Kerez, circa 1993, can be considered a sculpture in the landscape, closer to the visual arts than to architecture. The tension that arises between the ideal figure and the piece subjected to a subtle deformation confers a dynamic character onto the composition, intensifying the perceptual effect, according to Rudolf Arnheim’s theory of visual thought. The deformation in the service of the psychology of perception is a phenomenon that characterizes recent German-Swiss architecture. Martin Steinmann introduced the Forme Forte (Strong Form) concept to describe the architectural object known internationally as the Swiss Box. This concept is characterized by a predilection for all things monolithic, unitary and archetypal. The most substantial condition of a Forme Forte, however, is the configuration of a structuring element in the environment. Both the morphological basis of a Forme Forte and its ability to frame the place, correspond to the concepts of archetype and monument put forward by Rossi’s theory. The present thesis explores the sense of deformation in recent German-Swiss production, based on the School of Paspels by Valerio Olgiati, circa 1998 and the Roccolo Tower in Villa Garbald, by Miller&Maranta, circa 1998. Gottfried Semper’s tectonic theory and Adolf Loos’s reason for form constitute the theoretical foundation that links the existential activity of dwelling to the materiality of recent German-Swiss architecture. Semper’s tectonic theory laid the foundation for subsequent revisions of the German-Swiss traditional building systems. This influence was the basis for the Swiss avant-garde of Neues Bauen, which developed a functional rationalism during the 1920s and 30s that served as a non-symbolic grammatical foundation for the transition from classical order to materiality as a compositional tool. During the second half of the twentieth century, this architectural grammar helped consolidate the concept of the material base of the form. The revision of the regionalist and rationalist tradition, carried out by the generation of German-Swiss architects of the 1950s and 60s, constituted a substantial linguistic investigation. Rudolph Olgiati is the key figure of this period. The research was codified in terms of structuralism in the 1970s in ETHZ and influenced by the presence of Roland Barthes as a visiting professor. This revision was the basis of the uniquely German-Swiss tectonic design still in use today, as specifically illustrated by the work of Burkhalter & Sumi in this thesis. Gion Caminada's work in Vrin between 1995 and 2002 offers an extensive study on the Strickbau, which implements variations on a traditional system again and again, illustrating the endless possibilities of a language that paradoxically seems limited by the available resources in a remote Alpine setting. Finally, Jürg Conzett is the engineer with whom most architects in the Grisons region have developed their projects. Trained under Zumthor for 8 years, and a regular collaborator of Caminada, among others, Conzett is the reference point linking engineering with architecture in this thesis, essential in the context of this research.

El nuevo escenario global y un modelo de negocio para la industria naval militar del 2025

Los retos y oportunidades a los que se enfrentan las organizaciones y administraciones de las primeras décadas del siglo XXI se caracterizan por una serie de fuerzas perturbadoras como la globalización, el avance de las tecnologías emergentes y el desequilibrio económico, que están actuando como impulsores de la transformación del mercado. La acción conjunta de estos factores está obligando a todas las empresas industriales a tener que trabajar con mayores y más exigentes niveles de productividad planteándose continuamente como mejorar y lograr satisfacer los requerimientos de los clientes. De esta situación surge la necesidad de volver a plantearse de nuevo ¿quién es el cliente?, ¿qué valora el cliente? y ¿cómo se pueden generan beneficios sostenibles? La aplicación de esta reflexión a la industria naval militar marca los objetivos a los que esta tesis doctoral busca dar respuesta. El primer objetivo, de carácter general, consiste en la definición de un modelo de negocio sostenible para la industria naval militar del 2025 que se adapte a los requisitos del cliente y al nuevo escenario político, económico, social, tecnológico y ambiental que rodea esta industria. El segundo objetivo, consecuencia del modelo general, trata de desarrollar una metodología para ejecutar programas de apoyo al ciclo de vida del “buque militar”. La investigación se estructura en cuatro partes: en la primera se justifica, por un lado, la necesidad del cambio de modelo y por otro se identifican los factores estructurantes para la definición del modelo. La segunda parte revisa la literatura existente sobre uno de los aspectos básicos para el nuevo modelo, el concepto Producto-Servicio. La tercera parte se centra totalmente en la industria naval militar estudiando los aspectos concretos del sector y, en base al trabajo de campo realizado, se identifican los puntos que más valoran las Marinas de Guerra y como estas gestionan al buque militar durante todo su ciclo de vida. Por último se presentan los principios del modelo propuesto y se desarrollan los pilares básicos para la ejecución de proyectos de Apoyo al Ciclo de Vida (ACV). Como resultado de la investigación, el modelo propuesto para la industria naval militar se fundamenta en once principios: 1. El buque militar (producto de alto valor añadido) debe ser diseñado y construido en un astillero del país que desarrolla el programa de defensa. 2. El diseño tiene que estar orientado al valor para el cliente, es decir, se tiene que diseñar el buque militar para que cumpla su misión, eficaz y eficientemente, durante toda su vida operativa, asegurando la seguridad del buque y de las personas y protegiendo el medio ambiente de acuerdo con las regulaciones vigentes. 3. La empresa debe suministrar soluciones integrales de apoyo al ciclo de vida al producto. 4. Desarrollar y mantener las capacidades de integración de sistemas complejos para todo el ciclo de vida del buque militar. 5. Incorporar las tecnologías digitales al producto, a los procesos, a las personas y al propio modelo de negocio. 6. Desarrollar planes de actuación con el cliente domestico a largo plazo. Estos planes tienen que estar basados en tres premisas: (i) deben incluir el ciclo de vida completo, desde la fase de investigación y desarrollo hasta la retirada del buque del servicio; (ii) la demanda debe ser sofisticada, es decir las exigencias del cliente, tanto desde la óptica de producto como de eficiencia, “tiran” del contratista y (iii) permitir el mantenimiento del nivel tecnológico y de las capacidades industriales de la compañía a futuro y posicionarla para que pueda competir en el mercado de exportación. 7. Impulsar el sector militar de exportación mediante una mayor actividad comercial a nivel internacional. 8. Fomentar la multilocalización ya que representa una oportunidad de crecimiento y favorece la exportación posibilitando el suministro de soluciones integrales en el país destino. 9. Reforzar la diplomacia institucional como palanca para la exportación. 10. Potenciar el liderazgo tecnológico tanto en producto como en procesos con políticas activas de I + D+ i. 11. Reforzar la capacidad de financiación con soluciones innovadoras. El segundo objetivo de esta tesis se centra en el desarrollo de soluciones integrales de Apoyo al Ciclo de Vida (ACV). La metodología planteada trata de minimizar la brecha entre capacidades y necesidades a lo largo de la vida operativa del barco. Es decir, el objetivo principal de los programas de ACV es que la unidad conserve durante toda su vida operativa, en términos relativos a las tecnologías existentes, las capacidades equivalentes a las que tendrá cuando entre en servicio. Los ejes de actuación para conseguir que un programa de Apoyo al Ciclo de Vida cumpla su objetivo son: el diseño orientado al valor, la ingeniería de Apoyo al Ciclo de Vida, los proyectos de refresco de tecnología, el mantenimiento Inteligente y los contratos basados en prestaciones. ABSTRACT On the first decades of the 21st century, organizations and administrations face challenges and come across opportunities threatened by a number of disruptive forces such as globalization, the ever-changing emerging technologies and the economic imbalances acting as drivers of the market transformation. This combination of factors is forcing all industrial companies to have more and higher demanding productivity levels, while bearing always in mind how to improve and meet the customer’s requirements. In this situation, we need to question ourselves again: Who is the customer? What does the customer value? And how can we deliver sustainable economic benefits? Considering this matter in a military naval industry framework sets the goals that this thesis intends to achieve. The first general goal is the definition of a new sustainable business model for the 2025 naval industry, adapted to the customer requirements and the new political, economic, social, technological and environmental scenario. And the second goal that arises as a consequence of the general model develops a methodology to implement “warship” through life support programs. The research is divided in four parts: the first one justifies, on the one hand, the need to change the existing model and, on the other, identifies the model structural factors. On the second part, current literature regarding one of the key issues on the new model (the Product-Service concept) is reviewed. Based on field research, the third part focuses entirely on military shipbuilding, analyzing specific key aspects of this field and identifying which of them are valued the most by Navies and how they manage through life cycles of warships. Finally, the foundation of the proposed model is presented and also the basic grounds for implementing a Through Life Support (TLS) program are developed. As a result of this research, the proposed model for the naval industry is based on eleven (11) key principles: 1. The warship (a high added value product) must be designed and built in a shipyard at the country developing the defense program. 2. Design must be customer value oriented, i.e.warship must be designed to effectively fulfill its mission throughout its operational life, ensuring safety at the ship and for the people and protecting the environment in accordance with current regulations. 3. The industry has to provide integrated Through Life Support solutions. 4. Develop and maintain integrated complex systems capabilities for the entire warship life cycle. 5. Introduce the product, processes, people and business model itself to digital technologies. 6. Develop long-term action plans with the domestic customer. These plans must be based on three premises: (i) the complete life cycle must be included, starting from the research and development stage throughout the ship’s disposal; (ii) customer demand has to be sophisticated, i.e. customer requirements, both from the efficiency and product perspective, "attract" the contractor and (iii) technological level and manufacturing capabilities of the company in the future must be maintained and a competitive position on the export market has to be achieved. 7. Promote the military exporting sector through increased international business. 8. Develop contractor multi-location as it entails an opportunity for growth and promote export opportunities providing integrated solutions in the customer's country. 9. Strengthen institutional diplomacy as a lever for export. 10. Promote technological leadership in both product and processes with active R & D & I policies (Research & Development & Innovation) 11. Strengthen financing capacity through innovative solutions. The second goal of this thesis is focused on developing integrated Through Life Support (TLS) solutions. The proposed methodology tries to minimize the gap between needs and capabilities through the ship operational life. It means, the main TLS program objective is to maintain the ship’s performance and capabilities during operational life, in relative terms to current technologies, equivalent to those the ship had when it entered service. The main actions to fulfill the TLS program objectives are: value-oriented design, TLS engineering, technology updating projects, intelligent maintenance and performance based contracts.

1950 En torno al Museo Louisiana 1970

La tesis “1950 En torno al Museo Louisiana 1970” analiza varias obras relacionadas con el espacio doméstico, que se realizaron entre 1950 y 1970 en Dinamarca, un periodo de esplendor de la Arquitectura Moderna. Tras el aislamiento y restricciones del conflicto bélico que asoló Europa, los jóvenes arquitectos daneses, estaban deseosos por experimentar nuevas ideas de procedencia internacional, favorecidos por diferentes circunstancias, encuentran el mejor campo de ensayo en el espacio doméstico. La mejor arquitectura doméstica en Dinamarca, de aquel periodo, debe entenderse como un sistema compuesto por diferentes autores, que tienen en común muchas más similitudes que diferencias, se complementan unos a otros. Para la comprensión y el entendimiento de ello se hace necesario el estudio de varias figuras y edificios, que completen este sistema cuya investigación está escasamente desarrollada. La tesis propone un viaje para conocer los nombres de algunos de sus protagonistas, que mostraron con su trabajo, que tradición y vanguardia no estarán reñidas. El objetivo es desvelar las claves de la Modernidad Danesa, reconocer, descubrir y recuperar el legado de algunos de sus protagonistas en el ámbito doméstico, cuya lección se considera de total actualidad. Una arquitectura que asume las aportaciones extranjeras con moderación y crítica, cuya íntima relación con la tradición arquitectónica y la artesanía propias, será una de sus notas especiales. Del estudio contrastado de varios proyectos y versiones, se obtienen valores comunes entre sus autores, al igual que se descubren sus afinidades o diferencias respecto a los mismos asuntos; que permitirán comprender sus actuaciones según las referencias e influencias, y definir las variables que configuran sus espacios arquitectónicos. La línea de conexión entre los edificios elegidos será su particular relación con la naturaleza y el lugar en que se integran. La fachada, lugar donde se negociará la relación entre el interior y el paisaje, será un elemento entendido de un modo diferente en cada uno de ellos, una relación que se extenderá en todas ellas, más allá de su perímetro. La investigación se ha estructurado en seis capítulos, que van precedidos de una Introducción. En el capítulo primero, se estudian y se señalan los antecedentes, las figuras y edificios más relevantes de la Tradición Danesa, para la comprensión y el esclarecimiento de algunas de las claves de su Modernidad en el campo de la Arquitectura, que se produce con una clara intención de encontrar su propia identidad y expresión. Esta Modernidad floreciente se caracteriza por la asimilación de otras culturas extranjeras desde la moderación, con un punto de vista crítico, y encuentra sus raíces ancladas a la tradición arquitectónica y la artesanía propia, que fragua en la aparición de un ideal común con enorme personalidad y que hoy se valora como una auténtica aportación de una cultura considerada entonces periférica. Se mostrará el debate y el camino seguido por las generaciones anteriores, a las obras análizadas. Las sensibilidades por lo vernáculo y lo clásico, que aparentemente son contradictorias, dominaran el debate con la misma veracidad y respetabilidad. La llamada tercera generación por Sigfried Giedion reanudará la práctica entre lo clásico y lo vernáculo, apoyados en el espíritu del trabajo artesanal y de la tradición, con el objetivo de conocer del acto arquitectónico su “la verdad” y “la esencia original”. El capítulo segundo, analiza la casa Varming, de 1953, situada en un área residencial de Gentofte, por Eva y Nils Koppel, que reinterpreta la visión de Asplund de un paisaje interior continuación del exterior, donde rompen la caja de ladrillo macizo convencional propia de los años 30. Es el ejemplo más poderoso de la unión de tradición e innovación en su obra residencial. Sus formas sobrias entre el Funcionalismo Danés y la Modernidad se singularizarán por su abstracción y volúmenes limpios que acentúan el efecto de su geometría, prismática y brutalista. El desplazamiento de los cuerpos que lo componen, unos sobre otros, generan un ritmo, que se producirá a otras escalas, ello unido a las variaciones de sus formas y a la elección de sus materiales, ladrillo y madera, le confieren a la casa un carácter orgánico. El edificio se ancla a la tierra resolviéndose en diferentes niveles tras el estudio del lugar y su topografía. El resultado es una versión construida del paisaje, en la cual el edificio da forma al lugar y ensalza la experiencia del escenario natural. La unidad de las estructuras primitivas, parece estar presente. Constituye un ejemplo de la “La idea de Promenade de Asplund”, el proyecto ofrece diferentes recorridos, permitiendo su propia vivencia de la casa, que ofrece la posibilidad vital de decidir. El capítulo tercero trata sobre el pabellón de invitados de Niels Bohr de 1957, situado un área boscosa, en Tisvilde Hegn, fue el primer edificio del arquitecto danés Vilhelm Wohlert. Arraigado a la Tradición Danesa, representa una renovación basada en la absorción de influencias extranjeras: la Arquitectura Americana y la Tradición Japonesa. La caja de madera, posada sobre un terreno horizontal, tiene el carácter sensible de un organismo vivo, siempre cambiante según las variaciones de luz del día o temperatura. Cuando se abre, crea una prolongación del espacio interior, que se extiende a la naturaleza circundante, y se expande hacia el espacio exterior, permitiendo su movilización. Se establece una arquitectura de flujos. Hay un interés por la materia, su textura y el efecto emocional que emana. Las proporciones y dimensiones del edificio están reguladas por un módulo, que se ajusta a la medida del hombre, destacando la gran unidad del edificio. La llave se su efecto estético está en su armonía y equilibrio, que transmiten serenidad y belleza. El encuentro con la naturaleza es la lección más básica del proyecto, donde un mundo de relaciones es amable al ser humano. El capítulo cuarto, analiza el proyecto del Museo Louisiana de 1958, en Humlebæk, primer proyecto de la pareja de arquitectos daneses Jørgen Bo y Vilhelm Wohlert. La experiencia en California de Wohlert donde será visitado por Bo, será trascendental para el desarrollo de Louisiana, donde la identidad Danesa se fusiona con la asimilación de otras culturas, la arquitectura de Frank Lloyd Wright, la del área de la Bahía y la Tradición Japonesa principalmente. La idea del proyecto es la de una obra de arte integral: arquitectura, arte y paisaje, coexistirían en un mismo lugar. Diferentes recursos realzarán su carácter residencial, como el uso de los materiales propios de un entorno doméstico, la realización a la escala del hombre, el modo de usar la iluminación. Cubiertas planas que muestran su artificialidad, parecen flotar sobre galerías acristaladas, acentuarán la fuerza del plano horizontal y establecerán un recorrido en zig-zag de marcado ritmo acompasado. Ritmo que tiene que ver con la encarnación del pulso de la naturaleza, que se acompaña de juegos de luz, y de otras vibraciones materiales a diferentes escalas, imagen, que encuentra una analogía semejante en la cultura japonesa. Todo se coordina con la trama estructural, que conlleva a una construcción y proporción disciplinada. Louisiana atiende al principio de crecimiento de la naturaleza, con la que su conexión es profunda. Hay un dinamismo expresado por el despliegue del edificio, que evoca a algunos proyectos de la Tradición Japonesa. Los blancos muros tienen su propia identidad como formas en sí mismas, avanzan prolongándose fuera de la línea del vidrio, se mueven libremente siguiendo el orden estructural, acompañando al espacio que fluye, en contacto directo con la naturaleza que está en un continuo estado de flujos. Se da todo un mundo de relaciones, donde existe un dialogo entre el paisaje, arte y arquitectura. El capítulo quinto, se dedica a analizar la segunda casa del arquitecto danés Halldor Gunnløgsson, de 1959. Evoca a la Arquitectura Japonesa y Americana, pero es principalmente resultado de una fuerte voluntad y disciplina artística personal. La cubierta, plana, suspendida sobre una gran plataforma pavimentada, que continúa la sección del terreno construyendo de lugar, tiene una gran presencia y arroja una profunda sombra bajo ella. En el interior un espacio único, que se puede dividir eventualmente, discurre en torno a un cuerpo central. El espacio libre fluye, extendiéndose a través de la transparencia de sus ventanales a dos espacios contrapuestos: un patio ajardinado íntimo, que inspira calma y sosiego; y la naturaleza salvaje del mar que proyecta el color del cielo, ambos en constante estado de cambio. El proyecto se elabora de un modo rigurosamente formal, existiendo al mismo tiempo un perfecto equilibrio entre la abstracción de su estructura y su programa. La estructura de madera cuyo orden se extiende más allá de los límites de su perímetro, está formada por pórticos completos como elementos libres, queda expuesta, guardando una estrecha relación con el concepto de modernidad de Mies, equivalente a la arquitectura clásica. La preocupación por el efecto estético es máxima, nada es improvisado. Pero además la combinación de materiales y el juego de las texturas hay una cualidad táctil, cierto erotismo, que flota alrededor de ella. La precisión constructiva y su refinamiento se acercan a Mies. La experiencia del espacio arquitectónico es una vivencia global. La influencia de la arquitectura japonesa, es más conceptual que formal, revelada en un respeto por la naturaleza, la búsqueda del refinamiento a través de la moderación, la eliminación de los objetos innecesarios que distraen de la experiencia del lugar y la preocupación por la luz y la sombra, donde se establece cierto paralelismo con el oscuro mundo del invierno nórdico. Hay un entendimiento de que el espacio, en lugar de ser un objeto inmaterial definido por superficies materiales se entiende como interacciones dinámicas. El capítulo sexto. Propone un viaje para conocer algunas de las viviendas unifamiliares más interesantes que se construyeron en el periodo, que forman parte del sistema investigado. Del estudio comparado y orientado en varios temas, se obtienen diversa conclusiones propias del sistema estudiado. La maestría de la sustancia y la forma será una característica distintiva en Dinamarca, se demuestra que hay un acercamiento a la cultura de Oriente, conceptual y formal, y unos intereses comunes con cierta arquitectura Americana. Su lección nos sensibiliza hacia un sentido fortalecido de proporción, escala, materialidad, textura y peso, densidad del espacio, se valora lo táctil y lo visual, hay una sensibilidad hacia la naturaleza, hacia lo humano, hacia el paisaje, la integridad de la obra. ABSTRACT The thesis “1950 around the Louisiana Museum 1970” analyses several works related to domestic space, which were carried out between 1950 and 1970 in Denmark, a golden age of modern architecture. After the isolation and limitations brought about by the war that blighted Europe, young Danish architects were keen to experiment with ideas of an international origin, encouraged by different circumstances. They find the best field of rehearsal to be the domestic space. The best architecture of that period in Denmark should be understood as a system composed of different authors, who have in common with each other many more similarities than differences, thus complimenting each other. In the interests of understanding, the study of a range of figures and buildings is necessary so that this system, the research of which is still in its infancy, can be completed. The thesis proposes a journey of discovery through the names of some of those protagonists who were showcased through their work so that tradition and avant- garde could go hand in hand. The objective is to unveil the keys to Danish Modernity; to recognise, discover and revive the legacy of some of its protagonists in the domestic field whose lessons are seen as entirely of the present. For an architect, the taking on of modern contributions with both moderation and caution, with its intimate relationship with architectural tradition and its own craft, will be one of his hallmarks. With the study set against several projects and versions, one can derive common values among their authors. In the same way their affinities and differences in respect of the same issue emerge. This will allow an understanding of their measures in line with references and influences and enable the defining of the variables of their architectural spaces. The common line between the buildings selected will be their particular relationship with nature and the space with which they integrate. The façade, the place where the relationship between the interior and the landscape would be negotiated, wouldl be the discriminating element in a distinct way for each one of them. It is through each of these facades that this relationship would extend, and far beyond their physical perimeter. The investigation has been structured into six chapters, preceded by an introduction. The first chapter outlines and analyses the backgrounds, figures and buildings most relevant to the Danish Tradition. This is to facilitate the understanding and elucidation of some of the keys to its modernity in the field of architecture, which came about with the clear intention to discover its own identity and expression. This thriving modernity is characterized by its moderate assimilation with foreign cultures with a critical eye, and finds its roots anchored in architectural tradition and its own handcraft. It is forged in the emergence of a common ideal of enormous personality which today has come to be valued as an authentic contribution to the sphere from a culture that was formerly seen as on the peripheries. What will be demonstrated is the path taken by previous generations to these works and the debate that surrounds them. The sensibilities for both the vernacular and the classic, which at first glance may seem contradictory, will dominate the debate with the same veracity and respectability. The so-called third generation of Sigfried Giedion will revive the process between the classic and the vernacular, supported in spirit by the handcraft work and by tradition, with the objective of discovering the “truth” and the “original essence” of the architectural act. The second chapter analyzes the Varming house, built by Eva and Nils Koppel 1953, which is situated in a residential area of Gentofte. This reinterprets Asplund’s vision of an interior landscape extending to the exterior, where we see a break with the conventional sturdy brick shell of the 1930s. It is the most powerful example of the union of tradition and innovation in his their residential work. Their sober forms caught between Danish Functionalism and modernity are characterized by their abstraction and clean shapes which accentuate their prismatic and brutal geometry, The displacement of the parts of which they are composed, one over the other, generate a rhythm. This is produced to varying scales and is closely linked to its forms and the selection of materials – brick and wood – that confer an organic character to the house. The building is anchored to the earth, finding solution at different levels through the study of place and topography. The result is an adaption constructed out of the landscape, in which the building gives form to the place and celebrates the experience of the natural setting. The unity of primitive structures appears to be present. It constitutes an example of “Asplund’s Promenade Idea”. Different routes of exploration within are available to the visitor, allowing for one’s own personal experience of the house, allowing in turn for the vital chance to decide. The third chapter deals with Niels Bohr’s guest pavilion. Built in 1957, it is situated in a wooded area of Tisvilde Hegn and was the architect Vilhelm Wohlert’s first building. Rooted in the Danish Tradition, it represents a renewal based on the absorption of foreign influences: American architecture and the Japanese tradition. The wooden box, perched atop a horizontal terrain, possesses the sensitive character of the living organism, ever-changing in accordance with the variations in daylight and temperature. When opened up, it creates an elongation of the interior space which extends into the surrounding nature and it expands towards the exterior space, allowing for its mobilisation. It establishes an architecture of flux. There is interest in the material, its texture and the emotional effect it inspires. The building’s proportions and dimensions are regulated by a module, which is adjusted by hand, bringing out the great unity of the building. The key to its aesthetic effect is its harmony and equilibrium, which convey serenity and beauty. The meeting with nature is the most fundamental lesson of the project, where a world of relationships softens the personality of the human being. The fourth chapter analyzes the Louisiana Museum project of 1958 in 1958. It was the first project of the Danish architects Jørgen Bo and Vilhelm Wohlert. Wohlert’s experience in California where he was visited by Bo would be essential to the development of Louisiana, where the Danish identity is fused in assimilation with other cultures, the architecture of Frank Lloyd Wright, that of the Bahía area and principally the Japanese tradition. The idea of the project was for an integrated work of art: architecture, art and landscape, which would coexist in the same space. A range of different resources would realize the residential character, such as the use of materials taken from a domestic environment, the attainment of human scale and the manner in which light was used. Flat roof plans that show their artificiality and appear to float over glassed galleries. They accentuate the strength of the horizontal plan and establish a zigzag route of marked and measured rhythm. It is a rhythm that has to do with the incarnation of nature’s pulse, which is accompanied with plays of light, as well as material vibrations of different scales, imagery which uncovers a parallel analogy with Japanese culture. Everything is coordinated along a structural frame, which involves a disciplined construction and proportion. Louisiana cherishes nature’s principle of growth, to which its connection is profound. Here is a dynamism expressed through the disposition of the building, which evokes in some projects the Japanese tradition. The white walls possess their own identity as forms in their own right. They advance, extending beyond the line of glass, moving freely along the structural line, accompanying a space that flows and in direct contact with nature that is itself in a constant state of flux. It creates a world of relationships, where dialogue exists between the landscape, art and architecture. The fifth chapter is dedicated to analyzing the Danish architect Halldor Gunnløgsson’s second house, built in 1959. It evokes both Japanese and American architecture but is principally the result of a strong will and personal artistic discipline. The flat roof suspended above a large paved platform – itself continuing the constructed terrain of the place – has great presence and casts a heavy shadow beneath. In the interior, a single space, which can at length be divided and which flows around a central space. The space flows freely, extending through the transparency of its windows which give out onto two contrasting locations: an intimate garden patio, inspiring calm and tranquillity, and the wild nature of the sea which projects the colour of sky, both in a constant state of change. The project is realized in a rigorously formal manner. A perfect balance exists between the abstraction of his structure and his project. The wooden structure, whose order extends beyond the limits of its perimeter, is formed of complete porticos of free elements. It remains exposed, maintaining a close relationship with Mies’ concept of modernity, analogous to classical architecture. The preoccupation with the aesthetic effect is paramount and nothing is improvised. But in addition to this - the combination of materials and the play of textures - there is a tactile quality, a certain eroticism, which lingers all about. The constructive precision and its refinement are close to Mies. The experience of the architectural space is universal. The influence of Japanese architecture, more conceptual than formal, is revealed in a respect for nature. It can be seen in the search for refinement through moderation, the elimination of the superfluous object that distract from the experience of place and the preoccupation with light and shade, where a certain parallel with the dark world of the Nordic winter is established. There is an understanding that space, rather than being an immaterial object defined by material surfaces, extends instead as dynamic interactions. The sixth chapter. This proposes a journey to discover some of the unfamiliar residences of most interest which were constructed in the period, and which form part of the system being investigated. Through the study of comparison and one which is geared towards various themes, diverse conclusions are drawn regarding the system being researched. The expertise in substance and form will be a distinctive characteristic in Denmark, demonstrating an approach to the culture of the Orient, both conceptual and formal, and some common interests in certain American architecture. Its teachings sensitize us to a strengthened sense of proportion, scale, materiality, texture and weight and density of space. It values both the tactile and the visual. There is a sensitivity to nature, to the human, to the landscape and to the integrity of the work.

Trans arquitectura : imaginación, invención e individuación del objeto técnico arquitectónico : transferencia tecnológica desde la industria del transporte al proyecto arquitectónico (1900-1973)

Se presenta la tesis doctoral, titulada ‘TRANS Arquitectura. Imaginación, Invención e individuación del objeto tecnico arquitectónico. Transferencia tecnológica desde la Industria del Transporte al Proyecto de Arquitectura [1900-1973]'’, que aborda la relación entre la Arquitectura y el Objeto Técnico durante la Modernidad.1 La temática de la tesis gravita en torno a la cultura técnica, la cultura material y la historia de la Tecnología del siglo XX. Hipótesis Se sostiene aquí la existencia de unas arquitecturas que se definen como Objetos Técnicos. Para demostrarlo se estudia si éstas comparten las mismas propiedades ontológicas de los objetos técnicos. Industria y Arquitectura La historia de la Arquitectura Moderna es la historia de la Industria Moderna y sus instalaciones industriales, sus productos y artefactos o sus procedimientos y procesos productivos. Fábricas, talleres, acerías, astilleros, minas, refinerías, laboratorios, automóviles, veleros, aviones, dirigibles, transbordadores, estaciones espaciales, electrodomésticos, ordenadores personales, teléfonos móviles, motores, baterías, turbinas, aparejos, cascos, chassis, carrocerías, fuselajes, composites, materiales sintéticos, la cadena de montaje, la fabricación modular, la cadena de suministros, la ingeniería de procesos, la obsolescencia programada… Todos estos objetos técnicos evolucionan constantemente gracias al inconformismo de la imaginación humana, y como intermediarios que son, cambian nuestra manera de relacionarnos con el mundo. La Arquitectura, al igual que otros objetos técnicos, media entre el hombre y el mundo. Con el objetivo de reducir el ámbito tan vasto de la investigación, éste se ha filtrado a partir de varios parámetros y cualidades de la Industria, estableciendo un marco temporal, vinculado con un determinado modo de hacer, basado en la ciencia. El inicio del desarrollo industrial basado en el conocimiento científico se da desde la Segunda Revolución Industrial, por consenso en el último tercio del siglo XIX. Este marco centra el foco de la tesis en el proceso de industrialización experimentado por la Arquitectura desde entonces, y durante aproximadamente un siglo, recorriendo la Modernidad durante los 75 primeros años del siglo XX. Durante este tiempo, los arquitectos han realizado transferencias de imágenes, técnicas, procesos y materiales desde la Industria, que ha servido como fuente de conocimiento para la Arquitectura, y ha evolucionado como disciplina. Para poder abordar más razonablemente un periodo tan amplio, se ha elegido el sector industrial del transporte, que históricamente ha sido, no sólo fuente de inspiración para los Arquitectos, sino también fuente de transferencia tecnológica para la Arquitectura. Conjuntos técnicos como los astilleros, fábricas de automóviles o hangares de aviones, individuos técnicos como barcos, coches o aviones, y elementos técnicos como las estructuras que les dan forma y soporte, son todos ellos objetos técnicos que comparten propiedades con las arquitecturas que aquí se presentan. La puesta en marcha de la cadena móvil de montaje en 1913, se toma instrumentalmente como primer foco temporal desde el que relatar la evolución de numerosos objetos técnicos en la Primera Era de la Máquina; un segundo foco se sitúa en 19582, año de la creación de la Agencia Espacial norteamericana (NASA), que sirve de referencia para situar la Segunda Era de la Máquina. La mayoría de los objetos técnicos arquitectónicos utilizados para probar la hipótesis planteada, gravitan en torno a estas fechas, con un rango de más menos 25 años, con una clara intención de sincronizar el tiempo de la acción y el tiempo del pensamiento. Arquitectura y objeto técnico Los objetos técnicos han estado siempre relacionados con la Arquitectura. En el pasado, el mismo técnico que proyectaba y supervisaba una estructura, se ocupaba de inventar los ingenios y máquinas para llevarlas a cabo. Los maestros de obra, eran verdaderos ‘agentes de transferencia tecnológica’ de la Industria y su conocimiento relacionaba técnicas de fabricación de diferentes objetos técnicos. Brunelleschi inventó varia grúas para construir la cúpula de Santa Maria dei Fiori (ca.1461), seguramente inspirado por la reedición del tratado de Vitruvio, De Architectura (15 A.C.), cuyo último capítulo estaba dedicado a las máquinas de la arquitectura clásica romana, y citaba a inventores como Archimedes. El arquitecto florentino fue el primero en patentar un invento en 1421: una embarcación anfibia que serviría para transportar mármol de Carrara por el río Arno, para su obra en Florencia. J. Paxton. Crystal Palace. London 1851. Viga-columna. Robert McCormick. Cosechadora 1831. 2ª patente, 1845. La Segunda Revolución Industrial nos dejó un primitivo ejemplo moderno de la relación entre la Arquitectura y el objeto técnico. El mayor edificio industrializado hasta la fecha, el Crystal Palace de Londres, obra de Joseph Paxton, fue montado en Londres con motivo de la Gran Exposición sobre la Industria Mundial de 1851, y siempre estará asociado a la cosechadora McCormick, merecedora del Gran Premio del Jurado. De ambos objetos técnicos, podrían destacarse características similares, como su origen industrial, y ser el complejo resultado de un ensamblaje simple de elementos técnicos. Desde la entonces, el desarrollo tecnológico ha experimentado una aceleración continuada, dando lugar a una creciente especialización y separación del conocimiento sobre las técnicas antes naturalmente unidas. Este proceso se ha dado a expensas del conocimiento integrador y en detrimento de la promiscuidad entre la Industria y la Arquitectura. Este es, sin lugar a dudas, un signo consustancial a nuestro tiempo, que provoca un natural interés de los arquitectos y otros tecnólogos, por las transferencias, trans e inter-disciplinareidades que tratan de re-establecer los canales de relación entre los diferentes campos del conocimiento. La emergencia de objetos técnicos como los vehículos modernos a principios del siglo XX (el automóvil, el trasatlántico, el dirigible o el aeroplano) está relacionada directamente con la Arquitectura de la Primera Era de la Máquina. La fascinación de los arquitectos modernos por aquellas nuevas estructuras habitables, se ha mantenido durante más de un siglo, con diferente intensidad y prestando atención a unos objetos técnicos u otros, oscilando entre el dominio del valor simbólico de los vehículos como objetosimágenes, durante el periodo heroico de la Primera Era de la Máquina, y la mirada más inquisitiva durante la Segunda, que perseguía un conocimiento más profundo de la organización de los mismos y del sistema técnico en el que estaban incluidos. La relación homóloga que existe entre arquitecturas y vehículos, por su condición de estructuras habitables, es algo de sobra conocido desde que Le Corbusier utilizara aquellas imágenes de barcos, coches y aviones para ilustrar su manifiesto Vers une architecture, de 1923. Los vehículos modernos han sido los medios con los que transmitir los conceptos que ansiaban transformar las propiedades tradicionales de la Arquitectura, relativas a su factura, su habitabilidad, su duración, su funcionalidad o su estética. Destaca particularmente el caso del automóvil en las décadas de los años 30 y 50, y los vehículos del programa espacial en las décadas de los 60 y 70. El conocimiento y la documentación previa de estos hechos, fueron un buen indicio para identificar y confirmar que el sector industrial del transporte, era un especialmente trascendente y fértil proveedor de casos de transferencia tecnológica para la Arquitectura. La tradición Moderna inaugurada por Le Corbusier en los años 20, ha sido mantenida y defendida por una multitud de arquitectos modernos como Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames o Craig Ellwood, cuyo trabajo, animado por el legado de anteriores tecnólogos como Bucky Fuller o Jean Prouvé, fue fundamental y referencia obligada para la siguiente generación de arquitectos como Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean Kaplicky o Richard Horden, entre otros. Todos ellos han contribuido a engrosar el imaginario del objeto técnico, aportando sus obras arquitectónicas. Estos arquitectos que aparecen repetidamente en el discurrir de la tesis, pertenecen a un mismo linaje, y son agrupados según una estructura ‘genealógica’, que se ha denominado ‘Estirpe Técnica’. Unidos por intereses comunes y similares enfoques o actitudes ante el proyecto de arquitectura, entendida como objeto Técnico, han operado mediante la práctica de la transferencia tecnológica, sin limitarse a las técnicas compositivas propias de la disciplina arquitectónica. Durante la investigación, se ha recopilado una selección de menciones explícitas -hechas por arquitectos- sobre otros objetos técnicos para referirse a la Arquitectura, mostrando las constantes y las variaciones de sus intereses a lo largo del siglo, lo que nos ha llevado a conclusiones como por ejemplo, que los conjuntos técnicos (fábricas de zepelines, aviones, automóviles o trasatlánticos) eran tomados por los arquitectos de la primera Modernidad, como un modelo imaginario, formal y compositivo, mientras que los de la Segunda Era de la Máquina los tomaban como modelo espacial y organizativo para la arquitectura. La mencionada estirpe de tecnólogos incluye líneas de descendencia conocidas, como: EiffelSuchovBehrens GropiusMiesLeCorbusierLodsProuve, en la Europa continental, o una rama británica como: LoudonPaxtonWilliamsStirlingGowan SmithsonsPriceArchigramFosterRogersPiano KaplickyHorden. También podemos encontrar conexiones intercontinentales como Fuller EamesRudolphFosterRogers, o ramificaciones menos previsibles como: LeRicolaisKahn PianoKaplicky, o LeCorbusierFreyLacaton Vassal… Seguramente muchos más merecerían incluirse en esta lista, y de hecho, la tesis asume la imposibilidad de incluirlo todo (por motivos prácticos) aunque contempla la posibilidad de ser ampliada en un futuro. Con lo aquí incluido, se pretende mostrar la continuidad en los enfoques, planteamientos y técnicas de proyectos aplicadas, de los que podemos deducir algunas conclusiones, como por ejemplo, que en los periodos inmediatamente posteriores a las dos Guerras Mundiales, aumentó la intensidad de aportaciones de nuevas imágenes de vehículos, al imaginario del objeto técnico utilizado por los arquitectos, a través de publicaciones y exposiciones. Hoy, cien años después de que Ford pusiera en marcha la cadena móvil de montaje, aún encontramos viva esta tradición en las palabras de un arquitecto, Richard Horden, cuyo trabajo porta consigo –como la información embebida en los elementos técnicos- toda una cultura técnica de una tradición moderna. Horden representa uno de los exponentes de la que he denominado estirpe de tecnólogos. Es por ello que he querido concluir la tesis con una entrevista, realizada en Mayo de 2015, en su estudio de Berkeley Square en Londres (ver Apéndices). Guías Para el desarrollo de la presente tesis, se ha tomado, como principal obra de referencia, otra tesis, titulada El modo de existencia de los objetos técnicos, leída y publicada en 1958 por el filósofo francés Gilbert Simondon [1924-89], dedicada a la ontología del objeto técnico. Esta obra enmarca el enfoque intelectual de la tesis, que entronca con la fenomenología, para movilizar una visión particular de la Arquitectura, a la que sirve como modelo de análisis ontológico para estudiar sus procesos de génesis, invención e individuación. Para el desarrollo de éstos, se ha utilizado como complemento bibliográfico, otra obra del mismo autor, titulada Imaginación e invención 1965-66. En cuanto a las fuentes historiográficas disciplinares, se ha elegido utilizar a Reyner P. Banham [1922-1988] y a Martin E. Pawley [1938-2008] como guías a través de la arquitectura del siglo XX. Sus crónicas sobre la Primera y Segunda Era de la Máquina3 y su obra crítica, han servido como índices desde los que reconstruir el imaginario del objeto técnico moderno, y del que aprovisionarse de proyectos y obras de Arquitectura como casos de estudio para la tesis. Estas obras han servido además como índices de otra bibliografía, que ha sido complementaria a la de éstos. Objetivos de la Tesis El principal objetivo de la tesis es demostrar la hipótesis: si una obra de arquitectura puede ser considerada un objeto técnico y bajo qué condiciones, construyendo un criterio que permita reconocer cuándo una obra de Arquitectura responde a la definición de objeto técnico. Otro objetivo es demostrar la importancia y potencia de la Transferencia tecnológica en el proceso evolutivo de la Arquitectura, y para ello se presentan ejemplos de una metodología de proyecto por ensamblaje, que Martin Pawley denominaba ‘Design by Assembly’. También es un objetivo el de reconstruir un Atlas del Imaginario del objeto técnico moderno, con el fin de conocer mejor las causas, razones y finalidades que llevaron a los arquitectos modernos a perseguir una arquitectura como objeto técnico. Este Atlas permite relacionar panópticamente los distintos objetos técnicos entre sí, revelando la verdadera importancia y trascendencia de aquéllos y las arquitecturas con las que se relacionan. En él, las arquitecturas vuelven a situarse en el contexto más extenso y complejo de la industria y la historia de la tecnología, al que siempre pertenecieron. De este modo, éstas son capaces de desvelar todo el conocimiento -en forma de información- que portan en su propio código ‘genético’, desplegando capítulos completos de cultura tecnológica, tan antigua como la Humanidad y en constante y creciente evolución. Estructura de la tesis Tras una Introducción en la que se presentan algunos de los conceptos principales que se instrumentalizan en la tesis sobre la ontología Simondoniana del objeto técnico y sobre la transferencia tecnológica aplicada al proyecto de Arquitectura, el texto principal de la tesis consta de tres partes: La primera se dedica a la Imaginación, una segunda parte a la Invención y una tercera a Individuación o evolución del objeto técnico. Se termina con una Discusión de la tesis y un apartado de Conclusiones. En la Introducción al objeto técnico, éste se define ontológicamente y se distinguen sus diferentes categorías (conjuntos técnicos, individuos técnicos y elementos técnicos). Se explica el proceso de génesis del objeto técnico y sus fases de imaginación, invención e individuación. También se presentan los conceptos de transducción, tecnicidad y sistema técnico, fundamentales para entender el concepto de transferencia tecnológica que se desarrollará después. La concretización, explica el modo particular de individuación y evolución de los objetos técnicos, un proceso por el que las diferentes partes de un objeto técnico, se integran y tienden hacia la propia convergencia. Aquí se comprueba la efectividad del concepto simondoniano de Transducción, como señal o información transmitida y transformada, y se relaciona con la Transferencia Tecnológica - un proceso sinergético, por el que un sector industrial se beneficia del desarrollo de otro sector- a la que se han referido explícitamente arquitectos e historiadores para explicar sus obras, durante la Segunda Era de la Máquina, y que es determinante para el desarrollo de la Industria. La transferencia tecnológica sería la transmisión del conjunto de conocimientos sobre la técnica, que incluyen su esfera fáctica, pero también la esfera sensible de la experiencia. En su aplicación a la arquitectura, las transferencias se han clasificado según tres tipos: Eidéticas, Tectónicas, Orgánicas. En la primera parte dedicada a la Imaginación del objeto técnico arquitectónico se realiza una reconstrucción ‘arqueológica’ –y parcial- del imaginario del objeto técnico moderno, con la intención de conocer mejor su génesis y la relación con otros objetos técnicos. Las fuentes de ese imaginario se buscan en las instalaciones de la Industria de principios de siglo XX, en particular en las fábricas de vehículos, con la finalidad de comprobar hasta qué punto, esos objetos técnicos fueron importantes para imaginar la Arquitectura moderna. La reconstrucción se continúa hasta la Segunda Era de la Máquina, cuando una nueva mirada más inquisitiva y precisa, se dirige a otras fábricas, vehículos y componentes, interesándose por sus cualidades materiales y organizativas. Transferencias Eidéticas, que operan desde un conocimiento intuitivo y son útiles para transmitir información sobre la esencia de un objeto técnico que sirve de fuente. Conceptos abstractos se transmiten por medio de las imágenes—objeto, para producir una transformación en su equivalente arquitectónico. Fruto de la investigación, se han detectado un grupo de conceptos que han sido objeto de transferencias tecnológicas de naturaleza eidética, provenientes del imaginario del objeto técnico moderno: FABRICADO, HABITABLE, FUNCIONAL, EFICIENTE, OBSOLESCENTE y BELLO. En la segunda parte dedicada a la Invención del objeto técnico arquitectónico, las transferencias también pueden ser Tectónicas, cuando lo que se transmite es una técnica constructiva o estructural aplicada mediante MATERIALES artificiales (como los metales, los composites como el ferrocemento, y el plywood, o las aleaciones como el aluminio) o mediante el ensamblaje de ESTRUCTURAS o partes componentes de otro objeto técnico, (como cascos, fuselajes, carrocerías o aparejos) y tiene como resultado la invención de un nuevo objeto técnico arquitectónico. En la tercera parte dedicada a la individuación, se abordan las transferencias ORGÁNICAS, lo que se transfiere es una técnica organizativa, aplicada a través de PROCEDIMIENTOS que definen la actividad del arquitecto como tecnólogo e inventor de objetos técnicos. Estos procedimientos tienen un efecto transformador en tres instituciones tradicionales para la Arquitectura: la Escuela, el Estudio y la Obra, y sus resultados se resumen en nuevos modelos de organización de la Educación de la Arquitectura, con la aparición de los Talleres de proyectos; nuevos modelos de organización del ejercicio de arquitecto: la Oficina técnica; nuevos modelos de organización del espacio, basados en la organización espacial de la Industria, que da lugar a patrones o Matrices espaciales; un nuevo modelo de organización del proyecto, que utiliza las herramientas gráficas de la industria y el ensamblaje como metodología; y un nuevo modelo de producción arquitectónica, basado en la Industrialización. Tras explicar los conceptos y la génesis del ensamblaje y el montaje, se presenta el proyecto por ensamblaje (Design by assembly) como un método que promueve la invención arquitectónica. Se demuestra utilizando algunos casos analizados en la tesis, en los que se ha realizado alguna transferencia conceptual, constructiva u organizativa. Tras analizar las arquitecturas estudiadas en la tesis, se ha utilizado el método genético propuesto por Simondon para comprender cada evolución particular, reconstruyendo las líneas genealógicas hasta sus ancestros, e identificando una serie de linajes genéticos, que corresponderían con los conjuntos técnicos estudiados en la tesis: el astillero, la fábrica de coches, y la fábrica de aeronaves: los Ancestros de la Modernidad. Los sistemas de organización espacial de estos conjuntos técnicos, están directamente relacionados con el objeto técnico que se produce en él. A partir de ellos se definen una serie de matrices operativas (MILL, SHOP, SHED), que sirven para hacer una taxonomía del objeto técnico arquitectónico. Esto se ejemplifica con algunos proyectos de Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean Kaplicky y Richard Horden. Tesis: Comprobación de la hipótesis Simondon definía ontológicamente el Objeto técnico como aquello de lo que existe génesis y que desarrolla una tendencia hacia la solidaridad y unidad. Para que una Arquitectura pueda ser reconocida como un Objeto técnico, se deben dar una serie de condiciones, en las sucesivas fases que intervienen en su modo de existencia: Imaginación. Estas arquitecturas remiten a un imaginario protagonizado por imágenes-objeto de otros objetos técnicos (conjuntos técnicos, individuos técnicos y elementos técnicos). Esas imágenes-objeto vehiculizan una transferencia eidética de los objetos técnicos que simbolizan. Invención. Estas arquitecturas son el resultado de transferencias tectónicas, que se producen durante el proceso de proyecto, mediante el ensamblaje de materiales, componentes o procedimientos, utilizados en la industria para la producción de otros objetos técnicos. Individuación. Estas arquitecturas evolucionan y se individualizan por concretización, un proceso por el que los objetos técnicos se organizan para seguir su tendencia hacia la integración de sus partes, con el fin de alcanzar la convergencia de funciones en una única estructura. Esta integración tiende hacia la naturalización del objeto técnico, mediante la inclusión simbiótica de sus medios naturales asociados. En este caso, veremos cómo se ha producido transferencias orgánicas, o lo que es lo mismo, cómo los objetos técnicos –en el nivel de los conjuntos técnicos- se han tomado como modelo de organización por la arquitectura. Tras comprobar que de ellas existe una génesis, que evoluciona por las fases de imaginación e invención y concretización, se analiza su imaginario, su materialidad, sus estructuras y su organización, con el fin de detectar patrones y principios organizativos comunes a otros objetos técnicos. Interés de la tesis Desde el comienzo del nuevo siglo, diversos autores han demostrado un renovado interés por definir qué es el proyecto, qué lo constituye para qué sirve. Las aproximaciones al tema provienen de la filosofía analítica (Galle, 2008) o de la filosofía de la tecnología (Verbeek, 2005; Vermaas, 2009) y a menudo versan sobre la relación entre diseño y la cultura material (Dorschel 2003, Boradkar 2010 o Preston 2012). Es importante indicar el reciente y también creciente interés suscitado por la obra del filósofo francés, Gilbert Simondon [1924-1989], reconocida por su importante contribución a la filosofía de la técnica y la fenomenología, y por la influencia en el pensamiento de filósofos como Gilles Deleuze, autor presente en multitud de tesis doctorales e investigaciones teóricas llevadas a cabo en las principales escuelas de Arquitectura de todo el mundo desde los años 90 hasta el presente. La reedición y traducción de la obra de Simondon (ing. 1980, esp. 2008) ha recibido la atención de filósofos actuales como Paolo Virno, Bruno Latour o Bernard Stiegler, que siguen recurriendo a su estudio y análisis para avanzar en su pensamiento, estando por tanto presente en el debate contemporáneo sobre la técnica. Tras su reciente traducción al español, el pensamiento de Simondon ha despertado un gran interés en América Latina, como demuestra la organización de varios congresos y simposios, así como la proliferación de publicaciones en torno a su obra y pensamiento. Las futuras traducciones del resto de sus principales obras, asegurarán una introducción cada vez mayor en la comunidad académica. Se ha procurado presentar una mirada alternativa de la Historia de la Arquitectura Moderna, utilizando como guía a un cronista como Reyner Banham. La Era de la Máquina se ha cruzado con la Mecanología y el “vitalismo técnico” de Simondon, obteniendo como resultado una interpretación fresca, renovada y optimista de algunas de las más importantes obras de Arquitectura del siglo XX, que seguro contribuirán al desarrollo de la del siglo XXI, inmerso ya en el cambio de paradigma hacia la sostenibilidad y la ecología. ABSTRACT 'TRANS architecture. Imagination, invention and technical individuation of the architectural technical object. Technology transfer from the Transport Industry to Architectural Design [1900- 1973]' is a thesis dealing with the relationship between Architecture and the Technical Object during Modernity5. The theme of the thesis revolves around the technical culture, material culture and the history of twentieth-century technology. Hypothesis Held here is the existence of some architectures defined as technical objects. A study has been developed to prove if those architectures share the ontological properties of a technical object. Industry and Architecture The history of Modern Architecture is also the history of modern industry and its facilities, its products and devices, its procedures and production processes. Factories, workshops, steel mills, shipyards, mines, refineries, laboratories, cars, yachts, airplanes, airships, shuttles, space stations, home appliances, personal computers, mobile phones, motors, batteries, turbines, rigs, hulls, chassis, bodies, fuselages , composites and synthetic materials, the assembly line, modular manufacturing, the supply chain, process engineering, the planned obsolescence ... All these technical objects are constantly evolving thanks to the inconsistency of the human imagination and, as our intermediates, keep changing our way of relating and being in the world. Architecture, alike other technical objects, mediates between man and the World. In order to frame the vast field of the research, it has been filtered according to various parameters and qualities of Industry, establishing also a time frame which is related to a particular science-based way of making. The start of an industrial development, based on scientific knowledge is given from the Second Industrial Revolution -by consensus on the last third of the nineteenth century. This frame puts the focus of the thesis in the process of industrialization experienced by the Architecture of at least one century, and tours through Modernity during the first 75 years of the twenieth century. During this time, architects have made transfers of images, techniques, processes and materials from Industry, serving as a source of knowledge and thus allowing Architecture to evolve as a discipline. To reasonably address the enormous scope of the thesis, the industrial sector of transportation has ben chosen. It is not only a historical source of inspiration for architects, but also a traditional source of technology transfer for Modern Architecture. Technical sets such as shipyards, automobile factories or aircraft hangars, technical individuals as boats, cars or planes, and technical elements like the structures shaping and supporting them, are all technical objects which share properties with the architectures here presented. The launch of the moving assembly line in 1913, is instrumentally taken as a first time focus, from which to describe the evolution of many technical objects in the First Machine Age; a second focus could be found in 19586, year of the creation of the North American Space Agency (NASA), serving as a reference to the Second Machine Age. Most architectural technical objects used to test the hypothesis, gravitate around this second focus, in a range of plus or minus 25 years, with a clear intention to synchronize the time for action and time of thought. Architecture and Technical Object Technical objects have always been related to Architecture. In the past, the same technician who planned and oversaw a building structure, invented the devices and machines to carry them out. The foremen were the true 'technology transfer agents' from Industry. Their knowledge naturally related different manufacturing techniques to make diverse technical objects. Brunelleschi invented various cranes to build the dome of Santa Maria dei Fiori in Florence (ca.1461). Probably inspired by the reedition of Vitruvius’ treaty De Architectura (15 BC), whose last chapter was dedicated to the machines of classical Roman architecture and quoted inventors as Archimedes, the florentine architect was the first to patent an invention in 1421: an amphibious craft serving as a means of transportation for Carrara marble along the Arno river. At the daw of the Second Industrial Revolution, whose development was based on the scientific knowledge, we find a primitive modern example of the relationship between Architecture and a Technical Object: The Crystal Palace, built in London for the Great Exhibition of 1851 World Industry and designed by Joseph Paxton, was the largest to date industrialized building, and it will be always associated with the McCormick Reaper, worthy of the Grand Jury’s Prize. Similar characteristics could be emphasized of both technical objects, such as their industrial origin and for being be the complex result of a simple assembly of technical elements. Since then, technological development has experienced a continued acceleration, resulting in an increasing specialization and separation of knowledge about techniques which were naturally attached in the past. This process has happened at the expense of an integrative knowledge and against promiscuity between Industry and Architecture. This is, undoubtedly, an inherent sign of our time, which causes the natural and interest of architects and other technicians about transfers, trans-disciplinarity and inter-disciplinarity, as a reaction to reestablish channels of relationships between these different fields of knowledge. The emergence of technical objects as modern vehicles in the early twentieth century (the car, the Ocean liner, the airship or the airplane) is directly related to the Architecture of the First Machine Age. Modern architects’ fascination for those new ‘inhabitable’ structures has been maintained for over a century, with different intensity and paying attention to one and other technical objets, ranging from the domain of the symbolic value of the vehicles as objectsimages, during heroic period of the First Machine Age, to the more inquisitive glance characterizing the Second Machine Age, which sought a deeper understanding of the organization of such objects and the technical system to which they belonged. The periods immediately following both World Wars, showed a concentrated effort to bring new images of vehicles to the imaginary of architects, by means of publications and exhibitions. The homologous relationship between architectures and vehicles, in their capacity as living structures, is something well known since Le Corbusier used the images of cars, boats and airplanes to illustrate his manifesto, Towards an architecture in 1923. Modern vehicles have been the means by which to convey the concepts eager to transform the traditional attributes of Architecture: those relating to its manufacture, habitability, duration, functionality or aesthetics. The automobile stands out during the 30s and 50s, and the new vehicles of the Space Program satnd in the 60s and 70s. The prior knowledge and documentation of these events were a good indication to identify the industrial sector of Transportation as one of especial importance and as a fertile provider of technology transfer cases for Architecture. The Modern tradition, inaugurated by Le Corbusier in the 20s, has been maintained and defended by a host of modern architects like Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames and Craig Ellwood, whose work - inspired by the legacy of previous technologists as Bucky Fuller or Jean Prouvé- was fundamental and a mandatory reference for the next generation of architects like Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean and Richard Horden Kaplicky, among others. They have all contributed to increase the imaginary of the technical object, adding to it their architectural works. In the passage of the thesis, we repeatedly find a number of architects, who have been grouped according to a 'genealogical' structure, which has been called 'Technical Lineage'. Gathered by common interests and similar views or attitudes to the architectural design, understood as a technical object, they have operated through the practice of technology transfer, without limiting itself to specific compositional techniques of the architectural discipline. During the investigation, a selection of explicit references made by those architects, about other technical objects referring to their Architecture, has been compiled, showing constants and variations in their interests throughout the century, which has led to conclusions such as, having technicians sets (zeppelins factories, airships factories, car factories and shipyards) been taken by the architects of the first Modernity, as their main formal, compositional and imaginary models, while the Second Machine Age had taken them as a spatial and organizational model for their architecture. The above mentioned lineage of technologists includes weel-known ‘seed lines’ as: Eiffel- Suchov-Behrens, Gropius-Mies-LeCorbusier- Lods-Prouve, in continental Europe; British branches as Loudon-Paxton-Williams-Stirling- Gowan-Smithsons-Price-Archigram-Foster- Rogers-Piano-Kaplicky-Horden. And we could also find intercontinental connections as Fuller- Eames-Rudolph-Foster-Rogers, or other less predictable ramifications as LeRicolais-Kahn Piano-Kaplicky, or LeCorbusier-Frey-Lacaton & Vassal... Many more would surely deserve to be included in this list, and indeed, the thesis assumes the impossibility of including them all (for practical reasons) and even contemplates possible future extensions. The material included herein is to demonstrate the continuity in the approaches, statements and in the applied architectural design techniques, from which we can draw some conclusions. Today, one hundred years after Ford put up the moving assembly line, we still find this tradition alive in the words of the architect Richard Horden, whose work carries with it –as with the information embedded in every technical element- the whole techncial culture of a modern tradition. Horden is represented here as one of the exponents of what I have called the lineage of technologists. That is why I wanted to conclude the thesis with an interview to Richard Horden, held in May 2015 in his studio in London's Berkeley Square (see Appendices). Guides For the development of this thesis, another thesis, entitled: The mode of existence of technical objects, is taken as the main reference work. Read and published in 1958 by the French philosopher Gilbert Simondon [1924- 1989], it was dedicated to the ontology of the technical object. This work frames the intellectual approach of the thesis, which connects with phenomenology to mobilize a particular vision of Architecture. It is used as a model of ontological analysis to study its genesis, invention and evolutionary processes. To develop these, another work by the same author, titled Imagination and Invention (1965- 1966) has been used as a bibliographical complement. As for the disciplinary historical sources, Reyner P. Banham [1922-1988] and Martin E. Pawley [1938-2008] have been chosen as guides through the modern Architecture of the twentieth century. Their cronical reports on the First and Second Machine Age and their critical works have served as an index from which to reconstruct the imaginary of the modern technical object in the Machine Age7, and to stock up on projects and works of architecture, used as case studies for the thesis. These works have also been used as triggers for other literatures, which has been complementary to the former. Objectives of the Thesis The main objective of the thesis is to prove its hypothesis: if a work of architecture can be considered a technical object and under what conditions, building then a criterion for recognizing when a work of architecture meets the definition of a technical object. Another aim is to demonstrate the importance and power of Technology Transfer in the evolutionary process of Architecture, and to do it, some examples of a methodology for architectural design that Martin Pawley called 'Design by Assembly' are presented. It is also an objective to reconstruct an Atlas of the imaginary of the modern technical object, in order to better understand the causes, reasons and purposes that led modern architects to pursue architecture as a technical object. This Atlas allows to panoptically relate the various technical objects, revealing the true importance and significance of those and the architecture with whom they interact. Architectures are again at the largest and most complex industrial context and the history of technology, which always belonged. Thus, they are able to reveal all the knowledge-in the shape of information-carried in their own 'genetic' code, displaying full chapters of technological culture as old as mankind and constantly growing and evolving. Thesis: Proving the Hypothesis Simondon ontologically defined the technical object as ‘that of which genesis exists’ and that develops ‘a tendency towards solidarity and unity’. For an architecture to be recognized as a technical object, a number of conditions should be given, in the successive phases involved in their mode of existence: Imagination. These architectures refer to an imaginary featuring images-object other technical objects (technical sets, technical individuals and technical elements). These images are the means to an eidetic transfer of the technical objects which they symbolize. Invention. These architectures are the result of tectonic transfers, which occur during the architectural design process, by assembling materials, components or procedures used in industry for the production of other technical objects. Individuation. These architectures evolve and are individualized by ‘concretization’, a process leading to the full integration of its parts and aiming the full convergence of its functions into a single structure. This integration tends towards the naturalization of the technical object, by means of a symbiotic incorporation of their associated milieus. After checking if there is a genesis of them, which evolves through the phases of imagination and invention and concretization, their imaginary, materiality, structure and organization are analyzed in order to detect patterns and common organizational principles to other technical objects counterparts. Structure The main text of the thesis consists of three parts. Before there is an Introduction to the main concepts that are exploited in the thesis on ontology Simondonian technical object, and technology transfer applied to Architecture. Then a first part covers the Imaginary of the modern technical object, a second part is dedicated to the Invention and a third part to the individuation process The thesis ends with a section for the Discussion and the Conclusions. The Introduction to the technical object, this is ontologically defined and its different categories are distinguished. The process of genesis of the technical object and the phases of imagination, invention and indivuation are explained. Concepts as Transduction, Technicality and Technical system are presented for being fundamental to understand the concept of Technology Transfer that will take place later. The concretization is explained as the particular mode of individuation and evolution of technical objects, a process by which the different parts of a technical object, are integrated and begin a tendency towards a convergence in itself. The first part, dedicated to the Imagination of the architectural technical object presents a parcial "archaeological" reconstruction the imaginary of the modern technical object, intended to better understand its genesis and the relationship with other technical objects. The imaginary sources are searched in the premises of the Industry of the early twentieth century, and particularly in the factories of modern vehicles, in order to see, to what extent these technical objects were important to imagine modern architecture. The reconstruction is continued until the Second Machine Age, when a new, more inquisitive and precise gaze turns to other factories, other vehicles and other components and materials, inquiring now about their organizational qualities. The second part is devoted to the Invention of the architectural technical object. The effectiveness of the simondonian concept of Transduction is checked: a transmitted and transformed sign or information, which relates to Technology Transfer, a synergetic process by which an industrial sector benefits from the development of another sector, to which some architects and historians have explicitly referred to explain their works during Machine Age, and which is crucial for the development of the industry. Technology transfer would be the transmission of a set of information or knowledge about technique, including the factual sphere of technique, but also the sensitive sphere of experience. In their application to Architecture, these transfers have been classified according to three types: Eidetic, Tectonic and Organic. Eidetic Transfers operate from an intuitive knowledge and are useful for transmitting information about the essence of the technical object serving as a source. Abstract concepts are transmitted through the object-images to produce an equivalent transformation in Architecture. A group of concepts that have been the subject of technology transfers of eidetic nature, and have been originated in the imaginary of the modern technical object, have been detected as a result of the research: FABRICATED, INHABITABLE, FUNCTIONAL, EFFICIENT, OBSOLESCENT, and BEAUTIFUL. The transfers can also be Tectonic when, that which is transferred is a constructive or structural technique, applied through artificial MATERIALS such as metals, composites as the ferrocement, or plywood, or alloys such as aluminum; or by means of the assembly of STRUCTURES or parts of other technical objects such as hulls, fuselages, car bodies or rigs, resulting in the invention of a new architectural technical object. In the case of ORGANIC transfers, what is transferred is an organizational technique, applied by means of a set of PROCEDURES defining the activity of the architect as a technologist and inventor of technical objects. These procedures have a transformative effect on three traditional institutions for Architecture: the School, the Atelier and the Work, and the results are summarized in new models of organization of the Education of Architecture, with the onset of the Architectural Design Studios or workshops; new models of organization of the practice of architect: the technical office; and new models of space organization, based on the spatial organization of the industry, resulting in spatial patterns or spatial matrices; a new model of organization of the project, which uses graphical tools and industrail protocols as the assembly as a methodology; a new model of architectural production based on the industrialization. After explaining the concepts and the genesis of assembly and montage, Design by assembly is presented as a method that promotes architectural invention, and is shown using some case studies analyzed in the thesis, in which there has been made some conceptual, constructive or organizational transfer. After analyzing the architectures studied in the thesis, genetic method proposed by Simondon was used to understand every particular evolution, reconstructing their genealogical lines up to their ancestors, identifying a series of genetic lineages, which correspond to the technical sets studied in the thesis : the shipyard, the car factory, and aircraft factory. The real ancestors of Modernity. The spatial organization systems of these technical sets are directly related to the technical object that is fabricated within them. From that point, a number of operational matrices are defined (MILL, SHOP, SHED) and used to make a taxonomy of the architectural technical object. This is exemplified by some projects by architects as Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean and Richard Horden Kaplicky. Interest of the thesis Since the beginning of the new century, several authors have shown a renewed interest in defining what a project is, how it is constituted and what it is for. The approaches to the subject are brought from analytic philosophy (Galle, 2008) or from the philosophy of technology (Verbeek, 2005; Vermaas, 2009) and they often speak about the relationship between design and material culture (Dorschel 2003, 2010 or Preston Boradkar 2012). It is also important to note the recent and growing interest in the work of French philosopher Gilbert Simondon [1924-1989], mainly known for its important contribution to the philosophy of technology and phenomenology of the technical object, and the influence on the thinking of contemporary philosophers as Paolo Virno, Bruno Latour or Gilles Deleuze, being the latter a author present in many doctoral theses and theoretical research conducted at major architecture schools around the world since the 90s to the present. The republication and translation of the work of Simondon (eng. 1980, spn. 2008) has received the attention from current philosophers such as Bernard Stiegler who continues to use its study and analysis to advance his thinking, thus being present in the contemporary debate about the technique. After its recent translation into Spanish, the thought of Simondon has aroused great interest in Latin America, as evidenced by the organization of various conferences and symposia, as well as the proliferation of publications about his work and thought8. Future translations of the rest of his major works, will ensure increased introduction in the academic community. Efforts have been made to present an alternative view of the History of Modern Architecture, using a reporter as Reyner P.Banham as a guide. The Machine Age intersects Simondon’s mechanology and his "technical vitalism", resulting in a fresh, renewed and optimistic interpretation of some of the most important works of Architecture of the twentieth century, which will surely contribute to the development of this century’s Architecture, already immersed in the paradigm shift towards sustainability and ecology.

Heterojunction Band Offset Limitations on Open-Circuit Voltage in p-ZnTe/n-ZnSe Solar Cells

Limitations on the open-circuit voltage of p-ZnTe/n-ZnSe heterojunction solar cells are studied via current-voltage (I-V) measurements under solar concentration and at variable temperature. The open-circuit voltage reaches a maximum value of 1.95 V at 77 K and 199 suns. The open-circuit voltage shows good agreement with the calculated built-in potential of 2.00 V at 77 K. These results suggest that the open-circuit voltage is limited by heterojunction band offsets associated with the type-II heterojunction band lineup, rather than the bandgap energy of the ZnTe absorber material.

Functional and physiological consequences of genetic variation at phosphoglucose isomerase: Heat shock protein expression is related to enzyme genotype in a montane beetle

Allele frequency variation at the phosphoglucose isomerase (PGI) locus in Californian populations of the beetle Chrysomela aeneicollis suggests that PGI may be undergoing natural selection. We quantified (i) apparent Michaelis-Menten constant (Km) of fructose 6-phosphate at different temperatures and (ii) thermal stability for three common PGI genotypes (1–1, 1–4, and 4–4). We also measured air temperature (Ta) and beetle body temperature (Tb) in three montane drainages in the Sierra Nevada, California. Finally, we measured 70-kDa heat shock protein (Hsp70) expression in field-collected and laboratory-acclimated beetles. We found that PGI allele 1 predominated in the northernmost drainage, Rock Creek (RC), which was also significantly cooler than the southernmost drainage, Big Pine Creek (BPC), where PGI allele 4 predominated. Allele frequencies and air temperatures were intermediate in the middle drainage, Bishop Creek (BC). Differences among genotypes in Km (1–1 > 1–4 > 4–4) and thermal stability (4–4 > 1–4 > 1–1) followed a pattern consistent with temperature adaptation. In nature, Tb was closely related to Ta. Hsp70 expression in adult beetles decreased with elevation and differed among drainages (BPC > BC > RC). After laboratory acclimation (8 days, 20°C day, 4°C night) and heat shock (4 h, 28–36°C), Hsp70 expression was greater for RC than BPC beetles. In RC, field-collected beetles homozygous for PGI 1–1 had higher Hsp70 levels than heterozygotes or a 4–4 homozygote. These results reveal functional and physiological differences among PGI genotypes, which suggest that montane populations of this beetle are locally adapted to temperature.

Ambient UV-B radiation causes deformities in amphibian embryos

There has been a great deal of recent attention on the suspected increase in amphibian deformities. However, most reports of amphibian deformities have been anecdotal, and no experiments in the field under natural conditions have been performed to investigate this phenomenon. Under laboratory conditions, a variety of agents can induce deformities in amphibians. We investigated one of these agents, UV-B radiation, in field experiments, as a cause for amphibian deformities. We monitored hatching success and development in long-toed salamanders under UV-B shields and in regimes that allowed UV-B radiation. Embryos under UV-B shields had a significantly higher hatching rate and fewer deformities, and developed more quickly than those exposed to UV-B. Deformities may contribute directly to embryo mortality, and they may affect an individual’s subsequent survival after hatching.

Methylation is not the main force repressing the retrotransposon MAGGY in Magnaporthe grisea

We have introduced the LTR-retrotransposon MAGGY into a naive genome of Magnaporthe grisea and estimated the copy number of MAGGY in a cell by serial isolation of fungal protoplasts at certain time intervals. The number of MAGGY elements rapidly increased for a short period following introduction. However, it did not increase geometrically and reached equilibrium at 20–30 copies per genome, indicating that MAGGY was repressed or silenced during proliferation. De novo methylation of MAGGY occurred immediately following invasion into the genome but the degree of methylation was constant and did not correlate with the repression of MAGGY. 5-Azacytidine treatment demethylated and transcriptionally activated the MAGGY element in regenerants but did not affect transpositional frequency, suggesting that post-transcriptional suppression, not methylation, is the main force that represses MAGGY proliferation in M.grisea. Support for this conclusion was also obtained by examining the methylation status of MAGGY sequences in field isolates of M.grisea with active or inactive MAGGY elements. Methylation of the MAGGY sequences was detected in some isolates but not in others. However, the methylation status did not correlate with the copy numbers and activity of the elements.

Hydroperoxide lyase depletion in transgenic potato plants leads to an increase in aphid performance

Hydroperoxide lyases (HPLs) catalyze the cleavage of fatty acid hydroperoxides to aldehydes and oxoacids. These volatile aldehydes play a major role in forming the aroma of many plant fruits and flowers. In addition, they have antimicrobial activity in vitro and thus are thought to be involved in the plant defense response against pest and pathogen attack. An HPL activity present in potato leaves has been characterized and shown to cleave specifically 13-hydroperoxides of both linoleic and linolenic acids to yield hexanal and 3-hexenal, respectively, and 12-oxo-dodecenoic acid. A cDNA encoding this HPL has been isolated and used to monitor gene expression in healthy and mechanically damaged potato plants. HPL gene expression is subject to developmental control, being high in young leaves and attenuated in older ones, and it is induced weakly by wounding. HPL enzymatic activity, nevertheless, remains constant in leaves of different ages and also after wounding, suggesting that posttranscriptional mechanisms may regulate its activity levels. Antisense-mediated HPL depletion in transgenic potato plants has identified this enzyme as a major route of 13-fatty acid hydroperoxide degradation in the leaves. Although these transgenic plants have highly reduced levels of both hexanal and 3-hexenal, they show no phenotypic differences compared with wild-type ones, particularly in regard to the expression of wound-induced genes. However, aphids feeding on the HPL-depleted plants display approximately a two-fold increase in fecundity above those feeding on nontransformed plants, consistent with the hypothesis that HPL-derived products have a negative impact on aphid performance. Thus, HPL-catalyzed production of C6 aldehydes may be a key step of a built-in resistance mechanism of plants against some sucking insect pests.

Spin glasses on the hypercube

We present a mean field model for spin glasses with a natural notion of distance built in, namely, the Edwards-Anderson model on the diluted D-dimensional unit hypercube in the limit of large D. We show that finite D effects are strongly dependent on the connectivity, being much smaller for a fixed coordination number. We solve the nontrivial problem of generating these lattices. Afterward, we numerically study the nonequilibrium dynamics of the mean field spin glass. Our three main findings are the following: i the dynamics is ruled by an infinite number of time sectors, ii the aging dynamics consists of the growth of coherent domains with a nonvanishing surface-volume ratio, and iii the propagator in Fourier space follows the p4 law. We study as well the finite D effects in the nonequilibrium dynamics, finding that a naive finite size scaling ansatz works surprisingly well.

Time-motion analysis in women’s team handball: importance of aerobic performance

Women’s handball is a sport, which has seen an accelerated development over the last decade. Data on movement patterns in combination with physiological demands are nearly nonexistent in the literature. The aim of this study was twofold: first, to analyze the horizontal movement pattern, including the sprint acceleration profiles, of individual female elite handball players and the corresponding heart rates (HRs) during a match and secondly to determine underlying correlations with individual aerobic performance. Players from one German First League team (n = 11) and the Norwegian National Team (n = 14) were studied during one match using the Sagit system for movement analysis and Polar HR monitoring for analysis of physiological demands. Mean HR during the match was 86 % of maximum HR (HRmax). With the exception of the goalkeepers (GKs, 78 % of HRmax), no position-specific differences could be detected. Total distance covered during the match was 4614 m (2066 m in GKs and 5251 m in field players (FPs)). Total distance consisted of 9.2 % sprinting, 26.7 % fast running, 28.8 % slow running, and 35.5 % walking. Mean velocity varied between 1.9 km/h (0.52 m/s) (GKs) and 4.2 km/h (1.17 m/s) (FPs, no position effect). Field players with a higher level of maximum oxygen uptake (V̇O2max) executed run activities with a higher velocity but comparable percentage of HRmax as compared to players with lower aerobic performance, independent of FP position. Acceleration profile depended on aerobic performance and the field player’s position. In conclusion, a high V̇O2max appears to be important in top-level international women’s handball. Sprint and endurance training should be conducted according to the specific demands of the player’s position.

Diversity for Texts Builds in Language L(MT): Indexes Based in Theory of Information

If one has a distribution of words (SLUNs or CLUNS) in a text written in language L(MT), and is adjusted one of the mathematical expressions of distribution that exists in the mathematical literature, some parameter of the elected expression it can be considered as a measure of the diversity. But because the adjustment is not always perfect as usual measure; it is preferable to select an index that doesn't postulate a regularity of distribution expressible for a simple formula. The problem can be approachable statistically, without having special interest for the organization of the text. It can serve as index any monotonous function that has a minimum value when all their elements belong to the same class, that is to say, all the individuals belong to oneself symbol, and a maximum value when each element belongs to a different class, that is to say, each individual is of a different symbol. It should also gather certain conditions like they are: to be not very sensitive to the extension of the text and being invariant to certain number of operations of selection in the text. These operations can be theoretically random. The expressions that offer more advantages are those coming from the theory of the information of Shannon-Weaver. Based on them, the authors develop a theoretical study for indexes of diversity to be applied in texts built in modeling language L(MT), although anything impedes that they can be applied to texts written in natural languages.

Construction of 17-19th century domes in the province of Alicante (Spain): the case of San Juan Bautista in Cox

From the late seventeenth to early nineteenth centuries, many religious temples have been built in the province of Alicante (south east of Spain) with brick domes as their main characteristic feature. Often, the limited data available about these remarkable constructions make rehabilitation interventions become into real research projects, with a high value for their historic conservation over time. The aim of this paper is to show a detailed refurbishment analysis of a religious temple built in 1778, showing the need of preservation of historic buildings as a part of the architectural heritage by establishing a common pattern of materials, geometry and constructive systems, specifically in their domes. In most cases, there was not an architectural project for the construction, that is why the analysis of any documentary and archival sources available is essential to find different ways to proceed on the use and maintenance of these religious buildings.