Projecting the new world city: The city as spectacle in an urban light festival

As a precursor to the 2014 G20 Leaders’ Summit held in Brisbane, Australia, the Queensland Government sponsored a program of G20 Cultural Celebrations, designed to showcase the Summit’s host city. The cultural program’s signature event was the Colour Me Brisbane festival, a two-week ‘citywide interactive light and projection installations’ festival that was originally slated to run from 24 October to 9 November, but which was extended due to popular demand to conclude with the G20 Summit itself on 16 November. The Colour Me Brisbane festival comprised a series projection displays that promoted visions of the city’s past, present, and future at landmark sites and iconic buildings throughout the city’s central business district and thus transformed key buildings into forms of media architecture. In some instances the media architecture installations were interactive, allowing the public to control aspects of the projections through a computer interface situated in front of the building; however, the majority of the installations were not interactive in this sense. The festival was supported by a website that included information regarding the different visual and interactive displays and links to social media to support public discussion regarding the festival (Queensland Government 2014). Festival-goers were also encouraged to follow a walking-tour map of the projection sites that would take them on a 2.5 kilometre walk from Brisbane’s cultural precinct, through the city centre, concluding at parliament house. In this paper, we investigate the Colour Me Brisbane festival and the broader G20 Cultural Celebrations as a form of strategic placemaking—designed, on the one hand, to promote Brisbane as a safe, open, and accessible city in line with the City Council’s plan to position Brisbane as a ‘New World City’ (Brisbane City Council 2014). On the other hand, it was deployed to counteract growing local concerns and tensions over the disruptive and politicised nature of the G20 Summit by engaging the public with the city prior to the heightened security and mobility restrictions of the Summit weekend. Harnessing perspectives from media architecture (Brynskov et al. 2013), urban imaginaries (Cinar & Bender 2007), and social media analysis, we take a critical approach to analysing the government-sponsored projections, which literally projected the city onto itself, and public responses to them via the official, and heavily promoted, social media hashtags (#colourmebrisbane and #g20cultural). Our critical framework extends the concepts of urban phantasmagoria and urban imaginaries into the emerging field of media architecture to scrutinise its potential for increased political and civic engagement. Walter Benjamin’s concept of phantasmagoria (Cohen 1989; Duarte, Firmino, & Crestani 2014) provides an understanding of urban space as spectacular projection, implicated in commodity and techno-culture. The concept of urban imaginaries (Cinar & Bender 2007; Kelley 2013)—that is, the ways in which citizens’ experiences of urban environments are transformed into symbolic representations through the use of imagination—similarly provides a useful framing device in thinking about the Colour Me Brisbane projections and their relation to the construction of place. Employing these critical frames enables us to examine the ways in which the installations open up the potential for multiple urban imaginaries—in the sense that they encourage civic engagement via a tangible and imaginative experience of urban space—while, at the same time, supporting a particular vision and way of experiencing the city, promoting a commodified, sanctioned form of urban imaginary. This paper aims to dissect the urban imaginaries intrinsic to the Colour Me Brisbane projections and to examine how those imaginaries were strategically deployed as place-making schemes that choreograph reflections about and engagement with the city.

Comportamiento y mejoramiento de la gallina chiricana

I. Introducción El problema avicola nacional II. Presentación III. Descripción de las razas usadas en el experimento, Raza Leghorn, comportamiento en la zona del pacífico de Nicaragua, Raza Minorca o Monarca, Comportamiento en la zona del pacífico, Raza New Hompshire, Comportamiento en la zona del pacífico, Raza Plymouth Rock barrada, Comportamiento en la zona del pacífico, Raza Chiricana criolla. IV. Herencia del color de las plumas Blanco dominante, negro, blanco recesivo, rojo, barrado, abarramiento dorado, cuello, cresta y postura Cuello Cresta Postura VI. Conclusiones VII. Recomendaciones Bibliografía

Problemas actuales del automóvil y el futuro del mismo

315 p.

Mejorar la competividad mediante la colaboración interempresarial en el sector auxiliar de automoción

[ES] En este trabajo se pone de manifiesto la importancia de la colaboración a través de los clusters, en uno de los sectores industriales de mayor importancia en España: el sector de “Fabricantes de Equipos y Componentes para la Automoción”. Esto es así debido a que el sector de Fabricación de Automóviles cada vez delega más funciones de I+D+i y de coordinación con proveedores a las empresas auxiliares de automoción. Sin embargo, el hecho de ser éste un sector compuesto mayoritariamente por PYMEs dificulta la óptima realización de las mismas en solitario, por lo que la pertenencia a organizaciones que reúnan en su seno a los agentes de la cadena de valor, competidores e instituciones resulta decisiva a la hora de mantenerse en el mercado. Para confirmar el planteamiento teórico establecido, se realiza un análisis cualitativo comparativo entre el Cluster de Automoción del País Vasco y el resto de las empresas del Sector. Por último, con el fin de aportar herramientas, que permitan mejorar la competitividad, en un futuro marcado por la globalización y la crisis analizamos el Cluster de Fabricantes de Equipos y Componentes para la Automoción del País Vasco.

Desarrollo de una hoja de procesos para mecanizado de una cabeza de pistón de automóvil

[ES]El proyecto a realizar consiste en el desarrollo y elaboración de una hoja de procesos para mecanizado de un componente de automoción. Para ello se seleccionarán las herramientas adecuadas y calcularán los parámetros y tiempos de mecanizado

Selección de métodos de análisis de fatiga para ejes de transmisiones de máquinas.

[ES]Existe un elevado número de métodos para cálculos de fatiga en piezas sometidas a estados de tensiones multiaxiales. Cada método tiene un campo óptimo de aplicación: para materiales dúctiles, frágiles, estados con y sin tensiones medias, etc. En este Trabajo de Fin de Grado se trata de estudiar la precisión que proporcionan diferentes métodos de enfoque global (no de plano crítico) y comparar sus resultados a fin de decidir cuáles son los idóneos para los casos de carga más frecuentes en los ejes de transmisiones en automóviles.

Cypermethrin use in forestry and its impact on Welsh streams: An evaluation of the impact of cypermethrin use in forestry on Welsh streams

This is the Evaluation of the impact of cypermethrin use in forestry on Welsh streams from the University of Plymouth, published on September 2010 by the Environment Agency South West. The report focuses attention on Cypermethrin, a highly active synthetic pyrethroid insecticide effective against a wide range of pests in agriculture, public health, and animal husbandry. It is also used in forestry to control the pine weevil, Hylobius abietis. Cypermethrin is very toxic to aquatic invertebrates and fish at nanogram per litre concentrations. This project checks the effectiveness of current best practice measures in minimising the risk of pollution associated with the use of cypermethrin in forestry in Wales. Chemical results from the intensive studies show that cypermethrin entered minor watercourses draining treated areas at two of the eight sites. In one of these cases the level was well in excess of the short-term Predicted No Effect Concentration. The absence of a buffer area at the other site resulted in the cypermethrin reaching a main drain. However dilution appeared to be sufficient to prevent any impact on water quality or on the invertebrate community in the main stream. Invertebrate and chemical data from the extensive survey showed little evidence of pollution due to wider use of cypermethrin in Welsh forestry. Finally, a number of recommendations are made for further tightening controls on forestry practice to minimise the risk of cypermethrin entering the aquatic environment.

Defects Detection and Assessment in Concrete Surfaces

Aside from cracks, the impact of other surface defects, such as air pockets and discoloration, can be detrimental to the quality of concrete in terms of strength, appearance and durability. For this reason, local and national codes provide standards for quantifying the quality impact of these concrete surface defects and owners plan for regular visual inspections to monitor surface conditions. However, manual visual inspection of concrete surfaces is a qualitative (and subjective) process with often unreliable results due to its reliance on inspectors’ own criteria and experience. Also, it is labor intensive and time-consuming. This paper presents a novel, automated concrete surface defects detection and assessment approach that addresses these issues by automatically quantifying the extent of surface deterioration. According to this approach, images of the surface shot from a certain angle/distance can be used to automatically detect the number and size of surface air pockets, and the degree of surface discoloration. The proposed method uses histogram equalization and filtering to extract such defects and identify their properties (e.g. size, shape, location). These properties are used to quantify the degree of impact on the concrete surface quality and provide a numerical tool to help inspectors accurately evaluate concrete surfaces. The method has been implemented in C++ and results that validate its performance are presented.

Automated 3D Vision Tracking for Project Control Support

On-site tracking in open construction sites is often difficult because of the large amounts of items that are present and need to be tracked. Additionally, the amounts of occlusions/obstructions present create a highly complex tracking environment. Existing tracking methods are based mainly on Radio Frequency technologies, including Global Positioning Systems (GPS), Radio Frequency Identification (RFID), Bluetooth and Wireless Fidelity (Wi-Fi, Ultra-Wideband, etc). These methods require considerable amounts of pre-processing time since they need to manually deploy tags and keep record of the items they are placed on. In construction sites with numerous entities, tags installation, maintenance and decommissioning become an issue since it increases the cost and time needed to implement these tracking methods. This paper presents a novel method for open site tracking with construction cameras based on machine vision. According to this method, video feed is collected from on site video cameras, and the user selects the entity he wishes to track. The entity is tracked in each video using 2D vision tracking. Epipolar geometry is then used to calculate the depth of the marked area to provide the 3D location of the entity. This method addresses the limitations of radio frequency methods by being unobtrusive and using inexpensive, and easy to deploy equipment. The method has been implemented in a C++ prototype and preliminary results indicate its effectiveness

Notes and memoranda

Probable relation between temperature and the annual catch of anchovies in the Schelde District Halosphaera viridis (first record at Plymouth)

Notes and memoranda

Colour-changes in Cottus bubalis. Palaemonetes varians in Plymouth