On characterization of deformation microstructure in Boron modified Ti-6Al-4V alloy

Addition of boron in small quantities to various titanium alloys have shown significant improvement in mechanical behavior of materials. In the present study, electron back-scatter diffraction (EBSD) techniques have been applied to investigate the deformation microstructure evolution in boron modified two-phase titanium alloy Ti-6Al-4V. The alloy was hot compressed at 750 degrees C up to 50% height reduction at two different strain rates (10(-3) s(-1) and 1 s(-1)). The EBSD analyses indicated significant differences in deformed microstructure of the base alloy and the alloy containing boron. A strong subgrain formation tendency was observed along with inhomogeneous distribution of dislocations inside large a colonies of Ti64. In contrast, a colonies were relatively strain free for Ti64 + B, with more uniform dislocation density distribution. The observed difference is attributed to microstructural modifications viz, grain size refinement and presence of TiB particles at grain boundary produced due to boron addition. (C) 2010 Elsevier B.V. All rights reserved.

Alloy design for fracture resistance

Several methods for improving the strength of metallic materials are available and correlations between strength and various microstructural features have been established. The purpose of this paper is to review parallel developments favouring improved fracture resistance. Resistance to fracture in monotonie loading, cyclic loading and when fracture is environment-aided have been considered in steels, aluminium alloys and anisotropic materials. Finally, the question of optimising alloy behaviour is discussed.

Debenzylation by Ni-A1 alloy

Nickel-aluminum alloy in aqueous sodium hydroxide-ethanol medium brings about facile hydro-enolrsis of benzyl ether function in substrates carrying a vicinal methoxy group. Simplicity of the reaction conditions and cheapness of the reagent are some of the advanrages of the procedure. Additionally, carbonyl functions when present are untouched and alkaline medium of the reaction makes it compatible with the presence of acid-sensitite groups.

Cohésion modale et subordination : Le conditionnel et le jussif finnois au miroir de la valeur sémantique et discursive du subjonctif français

Modal cohesion and subordination. The Finnish conditional and jussive moods in comparison to the French subjunctive This study examines verb moods in subordinate clauses in French and Finnish. The first part of the analysis deals with the syntax and semantics of the French subjunctive, mood occurring mostly in subordinate positions. The second part investigates Finnish verb moods. Although subordinate positions in Finnish grammar have no special finite verb form, certain uses of Finnish verb moods have been compared to those of subjunctives and conjunctives in other languages. The present study focuses on the subordinate uses of the Finnish conditional and jussive (i.e. the third person singular and plural of the imperative mood). The third part of the analysis discusses the functions of subordinate moods in contexts beyond complex sentences. The data used for the analysis include 1834 complex sentences gathered from newspapers, online discussion groups and blog texts, as well as audio-recorded interviews and conversations. The data thus consist of both written and oral texts as well as standard and non-standard variants. The analysis shows that the French subjunctive codes theoretical modality. The subjunctive does not determine the temporal and modal meaning of the event, but displays the event as virtual. In a complex sentence, the main clause determines the temporal and modal space within which the event coded by the subjunctive clause is interpreted. The subjunctive explicitly indicates that the space constructed in the main clause extends its scope over the subordinate clause. The subjunctive can therefore serve as a means for creating modal cohesion in the discourse. The Finnish conditional shares the function of making explicit the modal link between the components of a complex construction with the French subjunctive, but the two moods differ in their semantics. The conditional codes future time and can therefore occur only in non-factual or counterfactual contexts, whereas the event expressed by French subjunctive clauses can also be interpreted as realized. Such is the case when, for instance, generic and habitual meaning is involved. The Finnish jussive mood is used in a relatively limited number of subordinate clause types, but in these contexts its modal meaning is strikingly close to that of the French subjunctive. The permissive meaning, typical of the jussive in main clause positions, is modified in complex sentences so that it entails inter-clausal relation, namely concession. Like the French subjunctive, the jussive codes theoretical modal meaning with no implication of the truth value of the proposition. Finally, the analysis shows that verb moods mark modal cohesion, not only on the syntagmatic level (namely in complexe sentences), but also on the paradigmatic axis of discourse in order to create semantic links over entire segments of talk. In this study, the subjunctive thus appears, not as an empty category without function, as it is sometimes described, but as an open form that conveys the temporal and modal meanings emerging from the context.

Ball wear and its control in the grinding of a lead-zinc sulphide ore

Marked ball grinding tests were carried out in the laboratory with a lead-zinc sulphide ore under different experimental conditions using high carbon low alloy steel (cast and forged) and high chrome cast iron balls. Relative ball wear as a function of grinding period and milling conditions was evaluated for the different types of ball materials. The role of corrosion and abrasion-erosion in the wear of grinding media is brought out. Methods to minimise ball wear through control of mill atmosphere and addition of reagents are discussed.

Continuous ordering below the tricritical point: A critical test for the kinetic pathway in Fe-12at.% Si alloy

A critical test has been presented to establish the nature of the kinetic pathways for the decomposition of Fe-12 at.% Si alloy below the metastable tricritical point. The results, based on the measurements of saturation magnetization, establish that a congruent ordering from B2 --> D0(3) precedes the development of a B2 + D0(3) two-phase field, consistent with the predictions in 1976 of Allen and Cahn.

Effect Of Electroslag Refining On Microstructure And Mechanical-Properties Of Is-7670 Alloy

The electroslag refining technique is one of the modern tools which is capable of imparting superior mechanical and chemical properties to metals and alloys. Refining usually results in the elimination of a number of casting or solidification defects, such as shrinkage porosity, gas porosity, pipe, micro- and macro segregation. Remelting also imparts a directional grain structure apart from refining the size of the inclusions, grains and precipitates. This technique has over the years been used widely and successfully to improve the mechanical and chemical properties of steels and alloy steels which are used in the nuclear, missile, aerospace and marine industries for certain critical applications. But the application of ESR to aluminium and its alloys is only recent. This paper investigates the response of an aluminium alloy (corresponding to the Indian Specification IS: 7670) to ESR. Based on theoretical considerations and microstructural evidence it elucidates how ESR of aluminium alloys differs from that of ferrous alloys. The improvement achieved in mechanical properties of the alloy is correlated with the microstructure.

Deformation processing map for control of microstructure in Al---4Mg alloy

The compression test flow stress data of Al-4Mg alloy at different temperatures and strain rates are analysed using a dynamic materials model which considers the workpiece material as a dissipator of power causing microstructural changes. A processing map representing the efficiency of power dissipation as a function of temperature and strain rate has been established and optimum processing conditions for the alloy are determined. The features of the map correlate well with the microstructure and mechanical properties.