Extraction and concentration of vapors from fire debris for forensic purposes: evaluation of the use of Radiello Passive Air Sampler

The Radiello Passive Air Sampler is one of the latest innovations developed for the sampling of pollutants in the air by passive headspace. It has been reported that its properties allow an enhanced sensitivity, reproducibility and adsorption capacity. It therefore appears to be of interest in the extraction of potential residues of ignitable liquids present in fire debris when arson is suspected. A theoretical approach and several laboratory tests have made it possible to precisely characterize in a forensic perspective the potential of the device in extracting and concentrating the vapors of ignitable liquids found in fire debris. Despite some advantages, the Radiello device appears to be less efficient than traditional axial symmetry samplers.

Evaluation of the RapidAir 457 Air Void Analyzer, March 2012

An adequate air void system is imperative to produce concrete with freeze-thaw durability in a wet freeze environment such as found in Iowa. Specifications rely on a percentage of air obtained in the plastic state by the pressure meter. Actual, in place air contents, of some concrete pavements in Iowa, have been found with reduced air content due to a number of factors such as excessive vibration and inadequate mixing. Determining hardened air void parameters is a time consuming process involving potential for human error. The RapidAir 457 air void analyzer is an automated device used to determine hardened air void parameters. The device is used in Europe and has been shown to quickly produce accurate and repeatable hardened air results. This research investigates how well the RapidAir 457 results correlate to plastic air content and the image analysis air technique. The repeatability and operator variation were also investigated, as well as, the impact of aggregate porosity and selection of threshold value on hardened air results.

Biotecnologia Ambiental. Aplicacions biotecnològiques a la millora del medi ambient

La biotecnología ambiental comprende el conjunto de actividades tecnológicas que facilitan la comprensión y la gestión de los sistemas biológicos en el medio ambiente, con el fin de proveer productos y servicios. Actualmente, la gestión del medio ambiente y de sus recursos naturales no se comprende si no se realiza de manera sostenible. Los avances científicos y tecnológicos le están permitiendo a la biotecnología ambiental, el desarrollo de nuevas herramientas y aplicaciones con los que responder a los principales retos medioambientales actuales. Entre estos debe destacarse la disponibilidad de recursos hídricos y energéticos. El papel esencial de los microorganismos tanto en el ciclo de los elementos como en el funcionamiento de los ecosistemas naturales ha comportado una estrecha relación entre la biotecnología ambiental y la ecología microbiana. Las nuevas técnicas moleculares de genómica, proteómica i metabolómica, han facilitado a la biotecnología ambiental plantearse nuevas perspectivas a partir de los recientes conocimientos estructurales y funcionales de los consorcios microbianos. La comprensión de la biodiversidad y la funcionalidad de los estos consorcios microbianos está introduciendo una nueva forma de gestionar los recursos naturales y el medio ambiente, de manera similar a como actualmente el estudio de los recursos humanos de una empresa resulta una herramienta esencial para la dirección de empresas y el establecimiento de planes estratégicos. Los principales ámbitos de interés actual de la biotecnología ambiental son aquellos aspectos medioambientales relacionados con el cambio climático, la búsqueda de nuevas fuentes energéticas renovables y alternativas, la mejora de los procesos de reciclaje, el aprovechamiento y la gestión de recursos hídricos, y la mejora de las interacciones entre salud y medio ambiente. No obstante, en nuestro ámbito territorial presentan una mayor importancia y demanda social las actividades y metodologías tecnológicas de la biotecnología ambiental relacionadas con los procesos de reciclaje y bioremediación de suelos contaminados, la mejora de la gestión y el control de la calidad de nuestros recursos hídricos y la mejora de aquellas actividades donde interacciona la salud y el medio ambiente. Las aportaciones significativas de la biotecnología ambiental en el desarrollo de energías realmente alternativas y en el control del cambio climático queda relegadas en un segundo término des de un punto de vista de su aplicabilidad actual y futura a corto plazo.

Oeuvres posthumes de M. Bidault de Villiers,... renfermant : °1 Un Mémoire sur la topographie médicale et sur les maladies épidémiques de l'île Minorque, traduit de l'anglais de Cleghorn ; °2 des Remarques et observations pour servir à l'histoire des phlegmasies gangréneuses et spécialement de la pustule maligne ; °3 des Observations adressées à M. Guyton de Morveau, relativement à plusieurs passages de son Traité des moyens de désinfecter l'air

Comprend : Mémoire sur la topographie médicale et sur les maladies épidémiques de l'île Minorque, traduit de l'anglais

L'experiència pilot desenvolupada a partir del projecte d'innovació "La gestió integrada de la qualitat, el medi ambient i la seguretat en la docència experimental dels estudis de grau de les Facultats de Belles Arts"

Es presenta un projecte d'innovació docent, la recerca desevolupada del qual va incorporar aspectes relacionats amb la seguretat i la sostenibilitat dels procediments realitzats als tallers i laboratoris de les Facultats de Belles Arts, aplicant criteris de gestió de qualitat. Els resultats d'aquestes investigacions tenen una extensió social en l'àmbit de les Belles Arts en general. El projecte d'innovació docent va aplicar criteris de gestió de qualitat. La recerca desenvolupada va incorporar aspectes relacionats amb la seguretat i la sostenibilitat dels procediments als tallers i laboratoris de les Facultats de Belles Arts. Els resultats d¿aquestes investigacions tenen una extensió social en l'àmbit de les Belles Arts en general. Amb aquest projecte es va redissenyar un model de procediment normalitzat de treball (PNT) que 11 tallers diferents de les Facultats de BBAA de Barcelona, Conca i València van utilitzar per a elaborar 14 PNT i 3 vídeos de suport. Aquests es van aplicar durant una experiència pilot (curs 2009-2010). El nombre de participants en l¿experiència va ser de 211 alumnes, 15 professors, 10 tècnics de taller, majoritàriament de BBAA de la Universitat de Barcelona. L'experiència pilot va demostrar satisfactòriament la viabilitat de l'aplicació del model de PNT adoptat i els beneficis, de la seva aplicació, orientats a la millora continuada de la qualitat docent i de la investigació. Per concloure el projecte es va elaborar el procediment general (PG) que determina les pautes per a redactar un PNT. Aquest PG va ser aprovat recentment per la CSSMA del Centre2 i es podrà aplicar en el futur en la Facultat de BBAA de Barcelona. Sobre l'experiència s'han realitzat les publicacions pertinents (un llibre i un DVD) i s'ha participat també en dos congressos.

First day of an oil spill on the open sea: early mass transfers of hydrocarbons to air and water.

During the first hours after release of petroleum at sea, crude oil hydrocarbons partition rapidly into air and water. However, limited information is available about very early evaporation and dissolution processes. We report on the composition of the oil slick during the first day after a permitted, unrestrained 4.3 m(3) oil release conducted on the North Sea. Rapid mass transfers of volatile and soluble hydrocarbons were observed, with >50% of ≤C17 hydrocarbons disappearing within 25 h from this oil slick of <10 km(2) area and <10 μm thickness. For oil sheen, >50% losses of ≤C16 hydrocarbons were observed after 1 h. We developed a mass transfer model to describe the evolution of oil slick chemical composition and water column hydrocarbon concentrations. The model was parametrized based on environmental conditions and hydrocarbon partitioning properties estimated from comprehensive two-dimensional gas chromatography (GC×GC) retention data. The model correctly predicted the observed fractionation of petroleum hydrocarbons in the oil slick resulting from evaporation and dissolution. This is the first report on the broad-spectrum compositional changes in oil during the first day of a spill at the sea surface. Expected outcomes under other environmental conditions are discussed, as well as comparisons to other models.

Measuring conduct and cost parameters in the Spanish air transport market

This paper estimates a model of airline competition for the Spanish air transport market. I test the explanatory power of alternative oligopoly models with capacity constraints. In addition, I analyse the degree of density economies. Results show that Spanish airlines conduct follows a price-leadership scheme so that it is less competitive than the Cournot solution. I also find evidence that thin routes can be considered as natural monopolies

aIr-1, a newly found locus on mouse chromosome 16 encoding a trans-acting activator factor for MHC class II gene expression.

RJ 2.2.5 is a human B cell line that has lost the capacity to express MHC class II genes. The human class II-positive phenotype is restored in somatic cell hybrids between RJ 2.2.5 and mouse spleen cells. By karyotype and molecular studies of an informative family of hybrids we have now shown that the reexpression of human class II gene products, as well as the maintenance of the mouse class II-positive phenotype, correlates with the presence of mouse chromosome 16. Thus, the existence on this mouse chromosome of a newly found locus, designated by us aIr-1, that determines a trans-acting activator function for class II gene expression, is established. Possible implications of this finding are discussed.

Characterization of surface functional groups present on laboratory-generated and ambient aerosol particles by means of heterogeneous titration reactions

A Knudsen flow reactor has been used to quantify surface functional groups on aerosols collected in the field. This technique is based on a heterogeneous titration reaction between a probe gas and a specific functional group on the particle surface. In the first part of this work, the reactivity of different probe gases on laboratory-generated aerosols (limonene SOA, Pb(NO3)2, Cd(NO3)2) and diesel reference soot (SRM 2975) has been studied. Five probe gases have been selected for the quantitative determination of important functional groups: N(CH3)3 (for the titration of acidic sites), NH2OH (for carbonyl functions), CF3COOH and HCl (for basic sites of different strength), and O3 (for oxidizable groups). The second part describes a field campaign that has been undertaken in several bus depots in Switzerland, where ambient fine and ultrafine particles were collected on suitable filters and quantitatively investigated using the Knudsen flow reactor. Results point to important differences in the surface reactivity of ambient particles, depending on the sampling site and season. The particle surface appears to be multi-functional, with the simultaneous presence of antagonistic functional groups which do not undergo internal chemical reactions, such as acid-base neutralization. Results also indicate that the surface of ambient particles was characterized by a high density of carbonyl functions (reactivity towards NH2OH probe in the range 0.26-6 formal molecular monolayers) and a low density of acidic sites (reactivity towards N(CH3)3 probe in the range 0.01-0.20 formal molecular monolayer). Kinetic parameters point to fast redox reactions (uptake coefficient ?0>10-3 for O3 probe) and slow acid-base reactions (?0<10-4 for N(CH3)3 probe) on the particle surface. [Authors]

Concrete Pavement Mixture Design and Analysis (MDA): Assessment of Air Void System Requirements for Durable Concrete, TPF-5(205), 2012

Concrete will suffer frost damage when saturated and subjected to freezing temperatures. Frost-durable concrete can be produced if a specialized surfactant, also known as an air-entraining admixture (AEA), is added during mixing to stabilize microscopic air voids. Small and well-dispersed air voids are critical to produce frost-resistant concrete. Work completed by Klieger in 1952 found the minimum volume of air required to consistently ensure frost durability in a concrete mixture subjected to rapid freezing and thawing cycles. He suggested that frost durability was provided if 18 percent air was created in the paste. This is the basis of current practice despite the tests being conducted on materials that are no longer available using tests that are different from those in use today. Based on the data presented, it was found that a minimum air content of 3.5 percent in the concrete and 11.0 percent in the paste should yield concrete durable in the ASTM C 666 with modern AEAs and low or no lignosulfonate water reducers (WRs). Limited data suggests that mixtures with a higher dosage of lignosulfonate will need about 1 percent more air in the concrete or 3 percent more air in the paste for the materials and procedures used. A spacing factor of 0.008 in. was still found to be necessary to provide frost durability for the mixtures investigated.