Semiautomatic object-space road extraction combining a stereoscopic image pair and a TIN-Based DTM

In this letter, a semiautomatic method for road extraction in object space is proposed that combines a stereoscopic pair of low-resolution aerial images with a digital terrain model (DTM) structured as a triangulated irregular network (TIN). First, we formulate an objective function in the object space to allow the modeling of roads in 3-D. In this model, the TIN-based DTM allows the search for the optimal polyline to be restricted along a narrow band that is overlaid upon it. Finally, the optimal polyline for each road is obtained by optimizing the objective function using the dynamic programming optimization algorithm. A few seed points need to be supplied by an operator. To evaluate the performance of the proposed method, a set of experiments was designed using two stereoscopic pairs of low-resolution aerial images and a TIN-based DTM with an average resolution of 1 m. The experimental results showed that the proposed method worked properly, even when faced with anomalies along roads, such as obstructions caused by shadows and trees.

Comparative analysis of the river buffalo somatostatin gene

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of summertime mesoscale convective systems on the heat balance and surface mixed layer dynamics of a large Amazonian hydroelectric reservoir

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Diagnostic index of three-dimensional osteoarthritic changes in temporomandibular joint condylar morphology

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cone-beam evaluation of pharyngeal airway space in class I, II, and III patients

The purpose of this study is to make a 3-dimensional (3-D) evaluation of the pharyngeal airway space (PAS) in patients with class I, II, and III malocclusion. Sixty patients were evaluated. The patients were divided in 3 groups according to their occlusion classification. The volume and area of PAS were evaluated using the software Dolphin 3-D Imaging in the preoperative period for orthognathic surgery. PAS volume and area were influenced by different patterns of malocclusion. The mean volume and area for class III patients were statistically bigger than for classes I and II patients (P < .001). There was also a significant difference for volume values between class I and II patients, being the bigger volume for the class I patients (P < .05). It was possible to conclude that the class III patients presented a bigger PAS compared with classes I and II patients.

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Desempenho de discos de corte de semeadora-adubadora em diferentes quantidades de cobertura vegetal

The quality and efficiency in straw cutting are determinants in the sowing process, according to the occurrence of "tamp" and stops, the magnitude of the straw removal or even the known effects of the seed "envelopment" where the cutting mechanism can not cut the remaining straw. Thus, the objective of this study was to evaluate the performance of different mechanisms for straw cutting of a seeder individualized in different amounts of crop coverage artificially added in a clay soil. The experiment was conducted at Unesp – Sao Paulo State University in the Experimental Farm Lageado, belonging to the College of Agricultural Sciences - Unesp, Botucatu. The experimental design was split plot with four replications, with main plots consisting of five quantities of black oat straw, in area with no-tillage system and subplots of three opening furrows mechanisms, which are: plane disk (PD), corrugated disk (CD) and wavy disk (WD). The wavy disk provided greater rolling resistance, reducing the speed of the set (tractor and equipment). The plane cutting disk showed the highest values of mobilized soil area, deeper penetration into the soil, requiring lower values of vertical force and higher values of lateral force. Regarding the type of waste and doses used, they offered no resistance to cutting and there was no change in the horizontal force on straw.

Eddy-induced upwelling off Cape Sao Tome (22 degrees S, Brazil)

The regional ocean off southeast Brazil (20 degrees S-28 degrees S) is known as a current-eddy-upwelling region. The proximity of the Brazil Current to the coast in the Cape Sao Tome vicinities, as well as of its quasi-stationary unstable meanders, suggests the possibility of background eddy-induced upwelling. Such phenomenon can intensify the prevalent coastal upwelling due to wind and topographic effects. In this paper, with the help of a numerical simulation, we provide evidence that eddy-induced upwelling in the absence of wind is possible in this region. The simulation was conducted with a regional configuration of the 3-D Princeton Ocean Model initialized by a feature-based implementation of the Brazil Current and Cape Frio eddy, blended with climatology. (C) 2010 Elsevier Ltd. All rights reserved.

The effects of a water-based exercise program on strength and functionality of older adults

Objective: To analyze the effects of a water-based exercise program on peak torque (PT) and rate of torque development (RTD) during maximal voluntary ballistic isometric contractions of the lower limb muscles and the performance of a number of functional tests in the elderly. Method: Thirty-seven elderly were randomly assigned to water-based training (3 d/wk for 12 wk) or a control group. Extensor and flexor PT and RTD of the ankle, knee, and hip joints and functional tests were evaluated before and after training. Results: PT increased after training for the hip flexors (18%) and extensors (40%) and the plantar-flexor (42%) muscles in the water-based group. RTD increased after training for the hip-extensor (10%), knee-extensor (11%), and ankle plantar-flexor (27%) muscles in the water-based group. Functional tests also improved after training in the water-based group (p < .05). Conclusion: The water-based program improved PT and RTD and functional performance in the elderly.

Surface-Potential-Based Drain Current Analytical Model for Triple-Gate Junctionless Nanowire Transistors

This paper proposes a drain current model for triple-gate n-type junctionless nanowire transistors. The model is based on the solution of the Poisson equation. First, the 2-D Poisson equation is used to obtain the effective surface potential for long-channel devices, which is used to calculate the charge density along the channel and the drain current. The solution of the 3-D Laplace equation is added to the 2-D model in order to account for the short-channel effects. The proposed model is validated using 3-D TCAD simulations where the drain current and its derivatives, the potential, and the charge density have been compared, showing a good agreement for all parameters. Experimental data of short- channel devices down to 30 nm at different temperatures have been also used to validate the model.

Further results in J and CTOD estimation procedures for SE(T) fracture specimens - Part I: Homogeneous materials

This study provides further developments of the evaluation procedure for J and CTOD in SE(T) fracture specimens based on plastic eta-factors and load separation analysis. Non-linear finite element analyses for plane-strain and 3-D models provide the relationship between plastic work and crack driving forces which define the eta-values. Further analyses based on the load separation method define alternative eta-values for the analyzed specimen configurations. Overall, the present results provide improved estimation equations for J and CTOD as a function of loading condition (pin load vs. clamp ends), crack geometry and strain hardening properties. (C) 2011 Elsevier Ltd. All rights reserved.

Performance and composition of bacterial communities in anaerobic fluidized bed reactors for hydrogen production: Effects of organic loading rate and alkalinity

This study evaluated the effects of the organic loading rate (OLR) and pH buffer addition on hydrogen production in two anaerobic fluidized bed reactors (AFBRs) operated simultaneously. The AFBRs were fed with glucose, and expanded clay was used as support material. The reactors were operated at a temperature of 30 degrees C, without the addition of a buffer (AFBR1) and with the addition of a pH buffer (AFBR2, sodium bicarbonate) for OLRs ranging from 19.0 to 140.6 kg COD m(-3) d(-1) (COD: chemical oxygen demand). The maximum hydrogen yields for AFBR1 and AFBR2 were 2.45 and 1.90 mol H-2 mol(-1) glucose (OLR of 84.3 kg COD m(-3) d(-1)), respectively. The highest hydrogen production rates were 0.95 and 0.76 L h(-1) L-1 for AFBR1 and AFBR2 (OLR of 140.6 kg COD m(-3) d(-1)), respectively. The operating conditions in AFBR1 favored the presence of such bacteria as Clostridium, while the bacteria in AFBR2 included Clostridium, Enterobacter, Klebsiella, Veillonellaceae, Chryseobacterium, Sporolactobacillus, and Burkholderiaceae. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

SECONDARY METABOLITES FROM NUDIBRANCHS Tambja stegosauriformis, Hypselodoris lajenis AND Okenia zoobotryon AND FROM BRYOZOANS Zoobotryon verticillatum AND Bugula dentata FROM THE BRAZILIAN COASTLINE

SECONDARY METABOLITES FROM NUDIBRANCHS Tambja stegosauriformis, Hypselodoris lajenis AND Okenia zoobotryon AND FROM BRYOZOANS Zoobotryon verticillatum AND Bugula dentata FROM THE BRAZILIAN COASTLINE. The chemical investigation of the MeOH extract from the bryozoan B. dentata MeOH yielded tambjamines A (1), C (3), D (4), K (6), aldehyde 8 and the new tambjamine J1(9), while the extract of its predator, the nudibranch Tambja stegosauriformis, yielded tambjamines C and K, along with aldehyde 8. Furodisinin lactone (11) was isolated from the nudibranch Hypselodoris lajensis, a compound previously isolated from Dysidea sponges. The alkaloid 2,5,6-tribromo-N-methylgramine (12) was isolated from the nudibranch Okenia zoobotryon and from its prey, the bryozoan Zoobotryon verticillatum, the only source of 12 previously known.

Do patients with osteogenesis imperfecta need individualized nutritional support?

Objective: Information regarding nutrition and body composition in patients diagnosed with osteogenesis imperfecta (OI) is scarce. In the present study, nutritional status, bone mineral density, and biochemical parameters of subjects with Of were evaluated. Methods: Patients with type I OI (n = 13) and type III OI (n = 13) and healthy controls (n = 8) were selected. Nutritional status and bone mineral density were assessed by a 3-d food diary and dual-energy X-ray absorptiometry at the lumbar spine, respectively. Body mass index, serum albumin, calcium, creatinine, cross-linked C-telopeptide, parathyroid hormone, and 25-hydroxivitamin D-3 were also evaluated. Results: Patients with OI had lower bone mineral density (P < 0.05 versus controls). Patients with type III OI had the highest body mass index (P < 0.05 versus patients with type I OI and controls) and the lowest lean body mass (P < 0.05 versus patients with type I OI and controls). In patients with OI, the number of fractures was positively correlated with body mass index (r = 0.581, P = 0.002) and the percentage of body fat (r = 0.451, P = 0.027) and negatively correlated to lean body mass (r = -0.523, P = 0.009). Even when taking dietary supplements, 58% and 12% of subjects with OI did not achieve the calcium and vitamin D recommendations, respectively. Conclusions: Body composition is a risk factor for bone fractures in subjects with OI. Individualized nutritional support is recommended not only to improve body composition but also to potentiate pharmacologic and physical therapies. (C) 2012 Elsevier Inc. All rights reserved.