Medical and pharmacological direct costs of a 9-week smoking cessation programme.

Background: Medical and pharmacological direct costs of cigarette smoking cessation programmes are not covered by health insurance in several countries despite documented cost-effectiveness. Design: prospective cost identification study of a 9-week programme in Switzerland. Methods: A total of 481 smokers were followed-up for 9 weeks. Socio-demographic characteristics, number of outpatient visits, dosage and frequency of use of nicotine replacement therapy (NRT) as well as date of relapse were prospectively collected. Individual cost of care until relapse or programme end as well as cost per week of follow-up were computed. Comparisons were carried out between the groups with or without relapse at the end of the programme. Results: Of the 209 men and 272 women included, 347 patients (72%) finished the programme. Among them, 240 patients (70%) succeeded in quitting and 107 patients (30%) relapsed. As compared with the group relapsing by the end of the programme, the group succeeding in quitting was more often living in a couple (68% vs. 55%, p = 0.029). Their mean weekly costs of visits were higher (CHF 81.2 ± 6.1 vs. 78.4 ± 7.6, p = 0.001), while their mean weekly costs for NRT were similar (CHF 24.2 ± 12.6 vs. 25.4 ± 15.9, p = 0.711). Mean total costs per week were similar (CHF 105.4 ± 15.4 vs. 103.8 ± 19.4, p = 0.252). More intensive NRT at week 4 increased the probability not to relapse at the end of the programme. Conclusions: Over 9 weeks, medical and pharmacological costs of stopping smoking are low. Good medical and social support as well as adequate NRT seem to play a role in successful quitting.

Costs of female reproduction in a conifer tree: a whole-tree level assessment

1. Costs of reproduction lie at the core of basic ecological and evolutionary theories, and their existence is commonly invoked to explain adaptive processes. Despite their sheer importance, empirical evidence for the existence and quantification of costs of reproduction in tree species comes mostly from correlational studies, while more comprehensive approaches remain missing. Manipulative experiments are a preferred approach to study cost of reproduction, as they allow controlling for otherwise inherent confounding factors like size or genetic background. 2. Here, we conducted a manipulative experiment in a Pinus halepensis common garden, removing developing cones from a group of trees and comparing growth and reproduction after treatment with a control group. We also estimated phenotypic and genetic correlations between reproductive and vegetative traits. 3. Manipulated trees grew slightly more than control trees just after treatment, with just a transient, marginally non-significant difference. By contrast, larger differences were observed for the number of female cones initiated 1 year after treatment, with an increase of 70% more cones in the manipulated group. Phenotypic and genetic correlations showed that smaller trees invested a higher proportion of their resources in reproduction, compared with larger trees, which could be interpreted as an indirect evidence for costs of reproduction. 4. Synthesis. This research showed a high impact of current reproduction on reproductive potential, even when not significant on vegetative growth. This has strong implications for how we understand adaptive strategies in forest trees and should encourage further interest on their still poorly known reproductive life-history traits.

Characterization of Reward Functions in Networks with Costs

In this paper we study network structures in which the possibilities for cooperation are restricted and can not be described by a cooperative game. The benefits of a group of players depend on how these players are internally connected. One way to represent this type of situations is the so-called reward function, which represents the profits obtainable by the total coalition if links can be used to coordinate agents' actions. The starting point of this paper is the work of Vilaseca et al. where they characterized the reward function. We concentrate on those situations where there exist costs for establishing communication links. Given a reward function and a costs function, our aim is to analyze under what conditions it is possible to associate a cooperative game to it. We characterize the reward function in networks structures with costs for establishing links by means of two conditions, component permanence and component additivity. Finally, an economic application is developed to illustrate the main theoretical result.

Computational and Energy Costs of Cryptographic Algorithms on Handheld Devices

Networks are evolving toward a ubiquitous model in which heterogeneousdevices are interconnected. Cryptographic algorithms are required for developing securitysolutions that protect network activity. However, the computational and energy limitationsof network devices jeopardize the actual implementation of such mechanisms. In thispaper, we perform a wide analysis on the expenses of launching symmetric and asymmetriccryptographic algorithms, hash chain functions, elliptic curves cryptography and pairingbased cryptography on personal agendas, and compare them with the costs of basic operatingsystem functions. Results show that although cryptographic power costs are high and suchoperations shall be restricted in time, they are not the main limiting factor of the autonomyof a device.

Population genomics of eusocial insects: the costs of a vertebrate-like effective population size

The evolution of reproductive division of labour and social life in social insects has lead to the emergence of several life-history traits and adaptations typical of larger organisms: social insect colonies can reach masses of several kilograms, they start reproducing only when they are several years old, and can live for decades. These features and the monopolization of reproduction by only one or few individuals in a colony should affect molecular evolution by reducing the effective population size. We tested this prediction by analysing genome-wide patterns of coding sequence polymorphism and divergence in eusocial vs. noneusocial insects based on newly generated RNA-seq data. We report very low amounts of genetic polymorphism and an elevated ratio of nonsynonymous to synonymous changes - a marker of the effective population size - in four distinct species of eusocial insects, which were more similar to vertebrates than to solitary insects regarding molecular evolutionary processes. Moreover, the ratio of nonsynonymous to synonymous substitutions was positively correlated with the level of social complexity across ant species. These results are fully consistent with the hypothesis of a reduced effective population size and an increased genetic load in eusocial insects, indicating that the evolution of social life has important consequences at both the genomic and population levels.

Accounting system for activity standard costs formulation in ERP environment

Toiminnanohjausjärjestelmän implementointi ja sen mukanaan tuomat muutokset tuotekustannuslaskentaan asettavat haasteita yritykselle. Metallitoimialalla toimivassa yrityksessä on havaittu samat haasteet implementoitaessa SAP R/3 toiminnanohjausjärjestelmää ja sen tuotekustannuslaskentatoiminnallisuutta. SAP R/3 tuotekustannuslogiikka tarvitsee tietoa järjestelmän ulkopuolelta, minkä huomioimatta jättäminen vaikuttaa suoraan laskentatarkkuuteen. Diplomityössä kehitetään sekä standardoitu prosessi että laskentajärjestelmä, joiden avulla pystytään laskemaan tarvittavat niin toimintokustannukset eri teräspalvelukeskuksen kuormituspisteille kuin kustannustenvyörytysarvot. Lasketut arvot muodostavat tarvittavat tekijät SAP R/3 tuotekustannuslaskennan master dataan. Tavoitteena on edesauttaa läpinäkyvän kustannustiedon muodostumista. Diplomityö pohjautuu ns. vesiputousmalliin (SDLC). Ensin tunnistetaan reunaehdot ympäristöstä, jossa tuotekustannuslaskenta toteutetaan. Tämä asettaa joustamattomia komponentteja kehitettävälle laskentajärjestelmälle. Joustavat komponentit sen sijaan antavat vapautta laskentajärjestelmälle. Yhdistämällä joustamattomat ja joustavat komponentit saavutetaan järjestelmä, jolla voidaan täydentää SAP R/3 tuotekustannuslaskennan puutteellisuutta.

Constant and variable amplitude fatigue strength of high strength steel welds treated with ultrasonic impact treatment

Hitsattujen rakenteiden väsymiskestävyyttä pystytään parantamaan jälkikäsittelymenetelmillä, joistayksi, ultraäänikäsittely muokkaa hitsin geometriaa ja aiheuttaa puristusjäännösjännitystilan. Tässä tutkimuksessa verrataan kokeellisesti kuormaa kantamattoman hitsatun ja ui -käsitellyn rivan väsymislujuutta toisiinsa. Tutkimusohjelmaan kuuluu kahta teräslajia ja sekä vakio - että vaihtuva - amplitudista kuormitusta. Ultraäänikäsittelyllä saavutetaan väsymiskestoiän parantuminen vakio - ja vaihtuva - amplitudisella kuormituksella. Perusaineen lujuudella ei ole merkittää vaikutusta väsymislujuuteen kun liitos on hitsatussa tilassa. Tällöin väsymiskestävyyden määrää hitsin rajaviivan jännityskeskittymä. Ultraäänikäsitellyn hitsatunliitoksen väsymiskestävyys on suurempi korkeamman lujuuden omaavilla teräksillä. Tästä syystä korkealujuuksisten terästen käyttö ultraäänikäsiteltynä väsyttävästi kuormitetuissa kevytrakenteissa on perusteltua.

Kassanhallintakäytännöt Suomen kunnissa

Kassanhallintakirjallisuus on pitkälti normatiivista tai yksittäisiä kohteita ja niiden kassanhallinnanosa-alueita tarkastelevaa case-tutkimusta. Sen sijaan kassanhallintaa laajalla tutkimuskohdejoukolla strategia- ja järjestelmävalintojen näkökulmasta tarkastelevia tutkimuksia on tehty vain vähän. Tämä suomalaista kuntakenttää tarkastelevaeksploratiivinen tutkimus antaa kuvan rakenne-, strategia- ja järjestelmävalinnoista, joita kunnat ovat painottaneet kassanhallinnassaan vuosina 2000 - 2002. Tutkimuksen metodologisena viitekehyksenä käytetty kontingenssilähestymistapaan pohjautuva konfiguratiivinen systeemimalli mahdollisti suuren tutkimuskohdejoukonstrategia- ja järjestelmäkäytäntöjen erojen kvantitatiivisen analysoinnin. Ryhmittelyanalyysin avulla tutkimusdatasta muodostui neljä strategia- ja järjestelmäpainotuksiltaan toisistaan eroavaa kuntaryhmää, ja tutkimustulokset osoittivat kuntien kassanhallintakäytäntöjen olevan hyvin samankaltaisia yksityissektorin vastaaviin käytäntöihin verrattuna; myös julkissektorin kassanhallinnassa painotetaan kustannustehokkuutta. Kustannustehokkuusstrategian rinnalla vastaajakunnat painottivat sijoitus-, lainanhoito- ja riskienhallintastrategioita sekä em. strategioiden toteuttamista tukevia rakenne- ja järjestelmävalintoja. Myös pienempienkuntien havaittiin tukeutuneen samoihin strategia- ja järjestelmäpainotuksiin kuin isommat kunnat, vaikka esim. järjestelmien käytännön tietohallintaratkaisuissa saattaa esiintyä kuntakoosta johtuvia eroja. Lisäksi joustavuusstrategian painoarvo osana kuntien kassanhallintastrategioita oli suuri. Tämä on johdonmukaista, sillä kassapositioiden ennakoimattomat muutokset edellyttävät nopeaa päätöksentekoa. Kustannustehokkuusajattelulla, kassanhoitokokonaisuuden ymmärtämisellä ja uusien kassanhoitotekniikoiden sekä rahoitusinstrumenttien selektiivisellä käytöllä on mahdollista vaikuttaa kuntien rahoituksenhoidon nettokustannuksiin.

A comparative performance study of four-pole induction motors and synchronous reluctance motors in variable speed drives

Design aspects of the Transversally Laminated Anisotropic (TLA) Synchronous Reluctance Motor (SynRM) are studied and the machine performance analysis compared to the Induction Motor (IM) is done. The SynRM rotor structure is designed and manufactured for a30 kW, four-pole, three-phase squirrel cage induction motor stator. Both the IMand SynRM were supplied by a sensorless Direct Torque Controlled (DTC) variablespeed drive. Attention is also paid to the estimation of the power range where the SynRM may compete successfully with a same size induction motor. A technicalloss reduction comparison between the IM and SynRM in variable speed drives is done. The Finite Element Method (FEM) is used to analyse the number, location and width of flux barriers used in a multiple segment rotor. It is sought for a high saliency ratio and a high torque of the motor. It is given a comparison between different FEM calculations to analyse SynRM performance. The possibility to take into account the effect of iron losses with FEM is studied. Comparison between the calculated and measured values shows that the design methods are reliable. A new application of the IEEE 112 measurement method is developed and used especially for determination of stray load losses in laboratory measurements. The study shows that, with some special measures, the efficiency of the TLA SynRM is equivalent to that of a high efficiency IM. The power factor of the SynRM at rated load is smaller than that of the IM. However, at lower partial load this difference decreases and this, probably, brings that the SynRM gets a better power factor in comparison with the IM. The big rotor inductance ratio of the SynRM allows a good estimating of the rotor position. This appears to be very advantageous for the designing of the rotor position sensor-less motor drive. In using the FEM designed multi-layer transversally laminated rotor with damper windings it is possible to design a directly network driven motor without degrading the motorefficiency or power factor compared to the performance of the IM.

Minimization of biosynthetic costs in adaptive gene expression responses of yeast to environmental changes

Yeast successfully adapts to an environmental stress by altering physiology and fine-tuning metabolism. This fine-tuning is achieved through regulation of both gene expression and protein activity, and it is shaped by various physiological requirements. Such requirements impose a sustained evolutionary pressure that ultimately selects a specific gene expression profile, generating a suitable adaptive response to each environmental change. Although some of the requirements are stress specific, it is likely that others are common to various situations. We hypothesize that an evolutionary pressure for minimizing biosynthetic costs might have left signatures in the physicochemical properties of proteins whose gene expression is fine-tuned during adaptive responses. To test this hypothesis we analyze existing yeast transcriptomic data for such responses and investigate how several properties of proteins correlate to changes in gene expression. Our results reveal signatures that are consistent with a selective pressure for economy in protein synthesis during adaptive response of yeast to various types of stress. These signatures differentiate two groups of adaptive responses with respect to how cells manage expenditure in protein biosynthesis. In one group, significant trends towards downregulation of large proteins and upregulation of small ones are observed. In the other group we find no such trends. These results are consistent with resource limitation being important in the evolution of the first group of stress responses.

La fonction publique en Suisse : analyse géopolitique d'un fédéralisme à géométrie variable

Bien que présenté comme un modèle de stabilité, le fédéralisme est constamment remis en question. Le but de l'article est de présenter quelques-unes de ses caractéristiques lues à travers les effectifs de la fonction publique en Suisse. Pour ce faire, nous distinguerons quatre types d'employeurs : Confédération, cantons, communes et corporations de droit public, lesquels représentent 10,5 % du total des actifs en Suisse. Nous analyserons la densité administrative, la variation des emplois et le degré de décentralisation selon la culture, le territoire et la religion. Il ressort que la fonction publique intermédiaire, c'est-à-dire les cantons, joue le premier rôle avec ses 140'000 emplois en équivalents plein temps (EPT) sur un total de 328'000, en hausse de 10,3 % par rapport à 2001. Les communes comptent 38 % des agents publics (+3,6 % par rapport à 2001), loin devant la Confédération, 11 % du total (en perte de vitesse : -1,2 %) et les corporations de droit public, 9 % du total (+14,5 %). Le taux d'administration est plus élevé dans la partie francophone que dans la partie germanophone, ainsi que dans les centres économiques et les zones frontières. Les écarts entre les cantons peuvent varier du simple au triple. En fait, deux modèles politico-administratifs transparaissent : le premier « cantonaliste » et davantage étatiste dans la partie latine, l'autre « communaliste » et décentralisé, dominant dans la partie germanophone. Le quotient de décentralisation administrative montre de grandes différences entre l'est et l'ouest, qui s'estompent toutefois avec la modernisation des institutions et le repositionnement de la Suisse face à l'Europe.

Persistence of Transmitted HIV-1 Drug Resistance Mutations Associated with Fitness Costs and Viral Genetic Backgrounds.

Transmission of drug-resistant pathogens presents an almost-universal challenge for fighting infectious diseases. Transmitted drug resistance mutations (TDRM) can persist in the absence of drugs for considerable time. It is generally believed that differential TDRM-persistence is caused, at least partially, by variations in TDRM-fitness-costs. However, in vivo epidemiological evidence for the impact of fitness costs on TDRM-persistence is rare. Here, we studied the persistence of TDRM in HIV-1 using longitudinally-sampled nucleotide sequences from the Swiss-HIV-Cohort-Study (SHCS). All treatment-naïve individuals with TDRM at baseline were included. Persistence of TDRM was quantified via reversion rates (RR) determined with interval-censored survival models. Fitness costs of TDRM were estimated in the genetic background in which they occurred using a previously published and validated machine-learning algorithm (based on in vitro replicative capacities) and were included in the survival models as explanatory variables. In 857 sequential samples from 168 treatment-naïve patients, 17 TDRM were analyzed. RR varied substantially and ranged from 174.0/100-person-years;CI=[51.4, 588.8] (for 184V) to 2.7/100-person-years;[0.7, 10.9] (for 215D). RR increased significantly with fitness cost (increase by 1.6[1.3,2.0] per standard deviation of fitness costs). When subdividing fitness costs into the average fitness cost of a given mutation and the deviation from the average fitness cost of a mutation in a given genetic background, we found that both components were significantly associated with reversion-rates. Our results show that the substantial variations of TDRM persistence in the absence of drugs are associated with fitness-cost differences both among mutations and among different genetic backgrounds for the same mutation.

Production costs and fruit yield profitability in the initial harvest of custard apple trees

The aim of this study was to estimate the production cost and economic indicators associated with the production and sales of fruits from 20 custard apple progenies during the initial five harvests, in order to identify the harvest season from which custard apple exploitation becomes profitable, as well as the most promising progenies from an economic point of view. The fruit yield data upon which the present work was based were obtained during the period from 2001 to 2005, in an experiment that evaluated 20 custard apple half-sibling progenies, under sprinkler irrigation. The progenies were evaluated in a random block design with five replicates and plots consisting of four plants each. The exploitation of custard apple progenies only showed to be a profitable agribusiness after the fourth year. Before that, only A3 and A4 progenies in the second year, and P3 and P11 in the third year provided profitable incomes. Considering the methodological assumptions imposed concerning the time period analysis and the prices as of July 2007, the most important profitability indicators (operating profit, return index and equilibrium price) evidenced that the A4 progeny is the most recommended, although other progenies are also highlighted, such as FJ1 and FJ2. As already discussed, the progenies showing the highest average yields of five harvests are not always the most economically recommendable ones.

Modelling additional costs caused by a new product feature

Työn tavoitteena oli mallintaa uuden tuoteominaisuuden aiheuttamat lisäkustannukset ja suunnitella päätöksenteon työkalu Timberjack Oy:n kuormatraktorivalmistuksen johtoryhmälle. Tarkoituksena oli luoda karkean tason malli, joka sopisi eri tyyppisten tuoteominaisuuksien kustannuksien selvittämiseen. Uuden tuoteominaisuuden vaikutusta yrityksen eri toimintoihin selvitettiin haastatteluin. Haastattelukierroksen tukena käytettiin kysymyslomaketta. Haastattelujen tavoitteena oli selvittää prosessit, toiminnot ja resurssit, jotka ovat välttämättömiä uuden tuoteominaisuuden tuotantoon saattamisessa ja tuotannossa. Malli suunniteltiin haastattelujen ja tietojärjestelmästä hankitun tiedon pohjalta. Mallin rungon muodostivat ne prosessit ja toiminnot, joihin uudella tuoteominaisuudella on vaikutusta. Huomioon otettiin sellaiset resurssit, joita uusi tuoteominaisuus kuluttaa joko välittömästi, tai välillisesti. Tarkasteluun sisällytettiin ainoastaan lisäkustannukset. Uuden tuoteominaisuuden toteuttamisesta riippumattomat, joka tapauksessa toteutuvat yleiskustannukset jätettiin huomioimatta. Malli on yleistys uuden tuoteominaisuuden aiheuttamista lisäkustannuksista, koska tarkoituksena on, että se sopii eri tyyppisten tuoteominaisuuksien aiheuttamien kustannusten selvittämiseen. Lisäksi malli soveltuu muiden pienehköjen tuotemuutosten kustannusten kartoittamiseen.