Determination of Cd and Pb in fuel ethanol by filter furnace electrothermal atomic absorption spectrometry

A method was developed for quantification of Cd and Pb in ethanol fuel by filter furnace atomic absorption spectrometry. Filter furnace was used to eliminate the need for chemical modification, to stabilize volatile analytes and to allow the application of short pyrolysis step. The determinations in samples were carried out against calibration solutions prepared in ethanol. Recovery tests were made in seven commercial ethanol fuel samples with values between 90 and 120%. Limits of detection were 0.1 µg L-1 for Cd and 0.3 µg L-1 for Pb. Certified water samples (APS 1071, APS 1033, NIST 1643d, NIST 1640) were also used to evaluate accuracy and recoveries from 86.8% to115% were obtained.

Aerosol particle size distributions at a traffic exposed site and an urban background location in Oporto, Portugal

Aerosol size distributions from 6 to 700 nm were measured simultaneously at an urban background site and a roadside station in Oporto. The particle number concentration was higher at the traffic exposed site, where up to 90% of the size spectrum was dominated by the nucleation mode. Larger aerosol mode diameters were observed in the urban background site possibly due to the coagulation processes or uptake of gases during transport. Factor analysis has shown that road traffic and the neighbour stationary sources localised upwind affect the urban area thought intra-regional pollutant transport.

Diesel/biodiesel soot oxidation with ceo2 and ceo2-zro2-modified cordierites: a facile way of accounting for their catalytic ability in fuel combustion processes

CeO2 and mixed CeO2-ZrO2 nanopowders were synthesized and efficiently deposited onto cordierite substrates, with the evaluation of their morphologic and structural properties through XRD, SEM, and FTIR. The modified substrates were employed as outer heterogeneous catalysts for reducing the soot originated from the diesel and diesel/biodiesel blends incomplete combustion. Their activity was evaluated in a diesel stationary motor, and a comparative analysis of the soot emission was carried out through diffuse reflectance spectroscopy. The analyses have shown that the catalyst-impregnated cordierite samples are very efficient for soot oxidation, being capable of reducing the soot emission in more than 60%.

Certified reference material to water content determination in bioethanol fuel

Bioethanol is a strategic biofuel in Brazil. Thus, a strong metrological basis for its measurements is required to ensure the quality and promote its exportation. Recently, Inmetro certified a reference material for water content in bioethanol. This paper presents the results of these studies. The characterization, homogeneity, short-term stability and long-term stability uncertainty contributions values were 0.00500, 0.0166, 0.0355 and 0.0391 mg g-1, respectively. The certificated value for water content of bioethanol fuel was (3.65 ± 0.11) mg g-1. This CRM is the first and up to now the unique in the world.

Determination of Copper, Iron, Nickel and Zinc in fuel kerosene by FAAS after adsorption and pre-concentration on 2-aminothiazole-modified silica gel

Silica gel chemically modified with 2-Aminotiazole groups, abbreviated as SiAT, was used for preconcentration of copper, zinc, nickel and iron from kerosene, normally used as a engine fuel for airplanes. Surface characteristics and surface area of the silica gel were obtained before and after chemical modification using FT-IR, Kjeldhal and surface area analysis (B.E.T.). The retention and recovery of the analyte elements were studied by applying batch and column techniques. The experimental parameters, such as shaking time in batch technique, flow rate and concentration of the eluent (HCl- 0.25-2.00 mol L-1) and the amount of silica, on retention and elution, have been investigated. Detection limits of the method for copper, iron, nickel and zinc are 0.77, 2.92, 1.73 and 0.097 mg L-1, respectively. The sorption-desorption of the studied metal ions made possible the development of a preconcentration method for metal ions at trace level in kerosene using flame AAS for their quantification.

Traffic flow development at North European company level with respect of China and Russia

The aim of the thesis is to analyze traffic flows and its development from North European companies` point of view to China and Russia using data from logistics questionnaire. Selected North European companies are large Finnish and Swedish companies. The questionnaire was sent via email to the target group. The study is based on the answers got from respondent companies from years 2006, 2009 and 2010. In the thesis Finnish Talouselämä newspaper and Swedish Affärsdata are used as a database to find the target companies for the survey. Respondents were most often logistics managers in companies. In the beginning of the thesis concepts of transportation logistics is presented, including container types, trade terms, axel loads in roads and in railways. Also there is information about warehousing types and terminals. After that, general information of Chinese and Russian transportation logistics is presented. Chinese and Russian issues are discussed in two sections. In both of them it is analyzed economic development, freight transport and trade balance. Some practical examples of factory inaugurations in China and Russia are presented that Finnish and Swedish companies have completed. In freight transport section different transportation modes, logistics outsourcing and problems of transportation logistics is discussed. The results of the thesis show that transportation flows between Europe and China is changing. Freight traffic from China to European countries will strengthen even more from the current base. When it comes to Russia and Europe, traffic flows seem to be changing from eastbound traffic to westbound traffic. It means that in the future it is expected more freight traffic from Russia to Europe. Some probable reasons for that are recent factory establishments in Russia and company interviews support also this observation. Effects of the economic recession are mainly seen in the lower transportation amounts in 2009.

Cargo Traffic on the Helsinki-Tallinn Route

The twin-city model has found to increase economical activity and well-being. The similar economical, social and cultural background of Finland and Estonia as well as the EU integration give good preconditions to create a twin-city of Helsinki and Tallinn. The relatively long distance between Helsinki and Tallinn is challenging. Therefore, good transport infrastructure and functioning connections are required to form a twin-city of Helsinki and Tallinn. The connections between these cities can be considered also in broader perspective than only from the viewpoint of the twin-city concept. New markets areas have been emerged in Europe due to collapse of planned economy and integration of Europe. Also the transport routes to the markets are changing. The Hel-sinki-Tallinn sea route can be considered as a fast route to the new markets in the Cen-tral and Eastern Europe. The Helsinki-Tallinn sea route is also a potential route to the Western European markets. This study provides an analysis of transport and cargo flows between Finland and Esto-nia for regional and local planners. The main purpose of the study is to clarify the pre-sent situation of the seaborne cargo flows on the Helsinki-Tallinn route and how the cargo flows will develop in the future. The study focuses on the following thematic enti-ties: the Finnish and Estonian seaborne transport system and cargo flows, the structure and volume of the cargo flows on the Helsinki-Tallinn route, the hinterland cargo flows on the Helsinki-Tallinn route and the transport methods used on the Helsinki-Tallinn route. The study was carried out as a desk research, a statistical analysis and an inter-view study during the spring–autumn 2011. The study reveals that during the period 2002–2010 the volume of the seaborne cargo traffic between Finland and Estonia has increased significantly while the trend of the trade volume between Finland and Estonia has remained nearly constant. This indicates that the route via Estonia is increasingly used in the Finnish foreign trade. Because the ports of Helsinki and Tallinn are the main ports in the cargo traffic between Finland and Estonia, the role of the Helsinki-Tallinn route as a sea leg in the hinterland connections of Finland has increased. The growth of the cargo volume on the Helsinki-Tallinn route was estimated to continue on the annual level of 10 % during the next couple of years. In the long run the growth of the cargo volumes depends on the economical and indus-trial development of the former Eastern European countries. If the IMO’s sulphur regu-lations will come in force, the Helsinki-Tallinn route will become one of the main routes also to the Western European markets, besides of the route via Sweden. The study also shows that the fast and reliable connections year round on the Helsinki-Tallinn route have made it possible for service and logistics companies to reconsider their logistics strategies in a new way in the both side of the Gulf of Finland. Anyway, the ropax concept is seen as the only economical profitable solution on the Helsinki-Tallinn route because cargo and passenger traffic are supporting each other. The trucks (vehicle combinations) will remain the main mode of transport on the Helsinki-Tallinn route because general cargo is the main commodity on the route. IMO’s sulphur regula-tions and the changes in the structure of the Finnish industry may create prerequisites for rail road transport in the hinterland connections of Finland. The twin-city model has found to increase economical activity and well-being. The similar economical, social and cultural background of Finland and Estonia as well as the EU integration give good preconditions to create a twin-city of Helsinki and Tallinn. The relatively long distance between Helsinki and Tallinn is challenging. Therefore, good transport infrastructure and functioning connections are required to form a twin-city of Helsinki and Tallinn. The connections between these cities can be considered also in broader perspective than only from the viewpoint of the twin-city concept. New markets areas have been emerged in Europe due to collapse of planned economy and integration of Europe. Also the transport routes to the markets are changing. The Hel-sinki-Tallinn sea route can be considered as a fast route to the new markets in the Cen-tral and Eastern Europe. The Helsinki-Tallinn sea route is also a potential route to the Western European markets. This study provides an analysis of transport and cargo flows between Finland and Esto-nia for regional and local planners. The main purpose of the study is to clarify the pre-sent situation of the seaborne cargo flows on the Helsinki-Tallinn route and how the cargo flows will develop in the future. The study focuses on the following thematic enti-ties: the Finnish and Estonian seaborne transport system and cargo flows, the structure and volume of the cargo flows on the Helsinki-Tallinn route, the hinterland cargo flows on the Helsinki-Tallinn route and the transport methods used on the Helsinki-Tallinn route. The study was carried out as a desk research, a statistical analysis and an inter-view study during the spring–autumn 2011. The study reveals that during the period 2002–2010 the volume of the seaborne cargo traffic between Finland and Estonia has increased significantly while the trend of the trade volume between Finland and Estonia has remained nearly constant. This indicates that the route via Estonia is increasingly used in the Finnish foreign trade. Because the ports of Helsinki and Tallinn are the main ports in the cargo traffic between Finland and Estonia, the role of the Helsinki-Tallinn route as a sea leg in the hinterland connections of Finland has increased. The growth of the cargo volume on the Helsinki-Tallinn route was estimated to continue on the annual level of 10 % during the next couple of years. In the long run the growth of the cargo volumes depends on the economical and indus-trial development of the former Eastern European countries. If the IMO’s sulphur regu-lations will come in force, the Helsinki-Tallinn route will become one of the main routes also to the Western European markets, besides of the route via Sweden. The study also shows that the fast and reliable connections year round on the Helsinki-Tallinn route have made it possible for service and logistics companies to reconsider their logistics strategies in a new way in the both side of the Gulf of Finland. Anyway, the ropax concept is seen as the only economical profitable solution on the Helsinki-Tallinn route because cargo and passenger traffic are supporting each other. The trucks (vehicle combinations) will remain the main mode of transport on the Helsinki-Tallinn route because general cargo is the main commodity on the route. IMO’s sulphur regula-tions and the changes in the structure of the Finnish industry may create prerequisites for rail road transport in the hinterland connections of Finland.

Microgeneration of electricity with producer gas in dual fuel mode operation

Among the alternatives to meet the increasing of world demand for energy, the use of biomass as energy source is one of the most promising as it contributes to reducing emissions of carbon dioxide in the atmosphere. Gasification is a technological process of biomass energy production of a gaseous biofuel. The fuel gas has a low calorific value that can be used in Diesel engine in dual mode for power generation in isolated communities. This study aimed to evaluate the reduction in the consumption of oil Diesel an engine generator, using gas from gasification of wood. The engine generator brand used was a BRANCO, with direct injection power of 7.36 kW (10 HP) coupled to an electric generator 5.5 kW. Diesel oil mixed with intake air was injected, as the oil was injected via an injector of the engine (dual mode). The fuel gas was produced in a downdraft gasifier. The engine generator was put on load system from 0.5 kW to 3.5 kW through a set of electrical resistances. Diesel oil consumption was measured with a precision scale. It was concluded that the engine converted to dual mode when using the gas for the gasification of wood decreased Diesel consumption by up to 57%.

Fuel consumption of a tractor in function of wear, of ballasting and tire inflation pressure

When using appropriate inflation pressures and load capacity (ballast), it may obtain a higher yield and prolongation of the life of the tire, besides it may minimize the problems of loss of traction, increased slippage and fuel consumption. This study aimed to evaluate the fuel consumption of a tractor operating with new and worn tires in three conditions of ballasting and three inflation pressures, when driving on compacted soil with vegetation cover. The experiment was conducted at the experimental unit from the Department of Animal Science, Federal University of Lavras, state of Minas Gerais, Brazil, in an agricultural soil compacted by cattle trampling and with vegetation cover. It was used a tractor 4x2 with front wheel assist, of a 65.62 kW engine power. The tires were of R1 type, diagonal (front: 12.4 to 24; and rear: 18.4 to 30), the average height of the clutches of the new tires were 0.3 and 0.35 m for front and rear tires, respectively, and for the worn tires were 0.018 and 0.0045 m, for the front and the rear tires, respectively. The results showed advantages for the tractor equipped with new tires.