Silica fouling in high salinity waters in reverse osmosis desalination (sodium-silica system)

Silica fouling patterns in a sodium–silica system and the effect of pH on residual dissolved silica concentrations are reported. The unique chemical affinity between sodium and silica (SO4) prevented silica scale deposition on the membrane surface during reverse osmosis (RO) desalination. It was found that high concentrations of sodium in solutions depressed silica solubility to 81–84 mg L−1 for a maximum NaCl salinity of 60–65 g L−1. Using a range of membrane examination techniques, it was found that no silica scale formed on the RO membrane surfaces from NaCl solutions free from cations such as Ca, Al and Fe. This was considered to be the result of sodium ions acting as a barrier between polymeric silica and the membrane surface.

A qualitative examination of major barriers in implementation of reverse logistics within the South Australian construction sector

Despite extensive research on the benefits of reverse logistics (RL), it has yet to become commonplace in the construction industry. Furthermore, the uptake and number of studies on RL remains very limited within the Australian context and particularly related to the construction industry. This paper is aimed at filling that knowledge gap by employing an exploratory approach to examine the critical barriers faced by South Australian construction organizations in implementing RL practices. Semi-structured interviews and a ranking approach facilitated the treatment of qualitative data through quantitative coding using cloud-based applications. The research identified 12 barriers to RL implementation, four of them very significant according to the responses of the interviewees: the regulatory environment, additional costs involved, lack of recognition in the construction supply chain, and extra effort required. The study also explored their inter-relationships through the Co-occurrence Index. The study proposes some remedial measures for RL implementation in South Australia based on the barriers identified.

Reverse convertible bonds

I convertible bonds sono degli strumenti finanziari che conferiscono al suo possessore la facoltà di scegliere se, una volta scaduta l'obbligazione, essere rimborsato tramite una somma di denaro (valore nominale) oppure convertire l'obbligazione in un numero predefinito di azioni. Successivamente si è trattato l’argomento della tesi, i reverse convertible bonds. Queste obbligazioni sono simili ai convertible bonds con la differenza che in tal caso il diritto di scegliere se convertire o meno l'obbligazione in azioni è lasciato all'emittente e non al sottoscrittore. I reverse convertible si ottengono dalla combinazione di un coupon bond ordinario (senza l'opzione di conversione) a breve termine e di un'opzione put sulle azioni sottostanti. E' stata analizzata la formula di valutazione dei reverse convertible bonds, data dalla differenza tra il prezzo di un coupon-bond ordinario emesso dalla stessa società e il prezzo di un'opzione put (quest'ultimo moltiplicato per il rapporto di conversione, ossia per il numero di azioni che si ottengono dalla conversione di ciascuna obbligazione convertibile). E’ stata poi fatta un’analisi empirica dei prezzi dei reverse convertible bonds. Sono stati calcolati i prezzi di 7 reverse convertible utilizzando i dati forniti dal database finanziario e macroeconomico, Thomson Reuters Datastream.I prezzi calcolati sono stati poi confrontati con i prezzi di mercato di tali obbligazioni relativamente allo stesso istante temporale, il giorno 6/6/2016.

Tecniche geomatiche di reverse engineering nel campo dei Beni Culturali

La salvaguardia e conservazione del Patrimonio Artistico ed Architettonico rappresentano un aspetto imprescindibile di ogni cultura, e trovano le loro fondamenta nella coscienza e conoscenza dei Beni. Il rilievo è l’operazione basilare per acquisire una conoscenza rigorosa di un oggetto nella sua geometria e in altre sue caratteristiche. Le finalità delle operazioni di rilevamento sono molteplici, dall’archiviazione a scopo di documentazione fino all’indagine conservativa volta alla diagnostica e alla progettazione di interventi. I modelli digitali, introdotti dallo sviluppo tecnologico degli ultimi decenni, permettono una perfetta conoscenza del bene, non necessitano di contatto diretto durante la fase di rilevamento e possono essere elaborati secondo le esigenze del caso. Le tecniche adottate nel Reverse Engineering si differenziano per il tipo di sensore utilizzato: quelle fotogrammetriche utilizzano sensori di tipo “passivo” e trovano oggi largo impiego nel settore dei Beni Culturali grazie agli strumenti di Structure from Motion, mentre strumenti basati su sensori di tipo “attivo” utilizzano Laser o proiezione di luce strutturata e sono in grado di rilevare con grande precisione geometrie anche molto complesse. La costruzione del modello della fontana del Nettuno e della torre Garisenda di Bologna costituiscono un valido esempio di applicazione delle tecniche di rilievo digitale, e dimostrano la validità delle stesse su oggetti di diversa dimensione in due diversi ambiti applicativi: il restauro e il monitoraggio. Gli sviluppi futuri del Reverse Engineering in questo ambito sono molteplici, e la Geomatica rappresenta senza dubbio una disciplina fondamentale per poterli realizzare.

Conformational states of HIV-1 reverse transcriptase for nucleotide incorporation vs. pyrophosphorolysis – binding of foscarnet

HIV-1 reverse transcriptase (RT) catalytically incorporates individual nucleotides into a viral DNA strand complementing an RNA or DNA template strand; the polymerase active site of RT adopts multiple conformational and structural states while performing this task. The states associated are dNTP binding at the N site, catalytic incorporation of a nucleotide, release of a pyrophosphate, and translocation of the primer 3′-end to the P site. Structural characterization of each of these states may help in understanding the molecular mechanisms of drug activity and resistance and in developing new RT inhibitors. Using a 38-mer DNA template-primer aptamer as the substrate mimic, we crystallized an RT/dsDNA complex that is catalytically active, yet translocation-incompetent in crystals. The ability of RT to perform dNTP binding and incorporation in crystals permitted obtaining a series of structures: (I) RT/DNA (P-site), (II) RT/DNA/AZTTP ternary, (III) RT/AZT-terminated DNA (N-site), and (IV) RT/AZT-terminated DNA (N-site)/foscarnet complexes. The stable N-site complex permitted the binding of foscarnet as a pyrophosphate mimic. The Mg2+ ions dissociated after catalytic addition of AZTMP in the pretranslocated structure III, whereas ions A and B had re-entered the active site to bind foscarnet in structure IV. The binding of foscarnet involves chelation with the Mg2+ (B) ion and interactions with K65 and R72. The analysis of interactions of foscarnet and the recently discovered nucleotide-competing RT inhibitor (NcRTI) α-T-CNP in two different conformational states of the enzyme provides insights for developing new classes of polymerase active site RT inhibitors.

A dynamic pricing reverse auction-based resource allocation mechanism in cloud workflow systems

Market-oriented reverse auction is an efficient and cost-effective method for resource allocation in cloud workflow systems since it can dynamically allocate resources depending on the supply-demand relationship of the cloud market. However, during the auction the price of cloud resource is usually fixed, and the current resource allocation mechanisms cannot adapt to the changeable market properly which results in the low efficiency of resource utilization. To address such a problem, a dynamic pricing reverse auction-based resource allocation mechanism is proposed. During the auction, resource providers can change prices according to the trading situation so that our novel mechanism can increase the chances of making a deal and improve efficiency of resource utilization. In addition, resource providers can improve their competitiveness in the market by lowering prices, and thus users can obtain cheaper resources in shorter time which would decrease monetary cost and completion time for workflow execution. Experiments with different situations and problem sizes are conducted for dynamic pricing-based allocation mechanism (DPAM) on resource utilization and the measurement of Time∗Cost (TC). The results show that our DPAM can outperform its representative in resource utilization, monetary cost, and completion time and also obtain the optimal price reduction rates.

Analisi multi-obiettivo in ottica lean-green della reverse logistics dei veicoli a fine vita (ELV)

La gestione del fine vita dei prodotti è un argomento di interesse attuale per le aziende; sempre più spesso l’imprese non possono più esimersi dall’implementare un efficiente sistema di Reverse Logistics. Per rispondere efficacemente a queste nuove esigenze diventa fondamentale ampliare i tradizionali sistemi logistici verso tutte quelle attività svolte all’interno della Reverse Logitics. Una gestione efficace ed efficiente dell’intera supply chain è un aspetto di primaria importanza per un’azienda ed incide notevolmente sulla sua competitività; proprio per perseguire questo obiettivo, sempre più aziende promuovono politiche di gestione delle supply chain sia Lean che Green. L’obiettivo di questo lavoro, nato dalle esigenze descritte sopra, è quello di applicare un modello innovativo che consideri sia politiche di gestione Lean, che dualmente politiche Green, alla gestione di una supply chain del settore automotive, comprendente anche le attività di gestione dei veicoli fuori uso (ELV). Si è analizzato per prima cosa i principi base e gli strumenti utilizzati per l’applicazione della Lean Production e del Green supply chain management e in seguito si è analizzato le caratteristiche distintive della Reverse Logistics e in particolare delle reti che trattano i veicoli a fine vita. L’obiettivo finale dello studio è quello di elaborare e implementare, tramite l’utilizzo del software AMPL, un modello di ottimizzazione multi-obiettivo (MOP- Multi Objective Optimization) Lean e Green a una Reverse Supply Chain dei veicoli a fine vita. I risultati ottenuti evidenziano che è possibile raggiungere un ottimo compromesso tra le due logiche. E' stata effettuata anche una valutazione economica dei risultati ottenuti, che ha evidenziato come il trade-off scelto rappresenti anche uno degli scenari con minor costi.

Creative design and the generative evolutionary paradigm

Design as seen from the designer's perspective is a series of amazing imaginative jumps or creative leaps. But design as seen by the design historian is a smooth progression or evolution of ideas that they seem self-evident and inevitable after the event. But the next step is anything but obvious for the artist/creator/inventor/designer stuck at that point just before the creative leap. They know where they have come from and have a general sense of where they are going, but often do not have a precise target or goal. This is why it is misleading to talk of design as a problem-solving activity - it is better defined as a problem-finding activity. This has been very frustrating for those trying to assist the design process with computer-based, problem-solving techniques. By the time the problem has been defined, it has been solved. Indeed the solution is often the very definition of the problem. Design must be creative-or it is mere imitation. But since this crucial creative leap seem inevitable after the event, the question must arise, can we find some way of searching the space ahead? Of course there are serious problems of knowing what we are looking for and the vastness of the search space. It may be better to discard altogether the term "searching" in the context of the design process: Conceptual analogies such as search, search spaces and fitness landscapes aim to elucidate the design process. However, the vastness of the multidimensional spaces involved make these analogies misguided and they thereby actually result in further confounding the issue. The term search becomes a misnomer since it has connotations that imply that it is possible to find what you are looking for. In such vast spaces the term search must be discarded. Thus, any attempt at searching for the highest peak in the fitness landscape as an optimal solution is also meaningless. Futhermore, even the very existence of a fitness landscape is fallacious. Although alternatives in the same region of the vast space can be compared to one another, distant alternatives will stem from radically different roots and will therefore not be comparable in any straightforward manner (Janssen 2000). Nevertheless we still have this tantalizing possibility that if a creative idea seems inevitable after the event, then somehow might the process be rserved? This may be as improbable as attempting to reverse time. A more helpful analogy is from nature, where it is generally assumed that the process of evolution is not long-term goal directed or teleological. Dennett points out a common minsunderstanding of Darwinism: the idea that evolution by natural selection is a procedure for producing human beings. Evolution can have produced humankind by an algorithmic process, without its being true that evolution is an algorithm for producing us. If we were to wind the tape of life back and run this algorithm again, the likelihood of "us" being created again is infinitesimally small (Gould 1989; Dennett 1995). But nevertheless Mother Nature has proved a remarkably successful, resourceful, and imaginative inventor generating a constant flow of incredible new design ideas to fire our imagination. Hence the current interest in the potential of the evolutionary paradigm in design. These evolutionary methods are frequently based on techniques such as the application of evolutionary algorithms that are usually thought of as search algorithms. It is necessary to abandon such connections with searching and see the evolutionary algorithm as a direct analogy with the evolutionary processes of nature. The process of natural selection can generate a wealth of alternative experiements, and the better ones survive. There is no one solution, there is no optimal solution, but there is continuous experiment. Nature is profligate with her prototyping and ruthless in her elimination of less successful experiments. Most importantly, nature has all the time in the world. As designers we cannot afford prototyping and ruthless experiment, nor can we operate on the time scale of the natural design process. Instead we can use the computer to compress space and time and to perform virtual prototyping and evaluation before committing ourselves to actual prototypes. This is the hypothesis underlying the evolutionary paradigm in design (1992, 1995).

Space frame walls : facilitating positive development

This paper reports on progress in developing new design and measurement concepts, and translating these concepts into practical applications. This research addresses gaps in ‘best practice’ green building, and is aimed ultimately at replacing green buildings with sustainable urban environments. Building on the author’s previously articulated concepts of Design for Eco-services and Positive Development, this research will demonstrate how to eco-retrofit cities so that they reverse the negative impacts of past design and generate net positive ecological impacts, at no extra cost. In contrast to ‘restorative’ design,this means increasing ecological carrying capacity and natural and social capital through built environment design. Some exemplars for facilitating Positive development will be presented in this talk,such as Green Scaffolding for retrofits, and Green Space Walls for new construction. These structures have been designed to grow and change over time, be easily deconstructed, and entail little waste. The frames support mini-ecospheres that provide a wide range of ecosystem services and biodiversity habitats, as well as heating, cooling and ventilating. In combination, the modules serve to improve human and environmental health. Current work is focused on developing a range of such space frame walls, optimised through an innovative marriage of eco-logical design and virtual modelling.

Validation of 3D models of the outer and inner surfaces of an ovine femur

The validation of Computed Tomography (CT) based 3D models takes an integral part in studies involving 3D models of bones. This is of particular importance when such models are used for Finite Element studies. The validation of 3D models typically involves the generation of a reference model representing the bones outer surface. Several different devices have been utilised for digitising a bone’s outer surface such as mechanical 3D digitising arms, mechanical 3D contact scanners, electro-magnetic tracking devices and 3D laser scanners. However, none of these devices is capable of digitising a bone’s internal surfaces, such as the medullary canal of a long bone. Therefore, this study investigated the use of a 3D contact scanner, in conjunction with a microCT scanner, for generating a reference standard for validating the internal and external surfaces of a CT based 3D model of an ovine femur. One fresh ovine limb was scanned using a clinical CT scanner (Phillips, Brilliance 64) with a pixel size of 0.4 mm2 and slice spacing of 0.5 mm. Then the limb was dissected to obtain the soft tissue free bone while care was taken to protect the bone’s surface. A desktop mechanical 3D contact scanner (Roland DG Corporation, MDX 20, Japan) was used to digitise the surface of the denuded bone. The scanner was used with the resolution of 0.3 × 0.3 × 0.025 mm. The digitised surfaces were reconstructed into a 3D model using reverse engineering techniques in Rapidform (Inus Technology, Korea). After digitisation, the distal and proximal parts of the bone were removed such that the shaft could be scanned with a microCT (µCT40, Scanco Medical, Switzerland) scanner. The shaft, with the bone marrow removed, was immersed in water and scanned with a voxel size of 0.03 mm3. The bone contours were extracted from the image data utilising the Canny edge filter in Matlab (The Mathswork).. The extracted bone contours were reconstructed into 3D models using Amira 5.1 (Visage Imaging, Germany). The 3D models of the bone’s outer surface reconstructed from CT and microCT data were compared against the 3D model generated using the contact scanner. The 3D model of the inner canal reconstructed from the microCT data was compared against the 3D models reconstructed from the clinical CT scanner data. The disparity between the surface geometries of two models was calculated in Rapidform and recorded as average distance with standard deviation. The comparison of the 3D model of the whole bone generated from the clinical CT data with the reference model generated a mean error of 0.19±0.16 mm while the shaft was more accurate(0.08±0.06 mm) than the proximal (0.26±0.18 mm) and distal (0.22±0.16 mm) parts. The comparison between the outer 3D model generated from the microCT data and the contact scanner model generated a mean error of 0.10±0.03 mm indicating that the microCT generated models are sufficiently accurate for validation of 3D models generated from other methods. The comparison of the inner models generated from microCT data with that of clinical CT data generated an error of 0.09±0.07 mm Utilising a mechanical contact scanner in conjunction with a microCT scanner enabled to validate the outer surface of a CT based 3D model of an ovine femur as well as the surface of the model’s medullary canal.

Self-talk in upper primary school children : its relationship with irrational beliefs, self-esteem and depression

Self-talk, irrational beliefs, self-esteem and depression were measured in a sample of 105 elementary school children in Grades 4 to 7. Sex and grade differences in positive self-talk were found. The pattern of correlation coefficients for positive self-talk supported the substantive position that positive self-talk is positively related to self-esteem and negatively related to irrational beliefs and depression in a non-clinical sample of children. However, the same support was not forthcoming for the reverse relationships for negative self-talk. Therapeutic implications are outlined as are suggestions for future research in the area of children's self-talk.

Multilineage differentiation potential of bone and cartilage cells derived from explant culture

To date, mesenchymal stem cells (MSCs) from various tissues have been reported, but the yield and differentiation potential of different tissue-derived MSCs is still not clear. This study was undertaken in an attempt to investigate the multilineage stem cell potential of bone and cartilage explant cultures in comparison with bone marrow derived mesenchymal stem cells (BMSCs). The results showed that the surface antigen expression of tissue-derived cells was consistent with that of mesenchymal stem cells, such as lacking the haematopoietic and common leukocyte markers (CD34, CD45) while expressing markers related to adhesion (CD29, CD166) and stem cells (CD90, CD105). The tissue-derived cells were able to differentiate into osteoblast, chondrocyte and adipocyte lineage pathways when stimulated in the appropriate differentiating conditions. However, compared with BMSCs, tissue-derived cells showed less capacity for multilineage differentiation when the level of differentiation was assessed in monolayer culture by analysing the expression of tissue-specific genes by reverse transcription polymerase chain reaction (RT-PCR) and histology. In high density pellet cultures, tissue-derived cells were able to differentiate into chondrocytes, expressing chondrocyte markers such as proteoglycans, type II collagen and aggrecan. Taken together, these results indicate that cells derived from tissue explant cultures reserved certain degree of differentiation properties of MSCs in vitro.

Enhanced human bone marrow stromal cell affinity for modified poly(L-lactide) surfaces by the upregulation of adhesion molecular genes

To enhance and regulate cell affinity for poly (l-lactic acid) (PLLA) based materials, two hydrophilic ligands, poly (ethylene glycol) (PEG) and poly (l-lysine) (PLL), were used to develop triblock copolymers: methoxy-terminated poly (ethylene glycol)-block-poly (l-lactide)-block-poly (l-lysine) (MPEG-b-PLLA-b-PLL) in order to regulate protein absorption and cell adhesion. Bone marrow stromal cells (BMSCs) were cultured on different composition of MPEG-b-PLLA-b-PLL copolymer films to determine the effect of modified polymer surfaces on BMSC attachment. To understand the molecular mechanism governing the initial cell adhesion on difference polymer surfaces, the mRNA expression of 84 human extracellular matrix (ECM) and adhesion molecules was analysed using quantitative reverse transcriptase polymerase chain reaction (qRT-PCR). It was found that down regulation of adhesion molecules was responsible for the impaired BMSC attachment on PLLA surface. MPEG-b-PLLA-b-PLL copolymer films improved significantly the cell adhesion and cytoskeleton expression by upregulation of relevant molecule genes significantly. Six adhesion genes (CDH1, ITGL, NCAM1, SGCE, COL16A1, and LAMA3) were most significantly influenced by the modified PLLA surfaces. In summary, polymer surfaces altered adhesion molecule gene expression of BMSCs, which consequently regulated cell initial attachment on modified PLLA surfaces.

‘Live your liberation, don’t lobby for it’ : Australian queer student activists’ perspectives of same-sex marriage

One topic covered in Australian queer university student print media is the legalisation of same-sex marriage. The legalisation of same-sex marriage is currently generating much debate in Western queer communities. Same-sex marriage is legalised in some countries such as, Canada, Spain, the Netherlands and Belgium. It has been outlawed in Australia and most states in the US. Campaigns continue to reverse these restrictions. Other countries, such as the UK and New Zealand allow same-sex civil unions, providing couples with the rights afforded to married couples. There is a range of research documenting queer communities’ attitudes towards this issue (for example Lannutti 2005; Clarke, Burgoyne and Burns 2006; Yep, Lovaas and Elia 2003; Wolfson 1993; Egan and Sherrill 2005). These studies document broad community views as well as those of community sub-sections. For example, Yip (2004) looks at the views of gay and lesbian Christians on same-sex marriage and Lahey and Alderson (2004) document the experiences of same-sex couples who have gotten married or who are waiting to get married. Philosophical analyses consider the legalisation of same-sex marriage in relation to, for example, liberalism, equal rights, liberation, queer theory, citizenship, history, activism, religious discourse and feminism (Ferguson 2007; Jordan 2005; Josephson 2005; Lipton 2006; Sullivan and Chauncey 2005; Riggs 2007). This paper explores Australian queer university student activist media’s representation of same-sex marriage, and the debates surrounding its legalisation. It examines a selection of queer student media from four metropolitan Australian universities, and the 2003 and 2004 editions of national queer student publication, Querelle. This paper uses discourse analysis of queer student activists’ media representations of marriage to investigate this issue in one specific context – metropolitan Australian universities. This paper thus contributes to the history of queer activism, documenting what one group of young people say about the legalisation of same-sex marriage, and furthers research on queer perspectives of marriage and same-sex relationships.