Differences in habitat use of two sympatric species of Ameiva in East Costa Rica

Identifying the differences in habitat use for sympatric species is important for understanding the species preferences and the limits of population distribution. We studied the differences in the habitat use of two understudied sympatric species of Ameiva (A. festiva and A. quadrilineata) in a natural reserve of the Caribbean coast of Coast Rica. Ameiva quadrilineata showed a more restrictive habitat use pattern than A. festiva. A. quadrilineata's smaller body size may be one of the factors limiting its habitat range. Both species showed higher density in regenerated forests, while A. quadrilineata was never found in swamp forests. The air temperature and the meteorological condition at the moment of the survey also influenced the occurrence of the A. quadrilineata, while the juveniles of A. festiva were only affected by the meteorological condition. None of the studied variables seemed to affect the occurrence of A. festiva adults. The results of this study can be useful to evaluate possible changes in the species distribution patterns as a consequence of direct (i.e., deforestation) or indirect (i.e., climate change) human activities in the distribution area of these species.

Evaluation of reference-based two-color methods for measurement of gene expression ratios using spotted cDNA microarrays

Abstract Background Spotted cDNA microarrays generally employ co-hybridization of fluorescently-labeled RNA targets to produce gene expression ratios for subsequent analysis. Direct comparison of two RNA samples in the same microarray provides the highest level of accuracy; however, due to the number of combinatorial pair-wise comparisons, the direct method is impractical for studies including large number of individual samples (e.g., tumor classification studies). For such studies, indirect comparisons using a common reference standard have been the preferred method. Here we evaluated the precision and accuracy of reconstructed ratios from three indirect methods relative to ratios obtained from direct hybridizations, herein considered as the gold-standard. Results We performed hybridizations using a fixed amount of Cy3-labeled reference oligonucleotide (RefOligo) against distinct Cy5-labeled targets from prostate, breast and kidney tumor samples. Reconstructed ratios between all tissue pairs were derived from ratios between each tissue sample and RefOligo. Reconstructed ratios were compared to (i) ratios obtained in parallel from direct pair-wise hybridizations of tissue samples, and to (ii) reconstructed ratios derived from hybridization of each tissue against a reference RNA pool (RefPool). To evaluate the effect of the external references, reconstructed ratios were also calculated directly from intensity values of single-channel (One-Color) measurements derived from tissue sample data collected in the RefOligo experiments. We show that the average coefficient of variation of ratios between intra- and inter-slide replicates derived from RefOligo, RefPool and One-Color were similar and 2 to 4-fold higher than ratios obtained in direct hybridizations. Correlation coefficients calculated for all three tissue comparisons were also similar. In addition, the performance of all indirect methods in terms of their robustness to identify genes deemed as differentially expressed based on direct hybridizations, as well as false-positive and false-negative rates, were found to be comparable. Conclusion RefOligo produces ratios as precise and accurate as ratios reconstructed from a RNA pool, thus representing a reliable alternative in reference-based hybridization experiments. In addition, One-Color measurements alone can reconstruct expression ratios without loss in precision or accuracy. We conclude that both methods are adequate options in large-scale projects where the amount of a common reference RNA pool is usually restrictive.

Dentoskeletal changes induced by the Jasper jumper and the activator-headgear combination appliances followed by fixed orthodontic treatment

Introduction: The aim of this study was to compare the dentoskeletal changes of patients with Class II Division 1 malocclusion treated with either the Jasper jumper appliance or the activator-headgear combination, both associated with fixed appliances. Methods: The sample comprised 72 subjects with Class II Division 1 malocclusion divided into 3 groups: group 1 included 25 subjects treated with fixed appliances and the force modules of the Jasper jumper at an initial mean age of 12.72 years, group 2 included 25 subjects treated with the activator-headgear combination followed by fixed appliances at an initial mean age of 11.07 years, and group 3 included 22 untreated subjects at an initial mean age of 12.67 years. Initial cephalometric characteristics and dentoskeletal changes were compared with analysis of variance. Results: Both experimental groups had similar dentoskeletal changes: restrictive effect on the maxilla, clockwise mandibular rotation and a slight increase in anterior face height, retrusion of the maxillary incisors, distalization of the maxillary molars, protrusion of the mandibular incisors, extrusion of the mandibular molars, and significant improvements of the maxillomandibular relationship, overjet, overbite, and the molar relationship. Conclusions: The effects of the Jasper jumper and the activator-headgear combination followed by fixed orthodontic appliances were similar in Class II malocclusion treatment.

Blood transfusion in cardiac surgery is a risk factor for increased hospital length of stay in adult patients

Abstract Background Allogeneic red blood cell (RBC) transfusion has been proposed as a negative indicator of quality in cardiac surgery. Hospital length of stay (LOS) may be a surrogate of poor outcome in transfused patients. Methods Data from 502 patients included in Transfusion Requirements After Cardiac Surgery (TRACS) study were analyzed to assess the relationship between RBC transfusion and hospital LOS in patients undergoing cardiac surgery and enrolled in the TRACS study. Results According to the status of RBC transfusion, patients were categorized into the following three groups: 1) 199 patients (40%) who did not receive RBC, 2) 241 patients (48%) who received 3 RBC units or fewer (low transfusion requirement group), and 3) 62 patients (12%) who received more than 3 RBC units (high transfusion requirement group). In a multivariable Cox proportional hazards model, the following factors were predictive of a prolonged hospital length of stay: age higher than 65 years, EuroSCORE, valvular surgery, combined procedure, LVEF lower than 40% and RBC transfusion of > 3 units. Conclusion RBC transfusion is an independent risk factor for increased LOS in patients undergoing cardiac surgery. This finding highlights the adequacy of a restrictive transfusion therapy in patients undergoing cardiac surgery. Trial registration Clinicaltrials.gov identifier: http://NCT01021631.

PReS-FINAL-2170: Work disability in adult patients with juvenile idiopathic arthritis (JIA)

Introduction Approximately 20% JIA patients enters adulthood with clinically active disease and disabled, therefore work condition may be affected. Objectives To assess the prevalence of work disability among adult patients with JIA regularly attending a tertiary heumatology center and to determine possible associated risk factors. Methods This was a cross-sectional study that enrolled 43 JIA patients according to 2004 revised ILAR criteria. A questionnaire was developed in order to evaluate working status and labor activity: occupation, current/previous work, employment status and withdrawal rate were actively searched. Demographic data, JIA characteristics, clinical activity (DAS28>2.6), therapeutic intervention, comorbidities, physical activity, sedentarism (WHO definitions), functional class (1991 ACR criteria), HAQ and SF-36 were recorded. The prevalence of work disability was calculated using 95% confidence interval, and compared to all parameters; qualitative variables were analyzed using tests of association (chi-square test) and quantitative variables by Mann-Whitney or student test. Results Patients' mean age was 29+7.4 yrs (range 19-41) with mean JIA duration = 17.2+12.3 yrs (range 3-33); 63% were males and 37% females. JIA subtypes were 64% polyarticular, 11% oligoarticular, 9% systemic, 9% ERA, 2% extended oligoarticular, 2% psoriatic arthritis; 7% had uveitis. Serum RF was positive in 21% and ANA in 21%. The majority (72%, n = 31) of JIA patients were employed, whereas 28% (n = 12) were currently not working. In the latter group, 83% (10/12) were retired due to JIA related disability. Further analysis comparing those currently working vs. Those not working revealed similar age (25,3 yrs vs.29,5 yrs, p = 0,09). Although not significantly, most patients currently working had Poly onset JIA (22 vs. 6 p = 0,37), higher frequencies of good education level >12 yrs of school (31 vs.9, p = 0,38), functional class I (p = 0,96), practiced regular physical activity (9 vs. 0, p = 0,89), were singles (26 vs. 8, p = 0,15). Both groups had comparable HAQ and DAS 28 scores (0,62 vs. 0.59, p = 0,47 and 2,51 vs.2,07, p = 0,64) and similar arthroplasty rate (8 vs. 4, p = 0,427). Frequencies of hypertension (3 vs.1, p = 0,999), dyslipidemia (1 vs. 1, p = 0,125), diabetes (1 vs. 0 p = 0,999), depression (1 vs. 0, p = 0,999) and smokers (3 vs. 1, p = 0,99) were alike in both groups. Remarkably, employed patients had higher SF 36 mental health component (84.0 vs. 70.42, P = 0.01). Conclusion High prevalence of almost 1/3 work disability and of retirement due to disease related incapacity remain major problems for adult JIA individuals. We also identified worse mental health in employed patients indicating that further research is needed, in addition to intense affirmative disability actions in order to remove possible disabling barriers and to adapt restrictive environments for these patients. Moreover, enhanced strategies and policy for inclusion of JIA patients in the job market is urged.

Las Micro-áreas marinas como modelo de gestión sostenible. Notas metodológicas para su implantación en la bahía de Gaira, Colombia

Máster Oficial en Gestión Costera

Numerical and analytical vibro-acoustic modelling of porous materials: the Cell Method for poroelasticity and the case of inclusions

Porous materials are widely used in many fields of industrial applications, to achieve the requirements of noise reduction, that nowadays derive from strict regulations. The modeling of porous materials is still a problematic issue. Numerical simulations are often problematic in case of real complex geometries, especially in terms of computational times and convergence. At the same time, analytical models, even if partly limited by restrictive simplificative hypotheses, represent a powerful instrument to capture quickly the physics of the problem and general trends. In this context, a recently developed numerical method, called the Cell Method, is described, is presented in the case of the Biot's theory and applied for representative cases. The peculiarity of the Cell Method is that it allows for a direct algebraic and geometrical discretization of the field equations, without any reduction to a weak integral form. Then, the second part of the thesis presents the case of interaction between two poroelastic materials under the context of double porosity. The idea of using periodically repeated inclusions of a second porous material into a layer composed by an original material is described. In particular, the problem is addressed considering the efficiency of the analytical method. A analytical procedure for the simulation of heterogeneous layers based is described and validated considering both conditions of absorption and transmission; a comparison with the available numerical methods is performed. ---------------- I materiali porosi sono ampiamente utilizzati per diverse applicazioni industriali, al fine di raggiungere gli obiettivi di riduzione del rumore, che sono resi impegnativi da norme al giorno d'oggi sempre più stringenti. La modellazione dei materiali porori per applicazioni vibro-acustiche rapprensenta un aspetto di una certa complessità. Le simulazioni numeriche sono spesso problematiche quando siano coinvolte geometrie di pezzi reali, in particolare riguardo i tempi computazionali e la convergenza. Allo stesso tempo, i modelli analitici, anche se parzialmente limitati a causa di ipotesi semplificative che ne restringono l'ambito di utilizzo, rappresentano uno strumento molto utile per comprendere rapidamente la fisica del problema e individuare tendenze generali. In questo contesto, un metodo numerico recentemente sviluppato, il Metodo delle Celle, viene descritto, implementato nel caso della teoria di Biot per la poroelasticità e applicato a casi rappresentativi. La peculiarità del Metodo delle Celle consiste nella discretizzazione diretta algebrica e geometrica delle equazioni di campo, senza alcuna riduzione a forme integrali deboli. Successivamente, nella seconda parte della tesi viene presentato il caso delle interazioni tra due materiali poroelastici a contatto, nel contesto dei materiali a doppia porosità. Viene descritta l'idea di utilizzare inclusioni periodicamente ripetute di un secondo materiale poroso all'interno di un layer a sua volta poroso. In particolare, il problema è studiando il metodo analitico e la sua efficienza. Una procedura analitica per il calcolo di strati eterogenei di materiale viene descritta e validata considerando sia condizioni di assorbimento, sia di trasmissione; viene effettuata una comparazione con i metodi numerici a disposizione.

Modellazione multibody di veicoli ferroviari: sviluppo ed implementazione di modelli innovativi per l'analisi del contatto ruota - rotaia

The wheel - rail contact analysis plays a fundamental role in the multibody modeling of railway vehicles. A good contact model must provide an accurate description of the global contact phenomena (contact forces and torques, number and position of the contact points) and of the local contact phenomena (position and shape of the contact patch, stresses and displacements). The model has also to assure high numerical efficiency (in order to be implemented directly online within multibody models) and a good compatibility with commercial multibody software (Simpack Rail, Adams Rail). The wheel - rail contact problem has been discussed by several authors and many models can be found in the literature. The contact models can be subdivided into two different categories: the global models and the local (or differential) models. Currently, as regards the global models, the main approaches to the problem are the so - called rigid contact formulation and the semi – elastic contact description. The rigid approach considers the wheel and the rail as rigid bodies. The contact is imposed by means of constraint equations and the contact points are detected during the dynamic simulation by solving the nonlinear algebraic differential equations associated to the constrained multibody system. Indentation between the bodies is not permitted and the normal contact forces are calculated through the Lagrange multipliers. Finally the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces respectively. Also the semi - elastic approach considers the wheel and the rail as rigid bodies. However in this case no kinematic constraints are imposed and the indentation between the bodies is permitted. The contact points are detected by means of approximated procedures (based on look - up tables and simplifying hypotheses on the problem geometry). The normal contact forces are calculated as a function of the indentation while, as in the rigid approach, the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces. Both the described multibody approaches are computationally very efficient but their generality and accuracy turn out to be often insufficient because the physical hypotheses behind these theories are too restrictive and, in many circumstances, unverified. In order to obtain a complete description of the contact phenomena, local (or differential) contact models are needed. In other words wheel and rail have to be considered elastic bodies governed by the Navier’s equations and the contact has to be described by suitable analytical contact conditions. The contact between elastic bodies has been widely studied in literature both in the general case and in the rolling case. Many procedures based on variational inequalities, FEM techniques and convex optimization have been developed. This kind of approach assures high generality and accuracy but still needs very large computational costs and memory consumption. Due to the high computational load and memory consumption, referring to the current state of the art, the integration between multibody and differential modeling is almost absent in literature especially in the railway field. However this integration is very important because only the differential modeling allows an accurate analysis of the contact problem (in terms of contact forces and torques, position and shape of the contact patch, stresses and displacements) while the multibody modeling is the standard in the study of the railway dynamics. In this thesis some innovative wheel – rail contact models developed during the Ph. D. activity will be described. Concerning the global models, two new models belonging to the semi – elastic approach will be presented; the models satisfy the following specifics: 1) the models have to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the models have to consider generic railway tracks and generic wheel and rail profiles 3) the models have to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the models have to evaluate the number and the position of the contact points and, for each point, the contact forces and torques 4) the models have to be implementable directly online within the multibody models without look - up tables 5) the models have to assure computation times comparable with those of commercial multibody software (Simpack Rail, Adams Rail) and compatible with RT and HIL applications 6) the models have to be compatible with commercial multibody software (Simpack Rail, Adams Rail). The most innovative aspect of the new global contact models regards the detection of the contact points. In particular both the models aim to reduce the algebraic problem dimension by means of suitable analytical techniques. This kind of reduction allows to obtain an high numerical efficiency that makes possible the online implementation of the new procedure and the achievement of performance comparable with those of commercial multibody software. At the same time the analytical approach assures high accuracy and generality. Concerning the local (or differential) contact models, one new model satisfying the following specifics will be presented: 1) the model has to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the model has to consider generic railway tracks and generic wheel and rail profiles 3) the model has to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the model has to able to calculate both the global contact variables (contact forces and torques) and the local contact variables (position and shape of the contact patch, stresses and displacements) 4) the model has to be implementable directly online within the multibody models 5) the model has to assure high numerical efficiency and a reduced memory consumption in order to achieve a good integration between multibody and differential modeling (the base for the local contact models) 6) the model has to be compatible with commercial multibody software (Simpack Rail, Adams Rail). In this case the most innovative aspects of the new local contact model regard the contact modeling (by means of suitable analytical conditions) and the implementation of the numerical algorithms needed to solve the discrete problem arising from the discretization of the original continuum problem. Moreover, during the development of the local model, the achievement of a good compromise between accuracy and efficiency turned out to be very important to obtain a good integration between multibody and differential modeling. At this point the contact models has been inserted within a 3D multibody model of a railway vehicle to obtain a complete model of the wagon. The railway vehicle chosen as benchmark is the Manchester Wagon the physical and geometrical characteristics of which are easily available in the literature. The model of the whole railway vehicle (multibody model and contact model) has been implemented in the Matlab/Simulink environment. The multibody model has been implemented in SimMechanics, a Matlab toolbox specifically designed for multibody dynamics, while, as regards the contact models, the CS – functions have been used; this particular Matlab architecture allows to efficiently connect the Matlab/Simulink and the C/C++ environment. The 3D multibody model of the same vehicle (this time equipped with a standard contact model based on the semi - elastic approach) has been then implemented also in Simpack Rail, a commercial multibody software for railway vehicles widely tested and validated. Finally numerical simulations of the vehicle dynamics have been carried out on many different railway tracks with the aim of evaluating the performances of the whole model. The comparison between the results obtained by the Matlab/ Simulink model and those obtained by the Simpack Rail model has allowed an accurate and reliable validation of the new contact models. In conclusion to this brief introduction to my Ph. D. thesis, we would like to thank Trenitalia and the Regione Toscana for the support provided during all the Ph. D. activity. Moreover we would also like to thank the INTEC GmbH, the society the develops the software Simpack Rail, with which we are currently working together to develop innovative toolboxes specifically designed for the wheel rail contact analysis.

Outcome respiratorio a lungo termine nei soggetti affetti da cardiopatia congenita sottoposti ad intervento cardiochirurgico

Introduction: In the last years cardiac surgery for congenital heart disease (CHD) reduced dramatically mortality modifying prognosis, but, at the same time, increased morbidity in this patient population. Respiratory and cardiovascular systems are strictly anatomically and functionally connected, so that alterations of pulmonary hemodynamic conditions modify respiratory function. While very short-term alterations of respiratory mechanics after surgery were investigated by many authors, not as much works focused on long-term changes. In these subjects rest respiratory function may be limited by several factor: CHD itself (fetal pulmonary perfusion influences vascular and alveolar development), extracorporeal circulation (CEC), thoracotomy and/or sternotomy, rib and sternal contusions, pleural adhesions and pleural fibrosis, secondary to surgical injury. Moreover inflammatory cascade, triggered by CEC, can cause endothelial damage and compromise gas exchange. Aims: The project was conceived to 1) determine severity of respiratory functional impairement in different CHD undergone to surgical correction/palliation; 2) identify the most and the least CHD involved by pulmonary impairement; 3) find a correlation between a specific hemodynamic condition and functional anomaly, and 4) between rest respiratory function and cardiopulmonary exercise test. Materials and methods: We studied 113 subjects with CHD undergone to surgery, and distinguished by group in accord to pulmonary blood flow (group 0: 28 pts with normal pulmonary flow; group 1: 22 pts with increased flow; group 2: 43 pts with decreased flow; group 3: 20 pts with total cavo-pulmonary anastomosis-TCPC) followed by the Pediatric Cardiology and Cardiac Surgery Unit, and we compare them to 37 age- and sex-matched healthy subjects. In Pediatric Pulmonology Unit all pts performed respiratory function tests (static and dynamic volumes, flow/volume curve, airway resistances-raw- and conductance-gaw-, lung diffusion of CO-DLCO- and DLCO/alveolar volume), and CHD pts the same day had cardiopulmonary test. They all were examined and had allergological tests, and respiratory medical history. Results: restrictive pattern (measured on total lung capacity-TLC- and vital capacity-VC) was in all CHD groups, and up to 45% in group 2 and 3. Comparing all groups, we found a significant difference in TLC between healthy and group 2 (p=0.001) and 3 (p=0.004), and in VC between group 2 and healthy (p=0.001) and group 1(p=0.034). Inspiratory capacity (IC) was decreased in group 2 related to healthy (p<0.001) and group 1 (p=0.037). We showed a direct correlation between TLC and VC with age at surgery (p=0.01) and inverse with number of surgical interventions (p=0.03). Reduced FEV1/FVC ratio, Gaw and increased Raw were mostly present in group 3. DLCO was impaired in all groups, but up to 80% in group 3 and 50% in group 2; when corrected for alveolar volume (DLCO/VA) reduction persisted in group 3 (20%), 2 (6.2%) and 0 (7.1%). Exercise test was impaired in all groups: VO2max and VE markedly reduced in all but especially in group 3, and VE/VCO2 slope, marker of ventilatory response to exercise, is increased (<36) in 62.5% of group 3, where other pts had anyway value>32. Comparing group 3 and 2, the most involved categories, we found difference in VO2max and VE/VCO2 slope (respectively p=0.02 and p<0.0001). We evidenced correlation between rest and exercise tests, especially in group 0 (between VO2max and FVC, FEV1, VC, IC; inverse relation between VE/VCO2slope and FVC, FEV1 and VC), but also in group 1 (VO2max and IC), group 2 (VO2max and FVC and FEV1); never in group 3. Discussion: According with literature, we found a frequent impairment of rest pulmonary function in all groups, but especially in group 2 and 3. Restrictive pattern was the most frequent alteration probably due to compromised pulmonary (vascular and alveolar) development secondary to hypoperfusion in fetal and pre-surgery (and pre-TCPC)life. Parenchymal fibrosis, pleural adhesions and thoracic deformities can add further limitation, as showed by the correlation between group 3 and number of surgical intervention. Exercise tests were limited, particularly in group 3 (complex anatomy and lost of chronotropic response), and we found correlations between rest and exercise tests in all but group 3. We speculate that in this patients hemodynamic exceeds respiratory contribution, though markedly decreased.

On the geometry of the spin-statistics connection in quantum mechanics

The Spin-Statistics theorem states that the statistics of a system of identical particles is determined by their spin: Particles of integer spin are Bosons (i.e. obey Bose-Einstein statistics), whereas particles of half-integer spin are Fermions (i.e. obey Fermi-Dirac statistics). Since the original proof by Fierz and Pauli, it has been known that the connection between Spin and Statistics follows from the general principles of relativistic Quantum Field Theory. In spite of this, there are different approaches to Spin-Statistics and it is not clear whether the theorem holds under assumptions that are different, and even less restrictive, than the usual ones (e.g. Lorentz-covariance). Additionally, in Quantum Mechanics there is a deep relation between indistinguishabilty and the geometry of the configuration space. This is clearly illustrated by Gibbs' paradox. Therefore, for many years efforts have been made in order to find a geometric proof of the connection between Spin and Statistics. Recently, various proposals have been put forward, in which an attempt is made to derive the Spin-Statistics connection from assumptions different from the ones used in the relativistic, quantum field theoretic proofs. Among these, there is the one due to Berry and Robbins (BR), based on the postulation of a certain single-valuedness condition, that has caused a renewed interest in the problem. In the present thesis, we consider the problem of indistinguishability in Quantum Mechanics from a geometric-algebraic point of view. An approach is developed to study configuration spaces Q having a finite fundamental group, that allows us to describe different geometric structures of Q in terms of spaces of functions on the universal cover of Q. In particular, it is shown that the space of complex continuous functions over the universal cover of Q admits a decomposition into C(Q)-submodules, labelled by the irreducible representations of the fundamental group of Q, that can be interpreted as the spaces of sections of certain flat vector bundles over Q. With this technique, various results pertaining to the problem of quantum indistinguishability are reproduced in a clear and systematic way. Our method is also used in order to give a global formulation of the BR construction. As a result of this analysis, it is found that the single-valuedness condition of BR is inconsistent. Additionally, a proposal aiming at establishing the Fermi-Bose alternative, within our approach, is made.

Renormalization of fermion mixing

Precision measurements of phenomena related to fermion mixing require the inclusion of higher order corrections in the calculation of corresponding theoretical predictions. For this, a complete renormalization scheme for models that allow for fermion mixing is highly required. The correct treatment of unstable particles makes this task difficult and yet, no satisfactory and general solution can be found in the literature. In the present work, we study the renormalization of the fermion Lagrange density with Dirac and Majorana particles in models that involve mixing. The first part of the thesis provides a general renormalization prescription for the Lagrangian, while the second one is an application to specific models. In a general framework, using the on-shell renormalization scheme, we identify the physical mass and the decay width of a fermion from its full propagator. The so-called wave function renormalization constants are determined such that the subtracted propagator is diagonal on-shell. As a consequence of absorptive parts in the self-energy, the constants that are supposed to renormalize the incoming fermion and the outgoing antifermion are different from the ones that should renormalize the outgoing fermion and the incoming antifermion and not related by hermiticity, as desired. Instead of defining field renormalization constants identical to the wave function renormalization ones, we differentiate the two by a set of finite constants. Using the additional freedom offered by this finite difference, we investigate the possibility of defining field renormalization constants related by hermiticity. We show that for Dirac fermions, unless the model has very special features, the hermiticity condition leads to ill-defined matrix elements due to self-energy corrections of external legs. In the case of Majorana fermions, the constraints for the model are less restrictive. Here one might have a better chance to define field renormalization constants related by hermiticity. After analysing the complete renormalized Lagrangian in a general theory including vector and scalar bosons with arbitrary renormalizable interactions, we consider two specific models: quark mixing in the electroweak Standard Model and mixing of Majorana neutrinos in the seesaw mechanism. A counter term for fermion mixing matrices can not be fixed by only taking into account self-energy corrections or fermion field renormalization constants. The presence of unstable particles in the theory can lead to a non-unitary renormalized mixing matrix or to a gauge parameter dependence in its counter term. Therefore, we propose to determine the mixing matrix counter term by fixing the complete correction terms for a physical process to experimental measurements. As an example, we calculate the decay rate of a top quark and of a heavy neutrino. We provide in each of the chosen models sample calculations that can be easily extended to other theories.

Expressions- und Funktionsanalysen von Neuroglobin und Cytoglobin

Im Rahmen der vorliegenden Dissertation wurden Untersuchungen zur Expression und Funktion der respiratorischen Proteine Neuroglobin (Ngb) und Cytoglobin (Cygb) in Vertebraten durchgeführt. Beide Globine wurden erst kürzlich entdeckt, und ihre Funktionen konnten trotz vorliegender Daten zur Struktur und biochemischen Eigenschaften dieser Proteine bisher nicht eindeutig geklärt werden. Im ersten Abschnitt der vorliegenden Arbeit wurde die zelluläre und subzelluläre Lokalisation von Neuroglobin und Cytoglobin in murinen Gewebeschnitten untersucht. Die Expression von Ngb in neuronalen und endokrinen Geweben hängt offensichtlich mit den hohen metabolischen Aktivitäten dieser Organe zusammen. Insbesondere im Gehirn konnten regionale Unterschiede in der Ngb-Expression beobachtet werden. Dabei korrelierte eine besonders starke Neuroglobin-Expression mit Gehirnbereichen, die bekanntermaßen die höchsten Grundaktivitäten aufweisen. In Anbetracht dessen liegt die Funktion des Neuroglobins möglicherweise im basalen O2-Metabolismus dieser Gewebe, wobei Ngb als O2-Lieferant und kurzfristiger O2-Speicher den vergleichsweise hohen Sauerstoffbedarf vor Ort sicherstellen könnte. Weitere Funktionen in der Entgiftung von ROS bzw. RNS oder die kürzlich publizierte mögliche Rolle des Ngb bei der Verhinderung der Mitochondrien-vermittelten Apoptose durch eine Reduktion des freigesetzten Cytochrom c wären darüber hinaus denkbar. Die Cygb-Expression im Gehirn beschränkte sich auf relativ wenige Neurone in verschiedenen Gehirnbereichen und zeigte dort vorwiegend eine Co-Lokalisation mit der neuronalen NO-Synthase. Dieser Befund legt eine Funktion des Cytoglobins im NO-Metabolismus nahe. Quantitative RT-PCR-Experimente zur mRNA-Expression von Ngb und Cygb in alternden Säugern am Bsp. der Hamsterspezies Phodopus sungorus zeigten keine signifikanten Änderungen der mRNA-Mengen beider Globine in alten im Vergleich zu jungen Tieren. Dies widerspricht publizierten Daten, in denen bei der Maus anhand von Western Blot-Analysen eine Abnahme der Neuroglobin-Menge im Alter gezeigt wurde. Möglicherweise handelt es sich hierbei um speziesspezifische Differenzen. Die im Rahmen dieser Arbeit durchgeführte vergleichende Sequenzanalyse der humanen und murinen NGB/Ngb-Genregion liefert zum einen Hinweise auf die mögliche Regulation der Ngb-Expression und zum anderen eine wichtige Grundlage für die funktionellen Analysen dieses Gens. Es konnte ein minimaler Promotorbereich definiert werden, der zusammen mit einigen konservierten regulatorischen Elementen als Basis für experimentelle Untersuchungen der Promotoraktivität in Abhängigkeit von äußeren Einflüssen dienen wird. Bioinformatische Analysen führten zur Identifizierung des sog. „neuron restrictive silencer element“ (NRSE) im Ngb-Promotor, welches vermutlich für die vorwiegend neuronale Expression des Proteins verantwortlich ist. Die kontrovers diskutierte O2-abhängige Regulation der Ngb-Expression konnte hingegen anhand der durchgeführten komparativen Sequenzanalysen nicht bestätigt werden. Es wurden keine zwischen Mensch und Maus konservierten Bindestellen für den Transkriptionsfaktor HIF-1 identifiziert, der die Expression zahlreicher hypoxieregulierter Gene, z.B. Epo und VEGF, vermittelt. Zusammen mit den in vivo-Daten spricht dies eher gegen eine Regulation der Ngb-Expression bei verminderter Verfügbarkeit von Sauerstoff. Die Komplexität der Funktionen von Ngb und Cygb im O2-Stoffwechsel der Vertebraten macht den Einsatz muriner Modellsysteme unerlässlich, die eine sukzessive Aufklärung der Funktionen beider Proteine erlauben. Die vorliegende Arbeit liefert auch dazu einen wichtigen Beitrag. Die hergestellten „gene-targeting“-Vektorkonstrukte liefern in Verbindung mit den etablierten Nachweisverfahren zur Genotypisierung von embryonalen Stammzellen die Grundlage zur erfolgreichen Generierung von Ngb-knock out sowie Ngb- und Cygb-überexprimierenden transgenen Tieren. Diese werden für die endgültige Entschlüsselung funktionell relevanter Fragestellungen von enormer Bedeutung sein.

„When we are disciplined, we can learn very well“: Schüler und Disziplin an einem Jungeninternat in Nordghana /// Arbeitspapiere / Institut für Ethnologie und Afrikastudien ; 91

Diese Arbeit analysiert den Alltag in einem gymnasialen Jungeninternat in der Upper West Region in Ghana und setzt diese Analyse in eine anthropologische Perspektive zum Staat. Angeregt durch die Überlegungen von Michel Foucault zu Disziplinarmechanismen und „Technologien des Selbst“ steht die alltägliche Disziplinierung der Schüler im Mittelpunkt dieser Arbeit. Dabei wird Disziplin nicht als restriktiv, übergeordnet und allgegenwärtig gedacht, sondern als etwas, das die Schüler aktiv mitgestalten. Einerseits sind die Schüler der Nandom Secondary School Disziplinartechniken ausgesetzt, die sich auf die Kontrolle ihrer Körper beziehen: Sie werden vereinheitlicht, klassifiziert, hierarchisiert, überwacht, geprüft und bestraft. Andererseits sind die Schüler keine übermächtigten Objekte einer totalen Institution, sondern sie wirken kreativ mit beim Flechten des Netzes aus Kontrolle und Freiräumen in ihrer Schule: Sie spielen eine wichtige Rolle bei der Kontrolle der Lehrer; sie erkennen und nutzen Freiräume, deren Rahmen sie mit den Lehrern aushandeln. Auch ihr Selbst bekommen die Schüler nicht von den Lehrern einfach diktiert. Zwar wird ihnen durch das Bild des guten Schülers eine bestimmte Sicht auf sich selbst nahe gelegt, doch wie sie dieses Bild aufnehmen, ablehnen oder umdeuten liegt in ihren eigenen Händen.

Postkommunistische Wirtschaftsreformen und politische Institutionen : eine Analyse der wirtschaftspolitischen Handlungsfähigkeit junger Demokratien auf Basis der Vetospieler-Theorie

Diese Arbeit analysiert den Zusammenhang zwischen politischen Institutionen und wirtschaftlichen Reformen. Die verbreitete Meinung nimmt an, dass ein hohes Maß an politischer Kontrolle und Beschränkungen, etwa durch ein föderales System oder eine zweite Parlamentskammer, die Reformfähigkeit eines Landes negativ beeinflusst. Grundlage dieser Annahme sind die Schlussfolgerungen aus der Vetospieler-Theorie von George Tsebelis. Anhand des Reformverlaufs postkommunistischer Staaten zeigt diese Arbeit jedoch, dass der Zusammenhang zwischen politischer Beschränkung und Reformen nicht linear, sondern quadratisch ist. Ein Mittelweg zwischen einer frei waltenden Exekutive und einem System restriktiver checks and balances garantiert damit die größtmöglichen Fortschritte bei wirtschaftlichen Reformen von der Planwirtschaft zur Marktwirtschaft.

Operating System Contribution to Composable Timing Behaviour in High-Integrity Real-Time Systems

The development of High-Integrity Real-Time Systems has a high footprint in terms of human, material and schedule costs. Factoring functional, reusable logic in the application favors incremental development and contains costs. Yet, achieving incrementality in the timing behavior is a much harder problem. Complex features at all levels of the execution stack, aimed to boost average-case performance, exhibit timing behavior highly dependent on execution history, which wrecks time composability and incrementaility with it. Our goal here is to restitute time composability to the execution stack, working bottom up across it. We first characterize time composability without making assumptions on the system architecture or the software deployment to it. Later, we focus on the role played by the real-time operating system in our pursuit. Initially we consider single-core processors and, becoming less permissive on the admissible hardware features, we devise solutions that restore a convincing degree of time composability. To show what can be done for real, we developed TiCOS, an ARINC-compliant kernel, and re-designed ORK+, a kernel for Ada Ravenscar runtimes. In that work, we added support for limited-preemption to ORK+, an absolute premiere in the landscape of real-word kernels. Our implementation allows resource sharing to co-exist with limited-preemptive scheduling, which extends state of the art. We then turn our attention to multicore architectures, first considering partitioned systems, for which we achieve results close to those obtained for single-core processors. Subsequently, we shy away from the over-provision of those systems and consider less restrictive uses of homogeneous multiprocessors, where the scheduling algorithm is key to high schedulable utilization. To that end we single out RUN, a promising baseline, and extend it to SPRINT, which supports sporadic task sets, hence matches real-world industrial needs better. To corroborate our results we present findings from real-world case studies from avionic industry.