Methods to Increase Durability of Reactive ("D" Cracking) Coarse Aggregate in Portland Cement Concrete, MLR-73-01, 1973

The coarse aggregates used for Portland Cement concrete in southwest Iowa have exhibited a poor serviceability. This early failure is attributed to a characteristic commonly referred as "D" cracking. "D" line cracking is a discolored area of concrete caused by many fine, parallel hairline cracks. "D" line cracking is primarily caused by the movement of water in and through coarse aggregate with a unique pore structure. The presence of the water in the aggregates at the time of freezing causes the "D" cracking to occur and early failure. By making the pore structure less permeable to moisture, it is thought the durability factor of the concrete should increase. By drying the aggregate before mixing and then mixing with the cement, the particles of cement should enter the outer pore structure, and upon hydration make the pore structure less permeable to moisture.

Reactive rise in blood pressure upon cuff inflation: cuff inflation at the arm causes a greater rise in pressure than at the wrist in hypertensive patients.

OBJECTIVE: Cuff inflation at the arm is known to cause an instantaneous rise in blood pressure, which might be due to the discomfort of the procedure and might interfere with the precision of the blood pressure measurement. In this study, we compared the reactive rise in blood pressure induced by cuff inflation when the cuff was placed at the upper arm level and at the wrist. PARTICIPANTS AND METHODS: The reactive rise in systolic and diastolic blood pressure to cuff inflation was measured in 34 normotensive participants and 34 hypertensive patients. Each participant was equipped with two cuffs, one around the right upper arm (OMRON HEM-CR19, 22-32 cm) and one around the right wrist (OMRON HEM-CS 19, 17-22 cm; Omron Health Care Europe BV, Hoofddorp, The Netherlands). The cuffs were inflated in a double random order (maximal cuff pressure and position of the cuff) with two maximal cuff pressures: 180 and 240 mmHg. The cuffs were linked to an oscillometric device (OMRON HEM 907; Omron Health Care). Simultaneously, blood pressure was measured continuously at the middle finger of the left hand using photoplethysmography. Three measurements were made at each level of blood pressure at the arm and at the wrist, and the sequence of measurements was randomized. RESULTS: In normotensive participants, no significant difference was observed in the reactive rise in blood pressure when the cuff was inflated either at the arm or at the wrist irrespective of the level of cuff inflation. Inflating a cuff at the arm, however, induced a significantly greater rise in blood pressure than inflating it at the wrist in hypertensive participants for both systolic and diastolic pressures (P<0.01), and at both levels of cuff inflation. The blood pressure response to cuff inflation was independent of baseline blood pressure. CONCLUSIONS: The results show that in hypertensive patients, cuff inflation at the wrist produces a smaller reactive rise in blood pressure. The difference between the arm and the wrist is independent of the patient's level of blood pressure.

Optimal stop-loss reinsurance: a dependence analysis

The stop-loss reinsurance is one of the most important reinsurance contracts in the insurance market. From the insurer point of view, it presents an interesting property: it is optimal if the criterion of minimizing the variance of the cost of the insurer is used. The aim of the paper is to contribute to the analysis of the stop-loss contract in one period from the point of view of the insurer and the reinsurer. Firstly, the influence of the parameters of the reinsurance contract on the correlation coefficient between the cost of the insurer and the cost of the reinsurer is studied. Secondly, the optimal stop-loss contract is obtained if the criterion used is the maximization of the joint survival probability of the insurer and the reinsurer in one period.

On optimal dividend strategies with deficit or incomplete information

Rapport de synthèse Cette thèse consiste en trois essais sur les stratégies optimales de dividendes. Chaque essai correspond à un chapitre. Les deux premiers essais ont été écrits en collaboration avec les Professeurs Hans Ulrich Gerber et Elias S. W. Shiu et ils ont été publiés; voir Gerber et al. (2006b) ainsi que Gerber et al. (2008). Le troisième essai a été écrit en collaboration avec le Professeur Hans Ulrich Gerber. Le problème des stratégies optimales de dividendes remonte à de Finetti (1957). Il se pose comme suit: considérant le surplus d'une société, déterminer la stratégie optimale de distribution des dividendes. Le critère utilisé consiste à maximiser la somme des dividendes escomptés versés aux actionnaires jusqu'à la ruine2 de la société. Depuis de Finetti (1957), le problème a pris plusieurs formes et a été résolu pour différents modèles. Dans le modèle classique de théorie de la ruine, le problème a été résolu par Gerber (1969) et plus récemment, en utilisant une autre approche, par Azcue and Muler (2005) ou Schmidli (2008). Dans le modèle classique, il y a un flux continu et constant d'entrées d'argent. Quant aux sorties d'argent, elles sont aléatoires. Elles suivent un processus à sauts, à savoir un processus de Poisson composé. Un exemple qui correspond bien à un tel modèle est la valeur du surplus d'une compagnie d'assurance pour lequel les entrées et les sorties sont respectivement les primes et les sinistres. Le premier graphique de la Figure 1 en illustre un exemple. Dans cette thèse, seules les stratégies de barrière sont considérées, c'est-à-dire quand le surplus dépasse le niveau b de la barrière, l'excédent est distribué aux actionnaires comme dividendes. Le deuxième graphique de la Figure 1 montre le même exemple du surplus quand une barrière de niveau b est introduite, et le troisième graphique de cette figure montre, quand à lui, les dividendes cumulés. Chapitre l: "Maximizing dividends without bankruptcy" Dans ce premier essai, les barrières optimales sont calculées pour différentes distributions du montant des sinistres selon deux critères: I) La barrière optimale est calculée en utilisant le critère usuel qui consiste à maximiser l'espérance des dividendes escomptés jusqu'à la ruine. II) La barrière optimale est calculée en utilisant le second critère qui consiste, quant à lui, à maximiser l'espérance de la différence entre les dividendes escomptés jusqu'à la ruine et le déficit au moment de la ruine. Cet essai est inspiré par Dickson and Waters (2004), dont l'idée est de faire supporter aux actionnaires le déficit au moment de la ruine. Ceci est d'autant plus vrai dans le cas d'une compagnie d'assurance dont la ruine doit être évitée. Dans l'exemple de la Figure 1, le déficit au moment de la ruine est noté R. Des exemples numériques nous permettent de comparer le niveau des barrières optimales dans les situations I et II. Cette idée, d'ajouter une pénalité au moment de la ruine, a été généralisée dans Gerber et al. (2006a). Chapitre 2: "Methods for estimating the optimal dividend barrier and the probability of ruin" Dans ce second essai, du fait qu'en pratique on n'a jamais toute l'information nécessaire sur la distribution du montant des sinistres, on suppose que seuls les premiers moments de cette fonction sont connus. Cet essai développe et examine des méthodes qui permettent d'approximer, dans cette situation, le niveau de la barrière optimale, selon le critère usuel (cas I ci-dessus). Les approximations "de Vylder" et "diffusion" sont expliquées et examinées: Certaines de ces approximations utilisent deux, trois ou quatre des premiers moments. Des exemples numériques nous permettent de comparer les approximations du niveau de la barrière optimale, non seulement avec les valeurs exactes mais également entre elles. Chapitre 3: "Optimal dividends with incomplete information" Dans ce troisième et dernier essai, on s'intéresse à nouveau aux méthodes d'approximation du niveau de la barrière optimale quand seuls les premiers moments de la distribution du montant des sauts sont connus. Cette fois, on considère le modèle dual. Comme pour le modèle classique, dans un sens il y a un flux continu et dans l'autre un processus à sauts. A l'inverse du modèle classique, les gains suivent un processus de Poisson composé et les pertes sont constantes et continues; voir la Figure 2. Un tel modèle conviendrait pour une caisse de pension ou une société qui se spécialise dans les découvertes ou inventions. Ainsi, tant les approximations "de Vylder" et "diffusion" que les nouvelles approximations "gamma" et "gamma process" sont expliquées et analysées. Ces nouvelles approximations semblent donner de meilleurs résultats dans certains cas.

Proteasome-assisted identification of a SSX-2-derived epitope recognized by tumor-reactive CTL infiltrating metastatic melanoma.

The tumor Ag SSX-2 (HOM-MEL-40) was found by serological identification of Ags by recombinant expression cloning and was shown to be a cancer/testis Ag expressed in a wide variety of tumors. It may therefore represent a source of CD8(+) T cell epitopes useful for specific immunotherapy of cancer. To identify potential SSX-2-derived epitopes that can be recognized by CD8(+) T cells, we used an approach that combined: 1) the in vitro proteasomal digestion of precursor peptides overlapping the complete SSX-2 sequence; 2) the prediction of SSX-2-derived peptides with an appropriate HLA-A2 binding score; and 3) the analysis of a tumor-infiltrated lymph node cell population from an HLA-A2(+) melanoma patient with detectable anti-SSX-2 serum Abs. This strategy allowed us to identify peptide SSX-2(41-49) as an HLA-A2-restricted epitope. SSX2(41-49)-specific CD8(+) T cells were readily detectable in the tumor-infiltrated lymph node population by multimer staining, and CTL clones isolated by multimer-guided cell sorting were able to lyse HLA-A2(+) tumor cells expressing SSX-2.

Functional plasticity of the LACK-reactive Vbeta4-Valpha8 CD4(+) T cells normally producing the early IL-4 instructing Th2 cell development and susceptibility to Leishmania major in BALB / c mice.

Early production of IL-4 by LACK-reactive Vbeta4-Valpha8 CD4(+) T cells instructs aberrant Th2 cell development and susceptibility to Leishmania major in BALB / c mice. This was demonstrated using Vbeta4(+)-deficient BALB / c mice as a result of chronic infection with MMTV (SIM), a mouse mammary tumor virus expressing a Vbeta4-specific superantigen. The early IL-4 response was absent in these mice which develop a Th1 response to L. major. Here, we studied the functional plasticity of LACK-reactive Vbeta4-Valpha8 CD4(+) T cells using BALB/ c mice inoculated with L. major shortly after infection with MMTV (SIM), i. e. before deletion of Vbeta4(+) cells. These mice fail to produce the early IL-4 response to L. major and instead exhibit an IFN-gamma response that occurs within LACK-reactive Vbeta4-Valpha8 CD4(+) T cells. Neutralization of IFN-gamma restores the production of IL-4 by these cells. These data suggest that the functional properties of LACK-reactive Vbeta4-Valpha8 CD4(+) T cells are not irreversibly fixed.

Circulating Tumor-reactive CD8(+) T cells in melanoma patients contain a CD45RA(+)CCR7(-) effector subset exerting ex vivo tumor-specific cytolytic activity.

To defend the host from malignancies, the immune system can spontaneously raise CD8(+) T-cell responses against tumor antigens. Investigating the functional state of tumor-reactive cytolytic T cells in cancer patients is a key step for understanding the role of these cells in tumor immunosurveillance and for evaluating the potential of immunotherapeutic approaches of vaccination against cancer. In this study we identified a subset of circulating tumor-reactive CD8(+) T lymphocytes, which specifically secreted IFN-gamma after exposition to autologous tumor cell lines in stage IV metastatic melanoma patients. Additional phenotypic characterization using multicolor flow cytometry revealed that a significant fraction of these cells were CD45RA(+)CCR7(-), a phenotype that has been proposed recently to characterize cytolytic effectors potentially able to home into inflamed tissues. In the case of an HLA-A2-expressing patient, the antigen specificity of this population was identified by using HLA-A2/peptide multimers incorporating a tyrosinase-derived peptide. Consistently with their phenotypic characteristics, A2/tyrosinase peptide multimer(+) CD8(+) T cells, isolated by cell sorting, were directly lytic ex vivo and able to specifically recognize tyrosinase-expressing tumor cells. Overall, these results provide the first evidence that a proportion of melanoma patients have circulating tumor-reactive T cells, which are lytic effectors cells.

Antigenicity and immunogenicity of Melan-A/MART-1 derived peptides as targets for tumor reactive CTL in human melanoma.

Some cancer patients mount spontaneous T- and B-cell responses against their tumor cells. Autologous tumor reactive CD8 cytolytic T lymphocyte (CTL) and CD4 T-cell clones as well as antibodies from these patients have been used for the identification of genes encoding the target antigens. This knowledge opened the way for new approaches to the immunotherapy of cancer. In this review, we describe the characterization of the structure-function properties of the melanocyte/melanoma tumor antigen Melan-A/MART-1, the assessment of the T-cell repertoire available against this antigen in healthy individuals, and the analysis of naturally acquired and/or vaccine-induced CTL responses to this antigen in patients with metastatic melanoma.

Cutting edge: stimulation with the cognate self-antigen induces expression of the Ly49A receptor on self-reactive T cells which modulates their responsiveness.

NK cell self-tolerance is maintained by inhibitory receptors specific for MHC class I molecules. Inhibitory NK receptors are also expressed on memory CD8 T cells but their biological relevance on T cells is unclear. In this study, we describe the expression of the Ly49A receptor on a subset of autoreactive T cells which persist in mice double-transgenic for the lymphocytic choriomeningitis virus-derived peptide gp33 and a TCRalphabeta specific for the gp33. No Ly49A-expressing cells are found in TCRalphabeta single-transgenic mice, indicating that the presence of the autoantigen is required for Ly49A induction. Direct evidence for an Ag-specific initiation of Ly49A expression has been obtained in vitro after stimulation of autoreactive TCRalphabeta T cells with the cognate self-Ag. This expression of Ly49A substantially reduces Ag-specific activation of autoreactive T cells. These findings thus suggest that autoantigen-specific induction of inhibitory NK cell receptors on T cells may contribute to peripheral self-tolerance.

Optimal use of SSR markers for varietal identification of upland cotton

Abstract: The objective of this work was to identify polymorphic simple sequence repeat (SSR) markers for varietal identification of cotton and evaluation of the genetic distance among the varieties. Initially, 92 SSR markers were genotyped in 20 Brazilian cotton cultivars. Of this total, 38 loci were polymorphic, two of which were amplified by one primer pair; the mean number of alleles per locus was 2.2. The values of polymorphic information content (PIC) and discrimination power (DP) were, on average, 0.374 and 0.433, respectively. The mean genetic distance was 0.397 (minimum of 0.092 and maximum of 0.641). A panel of 96 varieties originating from different regions of the world was assessed by 21 polymorphic loci derived from 17 selected primer pairs. Among these varieties, the mean genetic distance was 0.387 (minimum of 0 and maximum of 0.786). The dendrograms generated by the unweighted pair group method with arithmetic average (UPGMA) did not reflect the regions of Brazil (20 genotypes) or around the world (96 genotypes), where the varieties or lines were selected. Bootstrap resampling shows that genotype identification is viable with 19 loci. The polymorphic markers evaluated are useful to perform varietal identification in a large panel of cotton varieties and may be applied in studies of the species diversity.

Moniensiöinen muuntaja taajuudenmuuttajakäytössä

Suuritehoisissa pumppu- ja puhallinkäytöissä käytetään usein suurnopeusmoottoria,jota syötetään välijännitteellä. Suurjännitetaajuudenmuuttajat ovat kalliita, eikä niitä ole aina edes mahdollista valmistaa. Tutkimuksen kohteena on rinnakkaisilla pienjännitetaajuudenmuuttajilla toteutettu sähkökäyttö, jossa pienjännite nostetaan moniensiöisellä muuntajalla suurjännitteeksi (6,6 kV) ja syötetään edelleen kuormana olevalle suurnopeusmoottorille. Opinnäytetyössä tutkitaan moniensiöisen muuntajan syöttöä rinnakkaisilla taajuudenmuuttajilla sekä niiden aiheuttamia häiriöitä toisilleen. Työssä tutkitaan myös harmonisten yliaaltojen vaikutuksia muuntajan häviöihin ja magnetointiominaisuuksiin. Taajuudenmuuttajan lähtöjännite ja -virta suodatetaan sinisuotimella, jonka parametreja simuloidaan Simulink- ohjelmistolla. Tavoite on löytää optimaaliset parametrit taajuudenmuuttajanlähtösuotimelle käyrämuotojen ja suotimeen jäävän tehon suhteen. Työssä tarkasteltiin sinisuodinta, johon jää 3 prosenttia syöttöjännitteestä. LC-suodin kompensoi sähkökäytön loistehon lähes kokonaan, joten taajuudenmuuttajien antotehon kannalta suotimet ovat perusteltuja. Taajuudenmuuttajan näennäisteho putoaa 22 prosenttia, joten taajuudenmuuttajat voidaan vastaavasti mitoittaa pienemmiksi.

Optimal Mechanical PulpingProcesses for Eucalyptus, Acacia and Birch

Tässä diplomityössä tutkittiin ja vertailtiin eukalyptuksen, akaasian ja koivun kemimekaanista kuiduttamista ja valkaisua. Yleensä näitä puulajeja käytetään sellun keittoon. Puulajit eroavat toisistaan kasvupaikan ja kuiturakenteen osalta. Eukalyptus ja akaasia ovat niin sanottuja trooppisia lehtipuita, kun taas koivu kasvaa pohjoisilla vyöhykkeillä. Koivulla on kookkaimmat kuidut ja akaasialla pienimmät kuidut. Myös näiden lajien putkilot eroavat toisistaan. Koivun putkilot ovat pitkiä ja kapeita, kun taas eukalyptuksen ja akaasian putkilot ovat lyhyitä ja leveitä. Prosessiksi valittiin kaksivaiheinen APMP-prosessi. Koeajot tehtiinKeskuslaboratorio Oy:ssä. Massoille asetettiin seuraavat tavoitteet: freeness 150-200 ml ja vaaleus 80 %ISO. Eukalyptukselle ja koivulle tehtiin kaksi erilaista impregnointisarjaa, mutta akaasialle vain yksi. Jauhatuksen viimeisessä vaiheessa kokeiltiin myös jauhinvalkaisua. Jauhatuksen energiankulutus oli korkea varsinkin eukalyptuksella ja akaasialla. Jotta energiankulutus saataisiin pienemmäksi, tulisi käyttää enemmän lipeää, mutta se johtaa alkalitummumiseen. Lopuksi massat valkaistiin laboratoriossa. Eukalyptus ja koivu pystyttiin valkaisemaan vaaleuteen 80 %ISO, mutta eukalyptuksen valkaisu vaati enemmän peroksidia kuin koivun valkaisu. Akaasian lähtövaaleus oli niin alhainen, ettei siinä päästy tavoitevaaleuteen. Eukalyptuksella on parempi valonsironta ja paremmat lujuusominaisuudet kuin koivulla. Kemimekaanista massaa voidaan käyttää hienopaperissa parantamassa jäykkyyttä, bulkkia ja valonsirontaa, mutta usein ongelmana on alhainen vaaleus ja huono vaaleuden pysyvyys. Kemimekaanista massaa voidaankäyttää missä tahansa mekaanisissa painopapereissa. Mekaanisissa painopapereissa kemimekaanisella lehtipuumassalla voidaan korvata mekaanista havupuumassaa. Akaasia on niin tummaa, ettei sitä voida käyttää korkeavaaleuksisiin papereihin. Eukalyptus ja koivu ovat vaaleampia ja helpompia valkaista kuin akaasia, mutta myös niillä on niin huono vaaleudenpysyvyys että käyttö hienopapereissa on rajoittunutta. Mekaanisille eukalyptus ja koivumassoille hienopaperia parempi käyttökohde on mekaaniset painopaperit, kuten MWC-paperi.