Evaluation of the AlgerBrush II rotating burr as a tool for inducing ocular surface failure in the New Zealand White rabbit

The New Zealand White rabbit has been widely used as a model of limbal stem cell deficiency (LSCD). Current techniques for experimental induction of LSCD utilize caustic chemicals, or organic solvents applied in conjunction with a surgical limbectomy. While generally successful in depleting epithelial progenitors, the depth and severity of injury is difficult to control using chemical-based methods. Moreover, the anterior chamber can be easily perforated while surgically excising the corneal limbus. In the interest of creating a safer and more defined LSCD model, we have therefore evaluated a mechanical debridement technique based upon use of the AlgerBrush II rotating burr. An initial comparison of debridement techniques was conducted in situ using 24 eyes in freshly acquired New Zealand White rabbit cadavers. Techniques for comparison (4 eyes each) included: (1) non-wounded control, (2) surgical limbectomy followed by treatment with 100% (v/v) n-heptanol to remove the corneal epithelium (1-2 minutes), (3) treatment of both limbus and cornea with n-heptanol alone, (4) treatment of both limbus and cornea with 20% (v/v) ethanol (2-3 minutes), (5) a 2.5-mm rounded burr applied to both the limbus and cornea, and (6) a 1-mm pointed burr applied to the limbus, followed by the 2.5-mm rounded burr applied to the cornea. All corneas were excised and processed for histology immediately following debridement. A panel of four assessors subsequently scored the degree of epithelial debridement within the cornea and limbus using masked slides. The 2.5-mm burr most consistently removed the corneal and limbal epithelia. Islands of limbal epithelial cells were occasionally retained following surgical limbectomy/heptanol treatment, or use of the 1-mm burr. Limbal epithelial cells were consistently retained following treatment with either ethanol or n-heptanol alone, with ethanol being the least effective treatment overall. The 2.5-mm burr method was subsequently evaluated in the right eye of 3 live rabbits by weekly clinical assessments (photography and slit lamp examination) for up to 5 weeks, followed by histological analyses (hematoxylin & eosin stain, periodic acid-Schiff stain and immunohistochemistry for keratin 3 and 13). All 3 eyes that had been completely debrided using the 2.5-mm burr displayed symptoms of ocular surface failure as defined by retention of a prominent epithelial defect (~40% of corneal surface at 5 weeks), corneal neovascularization (2 to 3 quadrants), reduced corneal transparency and conjunctivalization of the corneal surface (demonstrated by the presence of goblet cells and/or staining for keratin 13). In conclusion, our findings indicate that the AlgerBrush II rotating burr is an effective method for the establishment of ocular surface failure in New Zealand White rabbits. In particular, we recommend use of the 2.5-mm rotating burr for improved efficiency of epithelial debridement and safety compared to surgical limbectomy.

Pathophysiology of Congenital Nephrotic Syndrome of the Finnish type

Congenital nephrotic syndrome of the Finnish type (NPHS1) is an autosomal recessive disease which is highly enriched in the Finnish population. It is caused by mutations in the NPHS1 gene encoding for nephrin, which is a major component of the glomerular filtration barrier in the kidney. Patients with NPHS1 have heavy proteinuria and nephrotic syndrome (NS) from birth and develop renal fibrosis in early childhood. Renal transplantation (TX) is the only curative treatment for NPHS1. These patients form the largest group of pediatric kidney transplant children in our country. The NPHS1 kidneys are removed in infancy and they serve as an excellent human material for studies of the pathophysiology of proteinuric kidney diseases. Sustained proteinuria is a major factor leading to end-stage renal failure and understanding this process is crucial for nephrology. In this study we investigated the glomerular and tubulointerstitial changes that occur in the NPHS1 kidneys during infancy as well as the expression of nephrin in non-renal tissues. We also studied the pathology and management of recurrent proteinuria in kidney grafts transplanted to NPHS1 children. Severe renal lesions evolved in patients with NPHS1 during the first months of life. Glomerular sclerosis developed through progressive mesangial sclerosis, and capillary obliteration was an early consequence of this process. Shrinkage of the glomerular tuft was common, whereas occlusion of tubular opening or protrusion of the glomerular tuft into subepithelial space or through the Bowman's capsule were not detected. Few inflammatory cells were detected in the mesangial area. The glomerular epithelial cells (podocytes) showed severe ultrastructural changes and hypertrophy. Podocyte proliferation and apoptosis were rare, but moderate amounts of podocytes were detached and ended up in the urine. The results showed that endocapillary lesions not extracapillary lesions, as generally believed were important for the sclerotic process in the NPHS1 glomeruli. In the tubulointerstitium, severe lesions developed in NPHS1 kidneys during infancy. Despite heavy proteinuria, tubular epithelial cells (TECs) did not show transition into myofibroblasts. The most abundant chemokines in NPHS1 tissue were neutrophil activating protein-2 (NAP-2), macrophage inhibiting factor (MIF), and monocyte chemoattractant protein-1 (MCP-1). Interstitial inflammation and fibrosis were first detected in the paraglomerular areas and the most abundant inflammatory cells were monocytes/macrophages. Arteries and arterioles showed intimal hypertrophy, but the pericapillary microvasculature remained quite normal. However, excessive oxidative stress was evident in NPHS1 kidneys. The results indicated that TECs were relatively resistant to the heavy tubular protein load. Nephrin was at first thought to be podocyte specific, but some studies especially in experimental animals have suggested that nephrin might also be expressed in non-renal tissues such as pancreas and central nervous system. The knowledge of nephrin biology is important for the evaluation of nephrin related diseases. In our study, no significant amounts of nephrin protein or mRNA were detected in non-renal tissues of man and pig as studied by immunohistochemistry and in situ hybridization. The phenotype analysis of NPHS1 children, who totally lack nephrin, revealed no marked impairment in the neurological, testicular, or pancreatic function speaking against the idea that nephrin would play an important functional role outside the kidney. The NPHS1 kidneys do not express nephrin and antibodies against this major glomerular filter protein have been observed in NPHS1 children after renal TX most likely as an immune reaction against a novel antigen. These antibodies have been associated with the development of recurrent NS in the kidney graft of NPHS1 patients. In our study, a third of the NPHS1 patients homozygous for Fin-Major mutation developed recurrent NS in the transplanted graft. Re-transplantations were performed to patients who lost their graft due to recurrent NS and heavy proteinuria immediately developed in all cases. While 73% of the patients had detectable serum anti-nephrin antibodies, the kidney biopsy findings were minimal. Introduction of plasma exchange (PE) to the treatment of recurrent nephroses increased the remission rate from 54% to 89%. If remission was achieved, recurrent NS did not significantly deteriorate the long term graft function. In conclusion, the results show that the lack of nephrin in podocyte slit diaphragm in NPHS1 kidneys induces progressive mesangial expansion and glomerular capillary obliteration and inflicts interstitial fibrosis, inflammation, and oxidative stress with surprisingly little involvement of the TECs in this process. Nephrin appears to have no clinical significance outside the kidney. Development of antibodies against nephrin seems to be a major cause of recurrent NS in kidney grafts of NPHS1 patients and combined use of PE and cyclophosphamide markedly improved remission rates.

Development of a new flexor tendon repair technique performed with bioabsorbable poly-L/D-lactide (PLDLA) suture

Sormen koukistajajännevamman korjauksen jälkeisen aktiivisen mobilisaation on todettu johtavan parempaan toiminnalliseen lopputulokseen kuin nykyisin yleisesti käytetyn dynaamisen mobilisaation. Aktiivisen mobilisaation ongelma on jännekorjauksen pettämisriskin lisääntyminen nykyisten ommeltekniikoiden riittämättömän vahvuuden vuoksi. Jännekorjauksen lujuutta on parannettu kehittämällä monisäieommeltekniikoita, joissa jänteeseen tehdään useita rinnakkaisia ydinompeleita. Niiden kliinistä käyttöä rajoittaa kuitenkin monimutkainen ja aikaa vievä tekninen suoritus. Käden koukistajajännekorjauksessa käytetään yleisesti sulamattomia ommelmateriaaleja. Nykyiset käytössä olevat biohajoavat langat heikkenevät liian nopeasti jänteen paranemiseen nähden. Biohajoavan laktidistereokopolymeeri (PLDLA) 96/4 – langan vetolujuuden puoliintumisajan sekä kudosominaisuuksien on aiemmin todettu soveltuvan koukistajajännekorjaukseen. Tutkimuksen tavoitteena oli kehittää välittömän aktiivisen mobilisaation kestävä ja toteutukseltaan yksinkertainen käden koukistajajännekorjausmenetelmä biohajoavaa PLDLA 96/4 –materiaalia käyttäen. Tutkimuksessa analysoitiin viiden eri yleisesti käytetyn koukistajajänneompeleen biomekaanisia ominaisuuksia staattisessa vetolujuustestauksessa ydinompeleen rakenteellisten ominaisuuksien – 1) säikeiden (lankojen) lukumäärän, 2) langan paksuuden ja 3) ompeleen konfiguraation – vaikutuksen selvittämiseksi jännekorjauksen pettämiseen ja vahvuuteen. Jännekorjausten näkyvän avautumisen todettiin alkavan perifeerisen ompeleen pettäessä voima-venymäkäyrän myötöpisteessä. Ydinompeleen lankojen lukumäärän lisääminen paransi ompeleen pitokykyä jänteessä ja suurensi korjauksen myötövoimaa. Sen sijaan paksumman (vahvemman) langan käyttäminen tai ompeleen konfiguraatio eivät vaikuttaneet myötövoimaan. Tulosten perusteella tutkittiin mahdollisuuksia lisätä ompeleen pitokykyä jänteestä yksinkertaisella monisäieompeleella, jossa ydinommel tehtiin kolmen säikeen polyesterilangalla tai nauhamaisen rakenteen omaavalla kolmen säikeen polyesterilangalla. Nauhamainen rakenne lisäsi merkitsevästi ompeleen pitokykyä jänteessä parantaen myötövoimaa sekä maksimivoimaa. Korjauksen vahvuus ylitti aktiivisen mobilisaation jännekorjaukseen kohdistaman kuormitustason. PLDLA 96/4 –langan soveltuvuutta koukistajajännekorjaukseen selvitettiin tutkimalla langan biomekaanisia ominaisuuksia ja solmujen pito-ominaisuuksia staattisessa vetolujuustestauksessa verrattuna yleisimmin jännekorjauksessa käytettävään punottuun polyesterilankaan (Ticron®). PLDLA –langan todettiin soveltuvan hyvin koukistajajännekorjaukseen, sillä se on polyesterilankaa venymättömämpi ja solmujen pitävyys on parempi. Viimeisessä vaiheessa tutkittiin PLDLA 96/4 –langasta valmistetulla kolmisäikeisellä, nauhamaisella jännekorjausvälineellä tehdyn jännekorjauksen kestävyyttä staattisessa vetolujuustestauksessa sekä syklisessä kuormituksessa, joka simuloi staattista testausta paremmin mobilisaation toistuvaa kuormitusta. PLDLA-korjauksen vahvuus ylitti sekä staattisessa että syklisessä kuormituksessa aktiivisen mobilisaation edellyttämän vahvuuden. Nauhamaista litteää ommelmateriaalia ei aiemmin ole tutkittu tai käytetty käden koukistajajännekorjauksessa. Tässä tutkimuksessa ommelmateriaalin nauhamainen rakenne paransi merkitsevästi jännekorjauksen vahvuutta, minkä arvioidaan johtuvan lisääntyneestä kontaktipinnasta jänteen ja ommelmateriaalin välillä estäen ompeleen läpileikkautumista jänteessä. Tutkimuksessa biohajoavasta PLDLA –materiaalista valmistetulla rakenteeltaan nauhamaisella kolmisäikeisellä langalla tehdyn jännekorjauksen vahvuus saavutti aktiivisen mobilisaation edellyttämän tason. Lisäksi uusi menetelmä on helppokäyttöinen ja sillä vältetään perinteisten monisäieompeleiden tekniseen suoritukseen liittyvät ongelmat.

Late results after paediatric cardiac surgery

Background: Congenital heart defects include a wide range of inborn malformations. Depending on the defect, the life expectancy of a newborn with cardiac anomaly varies from a few days to a normal life span. In most instances surgery, is the only treatment available. The late results of surgery have not been comprehensively investigated. Aims: Mortality, morbidity and the life situation of all Finnish patients who had been operated on for congenital heart defect during childhood were investigated. Methods: Patient and surgical data were gathered from all hospitals that had performed heart surgeries on children. Late mortality and survival data were obtained from the population registry, and the causes of deaths from Statistics Finland. Morbidity of patients operated on during 1953-1989 was assessed by the usage of medicines. The pharmacotherapy data of patients and controls were obtained from the Social Insurance Institute. The life situation of patients was surveyed by mailed questionnaire. Survival, causes of deaths and life situation of patients were compared with those of the general population. Results: A total of 7240 cardiac operations were performed on 6461 children during the first 37 years of cardiac surgery (1953-1989). The number of procedures constantly rose during this period, and the increase continued in later years. The patient material varied over time, as more defects became surgically treatable. During 1953-1989 the operative mortality (death within 30 days of surgery) was 6.9%. In the 1990s a slight rise occurred in early mortality, as increasingly complicated patients were surgically treated. During 2000-2003 practically no defects were beyond the operative range. Thus, the operative mortality of 4.4% was excellent, decreasing even further to 2.0% in 2004-2007. The overall 45-year survival of patients operated on in 1953-1989 was 78%, and the corresponding figure for the general population was 93%. Survival depended on the defect, being worst among patients with univentricular heart. Late survival was also better during the 1990s and at the beginning of the 21st century. Of the 6028 early survivors, 592 died late (>30 days) after surgery. A total of 397 deaths (67%) were related and 185 (31%) unrelated to congenital heart defect. The cause of death was unknown in 10 cases. Of those 5774 patients who survived their first operation and had complete follow-up, 16% were operated on several times. Seventeen percent of patients used medicines for cardiac symptoms (heart failure, arrhythmia, hypertension and coronary disease). Patients risk of using cardiac medicines was 2.16 (Cl 1.97-2.37) times higher than that of controls. Patients also had more genetic syndromes and mental retardation and more often used medicines for asthma and epilepsy. Adult patients who had been operated on as children had coped surprisingly well with their defects. Their level of education was similar and their employment level even higher than expected, and they were living in a steady relationship as often as the general population. Conclusions: Cardiac surgery developed rapidly, and nowadays practically all defects can be treated. The overall survival of all operated patients was 78%, 16% less than that of the general population. However, it was significantly better than the anticipated natural survival. However, many patients had health problems; 16% needed reoperations and 17% cardiac medicines to maintain their condition. Most of the patients assessed their general health as good and lived a normal life.

Quantitation and characterization of glutathionyl haemoglobin as an oxidative stress marker in chronic renal failure by mass spectrometry

Objectives: Glutathionyl haemoglobin (GS-Hb) belonging to the class of glutathionylated proteins has been investigated as a possible marker of oxidative stress in different chronic diseases. The purpose of this study was to examine whether glutathionyl haemoglobin can serve as an oxidative stress marker in non-diabetic chronic renal failure patients on different renal replacement therapies (RRT) through its quantitation, and characterization of the specific binding site of glutathione in haemoglobin molecule by mass spectrometric analysis. Design and methods: The study group consisted of non-diabetic chronic renal failure patients on renal replacement therapy (RRT): hemodialysis (HD), continuous ambulatory peritoneal dialysis (CAPD) and renal allograft transplant (Txp) patients. Haemoglobin samples of these subjects were analyzed by liquid chromatography electrospray ionization mass spectrometry for GS-Hb quantitation. Characterization of GS-Hb was done by tandem mass spectrometry. Levels of erythrocyte glutathione (GSH) and lipid peroxidation (as thiobarbituric acid reacting substances) were measured spectrophotometrically, while glycated baernoglobin (HbA1c) was measured by HPLC. Results: GS-Hb levels were markedly elevated in the dialysis group and marginally in the transplant group as compared to the controls. GS-Hb levels correlated positively with lipid peroxidation and negatively with the erythrocyte glutathione levels in RRT groups indicating enhanced oxidative stress. De novo sequencing of the chymotryptic fragment of GS-Hb established that glutathione is attached to Cys-93 of the beta globin chain. Mass spectrometric quantitation of total glycated haemoglobin showed good agreement with HbA1c estimation by conventional HPLC method. Conclusions: Glutathionyl haemoglobin can serve as a clinical marker of oxidative stress in chronic debilitating therapies like RRT. Mass spectrometry provides a reliable analytical tool for quantitation and residue level characterization of different post-translational modifications of haemoglobin. (c) 2007 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Interatomic potentials for fusion reactor material simulations

Fusion energy is a clean and safe solution for the intricate question of how to produce non-polluting and sustainable energy for the constantly growing population. The fusion process does not result in any harmful waste or green-house gases, since small amounts of helium is the only bi-product that is produced when using the hydrogen isotopes deuterium and tritium as fuel. Moreover, deuterium is abundant in seawater and tritium can be bred from lithium, a common metal in the Earth's crust, rendering the fuel reservoirs practically bottomless. Due to its enormous mass, the Sun has been able to utilize fusion as its main energy source ever since it was born. But here on Earth, we must find other means to achieve the same. Inertial fusion involving powerful lasers and thermonuclear fusion employing extreme temperatures are examples of successful methods. However, these have yet to produce more energy than they consume. In thermonuclear fusion, the fuel is held inside a tokamak, which is a doughnut-shaped chamber with strong magnets wrapped around it. Once the fuel is heated up, it is controlled with the help of these magnets, since the required temperatures (over 100 million degrees C) will separate the electrons from the nuclei, forming a plasma. Once the fusion reactions occur, excess binding energy is released as energetic neutrons, which are absorbed in water in order to produce steam that runs turbines. Keeping the power losses from the plasma low, thus allowing for a high number of reactions, is a challenge. Another challenge is related to the reactor materials, since the confinement of the plasma particles is not perfect, resulting in particle bombardment of the reactor walls and structures. Material erosion and activation as well as plasma contamination are expected. Adding to this, the high energy neutrons will cause radiation damage in the materials, causing, for instance, swelling and embrittlement. In this thesis, the behaviour of a material situated in a fusion reactor was studied using molecular dynamics simulations. Simulations of processes in the next generation fusion reactor ITER include the reactor materials beryllium, carbon and tungsten as well as the plasma hydrogen isotopes. This means that interaction models, {\it i.e. interatomic potentials}, for this complicated quaternary system are needed. The task of finding such potentials is nonetheless nearly at its end, since models for the beryllium-carbon-hydrogen interactions were constructed in this thesis and as a continuation of that work, a beryllium-tungsten model is under development. These potentials are combinable with the earlier tungsten-carbon-hydrogen ones. The potentials were used to explain the chemical sputtering of beryllium due to deuterium plasma exposure. During experiments, a large fraction of the sputtered beryllium atoms were observed to be released as BeD molecules, and the simulations identified the swift chemical sputtering mechanism, previously not believed to be important in metals, as the underlying mechanism. Radiation damage in the reactor structural materials vanadium, iron and iron chromium, as well as in the wall material tungsten and the mixed alloy tungsten carbide, was also studied in this thesis. Interatomic potentials for vanadium, tungsten and iron were modified to be better suited for simulating collision cascades that are formed during particle irradiation, and the potential features affecting the resulting primary damage were identified. Including the often neglected electronic effects in the simulations was also shown to have an impact on the damage. With proper tuning of the electron-phonon interaction strength, experimentally measured quantities related to ion-beam mixing in iron could be reproduced. The damage in tungsten carbide alloys showed elemental asymmetry, as the major part of the damage consisted of carbon defects. On the other hand, modelling the damage in the iron chromium alloy, essentially representing steel, showed that small additions of chromium do not noticeably affect the primary damage in iron. Since a complete assessment of the response of a material in a future full-scale fusion reactor is not achievable using only experimental techniques, molecular dynamics simulations are of vital help. This thesis has not only provided insight into complicated reactor processes and improved current methods, but also offered tools for further simulations. It is therefore an important step towards making fusion energy more than a future goal.

Optimal configurations of active fiber composites based on asymptotic torsional analysis - art. no. 641413

Active Fiber Composites (AFC) possess desirable characteristics over a wide range of smart structure applications, such as vibration, shape and flow control as well as structural health monitoring. This type of material, capable of collocated actuation and sensing, call be used in smart structures with self-sensing circuits. This paper proposes four novel applications of AFC structures undergoing torsion: sensors and actuators shaped as strips and tubes; and concludes with a preliminary failure analysis. To enable this, a powerful mathematical technique, the Variational Asymptotic Method (VAM) was used to perform cross-sectional analyses of thin generally anisotropic AFC beams. The resulting closed form expressions have been utilized in the applications presented herein.

Multiscale study on hydrogen mobility in metallic fusion divertor material

For achieving efficient fusion energy production, the plasma-facing wall materials of the fusion reactor should ensure long time operation. In the next step fusion device, ITER, the first wall region facing the highest heat and particle load, i.e. the divertor area, will mainly consist of tiles based on tungsten. During the reactor operation, the tungsten material is slowly but inevitably saturated with tritium. Tritium is the relatively short-lived hydrogen isotope used in the fusion reaction. The amount of tritium retained in the wall materials should be minimized and its recycling back to the plasma must be unrestrained, otherwise it cannot be used for fueling the plasma. A very expensive and thus economically not viable solution is to replace the first walls quite often. A better solution is to heat the walls to temperatures where tritium is released. Unfortunately, the exact mechanisms of hydrogen release in tungsten are not known. In this thesis both experimental and computational methods have been used for studying the release and retention of hydrogen in tungsten. The experimental work consists of hydrogen implantations into pure polycrystalline tungsten, the determination of the hydrogen concentrations using ion beam analyses (IBA) and monitoring the out-diffused hydrogen gas with thermodesorption spectrometry (TDS) as the tungsten samples are heated at elevated temperatures. Combining IBA methods with TDS, the retained amount of hydrogen is obtained as well as the temperatures needed for the hydrogen release. With computational methods the hydrogen-defect interactions and implantation-induced irradiation damage can be examined at the atomic level. The method of multiscale modelling combines the results obtained from computational methodologies applicable at different length and time scales. Electron density functional theory calculations were used for determining the energetics of the elementary processes of hydrogen in tungsten, such as diffusivity and trapping to vacancies and surfaces. Results from the energetics of pure tungsten defects were used in the development of an classical bond-order potential for describing the tungsten defects to be used in molecular dynamics simulations. The developed potential was utilized in determination of the defect clustering and annihilation properties. These results were further employed in binary collision and rate theory calculations to determine the evolution of large defect clusters that trap hydrogen in the course of implantation. The computational results for the defect and trapped hydrogen concentrations were successfully compared with the experimental results. With the aforedescribed multiscale analysis the experimental results within this thesis and found in the literature were explained both quantitatively and qualitatively.

Characterisation of head-hardened rail steel in terms of cyclic plasticity response and microstructure for improved material modelling

Stress- and strain-controlled tests of heat treated high-strength rail steel (Australian Standard AS1085.1) have been performed in order to improve the characterisation of the said material׳s ratcheting and fatigue wear behaviour. The hardness of the rail head material has also been studied and it has been found that hardness reduces considerably below four-millimetres from the rail top surface. Historically, researchers have used test coupons with circular cross-sections to conduct cyclic load tests. Such test coupons, typically five-millimetres in gauge diameter and ten‐millimetres in grip diameter, are usually taken from the rail head sample. When there is considerable variation of material properties over the cross-section it becomes likely that localised properties of the rail material will be missed. In another case from the literature, disks 47 mm in diameter for a twin-disk rolling contact test machine were obtained directly from the rail sample and used to validate ratcheting and rolling contact fatigue wear models. The question arises: How accurate are such tests, especially when large material property gradients exist? In this research paper, the effects of rail sampling location on the ratcheting behaviour of AS1085.1 rail steel were investigated using rectangular-shaped specimens obtained at four different depths to observe their respective cyclic plasticity behaviour. The microstructural features of the test coupons were also analysed, especially the pearlite inter-lamellar spacing which showed strong correlation with both hardness and cyclic plasticity behaviour of the material. This work ultimately provides new data and testing methodology to aid the selection of valid parameters for material constitutive models to better understand rail surface ratcheting and wear.

Pelon ja toivon välissä : Pätkätyöläisen urakerronta

This study analyzes the forming of the occupational identity of the well-educated fixed-term employees. Fixed-term employment contracts amongst the well-educated labour force are exceptionally common in Finland as compared to other European countries. Two groups of modern fixed-term employees are distinguished. The first comprises well-educated women employed in the public sector whose fixed-term employment often consists of successive periods as temporary substitutes. The other group comprises well-educated, upper white-collar men aged over 40, whose fixed-term employment careers often consist of jobs of project nature or posts that are filled for a fixed period only. Method of the study For the empirical data I interviewed 35 persons (26 women and 9 men) in 33 interviews, one of which was conducted by e-mail and one was a group interview. All the interviews were electronically recorded and coded. All the interviewees have two things in common: fixed-term employment and formal high education. Thirteen (13) of them are researchers, four nurses, four midwives, four journalists, and ten project experts. I used the snowball method to get in touch the interviewees. The first interviewees were those who were recommended by the trade unions and by my personal acquaintances. These interviewees, in turn, recommended other potential interviewees. In addition, announcements on the internet pages of the trade unions were used to reach other interviewees. In analysing process I read the research material several times to find the turning points in the narrative the interviewees told. I also searched for the most meaningful stories told and the meaning the interviewees gave to these stories and to the whole narrative. In addition to that I paid attention to co-production of the narrative with the interviewees and analyzed the narrative as performance to be able to search for the preferred identities the interviewees perform. (Riesman 2001, 698-701). I do not pay much attention to the question of truth of a narrative in the sense of its correspondence with facts; rather I think a working life narrative has two tasks: On the one hand one has to tell the facts and on the other hand, he/she has to describe the meaning of these facts to herself/himself. To emphasize the double nature of the narrative about one’s working life I analyzed the empirical data both by categorizing it according to the cultural models of storytelling (heroic story, comedy, irony and tragedy) and by studying the themes most of the interviewees talked about. Ethics of the study I chose to use narrative within qualitative interviews on the grounds that in my opinion is more ethical and more empowering than the more traditional structured interview methods. During the research process I carefully followed the ethical rules of a qualitative research. The purpose of the interviews and the research was told to the interviewees by giving them a written description of the study. Oral permission to use the interview in this research was obtained from the interviewees. The names and places, which are mentioned in the study, are changed to conceal the actual identity of the interviewees. I shared the analysis with the interviewees by sending each of them the first analysis of their personal interview. This way I asked them to make sure that the identity was hidden well enough and hoped to give interviewees a chance to look at their narratives, to instigate new actions and sustain the present one (Smith 2001, 721). Also I hoped to enjoy a new possibility of joint authorship. Main results As a result of the study I introduce six models of telling a story. The four typical western cultural models that guide the telling are: heroic story, comedy, tragedy and satirical story (Hänninen 1999). In addition to these models I found two ways of telling a career filled with fixed-term employments that differ significantly from traditional career story telling. However, the story models in which the interviewees pour their experience locates the fixed term employers work career in an imagined life trajectory and reveals the meaning they give to it. I analyze the many sided heroic story that Liisa tells as an example of the strength of the fear of failing or losing the job the fixed term employee feels. By this structure it is also possible to show that success is felt to be entirely a matter of chance. Tragedy, the failure in one’s trial to get something, is a model I introduce with the help of Vilppu’s story. This narrative gets its meaning both from the sorrow of the failure in the past and the rise of something new the teller has found. Aino tells her story as a comedy. By introducing her narrative, I suggest that the purpose of the comedy, a stronger social consensus, gets deeper and darker shade by fixed-term employment: one who works as a fixed term employee has to take his/her place in his/her work community by him/herself without the support the community gives to those in permanent position. By studying the satiric model Rauno uses, I argue that using irony both turns the power structures to a carnival and builds free space to the teller of the story and to the listener. Irony also helps in building a consensus, mutual understanding, between the teller and the listener and it shows the distance the teller tells to exist between him and others. Irony, however, demands some kind of success in one’s occupational career but also at least a minor disappointment in the progress of it. Helmi tells her story merely as a detective story. By introducing Helmi’s narrative, I argue that this story model strengthens the trust in fairness of the society the teller and the listener share. The analysis also emphasizes the central position of identity work, which is caused by fixed-term employment. Most of the interviewees talked about getting along in working life. I introduced Sari’s narrative as an example of this. In both of these latter narratives one’s personal character and habits are lifted as permanent parts of the actual professional expertise, which in turn varies according to different situations. By introducing these models, I reveal that the fixed-term employees have different strategies to cope with their job situations and these strategies vary according to their personal motives and situations and the actual purpose of the interview. However, I argue that they feel the space between their hopes and fears narrow and unsecure. In the research report I also introduce pieces of the stories – themes – that the interviewees use to build these survival strategies. They use their personal curriculum vitae or portfolio, their position in work community and their work morals to build their professional identity. Professional identity is flexible and varies in time and place, but even then it offers a tool to fix one’s identity work into something. It offers a viewpoint to society and a tool to measure one’s position in surrounding social nets. As one result of the study I analyze the position the fixed-term employees share on the edge of their job communities. I summarize the hopes and fears the interviewees have concerning employers, trade unions, educational institutions and the whole society. In their opinion, the solidarity between people has been weakened by the short-sighted power of the economy. The impact the fixed-term employment has on one’s professional identity and social capital is a many-sided and versatile process. Fixed-term employment both strengthens and weakens the professional identity, social capital and the building of trust. Fixed-term employment also affects one’s day-to-day life by excluding her/him from the norm and by one’s difficulty in making long-term plans (Jokinen 2005). Regardless of the nature of the job contract, the workers themselves are experts in making the best of their sometimes less than satisfying work life and they also build their professional identity by using creatively their education, work experiences and interpersonal relations. However, a long career of short fixed-term employments may seriously change the perception of employee about his/her role. He/she may start concentrating only in coping in his/her unsatisfactory situation and leaves the active improvement of the lousy working conditions to other people. Keywords: narrative, fixed-tem employment, occupational identity, work, story model, social capital, career  

Yrittäjyyden arvottaminen akateemisten nuorten argumentoinnissa

Evaluation of entrepreneurship in the speech of academic students and newly qualified young academics a summary of a qualitative attitude study. In Finland very few university students plan to become entrepreneurs. The aim of this research was to examine entrepreneurial attitudes expressed in speech. The material was gathered from interviews with university students and newly qualified young academic adults. The interviewees commented on twelve different sentences with claims formulated using research literature and views that have appeared in public discussions. The interviewees were divided into three different groups based on their self-expressed entrepreneurial intentions. The method of qualitative attitude research (Vesala & Rantanen 1999, 2007) was used in the interviews. The research material was studied using two interpretative theories: (1) The planned behaviour theory (Ajzen 1985, 1991a, b), which makes it possible to focus on the separate elements (attitude towards an act, subjective norms and perceived feasibility) necessary for intentions to develop; and (2) The theory of the two images of entrepreneurship (Vesala 1996), where individualism and relationism can be seen as resources for evaluating entrepreneurship. The subject of the research was how university students and newly qualified young adults viewed entrepreneurship as a general phenomen and in relation to the academic world. A second focus was on the attitudes expressed toward entrepreneurial university education and the possibility of combining entrepreneurship and academic knowledge. Of interest were also questions such as whether academic studies, knowledge and the university itself are resources or barriers to entrepreneurial intentions and entrepreneurship whether university students received any support for their entrepreneurial ambitions from the university and their fellow academic students. The problems tackled by this research were thus the following: How was entrepreneurship seen, both as a general phenomen and in an academic context, when it was evaluated positively, negatively or neutrally by the interviewees? In what way was entrepreneurship constructed in the interviewees attitudes? How were entrepreneurship and the academic world related in the interviewees attitudes? What kind of role did the university as an academic context play in the interviewees attitudes for example were university education and academic knowledge seen as resources or barriers to their entrepreneurial intentions. Traditional attitude studies claim that attitudes are a stable property of an individual. In contrast, rhetorical social psychological and qualitative attitude studies emphasize the contextual and linguistic aspects of attitude, and they offered an alternative viewpoint for this research. The study was based on two general assumptions: attitudes have objects and are evaluative. Here attitude was defined as an evaluative interpresentation made towards an object; adopting an attitude is a contextual process in the sense that attitudes are always concerned with the action context of the persons presenting them. Entrepreneurship, both as a general phenomen and in an academic context, was specified as the object to which an attitude was taken. From a theoretical point of view, qualitative methods suited the general structure of this research well. In a particular, qualitative approach which emphasized contextual elements proved to be both empirically valid and useful for avoiding the problematic assumptions associated with traditional attitude study. The subject of the analysis was the argumentative speech produced by the interviewees. The results of the study show the subjects responses to three main ways of viewing entrepreneurships. The first was an individualistic, ideal image of entrepreneurship. This was mostly evaluated positively and gained wide approval especially among interviewees who included entrepreneurship among their employment choices. Entrepreneurship was seen as the decision to earn one s living independently. In this individualistic image of entrepreneurship, the social context was hardly ever mentioned. Elements which were seen to threaten this ideal image were evaluated negatively. When entrepreneurship was evaluated negatively using the individualistic image of entrepreneurship, it was mentioned that it forced one into a never ending cycle of work and uninterested duties. The relationistic image of entrepreneurship was used as a speech resource when the social context was constructed as an economic resource or a threat to the ideal image of entrepreneurship. In the second view, entrepreneurship was characteristically seen as being based on economics, which was seen as a threat to the ideal individualistic image of entrepreneurship. The risk of economic failure was seen as a limiting factor to entrepreneurial ambitions as it forced entrepreneurs to work around the clock. The third view concerned the relationship between entrepreneurship and the academic world. Entrepreneurship as an employment choice for university educated persons was evaluated as relevant, and thus positively, when university education was constructed as a resource for entrepreneurship - and irrelevant and thus negatively when it was construed as an obstacle, too wide, or when successful entrepreneurship was seen as being mostly based on an individual s personal characteristics. The interviewees with no entrepreneurial intentions expressed the view that academic education didn t provide the proper skills and knowledge for entrepreneurship. The interviewees also expressed interest in university entrepreneurship education, although none had experience on this. The interviewees emphasized the fact that the University didn t encourage them to consider entrepreneurship as a relevant employment choice. The assumption made by this study was that becoming an entrepreneur is a conscious decision, the environment may influence an individual s decisions on how to make a living as it tends to socialise people to act in accordance with cultural traditions. Keywords: Entrepreneurship, Attitudes towards entrepreneurship, Intentional behaviour, Entrepreneurial intention, University entrepreneurship education, Qualitative attitude research (Vesala & Rantanen 1999, 2007), Rhetorical social psychology (Billig 1986), The theory of entrepreneuship s two images: individualism and relationism (Vesala 1996 ), The planned behaviour theory (Ajzen 1985, 1991a, b)