Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes

As the relative performance of alkali activated slag (AAS) concretes in comparison to Portland cement (PC) counterparts for chloride transport and resulting corrosion of steel bars is not clear, an investigation was carried out and the results are reported in this paper. The effect of alkali concentration and modulus of sodium silicate solution used in AAS was studied. Chloride transport and corrosion properties were assessed with the help of electrical resistivity, non-steady state chloride diffusivity, onset of corrosion, rate of corrosion and pore solution chemistry. It was found that: (i) although chloride content at surface was higher for the AAS concretes, they had lower chloride diffusivity than PC concrete; (ii) pore structure, ionic exchange and interaction effect of hydrates strongly influenced the chloride transport in the AAS concretes; (iii) steel corrosion resistance of the AAS concretes was comparable to that of PC concrete under intermittent chloride ponding regime, with the exception of 6% Na2O and Ms of 1.5; (iv) the corrosion behaviour of the AAS concretes was significantly influenced by ionic exchange, carbonation and sulphide concentration; (v) the increase of alkali concentration of the activator generally increased the resistance of AAS concretes to chloride transport and reduced its resulting corrosion, and a value of 1.5 was found to be an optimum modulus for the activator for improving the chloride transport and the corrosion resistance.

Chloride induced corrosion of steel bars in alkali activated slag concretes

The studies on chloride induced corrosion of steel bars in alkali activated slag (AAS) concretes are scarcely reported in the past. In order to make this issue clearer and compare the corrosion performance of AAS with Portland cement (PC) counterpart, an investigation was carried out and the results are reported in this paper. Corrosion properties were assessed with the help of rate of corrosion, electrical resistivity and pore solution chemistry. It was found that: (i) steel corrosion resistance of the AAS concretes was comparable or in some cases even worse than that of Portland cement (PC) concrete under intermittent chloride ponding regime; (ii) the corrosion behaviour of the AAS concretes was significantly influenced by ionic exchange, carbonation and sulphide concentration; (iii) the increase of alkali concentration of the activator generally reduced chloride resulting corrosion, and a value of 1.5 was found to be an optimum modulus for the activator for improving the corrosion resistance.

Influence of service loading and the resulting micro-cracks on chloride resistance of concrete

Chloride-induced corrosion of steel in reinforced concrete structures is one of the main problems affecting their durability, but most previous research projects and case studies have focused on concretes without cracks or not subjected to any structural load. Although it has been recognised that structural cracks do influence the chloride transport and chloride induced corrosion in reinforced concrete structures, there is little published work on the influence of micro-cracks due to service loads on these properties. Therefore the effect of micro-cracks caused by loading on chloride transport into concrete was studied. Four different stress levels (0%, 25%, 50% and 75% of the stress at ultimate load – fu) were applied to 100 mm diameter concrete discs and chloride migration was measured using a bespoke test setup based on the NT BUILD 492 test. The effects of replacing Portland cement CEMI by ground granulated blast-furnace slag (GGBS), pulverised fuel ash (PFA) and silica fume (SF) on chloride transport in concrete under sustained loading were studied. The results have indicated that chloride migration coefficients changed little when the stress level was below 50% of the fu; however, it is desirable to keep concrete stress less than 25% fu if this is practical. The effect of removing the load on the change of chloride migration coefficient was also studied. A recovery of around 50% of the increased chloride migration coefficient was found in the case of concretes subjected to 75% of the fu when the load was removed.

Effect of Cyclic Carbonation on Chloride Ingression in GGBS Concrete

Carbonation and chloride ingress are the two main causes of corrosion in reinforced concrete structures. An investigation to monitor the ingress of chlorides and the effect of carbonation on chloride ingression during an accelerated 12 month cyclic wetting and drying exposure regime that simulates conditions in which multiple mode transport mechanisms are active was conducted on ground granulated blast furnace slag (GGBS) concrete. The penetration of chloride and carbon dioxide was evaluated using water and acid soluble chloride profiles and phenolphthalein indicator, respectively. The results indicated that when chloride and carbon dioxide ingress concomitantly the effects can be adverse. Carbonation has a detrimental effect on the binding capacity of the concrete, increasing the concentration of free (water soluble) chlorides. This contributed to greater concentration and greater penetration of chlorides and thus an increased corrosion risk.

Construction and evaluation of cysteine selective electrodes for FIA analysis of pharmaceuticals

A flow injection analysis (FIA) system comprising a cysteine selective electrode as detection system was developed for determination of this amino acid in pharmaceuticals. Several electrodes were constructed for this purpose, having PVC membranes with different ionic exchangers and mediator solvents. Better working characteristics were attained with membranes comprising o-nitrophenyl octyl ether as mediator solvent and a tetraphenylborate based ionic-sensor. Injection of 500 µL standard solutions into an ionic strength adjuster carrier (3x10-3 M) of barium chloride flowing at 2.4mL min-1, showed linearity ranges from 5.0x10-5 to 5.0x10-3 M, with slopes of 76.4±0.6mV decade-1 and R2>0.9935. Slope decreased significantly under the requirement of a pH adjustment, selected at 4.5. Interference of several compounds (sodium, potassium, magnesium, barium, glucose, fructose, and sucrose) was estimated by potentiometric selectivity coefficients and considered negligible. Analysis of real samples were performed and considered accurate, with a relative error to an independent method of +2.7%.

Desenvolvimento e aplicação de um biossensor para monitorização de creatinina, um biomarcador associado a doenças emergentes

Este trabalho descreve o desenvolvimento de um material sensor para creatinina por impressão molecular em estrutura polimérica (MIP) e a sua aplicação no desenvolvimento de um dispositivo de natureza potenciométrica para a determinação da molécula alvo em fluidos biológicos. A creatinina é um dos biomarcadores mais utilizados no acompanhamento da doença renal, já que é um bom indicador da taxa de filtração glomerular (TFG). Os materiais biomiméticos desenhados para interação com a creatinina foram obtidos por polimerização radicalar, recorrendo a monómeros de ácido metacríclico ou de vinilpiridina e a um agente de reticulação apropriado. De modo a aferir o efeito da impressão da creatinina na resposta dos materiais MIP à sua presença, foram também preparados e avaliados materiais de controlo, obtidos sem impressão molecular (NIP). O controlo da constituição química destes materiais, incluindo a extração da molécula impressa, foi realizado por Espectroscopia de Raman e de Infravermelho com Transformada de Fourrier. A afinidade de ligação entre estes materiais e a creatinina foi também avaliada com base em estudos cinéticos. Todos os materiais descritos foram integrados em membranas selectivas de elétrodos seletivos de ião, preparadas sem ou com aditivo iónico lipófilo, de carga negativa ou positiva. A avaliação das características gerais de funcionamento destes elétrodos, em meios de composição e pH diferentes, indicaram que as membranas com materiais impressos e aditivo aniónico eram as únicas com utilidade analítica. Os melhores resultados foram obtidos em solução tampão Piperazine-N,N′-bis(2- ethanesulfonic acid), PIPES, de pH 2,8, condição que permitiu obter uma resposta quasi-Nernstiana, a partir de 1,6×10-5 mol L-1. Estes elétrodos demonstraram ainda uma boa selectividade ao apresentaram uma resposta preferencial para a creatinina quando na presença de ureia, carnitina, glucose, ácido ascórbico, albumina, cloreto de cálcio, cloreto de potássio, cloreto de sódio e sulfato de magnésio. Os elétrodos foram ainda aplicados com sucesso na análise de amostras sintéticas de urina, quando os materiais sensores eram baseados em ácido metacrilico, e soro, quando os materiais sensores utilizados eram baseados em vinilpiridina.

Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mV/Δlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL−1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ± 0.7%), fast response, good sensitivity (47 mV/Δlog([ENR]/M), wide linear range (1.0 × 10−5–1.0 × 10−3 M), low detection limit (0.9 µg mL−1), and a stable baseline for a 5 × 10−2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.

Métabolisme du magnésium pour le clinicien : une mise au point actuelle et simple [Magnesium metabolism for clinical practioner : an up to date review]

La mesure de la fraction libre du magnésium circulant est désormais possible grâce aux électrodes sélectives. Lors d'une déplétion magnésique l'enquête étiologique est orientée par la comparaison de la magnésiurie et de la magnésémie. Les syndromes de Bortter, ou alcaloses hypokaliémiques d'origine rénale, sont des tubulopathies primitives définies par des signes simples: tension artérielle normale; alcalose hypokaliémiques; excrétion rénale conservée des chlorures et recherche de diurétiques négative dans les urines. Grâce à la mesure de la magnésémie et de la calciurie on distingue au moins deux alcaloses hypokaliémiques d'origine rénale, la maladie de Gitelman et le syndrome de Bartter au sens strict.

The Na+-dependent chloride-bicarbonate exchanger SLC4A8 mediates an electroneutral Na+ reabsorption process in the renal cortical collecting ducts of mice.

Regulation of sodium balance is a critical factor in the maintenance of euvolemia, and dysregulation of renal sodium excretion results in disorders of altered intravascular volume, such as hypertension. The amiloride-sensitive epithelial sodium channel (ENaC) is thought to be the only mechanism for sodium transport in the cortical collecting duct (CCD) of the kidney. However, it has been found that much of the sodium absorption in the CCD is actually amiloride insensitive and sensitive to thiazide diuretics, which also block the Na-Cl cotransporter (NCC) located in the distal convoluted tubule. In this study, we have demonstrated the presence of electroneutral, amiloride-resistant, thiazide-sensitive, transepithelial NaCl absorption in mouse CCDs, which persists even with genetic disruption of ENaC. Furthermore, hydrochlorothiazide (HCTZ) increased excretion of Na+ and Cl- in mice devoid of the thiazide target NCC, suggesting that an additional mechanism might account for this effect. Studies on isolated CCDs suggested that the parallel action of the Na+-driven Cl-/HCO3- exchanger (NDCBE/SLC4A8) and the Na+-independent Cl-/HCO3- exchanger (pendrin/SLC26A4) accounted for the electroneutral thiazide-sensitive sodium transport. Furthermore, genetic ablation of SLC4A8 abolished thiazide-sensitive NaCl transport in the CCD. These studies establish what we believe to be a novel role for NDCBE in mediating substantial Na+ reabsorption in the CCD and suggest a role for this transporter in the regulation of fluid homeostasis in mice.

Developmental variations in the peripheral erythrocytic system of the rainbow trout, Salmo gairdneri

The peripheral circulating erythrocytic system of the rainbow trout, l3 almo gairdner , was examined in vitro in relation differences in the morphology and multiple hemoglobin system organization of adult and juvenile red cells. Cells were separated by velocity sedimentation under unit gravity, a procedure requiring red cell exposure to an incubation medium for periods of at least three hours. Therefore , this must provide an environment in which red cells remain in a condition approximaing normalcy. Previous studies having demonstrated commonly employed media to be ineffective in this regard , a medium was developed through modification of Cortl and saline. One of the principal additions to this me dium , norepinephrine, altered cell regulation of intracellular calcium, magnesium and chloride concentrations. Catecholamine involvement was also suggeste d in the synthes is of hemoglobin . The procedure was found to separtate cells primarily by density and, to a lesser extent, by shape. Characterization of red cells revealed two subpopulations to exist . The first comprised the bulk of the cell population, and were of greater l ength, width, volume and major:minor axis ratio than the smaller population; these were adult cells. The later, juvenile cells were of smaller overall size and were more spherical in shape . Juvenile cells also possessed fewer electrophore tpically distinguishable isomorphs than did adults with only eight of eleven hemoglobin component s typically found With maturation,hemoglobin complement with the development of three more bands. The total complement of the adult cell contained 7 cathodal bands and four anodal hemoglobin isomorphs. Bands acquired with maturation comprised the smallest percentage of the cells hemoglobin. each averaging less than one-percent of the total. Whether these additional bands are derived through degradation and reaggregation of existing components or are the product of pe gQy2 synthesis is not yet known.

Influence of temperature and photoperiod upon ionic regulation in rainbow trout Salmo gairdneri

Interactions of photoperiod and temperature upon waterelectrolyte balance were examined in rainbow trout acclimated to six combinations of two photoperiods {18h light: 6h dark, o 6h light: l8h dark) and three temperatures (2, 10 and 18 C). The influence of temperature and photoperiod upon plasma, skeletal muscle, cardiac muscle and liver levels of sodium, potassium, magnesi.um, calcium, chloride, water content, water distribution and cellular ion concentrations was determined by a one way analysis of variance. Significant (p < 0.05 or better) temperature effects at common photoperiods were observed in 70% of the analyses performed, showing no bias toward either photoperiod. Significant photoperiod effects occured in 57% of the analyses performed at common temperatures. The influence of photoperiod was most prevalent at reduced temperatures. Potassium and magnesium appeared to be particularly thermosensitive, while sodium and calcium were the most photosensitive of the electrolytes. The ionic composition of all tissues studied were relatively thermosensitive, with liver apparently being the most sensitive. On the other hand; the ionic composition of skeletal and cardiac muscle appear to be the mos.t photosensitive of the tissues examined. Water content and distribution in skeletal muscle and liver were significantly influenced by temperature in 50% of the analyses performed showing a very strong bias toward UwinterU animals. Photoperiod effects were significant in 56% of the water parameters measured with a strong bias toward the two lower temperatures. Body weight was of significant influence in 16% of the 174 analyses performed. These data are discussed in terms of the effect of temperature upon ionregulatory mechanisms and the possible impact of photoperiod variations on endocrine systems influencing water-electrolyte metabolism.

Investigations in flow injection analysis (FIA): conventional FIA determination of chloride in water; sequential injection (SI)-FIA determination of mercury in water

Flow injection analysis (FIA) was applied to the determination of both chloride ion and mercury in water. Conventional FIA was employed for the chloride study. Investigations of the Fe3 +/Hg(SCN)2/CI-,450 nm spectrophotometric system for chloride determination led to the discovery of an absorbance in the 250-260 nm region when Hg(SCN)2 and CI- are combined in solution, in the absence of iron(III). Employing an in-house FIA system, absorbance observed at 254 nm exhibited a linear relation from essentially 0 - 2000 Jlg ml- 1 injected chloride. This linear range spanning three orders of magnitude is superior to the Fe3+/Hg(SCN)2/CI- system currently employed by laboratories worldwide. The detection limit obtainable with the proposed method was determin~d to be 0.16 Jlg ml- 1 and the relative standard deviation was determined to be 3.5 % over the concentration range of 0-200 Jig ml- 1. Other halogen ions were found to interfere with chloride determination at 254 nm whereas cations did not interfere. This system was successfully applied to the determination of chloride ion in laboratory water. Sequential injection (SI)-FIA was employed for mercury determination in water with the PSA Galahad mercury amalgamation, and Merlin mercury fluorescence detection systems. Initial mercury in air determinations involved injections of mercury saturated air directly into the Galahad whereas mercury in water determinations involved solution delivery via peristaltic pump to a gas/liquid separator, after reduction by stannous chloride. A series of changes were made to the internal hardware and valving systems of the Galahad mercury preconcentrator. Sequential injection solution delivery replaced the continuous peristaltic pump system and computer control was implemented to control and integrate all aspects of solution delivery, sample preconcentration and signal processing. Detection limits currently obtainable with this system are 0.1 ng ml-1 HgO.

Characterisation and optimisation of the flavour of health-promoting, plantderived bitterants in functional beverages.

Flavour is a combination of taste, odour, and chemesthetic sensations. Close associations exist between these sensory modalities, and thus, the overall flavour of a food or beverage product can change when the intensity of one or more of these sensations is altered. Strategies to modify flavour are often utilized by the food industry, and are central to the engineering of new and reformulated products. For functional food and beverages, flavour modification is particularly important, as fortifying agents can elicit high levels of less than desirable sensations, such as bitterness and astringency. The application of various flavour modifying strategies can decrease the perceived intensity of these sensations, and in tum, improve the sensory profile of the product. This collection of studies describes the sensory characteristics of experimental functional beverages fortified with trans-resveratrol, (+)-catechin, and/or caffeine, and examines the impact of novel flavour modifying strategies on the perceived flavour of these beverages. In the first study, results demonstrate that the flavour profile of Cabemet Sauvignon wines fortified with 20 mglL and 200 mg/L of trans-resveratrol is not perceived as different compared to control wine (0 mglL). However, Riesling wine fortified with 200 mg/L is perceived as significantly higher in bitterness compared to 20 mglL and control. For some functional food formulations, alternative strategies for flavour modification are needed. Traditional methods, such as the addition of sucrose and sodium chloride, may decrease the perceived 'healthiness' of a product, and thus, may be sub-optimal. In a second study, high and low concentrations of five different bitter inhibiting compounds - 'bitter blockers' - (B-cyclodextrin, homoeridictyol sodium salt, carboxymethylcellulose - low viscosity, zinc sulfate, magnesium sulfate) were tested for their efficacy towards decreasing the bitterness of high and low concentrations of caffeine and (+)catechin - two health-relevant, plant-derived bitterants. B-cyclodextrin and homoeridictyol sodium salt were the most effective blockers at decreasing (+ )-catechin and caffeine, respectively. In addition to bitter blockers, additional flavour modifying strategies, either alone or in combination - may also be successful in functional food formulations. Both sucrose and rebaudioside A - a plant-derived sweetener - were effective at decreasing the bitterness of (+)catechin. When added to (+)-catechin along with B-cyc1odextrin, both sweeteners provided the most effective decrease in bitterness compared to binary, ternary, or quaternary mixtures of (+)catechin together with bitter blockers, sweeteners, andlor odourants. The perceived intensity of sensations elicited by sweeteners and odourants was not affected by the addition of bitter blockers, and thus, their impact within these complex matrices is minimal. In addition, withinmodal (taste-taste) compared to cross-modal (taste-odour) sensory interactions were more effective at decreasing the bitterness of (+ )-catechin. Overall, results from these studies demonstrate that certain novel, alternative flavour modifying approaches may be successful towards lowering the bitterness and astringency elicited by (+ )-catechin and caffeine in aqueous solutions.

Rotational analysis of the 5 1 0 6 1 0 band of formyl chloride

Please consult the paper edition of this thesis to read. It is available on the 5th Floor of the Library at Call Number: Z 9999 C54 L434 1989