A review of system safety failure probability objectives for Unmanned Aircraft Systems

Unmanned Aircraft Systems (UAS) are one of a number of emerging aviation sectors. Such new aviation concepts present a significant challenge to National Aviation Authorities (NAAs) charged with ensuring the safety of their operation within the existing airspace system. There is significant heritage in the existing body of aviation safety regulations for Conventionally Piloted Aircraft (CPA). It can be argued that the promulgation of these regulations has delivered a level of safety tolerable to society, thus justifying the “default position” of applying these same standards, regulations and regulatory structures to emerging aviation concepts such as UAS. An example of this is the proposed “1309” regulation for UAS, which is based on the 1309 regulation for CPA. However, the absence of a pilot on-board an unmanned aircraft creates a fundamentally different risk paradigm to that of CPA. An appreciation of these differences is essential to the justification of the “default position” and in turn, to ensure the development of effective safety standards and regulations for UAS. This paper explores the suitability of the proposed “1309” regulation for UAS. A detailed review of the proposed regulation is provided and a number of key assumptions are identified and discussed. A high-level model characterising the expected number of third party fatalities on the ground is then used to determine the impact of these assumptions. The results clearly show that the “one size fits all” approach to the definition of 1309 regulations for UAS, which mandates equipment design and installation requirements independent of where the UAS is to be operated, will not lead to an effective management of the risks.

Australian Learning and Teaching Council, Learning and Teaching Academic Standards Statement for Architecture

The development of the Learning and Teaching Academic Standards Statement for Architecture (the Statement) centred on requirements for the Master of Architecture and proceeded alongside similar developments in the building and construction discipline under the guidance and support of the Australian Deans of Built Environment and Design (ADBED). Through their representation of Australian architecture programs, ADBED have provided high-level leadership for the Learning and Teaching Academic Standards Project in Architecture (LTAS Architecture). The threshold learning outcomes (TLOs), the description of the nature and extent of the discipline, and accompanying notes were developed through wide consultation with the discipline and profession nationally. They have been considered and debated by ADBED on a number of occasions and have, in their fi nal form, been strongly endorsed by the Deans. ADBED formed the core of the Architecture Reference Group (chaired by an ADBED member) that drew together representatives of every peak organisation for the profession and discipline in Australia. The views of the architectural education community and profession have been provided both through individual submissions and the voices of a number of peak bodies. Over two hundred individuals from the practising profession, the academic workforce and the student cohort have worked together to build consensus about the capabilities expected of a graduate of an Australian Master of Architecture degree. It was critical from the outset that the Statement should embrace the wisdom of the greater ‘tribe’, should ensure that graduates of the Australian Master of Architecture were eligible for professional registration and, at the same time, should allow for scope and diversity in the shape of Australian architectural education. A consultation strategy adopted by the Discipline Scholar involved meetings and workshops in Perth, Melbourne, Sydney, Canberra and Brisbane. Stakeholders from all jurisdictions and most universities participated in the early phases of consultation through a series of workshops that concluded late in October 2010. The Draft Architecture Standards Statement was formed from these early meetings and consultation in respect of that document continued through early 2011. This publication represents the outcomes of work to establish an agreed standards statement for the Master of Architecture. Significant further work remains to ensure the alignment of professional accreditation and recognition procedures with emerging regulatory frameworks cascading from the establishment of the Tertiary Education Quality and Standards Agency (TEQSA). The Australian architecture community hopes that mechanisms can be found to integrate TEQSA’s quality assurance purpose with well-established and understood systems of professional accreditation to ensure the good standing of Australian architectural education into the future. The work to build renewed and integrated quality assurance processes and to foster the interests of this project will continue, for at least the next eighteen months, under the auspices of Australian Learning and Teaching Council (ALTC)-funded Architecture Discipline Network (ADN), led by ADBED and Queensland University of Technology. The Discipline Scholar gratefully acknowledges the generous contributions given by those in stakeholder communities to the formulation of the Statement. Professional and academic colleagues have travelled and gathered to shape the Standards Statement. Debate has been vigorous and spirited and the Statement is rich with the purpose, critical thinking and good judgement of the Australian architectural education community. The commitments made to the processes that have produced this Statement reflect a deep and abiding interest by the constituency in architectural education. This commitment bodes well for the vibrancy and productivity of the emergent Architecture Discipline Network (ADN). Endorsement, in writing, was received from the Australian Institute of Architects National Education Committee (AIA NEC): The National Education Committee (NEC) of the Australian Institute of Architects thank you for your work thus far in developing the Learning and Teaching Academic Standards for Architecture In particular, we acknowledge your close consultation with the NEC on the project along with a comprehensive cross-section of the professional and academic communities in architecture. The TLOs with the nuanced levels of capacities – to identify, develop, explain, demonstrate etc – are described at an appropriate level to be understood as minimum expectations for a Master of Architecture graduate. The Architects Accreditation Council of Australia (AACA) has noted: There is a clear correlation between the current processes for accreditation and what may be the procedures in the future following the current review. The requirement of the outcomes as outlined in the draft paper to demonstrate capability is an appropriate way of expressing the measure of whether the learning outcomes have been achieved. The measure of capability as described in the outcome statements is enhanced with explanatory descriptions in the accompanying notes.

Strategies to engage academics in assuring graduate attributes

Assurance of learning (AoL) is a predominant feature in both quality assurance and quality enhancement in higher education. The process may be used for program development, and to inform external accreditation and evaluation bodies. However, there is an obvious challenge in trying to get academic staff to buy into the benefits of the AoL process. This project conducted an audit across 25 Australian Business Schools. The majority of those interviewed stated that academic staff considered AoL to be extra work and viewed the process as a box ticking exercise for external bodies rather than sound educational practice. A change management process is required to promote the necessary cultural change to embed AoL into practice. This paper showcases some of the educational leadership strategies that have been successfully implemented across Australia to foster staff engagement in the AoL process. These include: strong senior management commitment and leadership demonstrating a constant and high level drive for staff engagement until AoL becomes an institutional norm; developing leadership and champions among unit and program level staff, to share practices and promote the benefits that come from engaging in the process; providing professional development opportunities to discuss and resolve difficulties and tensions around AoL; demonstrating success and effectiveness by selling staff on the evidence that AoL makes a difference; and making the process inclusive with academics collaborating in the development and implementation of the process.

Reconstructing the event stratigraphy from the complex structural - stratigraphic architecture of an Archaean volcanic – intrusive – sedimentary succession : the Boorara Domain, Eastern Goldfields Superterrane, Western Australia

Two main deformational phases are recognised in the Archaean Boorara Domain of the Kalgoorlie Terrane, Eastern Goldfields Superterrane, Yilgarn Craton, Western Australia, primarily involving southover- north thrust faulting that repeated and thickened the stratigraphy, followed by east northeast – west-southwest shortening that resulted in macroscale folding of the greenstone lithologies. The domain preserves mid-greenschist facies metamorphic grade, with an increase to lower amphibolite metamorphic grade towards the north of the region. As a result of the deformation and metamorphism, individual stratigraphic horizons are difficult to trace continuously throughout the entire domain. Volcanological and sedimentological textures and structures, primary lithological contacts, petrography and geochemistry have been used to correlate lithofacies between faultbounded structural blocks. The correlated stratigraphic sequence for the Boorara Domain comprises quartzo-feldspathic turbidite packages, overlain by high-Mg tholeiitic basalt (lower basalt), coherent and clastic dacite facies, intrusive and extrusive komatiite units, an overlying komatiitic basalt unit (upper basalt), and at the stratigraphic top of the sequence, volcaniclastic quartz-rich turbidites. Reconstruction of the stratigraphy and consideration of emplacement dynamics has allowed reconstruction of the emplacement history and setting of the preserved sequence. This involves a felsic, mafic and ultramafic magmatic system emplaced as high-level intrusions, with localised emergent volcanic centres, into a submarine basin in which active sedimentation was occurring.

Socioeconomic differences in takeaway food consumption among adults

Background In Australia and other developed countries, there are consistent and marked socioeconomic inequalities in health. Diet is a major contributing factor to the poorer health of lower socioeconomic groups: the dietary patterns of disadvantaged groups are least consistent with dietary recommendations for the prevention of diet-related chronic diseases compared with their more advantaged counterparts. Part of the reason that lower socioeconomic groups have poorer diets may be their consumption of takeaway foods. These foods typically have nutrient contents that fail to comply with the dietary recommendations for the prevention of chronic disease and associated risk factors. A high level of takeaway food consumption, therefore, may negatively influence overall dietary intakes and, consequently, lead to adverse health outcomes. Despite this, little attention has focused on the association between socioeconomic position (SEP) and takeaway food consumption, with the limited number of studies showing mixed results. Additionally, studies have been limited by only considering a narrow range of takeaway foods and not examining how different socioeconomic groups make choices that are more (or less) consistent with dietary recommendations. While a large number of earlier studies have consistently reported socioeconomically disadvantaged groups consume a lesser amount of fruit and vegetables, there is limited knowledge about the role of takeaway food in socioeconomic variations in fruit and vegetable intake. Furthermore, no known studies have investigated why there are socioeconomic differences in takeaway food consumption. The aims of this study are to: examine takeaway food consumption and the types of takeaway food consumed (healthy and less healthy) by different socioeconomic groups, to determine whether takeaway food consumption patterns explain socioeconomic variations in fruit and vegetable intake, and investigate the role of a range of psychosocial factors in explaining the association between SEP and takeaway food consumption and the choice of takeaway food. Methods This study used two cross-sectional population-based datasets: 1) the 1995 Australian National Nutrition Survey (NNS) which was conducted among a nationally representative sample of adults aged between 25.64 years (N = 7319, 61% response rate); and 2) the Food and Lifestyle Survey (FLS) which was conducted by the candidate and was undertaken among randomly selected adults aged between 25.64 years residing in Brisbane, Australia in 2009 (N = 903, 64% response rate). The FLS extended the NNS in several ways by describing current socioeconomic differences in takeaway food consumption patterns, formally assessing the mediated effect of takeaway food consumption to socioeconomic inequalities in fruit and vegetable intake, and also investigating whether (and which) psychosocial factors contributed to the observed socioeconomic variations in takeaway food consumption patterns. Results Approximately 32% of the NNS participants consumed takeaway food in the previous 24 hours and 38% of the FLS participants reported consuming takeaway food once a week or more. The results from analyses of the NNS and the FLS were somewhat mixed; however, disadvantaged groups were likely to consume a high level of �\less healthy. takeaway food compared with their more advantaged counterparts. The lower fruit and vegetable intake among lower socioeconomic groups was partly mediated by their high consumption of �\less healthy. takeaway food. Lower socioeconomic groups were more likely to have negative meal preparation behaviours and attitudes, and weaker health and nutrition-related beliefs and knowledge. Socioeconomic differences in takeaway food consumption were partly explained by meal preparation behaviours and attitudes, and these factors along with health and nutrition-related beliefs and knowledge appeared to contribute to the socioeconomic variations in choice of takeaway foods. Conclusion This thesis enhances our understanding of socioeconomic differences in dietary behaviours and the potential pathways by describing takeaway food consumption patterns by SEP, explaining the role of takeaway food consumption in socioeconomic inequalities in fruit and vegetable intake, and identifying the potential impact of psychosocial factors on socioeconomic differences in takeaway food consumption and the choice of takeaway food. Some important evidence is also provided for developing policies and effective intervention programs to improve the diet quality of the population, especially among lower socioeconomic groups. This thesis concludes with a discussion of a number of recommendations about future research and strategies to improve the dietary intake of the whole population, and especially among disadvantaged groups.

Fast power line detection and localization using steerable filter for active UAV guidance

In this paper we present a fast power line detection and localisation algorithm as well as propose a high-level guidance architecture for active vision-based Unmanned Aerial Vehicle (UAV) guidance. The detection stage is based on steerable filters for edge ridge detection, followed by a line fitting algorithm to refine candidate power lines in images. The guidance architecture assumes an UAV with an onboard Gimbal camera. We first control the position of the Gimbal such that the power line is in the field of view of the camera. Then its pose is used to generate the appropriate control commands such that the aircraft moves and flies above the lines. We present initial experimental results for the detection stage which shows that the proposed algorithm outperforms two state-of-the-art line detection algorithms for power line detection from aerial imagery.

A framework for life cycle cost estimation of a product family at the early stage of product development

A cost estimation method is required to estimate the life cycle cost of a product family at the early stage of product development in order to evaluate the product family design. There are difficulties with existing cost estimation techniques in estimating the life cycle cost for a product family at the early stage of product development. This paper proposes a framework that combines a knowledge based system and an activity based costing techniques in estimating the life cycle cost of a product family at the early stage of product development. The inputs of the framework are the product family structure and its sub function. The output of the framework is the life cycle cost of a product family that consists of all costs at each product family level and the costs of each product life cycle stage. The proposed framework provides a life cycle cost estimation tool for a product family at the early stage of product development using high level information as its input. The framework makes it possible to estimate the life cycle cost of various product family that use any types of product structure. It provides detailed information related to the activity and resource costs of both parts and products that can assist the designer in analyzing the cost of the product family design. In addition, it can reduce the required amount of information and time to construct the cost estimation system.

Automatic region-of-interest detection and prioritisation for visually optimised coding of low bit rate videos

The increasing popularity of video consumption from mobile devices requires an effective video coding strategy. To overcome diverse communication networks, video services often need to maintain sustainable quality when the available bandwidth is limited. One of the strategy for a visually-optimised video adaptation is by implementing a region-of-interest (ROI) based scalability, whereby important regions can be encoded at a higher quality while maintaining sufficient quality for the rest of the frame. The result is an improved perceived quality at the same bit rate as normal encoding, which is particularly obvious at the range of lower bit rate. However, because of the difficulties of predicting region-of-interest (ROI) accurately, there is a limited research and development of ROI-based video coding for general videos. In this paper, the phase spectrum quaternion of Fourier Transform (PQFT) method is adopted to determine the ROI. To improve the results of ROI detection, the saliency map from the PQFT is augmented with maps created from high level knowledge of factors that are known to attract human attention. Hence, maps that locate faces and emphasise the centre of the screen are used in combination with the saliency map to determine the ROI. The contribution of this paper lies on the automatic ROI detection technique for coding a low bit rate videos which include the ROI prioritisation technique to give different level of encoding qualities for multiple ROIs, and the evaluation of the proposed automatic ROI detection that is shown to have a close performance to human ROI, based on the eye fixation data.

The impact of a model of nurse education to improve knowledge and recognition of delirium in older persons by registered nurses

Introduction: Delirium is a serious issue associated with high morbidity and mortality in older hospitalised people. Early recognition enables diagnosis and treatment of underlying cause/s, which can lead to improved patient outcomes. However, research shows knowledge and accurate nurse recognition of delirium and is poor and lack of education appears to be a key issue related to this problem. Thus, the purpose of this randomised controlled trial (RCT) was to evaluate, in a sample of registered nurses, the usability and effectiveness of a web-based learning site, designed using constructivist learning principles, to improve acute care nurse knowledge and recognition of delirium. Prior to undertaking the RCT preliminary phases involving; validation of vignettes, video-taping five of the validated vignettes, website development and pilot testing were completed. Methods: The cluster RCT involved consenting registered nurse participants (N = 175) from twelve clinical areas within three acute health care facilities in Queensland, Australia. Data were collected through a variety of measures and instruments. Primary outcomes were improved ability of nurses to recognise delirium using written validated vignettes and improved knowledge of delirium using a delirium knowledge questionnaire. The secondary outcomes were aimed at determining nurse satisfaction and usability of the website. Primary outcome measures were taken at baseline (T1), directly after the intervention (T2) and two months later (T3). The secondary outcomes were measured at T2 by participants in the intervention group. Following baseline data collection remaining participants were assigned to either the intervention (n=75) or control (n=72) group. Participants in the intervention group were given access to the learning intervention while the control group continued to work in their clinical area and at that time, did not receive access to the learning intervention. Data from the primary outcome measures were examined in mixed model analyses. Results: Overall, the effect of the online learning intervention over time comparing the intervention group and the control group were positive. The intervention groups‘ scores were higher and the change over time results were statistically significant [T3 and T1 (t=3.78 p=<0.001) and T2 and T1 baseline (t=5.83 p=<0.001)]. Statistically significant improvements were also seen for delirium recognition when comparing T2 and T1 results (t=2.58 p=0.012) between the control and intervention group but not for changes in delirium recognition scores between the two groups from T3 and T1 (t=1.80 p=0.074). The majority of the participants rated the website highly on the visual, functional and content elements. Additionally, nearly 80% of the participants liked the overall website features and there were self-reported improvements in delirium knowledge and recognition by the registered nurses in the intervention group. Discussion: Findings from this study support the concept that online learning is an effective and satisfying method of information delivery. Embedded within a constructivist learning environment the site produced a high level of satisfaction and usability for the registered nurse end-users. Additionally, the results showed that the website significantly improved delirium knowledge & recognition scores and the improvement in delirium knowledge was retained at a two month follow-up. Given the strong effect of the intervention the online delirium intervention should be utilised as a way of providing information to registered nurses. It is envisaged that this knowledge would lead to improved recognition of delirium as well as improvement in patient outcomes however; translation of this knowledge attainment into clinical practice was outside the scope of this study. A critical next step is demonstrating the effect of the intervention in changing clinical behaviour, and improving patient health outcomes.

BabelFuse data fusion unit with precision wireless clock synchronisation

A significant issue encountered when fusing data received from multiple sensors is the accuracy of the timestamp associated with each piece of data. This is particularly important in applications such as Simultaneous Localisation and Mapping (SLAM) where vehicle velocity forms an important part of the mapping algorithms; on fastmoving vehicles, even millisecond inconsistencies in data timestamping can produce errors which need to be compensated for. The timestamping problem is compounded in a robot swarm environment due to the use of non-deterministic readily-available hardware (such as 802.11-based wireless) and inaccurate clock synchronisation protocols (such as Network Time Protocol (NTP)). As a result, the synchronisation of the clocks between robots can be out by tens-to-hundreds of milliseconds making correlation of data difficult and preventing the possibility of the units performing synchronised actions such as triggering cameras or intricate swarm manoeuvres. In this thesis, a complete data fusion unit is designed, implemented and tested. The unit, named BabelFuse, is able to accept sensor data from a number of low-speed communication buses (such as RS232, RS485 and CAN Bus) and also timestamp events that occur on General Purpose Input/Output (GPIO) pins referencing a submillisecondaccurate wirelessly-distributed "global" clock signal. In addition to its timestamping capabilities, it can also be used to trigger an attached camera at a predefined start time and frame rate. This functionality enables the creation of a wirelessly-synchronised distributed image acquisition system over a large geographic area; a real world application for this functionality is the creation of a platform to facilitate wirelessly-distributed 3D stereoscopic vision. A ‘best-practice’ design methodology is adopted within the project to ensure the final system operates according to its requirements. Initially, requirements are generated from which a high-level architecture is distilled. This architecture is then converted into a hardware specification and low-level design, which is then manufactured. The manufactured hardware is then verified to ensure it operates as designed and firmware and Linux Operating System (OS) drivers are written to provide the features and connectivity required of the system. Finally, integration testing is performed to ensure the unit functions as per its requirements. The BabelFuse System comprises of a single Grand Master unit which is responsible for maintaining the absolute value of the "global" clock. Slave nodes then determine their local clock o.set from that of the Grand Master via synchronisation events which occur multiple times per-second. The mechanism used for synchronising the clocks between the boards wirelessly makes use of specific hardware and a firmware protocol based on elements of the IEEE-1588 Precision Time Protocol (PTP). With the key requirement of the system being submillisecond-accurate clock synchronisation (as a basis for timestamping and camera triggering), automated testing is carried out to monitor the o.sets between each Slave and the Grand Master over time. A common strobe pulse is also sent to each unit for timestamping; the correlation between the timestamps of the di.erent units is used to validate the clock o.set results. Analysis of the automated test results show that the BabelFuse units are almost threemagnitudes more accurate than their requirement; clocks of the Slave and Grand Master units do not di.er by more than three microseconds over a running time of six hours and the mean clock o.set of Slaves to the Grand Master is less-than one microsecond. The common strobe pulse used to verify the clock o.set data yields a positive result with a maximum variation between units of less-than two microseconds and a mean value of less-than one microsecond. The camera triggering functionality is verified by connecting the trigger pulse output of each board to a four-channel digital oscilloscope and setting each unit to output a 100Hz periodic pulse with a common start time. The resulting waveform shows a maximum variation between the rising-edges of the pulses of approximately 39¥ìs, well below its target of 1ms.

Examining the health related quality of life of people with end stage kidney disease living in Hanoi, Vietnam

Background: The prevalence of end-stage kidney disease (ESKD) patients is increasing in Vietnam; however, the impact of ESKD and its treatment on a person’s quality of life (QOL) is not well understood. Objective: This research sought to examine the association between monthly income, comorbidity, length of time on dialysis, social support and health-related quality of life (HRQOL) among Vietnamese ESKD patients. Method: Using a descriptive design, 95 patients who were receiving haemodialysis (HD) and peritoneal dialysis (PD) from one hospital in Hanoi, were conveniently sampled. Results: ESKD patients reported having a moderate level of HRQOL. Factors associated with QOL were social support (r= .268, p<.05), comorbid health conditions (r= –.185, p<.05), and length of time on dialysis (r= .182, p<.05). However, monthly income was not significantly related to HRQOL (p>.05). Conclusion: The results seem to indicate that ESKD patients in Vietnam have a high level of support from family members, friends and significant others. There was also a negative impact of comorbid conditions on the QOL of these patients. Based on the results of this study, nurses ought to develop nursing interventions which will lead to a better QOL for patients, and further research into the QOL for ESKD patients in Vietnam is warranted.

A flexible asset maintenance decision-making process model

Optimal Asset Maintenance decisions are imperative for efficient asset management. Decision Support Systems are often used to help asset managers make maintenance decisions, but high quality decision support must be based on sound decision-making principles. For long-lived assets, a successful Asset Maintenance decision-making process must effectively handle multiple time scales. For example, high-level strategic plans are normally made for periods of years, while daily operational decisions may need to be made within a space of mere minutes. When making strategic decisions, one usually has the luxury of time to explore alternatives, whereas routine operational decisions must often be made with no time for contemplation. In this paper, we present an innovative, flexible decision-making process model which distinguishes meta-level decision making, i.e., deciding how to make decisions, from the information gathering and analysis steps required to make the decisions themselves. The new model can accommodate various decision types. Three industrial case studies are given to demonstrate its applicability.

Creating fashion professionals for the 21st century : a tale of pedagogical tensions and emerging challenges

The ‘Fashion Tales’ Conference identifies three fashion discourses: that of making, that of media, and that of scholarship. We propose a fourth, which provides a foundational base for the others: the discourse of fashion pedagogy. We begin with the argument that to thrive in any of these discourses, all fashion graduates require the ability to navigate the complexities of the 21st century fashion industry. Fashion graduates emerge into a professional world which demands a range of high level capabilities above and beyond those traditionally acknowledged by the discipline. Professional education in fashion must transform itself to accommodate these imperatives. In this paper, we document a tale of fashion learning, teaching and scholarship – the tale of a highly successful future-orientated boutique university-based undergraduate fashion course in Queensland, Australia. The Discipline consistently maintains the highest student satisfaction and lowest attrition of any course in the university, achieves extremely competitive student satisfaction scores when compared with other courses nationally and internationally, and reports outstanding graduate employment outcomes. The core of the article addresses how the course effectively balances five key pedagogical tensions identified from the findings of in-depth focus groups with graduating students, and interviews with teaching staff. The pedagogical tensions are: high concept/ authenticity; high disciplinarity/ interdisciplinarity; high rigour/ play; high autonomy/ scaffolding; and high individuality/ community, where community can be further divided into high challenge and high support. We discuss each of these tensions and how they are characterised within the course, using rich descriptions given by the students. We also draw upon the wider andragogical and learning futures literatures to link the tensions with what is already known about excellence in 21st century higher and further education curriculum and pedagogic practice. We ask: as the fashion industry becomes truly globalised, virtualised, and diversified, and as initial professional training for the industry becomes increasingly massified and performatised, what are the best teaching approaches to produce autonomous, professionally capable, enterprising and responsible graduates into the future? Can the pedagogical balances described in this case study be maintained in the light of these powerful external forces, and if so, how?

Identifying competencies for Australian health professionals working in international health

A profile of the roles performed by Australian health professionals working in international health was constructed to identify the core competencies they require, and the implications for education and training of international health practitioners. The methods used included: literature review and document analysis of available training and education; an analysis of competencies required in job descriptions for international health positions; and consultations with key informants. The international health roles identified were classified in four main groups: Program Directors, Program Managers, Team Leaders and Health Specialists. Thirteen 'core' competencies were identified from the job analysis and key informant/group interviews. Contributing to international health development in resource poor countries requires high level cultural, interpersonal and team-work competencies. Technical expertise in health disciplines is required, with flexibility to adapt to new situations. International health professionals need to combine public health competencies with high level personal maturity to respond to emerging challenges.

A waste management system for small and medium enterprises engaged in office building retrofit projects

Waste management and minimisation is considered to be an important issue for achieving sustainability in the construction industry. Retrofit projects generate less waste than demolitions and new builds, but they possess unique features and require waste management approaches that are different to traditional new builds. With the increasing demand for more energy efficient and environmentally sustainable office spaces, the office building retrofit market is growing in capital cities around Australia with a high level of refurbishment needed for existing aging properties. Restricted site space and uncertain delivery process in these projects make it a major challenge to manage waste effectively. The labour-intensive nature of retrofit projects creates the need for the involvement of small and medium enterprises (SMEs) as subcontractors in on-site works. SMEs are familiar with on-site waste generation but are not as actively motivated and engaged in waste management activities as the stakeholders in other construction projects in the industry. SMEs’ responsibilities for waste management in office building retrofit projects need to be identified and adapted to the work delivery processes and the waste management system supported by project stakeholders. The existing literature provides an understanding of how to manage construction waste that is already generated and how to increase the waste recovery rate for office building retrofit projects. However, previous research has not developed theories or practical solutions that can guide project stakeholders to understand the specific waste generation process and effectively plan for and manage waste in ongoing project works. No appropriate method has been established for the potential role and capability of SMEs to manage and minimise waste from their subcontracting works. This research probes into the characteristics of office building retrofit project delivery with the aim to develop specific tools to manage waste and incorporate SMEs in this process in an appropriate and effective way. Based on an extensive literature review, the research firstly developed a questionnaire survey to identify the critical factors of on-site waste generation in office building retrofit projects. Semi-structured interviews were then utilised to validate the critical waste factors and establish the interrelationships between the factors. The interviews served another important function of identifying the current problems of waste management in the industry and the performance of SMEs in this area. Interviewees’ opinions on remedies to the problems were also collected. On the foundation of the findings from the questionnaire survey and semi-structured interviews, two waste planning and management strategies were identified for the dismantling phase and fit-out phase of office building retrofit projects, respectively. Two models were then established to organize SMEs’ waste management activities, including a work process-based integrated waste planning model for the dismantling phase and a system dynamics model for the fit-out phase. In order to apply the models in real practice, procedures were developed to guide SMEs’ work flow in on-site waste planning and management. In addition, a collaboration framework was established for SMEs and other project stakeholders for effective waste planning and management. Furthermore, an organisational engagement strategy was developed to improve SME waste management practices. Three case studies were conducted to validate and finalise the research deliverables. This research extends the current literature that mostly covers waste management plans in new build projects, by presenting the knowledge and understanding of addressing waste problems in retrofit projects. It provides practical tools and guidance for industry practitioners to effectively manage the waste generation processes in office building retrofit projects. It can also promote industry-level recognition of the role of SMEs and their performance in on-site waste management.