Produção de fitase por Rhizopus microsporus var. microsporus: purificação, caracterização bioquímica e aplicação

Pós-graduação em Biotecnologia - IQ

Influence of the addition of chlorhexidine diacetate on bond strength of a high-viscosity glass ionomer cement to sound and artificial caries-affected dentin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de método analítico para estudo de degradação forçada de cefalotina sódica na forma farmacêutica pó liofilizado para solução injetável

Pós-graduação em Ciências Farmacêuticas - FCFAR

Seleção de micro-organismos celulolíticos comparados com o Trichoderma reesei CCT 2768

As celulases atualmente são enzimas extensivamente estudadas para a hidrólise de resíduos lignocelulósicos para obtenção de açúcares fermentescíveis utilizáveis em diferentes processos biotecnológicos, como a produção de bioetanol. O objetivo deste trabalho foi encontrar fungos celulolíticos que sejam eficientes nos processos de degradação da biomassa lignocelulósica. No presente trabalho foram selecionados 4 fungos celulolíticos previamente isolados pelo Laboratório de Biotecnologia Industrial (UNESP – Assis). Estes fungos foram cultivados em bagaço de cana-de-açúcar como substrato e para seus extratos enzimáticos foram testados suas atividades para celulases (FPase) e endoglucanases (CMCase). Os fungos FS09 (0,054 FPU/mL e 1,79 FPU/g de substrato, 0,874 U/mL e 29,1 U/g de substrato) e M51 (0,049 FPU/mL e 1,62 FPU/g de substrato, 1,094 U/mL e 36,46 U/g de substrato), mostrando valores superiores ao fungo T.reesei CCT 2768 que é referência em estudos e produção de celulases.

Efeito da β-amilase e α-amilase fúngica seguido de desramificação na formação e características estruturais de amido resistente tipo 3 de batata e araruta

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo do ultrassom de potência no pré-tratamento do material lignocelulósico de resíduos da bananeira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de bioetanol de segunda geração pelo consórcio Zymomonas mobilis CCT4494 e Candida tropicallis em resíduos de uvas Isabel e Bordô

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Polissacarídeos da biomassa do basidiomiceto Rhizoctonia solani: extração, purificação e atividade biológica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de enzimas celulolíticas pelos fungos Trichoderma reesei e Myceliophthora thermophila e aplicação na sacarificação do bagaço de cana-de-açucar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bioprospecção de leveduras fermentadoras de xilose visando a produção de etanol a partir de bagaço de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de ácidos orgânicos por cepas leveduras assimiladoras de xilose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Production of ginger vinegar

Vinegar is a food of condiments group that have great use in the food industry. This study aimed to evaluate the effects of parameters of the acetic fermentation process in the production of ginger vinegar. A suspension of ginger rhizomes with 12% of starch was subjected to enzymatic hydrolysis process to obtain hydrolyzed with 85.6% of glucose. After the alcoholic fermentation the wine was obtained with 40.3% ethanol. The acetic fermentation process of ginger alcoholic solution followed a completely randomized design in a factorial for three factors at two levels. The independent variables were: temperature, nutrients and proportion of "strong vinegar" and alcoholic solution (initial acidity). Results showed variation from 2.74 to 3.70% for dry extract and 2.13 to 2.83% for ash in vinegars. The profile of organic acids of ginger vinegars showed the presence of acetic, citric, malic and succinic acids in all treatments. The condition of 20 degrees C, initial acidity 1:1, with addition of nutrients allow obtaining good quality vinegars and higher GK yields.

Quantitative measures of lambs fed hydrolyzed sugarcane under aerobic and anaerobic conditions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Chemical composition and in vitro digestibility of fresh sugarcane hydrolysed with calcium oxide (CaO)

The objective was to evaluate the chemical composition and in vitro digestibility of sugarcane hydrolysed with increasing doses of calcium oxide and varying air exposure times. A completely randomised, split plot design was used; the doses were allocated to the plots, and the air exposure times were allocated to the subplots, with four repetitions. The data underwent analysis of variance and were laid out according to the effect of the treatment on the components of polynomial regressions, and evaluated at the 5% probability. The increase in the dosage negatively affected the quantities of neutral-detergent fibre (NDF), acid-detergent fibre (ADF), lignin (LIG), total carbohydrates (TC), cellulose (CEL), crude protein (CP), and ether extract (EE); and positively affected the quantities of non-fibrous carbohydrates (NFC) and mineral matter (MM). The addition of calcium oxide improved the in vitro digestible dry matter (IVDMD) coefficients and was able to keep up to 72 hours. The in vitro digestibility of the neutral-detergent fibre (IVDNDF) and of the acid-detergent fibre (IVDADF) coefficients decreased when calcium oxide was added. Calcium oxide has the ability to hydrolyse the fibrous fraction and conserve chopped sugarcane. Doses of 0.5 and 1.0% lime exhibited similar results to those achieved at higher doses; therefore, higher doses are not required in the hydrolyses of sugarcane. Over time, the sugarcane deteriorates, but this deterioration is reduced by the addition of calcium oxide.

Análise estrutural de aerogéis via espalhamento de luz a baixo ângulo

The sol-gel process is a method for obtaining vitreous or vitro-ceramic materials which, are prepared a sol and by drying the liquid phase. This technique has been used extensively for the preparation of glassy gels, films, fibers and particles from the hydrolysis and polycondensation reactions of metal alkoxides. The usual methods for drying are: evaporation drying (xerogels), freeze drying (criogéis) and via supercritical CO2 extraction (aerogels). In the present work, we studied the preparation of silica gels by the sol-gel process from the hydrolysis of alkoxides tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). The hydrolysis was promoted from GPTS and TEOS in proportion (4: 1) under acidic conditions. The hydrolysis reaction was promoted inside a Becker at room temperature. After hydrolyses the prepared sol had pH 2, and kept under mechanical agitation for a period of 1 hour. In order to accelerate the polycondensation reaction, the pH was corrected to a value near 5 by slowly adding NH4OH. Then the sols were leaked in sealed polycarbonate containers and maintained for 20 days at 40°C for gelation. Silica aerogels were prepared via supercritical CO2 extraction of the wet gel at temperature and pressure higher than 31°C and 74 atm, in an autoclave specially developed for the process. The structural characteristics were studied in the dry gel (aerogel). Aerogels were then characterized by nitrogen adsorption and small angle light scattering. The nitrogen adsorption data were analyzed for the determination of the BET specific surface (SBET), the total pore volume Vp, the pore mean size (lP=4Vp/SBET), the particle mean size (lS) and the pore size distribution (PSD). And the data from small angle light scattering were analyzed to determine the correlation function (γ'), the area per unit volume (S/V), average pore size (l ) and the average particle size...