Red wine sweetness preference according to consumer segmentation

The present work aims to evaluate the acceptance and preference for sweet taste in red wine, according to consumer segmentation in age, gender, personality type, tasting sensitivity and consumer experience in wine. A hundred and fourteen wine tasters were invited to the wine tasting, and the average age was 27 years. An addition of sugar was made with equal concentrations of glucose and fructose to the wine at 2g/L, 4g/L, 8g/L, 16g/L and 32g/L. Five pairs of glasses were presented for the subjects to taste containing each a control wine and a spiked sample. Pairs were presented in order of concentration, from 2g/L to 32g/l. The subjects were also asked to answer two online questionnaires at the end of the tasting, on the personality types and vinotype, which is related to mouth sensitivity. ISO-5495 paired comparison tests were used for sensorial analysis. The objective was to assess if any of the nine segmentation factors had influence on preference or rejection for spiked samples and to establish whether this preference was statistically significant. We concluded that it would be important to have subjects with an age average higher than 27 years and more experienced in wine drinking, mostly because the data relative to preferences in novices shows some dispersion and lack of attention. A panel of older and more experienced wine tasters is likely to be more attentive and focused and therefore yield differentiated results. It was also concluded that more research is required to extend this investigation to other wine styles because the differences in preferences can depend on other reasons, such as preferring a wine with more or less sugar according to the type of wine. Finally it was concluded also that some variables influence preference for sweet taste in red wine, such as gender, vinotype and category of experience

COMPOSITION OF FRESHLY HARVESTED BRAZILIAN ROYAL JELLY - IDENTIFICATION OF CARBOHYDRATES FROM THE SUGAR FRACTION

Samples of Brazilian royal jelly from Africanized Apis mellifera were analysed in order to determine the gross composition: crude moisture ranged from 67.80% to 69.40%, crude protein from 15.80% to 16.70%, crude lipid from 2.90% to 3.98% and-total sugars from 11.40% to 11.50%. The sugar fraction was investigated and revealed the presence of the following compounds identified by their retention time during HPLC analysis: ribose, fructose, glucose, sucrose, mannose, trehalose, erythritol, adonitol and mannitol.

Maltodextrin-incorporated-vacuum-dried honey powder: processing and stability

Honey is rich in sugar content and dominated by fructose and glucose that make honey prone to crystallize during storage. Due to honey composition, the anhydrous glass transition temperature of honey is very low that makes honey difficult to dry alone and drying aid or filler is needed to dry honey. Maltodextrin is a common drying aid material used in drying of sugar-rich food. The present study aims to study the processing of honey powder by vacuum drying method and the impact of drying process and formulation on the stability of honey powder. To achieve the objectives, the series of experiments were done: investigating of maltodextrin DE 10 properties, studying the effect of drying temperature, total solid concentration, DE value, maltodextrin concentration and anti-caking agent on honey powder processing and stability. Maltodextrin provide stable glass compared to lower molecular weight sugars. Dynamic Dew Point Isotherm (DDI) data could be used to determine amorphous content of a system. The area under the first derivative curve from DDI curve is equal to the amount of water needed by amorphous material to crystallize. The drying temperature affected the amorphous content of vacuum-dried honey powder. The higher temperature seemed to result in honey powder with more amorphous component. The ratio of maltodextrin affected more significantly the stability of honey powder compared to the treatments of total solids concentration, DE value and drying temperature. The critical water activity of honey powder was lower than water activity of the equilibrium water content corresponding to BET monolayer water content. Addition of anti-caking agent increased stability and flow-ability of honey powder. Addition of Calcium stearate could inhibit collapse of the honey powder during storage.

Guía de práctica clínica para la enfermedad hepática grasa no alcohólica

Objetivo: Brindar una guía de práctica clínica basada con la evidencia más reciente para el diagnóstico y tratamiento de la Enfermedad Hepática Grasa No alcohólica teniendo en cuenta la efectividad y seguridad de las intervenciones dirigidas a pacientes, personal asistencial, administrativo y entes gubernamentales de cualquier servicio de atención en Colombia. Materiales y métodos: Esta guía fue desarrollada por un equipo multidisciplinario con apoyo de la Asociación Colombiana de Gastroenterología, el Grupo Cochrane ITS y el Instituto de Investigaciones Clínicas de la Universidad Nacional de Colombia. Se desarrollaron preguntas clínicas relevantes y se realizó la búsqueda de guías nacionales e internacionales en bases de datos especializadas. Las guías existentes fueron evaluadas en términos de calidad y aplicabilidad. Una guía cumplió los criterios de adaptación, por lo que se decidió adaptar 3 preguntas clínicas. El Grupo Cochrane realizó la búsqueda sistemática de la literatura. Las tablas de evidencia y recomendaciones fueron realizadas con base a la metodología GRADE. Las recomendaciones de la guía fueron socializadas en una reunión de expertos con entes gubernamentales y pacientes. Resultados: Se desarrolló una guía de práctica clínica basada en la evidencia para el diagnóstico y tratamiento de la Enfermedad Hepática Grasa No alcohólica en Colombia Conclusiones: El diagnóstico y manejo oportuno de la Enfermedad Hepática Grasa No alcohólica contribuirá a disminuir la carga de la enfermedad en Colombia y las enfermedades asociadas

Prevalencia y factores asociados al consumo de bebidas azucaradas en escolares de 9 a 17 años de Bogotá, Colombia: Estudio FUPRECOL

Objetivo: Determinar la prevalencia y los factores asociados al consumo de bebidas azucaradas en una población escolar de Bogotá, Colombia, pertenecientes al estudio FUPRECOL. Métodos: Estudio descriptivo y transversal, realizado en 8136 niños y adolescentes en edad escolar entre 9 y 17 años de Bogotá, Colombia. El peso, la estatura, el índice de masa corporal (IMC), la circunferencia de cintura y el porcentaje de grasa, se recogieron como marcadores antropométricos y de composición corporal. El consumo de bebidas azucaradas (bebidas carbonatadas, jugos ultra-procesados y/o Té), y los factores asociados (sexo, edad, obesidad abdominal, clasificación del IMC, grado de estudios de la madre/padre, y nivel nutricional por cuestionario “Krece plus”), se recogieron por encuesta estructurada. Se establecieron asociaciones mediante la construcción de modelos de regresión logística simple. Resultados: De la población general, el 58,4% eran mujeres. En función al sexo, los varones acusaron la mayor ingesta de “bebidas carbonatadas” con una frecuencia semanal y diaria de 70,9% y 21,0%, respectivamente, seguido de “jugos ultra- procesados” (64,4% semanal vs. 11,3% diario). En ambos sexos, la prevalencia de obesidad abdominal fue mayor en los escolares que respondieron consumir diariamente “bebidas carbonatadas” (23,3%), “jugos ultra-procesados” (13,2%) y “bebidas Té” (9,7%). La edad, el grado de educación de los padres y el nivel nutricional, se asociaron como factores predisponentes al consumo diario de “bebidas carbonatadas”. Conclusión: El consumo de bebidas azucaradas cambia por los factores analizados. Se recomiendan intervenciones integrales en las que estén involucrados los componentes nutricional y educativo entre los niños y adolescentes de Bogotá, Colombia.

Diversity of new root nodule bacteria from Erythrina velutina Willd., a native legume from the Caatinga dry forest (Northeastern Brazil).

This study aims to evaluate the phenotypical characteristics of bacterial isolates from mulungu (Erythrina velutina Willd.) nodules and determinate their Box-PCR fingerprinting. All bacteria were evaluated by the following phenotypic characteristics: growth rate, pH change, colony color and mucus production. The bacterial isolates able to re-nodulate the original host were also evaluated regarding its tolerance to increased salinity and different incubation temperatures, ability to growth using different carbon sources, intrinsic antibiotic resistance and ?in vitro? auxin biosynthesis. The molecular fingerprints were set up using the Box-PCR technique and the isolates were clustered by their profiles. Among the 22 bacterial isolates obtained, eight were able to re-nodulate the original host. Among the nodule inducing isolates, some were tolerant to 1% of NaCl and 39° C and all of them metabolized the maltose, fructose, glucose, sucrose and arabinose, were resistant to rifampicin and produced auxin. The bacteria showed low genetic similarity among them and reference strains, which indicates the great genetic variability of the isolates. The results of this work are the first reports about the bacterial isolates able to nodulate this species. A more deep study of these bacteria may reveal the existence of isolates tolerant to environmental stresses and suitable as a future mulungu inoculant.

Open-cell Metallic Foams for the Electrochemical Conversion of Biomass-derived Compounds

The electrochemical conversion is a sustainable way for the production of added-value products, operating in mild conditions, using in-situ generated hydrogen/oxygen by water and avoiding the use of high H2/O2 pressures. The aim of this work is to investigate the electrocatalytic conversion of 5-hydroxymetilfurfural (HMF) and D-glucose, in alkaline media, using metallic open-cell foams based-catalysts. The electrochemical hydrogenation of HMF to 2,5-bis(hydroxymethyl)furan (BHMF) was performed using nanostructured Ag, deposited by galvanic displacement (GD) or electrodeposition (ED), on Cu foam, obtaining AgCu bimetallic nanoparticles (ED) or dendrites (GD) which enhanced electroactive surface area, charge and mass transfer, than bare foams. In diluted 0.02M HMF solutions, Ag/Cu samples selectively produce BHMF; the large surface area enhanced the productivity, compared to their 2D counterparts. Furthermore, at more concentrated solutions (0.05 – 0.10M) a gradually decrease of selectivity is observed. The performances of the electrodes is stable during the catalytic tests but a Cu-enrichment of particles occurred. The performances of Ni foam-based catalysts, obtained by calcination of Ni foam or by electrodeposition of Ni-hydroxide/Ni and Ni particle/Ni, were firstly investigated for the selective electrochemical oxidation of D-glucose toward gluconic acid (GO) and glucaric acid (GA). Then, the calcined catalyst was chosen to study the influence of the reaction conditions on the reaction mechanism. The GO and GA selectivities increase with the charge passed, while the formation of by-products from C-C cleavage/retro-aldol process is maximum at low charge. The fructose obtained from glucose isomerization favours the formation of by-products. The best glucose/NaOH ratio is between 0.5 and 0.1: higher values suppress the OER, while lower values favour the formation of low molecular weight products. The increases of the potential enhance the GO selectivity, nevertheless higher GA selectivity is observed at 0.6 – 0.7V vs SCE, confirmed by catalytic test performed in gluconate (30-35% GA selectivity).

Evaluation of the real nutritional value of processed food to improve their effect on health and increase their sustainability

Cured meats and dairy products are criticized for their salt content and synthetic additives. This has led to the development of strategies to reduce and replace these ingredients. Since the food matrix and technological processes can affect the bioaccessibility of nutrients, it is necessary to study their release during digestion to determine the real nutritional value of foods. In the first part of this PhD project, the impact on the nutritional quality of the reduction of sodium content and of the replacement of synthetic nitrates/nitrites with a combination of innovative formulations was evaluated in Parmigiano Reggiano Cheese and salami. For this purpose, an in vitro digestion model combined with different analytical techniques was used. The results showed that fatty acids and proteins release increased over time during digestion. At the end of digestion, the innovative formulation/processing did not negatively affect fatty acids release and protein hydrolysis, and led to the formation of bioactive peptides. The excessive intake of sugars is correlated with metabolic diseases. After the intestinal uptake, their release in the blood stream depends on their metabolic fate within the enterocyte. In the second part of this PhD project, the absorption and metabolism of glucose, fructose and sucrose was evaluated using intestinal cell line. A faster absorption of fructose than glucose was observed, and a different modulation of the synthesis/transport of other metabolites by monosaccharides was shown. Intestinal cells were also used to verify the stability and intestinal uptake of vitamins (A and D3) delivered to cells through two vehicles. It was shown that the presence of lipids protected the vitamin from external factors such as light, heat and oxygen, and improved their bioavailability Overall, the results obtained in this PhD project confirmed that considering only the chemical composition of foods is not sufficient to determine their nutritional value.

Development of processes for the valorization of lignocellulosic biomass based on renewable energies

The world grapples with climate change from fossil fuel reliance, prompting Europe to pivot to renewable energy. Among renewables, biomass is a bioenergy and bio-carbon source, used to create high-value biomolecules, replacing fossil-based products. Alkyl levulinates, derived from biomass, hold promise as bio-additives and biofuels, especially via acid solvolysis of hexose sugars, necessitating further exploration. Alkyl levulinate's potential extends to converting into γ-valerolactone (GVL), a bio-solvent produced via hydrogenation with molecular-hydrogen. Hydrogen, a key reagent and energy carrier, aids renewable energy integration. This thesis delves into a biorefinery system study, aligning with sustainability goals, integrating biomass valorization, energy production, and hydrogen generation. It investigates optimizing technologies for butyl levulinate production and subsequent GVL hydrogenation. Sustainability remains pivotal, reflecting the global shift towards renewable and carbon bio-resources. The research initially focuses on experimenting with the optimal technology for producing butyl levulinate from biomass-derived hexose fructose. It examines the solvolysis process, investigating optimal conditions, kinetic modeling, and the impact of solvents on fructose conversion. The subsequent part concentrates on the technological aspect of hydrogenating butyl levulinate into GVL. It includes conceptual design, simulation, and optimization of the fructose-to-GVL process scheme based on process intensification. In the final part, the study applies the process to a real case study in Normandy, France, adapting it to local biomass availability and wind energy. It defines a methodology for designing and integrating the energy-supply system, evaluating different scenarios. Sustainability assessment using economic, environmental, and social indicators culminates in an overall sustainability index, indicating scenarios integrating the GVL biorefinery system with wind power and hydrogen energy storage as promising due to high profitability and reduced environmental impact. Sensitivity analyses validate the methodology's reliability, potentially extending to other technological systems.