Efeitos ambientais e genéticos sobre escores visuais e ganho em peso ao sobreano de bovinos brangus

This research aimed at studying the effects of age of the cow at calving (IVP), age of the animal at yearling (IDS), the direct additive genetic (AD) and maternal (AM) effects and individual heterozygosity (HI) on visual scores of conformation (CS), early finishing (PS) and muscling (MS) at postweaning and average daily gain from weaning to yearling (GDS) of cattle used to originate the Brangus breed. There were analyzed records on 24 531, 21 166, 24 006 and 25 419 for CS, PS, MS and GDS, respectively, of animals born from 1986 to 2002 belonging to livestock files of Gensys Consultores Associados S/C Ltda. The analyses were performed by the least square method using mathematical models that included contemporary group as class variable and IVP, IDS, AD, AM and HI as covariates. IVP showed linear and quadratic effects (p<0.01) on GDS and linear (p<0.01) on PS, while the quadratic effect of IDS was not significant for PS and GDS. AD and AM were significant (p<0.01) only for PS and MS scores, respectively. All the traits were significantly (p<0.01) influenced by HI. The environmental and genetic effects were important sources of variation for the studied traits and should be taken into account when comparison of animals and selection were performed.

Application of MLP and Kohonen networks for recognition of wear patterns of single-point dressers

Grinding is a parts finishing process for advanced products and surfaces. However, continuous friction between the workpiece and the grinding wheel causes the latter to lose its sharpness, thus impairing the grinding results. This is when the dressing process is required, which consists of sharpening the worn grains of the grinding wheel. The dressing conditions strongly affect the performance of the grinding operation; hence, monitoring them throughout the process can increase its efficiency. The objective of this study was to estimate the wear of a single-point dresser using intelligent systems whose inputs were obtained by the digital processing of acoustic emission signals. Two intelligent systems, the multilayer perceptron and the Kohonen neural network, were compared in terms of their classifying ability. The harmonic content of the acoustic emission signal was found to be influenced by the condition of dresser, and when used to feed the neural networks it is possible to classify the condition of the tool under study.

Parâmetros genéticos de características de carcaça e de crescimento de bovinos da raça Nelore

The objectives of this study were to estimate genetic parameters involving yearling weight (Ps), carcass weight (Pc), hip height (Ag) and the scores of conformation (C), precocity (P) and musculature (M) and carcass yield (Rd) and finishing score (Ac) in Nellore cattle in order to define criteria for selection in this breed. The data of the 20 732 animals were obtained from Agrope-cuária Jacarezinho, SP. Data were analyzed by restricted maximum likelihood using animal model multi-trait analysis, which included fixed effects of contemporary groups (animals born at the same month and slaughtered on the same day) and the covariate age at slaughter (linear) for carcass traits, and contemporary groups (animals of the same farm, age, sex and management group at weaning and yearling) and yearling age (linear) for growth and as random, the additive effects and residual effects. Estimates ranged from 0.13 (Ac and Rd) to 0.36 (Ag) for heritability and from -0.59 ± 0.62 (Rd with Ac) to 0.71 ± 0.17 (Pc with C) for genetic correlations. Selection for Pc, C, P, M, Ag or Ps may be efficient because their heritability estimates are of magnitude moderate. Selection for Ps and C can favor heavier Pc, considering their positive and high genetic correlation.

The use of elevation map histograms for topographic heterogeneity analysis

Surface defects are extremely important in mechanical characterization of several different materials. Therefore, the analysis of surface finishing is essential for a further simulation of surface mechanical properties in a customized project in materials science and technology. One of the methods commonly employed for such purpose is the statistical mapping of different sample surface regions using the depth from focus technique. The analysis is usually performed directly from the elevation maps which are obtained from the digital image processing. In this paper, the possibility of quantifying the surface heterogeneity of Silicon Carbide porous ceramics by elevation map histograms is presented. The advantage of this technique is that it allows the qualitative or quantitative verification of all surface image fields that cannot be done by using the Surface Plot plugin of image J™ platform commonly used in digital image processing. © 2012 Springer Science+Business Media, LLC.

Intermittent use of an anchor system improves postural control in healthy older adults

Haptic information, provided by a non-rigid tool (i.e., an anchor system), can reduce body sway in individuals who perform a standing postural task. However, it was not known whether or not continuous use of the anchor system would improve postural control after its removal. Additionally, it was unclear as to whether or not frequency of use of the anchor system is related to improved control in older adults. The present study evaluated the effect of the prolonged use of the anchor system on postural control in healthy older individuals, at different frequencies of use, while they performed a postural control task (semi-tandem position). Participants were divided into three groups according to the frequency of the anchor system's use (0%, 50%, and 100%). Pre-practice phase (without anchor) was followed by a practice phase (they used the anchor system at the predefined frequency), and a post-practice phase (immediate and late-without anchor). All three groups showed a persistent effect 15. min after the end of the practice phase (immediate post-practice phase). However, only the 50% group showed a persistent effect in the late post-practice phase (24. h after finishing the practice phase). Older adults can improve their postural control by practicing the standing postural task, and use of the anchor system limited to half of their practice time can provide additional improvement in their postural control. © 2013 Elsevier B.V.

Stress susceptibility in pigs supplemented with ractopamine

Ractopamine is a β-adrenergic agonist used as an energy repartitioning agent in the diets of finishing pigs. Most ractopamine studies are limited to evaluations of growth performance and meat quality, and there is little information on the effects of this additive on the behavior and welfare of pigs. Therefore, the objective of this study was to evaluate various indicators of stress caused by feeding diets containing ractopamine. One hundred seventy barrows and 170 gilts weighing 107.3 kg were allocated to 30 pens with 10 to 12 barrows or gilts per pen. Pigs were offered 1 of the 3 dietary treatments (0, 5, or 10 mg ractopamine/kg) for 28 d with 5 barrow pens and 5 gilt pens per treatment. Pigs were evaluated for behavior 3 d per week 1 wk before the initiation of the experiment and throughout the experiment. Each pig was classified into 1 of the 13 activities (drinking water, lying alone, lying in clusters, standing, nosing pig, sitting, feeding, biting pig, walking, exploring, running away, playing, and mounting pen mates) and also grouped into 1 of the 3 categories (calm, moving, and feeding themselves) based on those activities. At the end of the experiment, 3 pigs from each pen were slaughtered, and blood samples were collected during exsanguination to determine physiological indicators of stress (cortisol, lactate, and creatine-kinase enzymes). The incidence of skin and carcass lesions was determined at shoulder, loin, and ham. Ractopamine had no effect (P > 0.05) on pig behavior, total number of skin and carcass lesions, or blood concentrations of cortisol or lactate. However, there was an increase (P < 0.05) of creatine kinase concentrations in pigs receiving ractopaminesupplemented feed. This finding is consistent with the concept that ractopamine may cause muscular disorders, and this warrants further investigation. © 2013 American Society of Animal Science. All rights reserved.

Neural networks models for wear patterns recognition of single-point dresser

Grinding is a workpiece finishing process for advanced products and surfaces. However, the constant friction between workpiece and grinding wheel causes the latter to lose its sharpness, thereby impairing the result of the grinding process. When this occurs, the dressing process is essential to sharpen the worn grains of the grinding wheel. The dressing conditions strongly influence the performance of the grinding operation; hence, monitoring them throughout the process can increase its efficiency. The purpose of this study was to classify the wear condition of a single-point dresser using intelligent systems whose inputs were obtained by digitally processing acoustic emission signals. Two multilayer perceptron (MLP) neural networks were compared for their classification ability, one using the root mean square (RMS) statistics and another the ratio of power (ROP) statistics as input. In this study, it was found that the harmonic content of the acoustic emission signal is influenced by the condition of the dresser, and that the condition of the tool under study can be classified by using the aforementioned statistics to feed a neural network. © IFAC.

Carcass characteristics of feedlot lambs fed crude glycerin contaminated with high concentrations of crude fat

Thirty non-castrated male lambs with 20. ±. 2.3. kg average body weight (BW) were randomly assigned to five treatments consisted of different dietary concentrations of crude glycerin (CG; 0, 3, 6, 9 and 12% on DM basis) to evaluate the effects on performance, carcass and meat quality traits. A quadratic effect was observed for performance (P= 0.04), final BW (P<. 0.01) and hot carcass weight (P<. 0.01). No effects of CG were observed (P>. 0.05) on carcass pH neither on shear-force, cooking loss and ether extract content in longissimus. The inclusion of CG tended to reduce the Zn content in meat (P= 0.09). The data suggests that CG (36.2% of glycerol and 46.5% of crude fat) may be used in diets of finishing lambs with concentrations up to 3% without negative effects on performance and main carcass traits. Moreover, inclusion of CG seems to not affect quality and safety of meat for human consumption. © 2013 Elsevier Ltd.

A cerâmica do povo Paiter Suruí de Rondônia: continuidade e mudança cultural, 1970-2010

Pós-graduação em Artes - IA

Lógica ANFIS aplicada na estimação da rugosidade e do desgaste da ferramenta de corte no processo de retificação plana de cerâmicas avançadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Classificação de níveis de desgaste de dressadores de ponta única utilizando sinais de emissão acústica e redes neurais artificiais

Pós-graduação em Engenharia Elétrica - FEB

Curva de crescimento e exportação de nutrientes e sódio por frutos de mangueira Palmer, Haden e Tommy Atkins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Métodos de castração associados à adição de ractopamina em dieta suína e seus efeitos no processamento e qualidade de salame tipo italiano

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Roteiros e produção de conteúdos interativos para celulares nos cursos de educação a distância na televisão digital interativa

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Ambiente controlado e não controlado no desempenho, comportamento e características de carcaça de suínos

Pós-graduação em Zootecnia - FCAV