Iowa Crop Progress & Condition, May 15, 2016

Report produced by the The Department of Agriculture and Land Stewardship, Climatology Bureau. Weather report released by the USDA National Agricultural Statistical Service. The report is released weekly from April through October. Formally titled: Iowa Crop and Weather Report

Iowa Crop Progress & Condition, May 23, 2016

Report produced by the The Department of Agriculture and Land Stewardship, Climatology Bureau. Weather report released by the USDA National Agricultural Statistical Service. The report is released weekly from April through October. Formally titled: Iowa Crop and Weather Report

On the Condition Monitoring of Induction machines

The research of condition monitoring of electric motors has been wide for several decades. The research and development at universities and in industry has provided means for the predictive condition monitoring. Many different devices and systems are developed and are widely used in industry, transportation and in civil engineering. In addition, many methods are developed and reported in scientific arenas in order to improve existing methods for the automatic analysis of faults. The methods, however, are not widely used as a part of condition monitoring systems. The main reasons are, firstly, that many methods are presented in scientific papers but their performance in different conditions is not evaluated, secondly, the methods include parameters that are so case specific that the implementation of a systemusing such methods would be far from straightforward. In this thesis, some of these methods are evaluated theoretically and tested with simulations and with a drive in a laboratory. A new automatic analysis method for the bearing fault detection is introduced. In the first part of this work the generation of the bearing fault originating signal is explained and its influence into the stator current is concerned with qualitative and quantitative estimation. The verification of the feasibility of the stator current measurement as a bearing fault indicatoris experimentally tested with the running 15 kW induction motor. The second part of this work concentrates on the bearing fault analysis using the vibration measurement signal. The performance of the micromachined silicon accelerometer chip in conjunction with the envelope spectrum analysis of the cyclic bearing faultis experimentally tested. Furthermore, different methods for the creation of feature extractors for the bearing fault classification are researched and an automatic fault classifier using multivariate statistical discrimination and fuzzy logic is introduced. It is often important that the on-line condition monitoring system is integrated with the industrial communications infrastructure. Two types of a sensor solutions are tested in the thesis: the first one is a sensor withcalculation capacity for example for the production of the envelope spectra; the other one can collect the measurement data in memory and another device can read the data via field bus. The data communications requirements highly depend onthe type of the sensor solution selected. If the data is already analysed in the sensor the data communications are needed only for the results but in the other case, all measurement data need to be transferred. The complexity of the classification method can be great if the data is analysed at the management level computer, but if the analysis is made in sensor itself, the analyses must be simple due to the restricted calculation and memory capacity.

Control hardware and Condition Monitoring System for Intersector Weld/Cut Robot

Työ sisältää ohjaislaitteiston vertailun ja valinnan rinnakkaisrakenteista robottia varten sekä kunnonvalvontajärjestelmän periaatteiden laadinnan kyseistä robottia varten. Ohjauslaitteisto sisältää teollisuustietokoneen sekä kenttäväylän. Sekä tietokoneesta että väylästä on teoriaosuus ja yksityiskohtaisempi valintaosuus. Teoriaosuudessa selitetään tarkemmin laitteiden toimintaperiaatteista. Valintaosuudessa kerrotaanmiksi jokin tietty laite on valittu käytettäväksi robotin ohjauksessa. Kunnonvalvontateoria ja rinnakkaisrakenteisen robotin kunnonvalvonnan keinot ovat työn toinen osa. Teoriaosa sisältää yleisluonteisen selvityksen vikaantumisesta ja valvonnasta. Erikoisrobotin kunnonvalvonnan keinot esitetään työssä tietyssä järjestyksessä. Ensin esitetään mahdolliset vikatilanteet. Toisessa kohdassa havainnollistetaan vikojen havaitseminen.

Design of a Condition Monitoring System for a Glass Wool Production Line

Työn tarkoituksena oli suunnitella kunnonvalvontajärjestelmä kahdelle lasivillan tuotantolinjalle. Suunnitteluprosessin lisäksi työssä on esitelty erilaisia kunnonvalvontamenetelmiä. Työn alussa on kerrottu erilaisista kunnonvalvontamenetelmistä, joilla voidaan seurata erilaisten laitteiden ja koneiden toimintakuntoa.Erityisesti työssä on tarkasteltu teollisuudessa yleistyviä kunnonvalvonnan värähtelymittauksia. Työssä suunniteltu kunnonvalvontajärjestelmä perustuu viiteen eri menetelmään, jotka ovat värähtelymittaus, lämpötilanmittaus lämpökameralla, lämpötilanmittaus kannettavalla mittarilla, kuuntelu elektronisella stetoskoopilla ja pyörivien osien kunnontarkkailu stroboskoopilla. Kunnonvalvontajärjestelmän suunnittelu on tehty useassa eri vaiheessa. Ensin työssä on kartoitettu tuotannon kannalta tärkeimmät laitteet ja niiden mahdolliset vikaantumistavat. Seuraavaksi on valittu sopivat kunnonvalvontamenetelmät ja tehty mittaussuunnitelma, jossa on esitetty eri laitteille suoritettavat mittaukset ja mittausten aikavälit.Lopuksi työssä on esitelty muutama esimerkkitapaus kunnonvalvontamenetelmien käytöstä sekä kerrottu mahdollisista tulevaisuuden kehitysmahdollisuuksista.

Independent sources of condition dependency and multiple pathways determine a composite trait: lessons from carotenoid-based plumage colouration.

Many colour ornaments are composite traits consisting of at least four components, which themselves may be more complex, determined by independent evolutionary pathways, and potentially being under different environmental control. To date, little evidence exists that several different components of colour elaboration are condition dependent and no direct evidence exists that different ornamental components are affected by different sources of variation. For example, in carotenoid-based plumage colouration, one of the best-known condition-dependent ornaments, colour elaboration stems from both condition-dependent pigment concentration and structural components. Some environmental flexibility of these components has been suggested, but specifically which and how they are affected remains unknown. Here, we tested whether multiple colour components may be condition dependent, by using a comprehensive 3 × 2 experimental design, in which we carotenoid supplemented and immune challenged great tit nestlings (Parus major) and quantified effects on different components of colouration. Plumage colouration was affected by an interaction between carotenoid availability and immune challenge. Path analyses showed that carotenoid supplementation increased plumage saturation via feather carotenoid concentration and via mechanisms unrelated to carotenoid deposition, while immune challenge affected feather length, but not carotenoid concentration. Thus, independent condition-dependent pathways, affected by different sources of variation, determine colour elaboration. This provides opportunities for the evolution of multiple signals within components of ornamental traits. This finding indicates that the selective forces shaping the evolution of different components of a composite trait and the trait's signal content may be more complex than believed so far, and that holistic approaches are required for drawing comprehensive evolutionary conclusions.

Applicability of Power-Line Communications to Data Transfer of On-line Condition Monitoring of Electrical Drives

The research of power-line communications has been concentrated on home automation, broadband indoor communications and broadband data transfer in a low voltage distribution network between home andtransformer station. There has not been carried out much research work that is focused on the high frequency characteristics of industrial low voltage distribution networks. The industrial low voltage distribution network may be utilised as a communication channel to data transfer required by the on-line condition monitoring of electric motors. The advantage of using power-line data transfer is that it does not require the installing of new cables. In the first part of this work, the characteristics of industrial low voltage distribution network components and the pilot distribution network are measured and modelled with respect topower-line communications frequencies up to 30 MHz. The distributed inductances, capacitances and attenuation of MCMK type low voltage power cables are measured in the frequency band 100 kHz - 30 MHz and an attenuation formula for the cables is formed based on the measurements. The input impedances of electric motors (15-250 kW) are measured using several signal couplings and measurement based input impedance model for electric motor with a slotted stator is formed. The model is designed for the frequency band 10 kHz - 30 MHz. Next, the effect of DC (direct current) voltage link inverter on power line data transfer is briefly analysed. Finally, a pilot distribution network is formed and signal attenuation in communication channels in the pilot environment is measured. The results are compared with the simulations that are carried out utilising the developed models and measured parameters for cables and motors. In the second part of this work, a narrowband power-line data transfer system is developed for the data transfer ofon-line condition monitoring of electric motors. It is developed using standardintegrated circuits. The system is tested in the pilot environment and the applicability of the system for the data transfer required by the on-line condition monitoring of electric motors is analysed.

La percusión corporal como estímulo para alumnos con déficit de atención y concentración

El objetivo de este estudio es desarrollar un protocolo de actividades a través del Método BAPNE con alumnos con dificultades de aprendizaje para la estimulación de la atención, concentración y memoria. Con ello queremos demostrar los beneficios que posee la percusión corporal a través de esta metodología y su relación con la creatividad y aprendizaje por proyectos. Con actividades muy específicas elaboradas por un grupo de investigación organizado por neurólogos y docentes ofrecemos nuevas vías de innovación docente para aplicar a diferentes colectivos educativos. El estudio se articula bajo unos objetivos centrados en la mejora de la capacidad de abstracción, percepción, atención, observación, concentración y aprendizaje. De forma paralela realizamos especial énfasis en la estimulación de la memoria sensorial (a través de los sentidos), memoria a cortoplazo (inmediata y de trabajo) y en la memoria a largo plazo (episódica, semántica y procedimental). La batería de actividades sugeridas se combina para trabajar asociaciones, secuencias, actividades sensomotrices, repeticiones y descripciones corporales, combinaciones motoras a nivel biomecánico, capacidad de atención y de observación, lenguaje, relajaciones, visualizaciones y percepciones espacio - temporales. Así , sugerimos un modo de trabajo lo más holístico posible para ayudar a personas con problemas de atención y memoria.

Procesos Quirúrgicos que afectan a la imagen corporal

En la actualidad, los estereotipos de belleza impuestos en la sociedad han despertado un interés generalizado por la imagen corporal. Se espera de nosotros que tengamos un aspecto agradable acorde con los estándares estéticos. Esta presión social está potenciada por los medios de comunicación que se encargan de difundir el ideal de belleza en las sociedades contemporáneas. El rechazo social hacia la imagen corporal o la insatisfacción con la percepción del propio cuerpo pueden conducir a una baja autoestima, estigmatización social o problemas psicológicos. Las consecuencias de la sobrevaloración de la imagen corporal se extienden con la aparición de determinadas patologías o la necesidad de aplicación de determinados procedimientos que afectan a la apariencia física del individuo. Existen algunos procesos quirúrgicos que pueden implicar importantes modificaciones en la imagen corporal. Concretamente, las lesiones por quemaduras, las ostomías y las amputaciones suponen un impacto importante para la persona y pueden afectar de forma considerable en su bienestar psicosocial y en la calidad de vida. Producen grandes repercusiones en todas las dimensiones de la persona generando una gran angustia en ella debido a las dudas sobre cómo se verá afectada su vida diaria, surgiendo sentimientos de tristeza, depresión, cambios de humor o negación al cambio. Es importante que los profesionales sanitarios sean conscientes de las diferentes repercusiones que algunas intervenciones quirúrgicas pueden desencadenar en el paciente para poder desarrollar intervenciones adecuadas. Por este motivo, el presente trabajo pretende analizar las consecuencias derivadas de determinados procesos quirúrgicos y su relación con la imagen corporal.

Study of the effect of oral health on physical condition of professional soccer players of the Football Club Barcelona

Objectives: The objective of this study was to evaluate the oral health status of professional soccer players of F.C. Barcelona and its relation to the incidence of sport lesions. Methods: Thirty professional soccer players were consecutively evaluated in the seasons 2003/4, 2004/5 and 2005/6. A research protocol to assess their oral health was developed. DMFT, Quigley & Hein plaque index (PI), Löe & Silness gingival index (GI), World Health Organization malocclusion index, Ramfjord teeth probing pocket depth (PPD), TMJ examination and history of dental trauma were recorded. All physical injuries sustained by players during the season were documented from F.C. Barcelona medical services. Results: Mean DMFT score was 5.7 (SD 4.1), Quigley & Hein plaque index score was 2.3 (SD 1.1), Löe & Silness gingival index was 1.1 (SD 0.8), and periodontal pocket depth was 1.9 mm (SD 0.3). Pearson"s analysis showed a significant correlation between PI and GI (p<0.01). Nine players (30%) presented bruxism - the same proportion of those with severe malocclusion. Seven (23.3%) players had suffered uncomplicated crown fractures. The mean incidence of physical injuries was 8 (SD 3.4) per player. PI and PPD showed a statistically significant correlation to muscle injuries (p<0.05). Conclusions: Soccer players, despite intensive medical follow-up, have significant oral health problems such as untreated caries, gingivitis or malocclusion, and suffer dental trauma as a result of sports activities. Their physical condition could also be associated to oral health