Kalman Filtering in Online Paper Quality Assessment

Controlling the quality variables (such as basis weight, moisture etc.) is a vital part of making top quality paper or board. In this thesis, an advanced data assimilation tool is applied to the quality control system (QCS) of a paper or board machine. The functionality of the QCS is based on quality observations that are measured with a traversing scanner making a zigzag path. The basic idea is the following: The measured quality variable has to be separated into its machine direction (MD) and cross direction (CD) variations due to the fact that the QCS works separately in MD and CD. Traditionally this is done simply by assuming one scan of the zigzag path to be the CD profile and its mean value to be one point of the MD trend. In this thesis, a more advanced method is introduced. The fundamental idea is to use the signals’ frequency components to represent the variation in both CD and MD. To be able to get to the frequency domain, the Fourier transform is utilized. The frequency domain, that is, the Fourier components are then used as a state vector in a Kalman filter. The Kalman filter is a widely used data assimilation tool to combine noisy observations with a model. The observations here refer to the quality measurements and the model to the Fourier frequency components. By implementing the two dimensional Fourier transform into the Kalman filter, we get an advanced tool for the separation of CD and MD components in total variation or, to be more general, for data assimilation. A piece of a paper roll is analyzed and this tool is applied to model the dataset. As a result, it is clear that the Kalman filter algorithm is able to reconstruct the main features of the dataset from a zigzag path. Although the results are made with a very short sample of paper roll, it seems that this method has great potential to be used later on as a part of the quality control system.

High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites

Though there has been a great deal of work concerning the development of natural fibers in reinforced starch-based composites, there is still more to be done. In general, cellulose fibers have lower strength than glass fibers; however, their specific strength is not far from that of fiberglass. In this work, alpha-fibers were obtained from alpha-grass through a mild cooking process. The fibers were used to reinforce a starch-based biopolymer. Composites including 5 to 35% (w/w) alpha-grass fibers in their formulation were prepared, tested, and subsequently compared with those of wood- and fiberglass-reinforced polypropylene (PP). The term “high-performance” refers to the tensile strength of the studied composites and is mainly due to a good interphase, a good dispersion of the fibers inside the matrix, and a good aspect ratio. The tensile strength of the composites showed a linear evolution for fiber contents up to 35% (w/w). The strain at break of the composites decreased with the fiber content and showed the stiffening effects of the reinforcement. The prepared composites showed high mechanical properties, even approaching those of glass fiber reinforced composites

Web-based corporate social responsibility reporting

Due to concerns regarding globalisation and sustainable development, corporate social responsibility (CSR) is topical in the business context and in the field of accounting. The main objective of this study was to review previous academic literature in the field of CSR reporting and develop an insight into CSR reporting in the Web-based environment. The main purpose was to find out what Web-based CSR reporting is like and how companies are utilising the Internet to communicate on responsibility issues. I did not, however, collect empirical research data but limited my study into theoretical and descriptive examination. In order to create an insight into Web-based reporting, I examined the development, motives and current practices of CSR reporting. I concluded that the Internet is a unique, interactive communication channel that is used differently compared with annual reports. The amount of companies engaging in Web-based CSR reporting is increasing and the reporting practices in terms of e.g. content and accessibility of information vary. I also concluded that many companies have not yet discovered the true potential of the Web as an interactive communication medium.

Improved Privacy-Preserving P2P Multimedia Distribution Based on Recombined Fingerprints

Peer-reviewed

Secure and Anonymous Multimedia Content Distribution in Peer-to-Peer Networks

Peer-reviewed

Active du/dt Filtering for Variable-Speed AC Drives

An oscillating overvoltage has become a common phenomenon at the motor terminal in inverter-fed variable-speed drives. The problem has emerged since modern insulated gate bipolar transistors have become the standard choice as the power switch component in lowvoltage frequency converter drives. Theovervoltage phenomenon is a consequence of the pulse shape of inverter output voltage and impedance mismatches between the inverter, motor cable, and motor. The overvoltages are harmful to the electric motor, and may cause, for instance, insulation failure in the motor. Several methods have been developed to mitigate the problem. However, most of them are based on filtering with lossy passive components, the drawbacks of which are typically their cost and size. In this doctoral dissertation, application of a new active du/dt filtering method based on a low-loss LC circuit and active control to eliminate the motor overvoltages is discussed. The main benefits of the method are the controllability of the output voltage du/dt within certain limits, considerably smaller inductances in the filter circuit resulting in a smaller physical component size, and excellent filtering performance when compared with typical traditional du/dt filtering solutions. Moreover, no additional components are required, since the active control of the filter circuit takes place in the process of the upper-level PWM modulation using the same power switches as the inverter output stage. Further, the active du/dt method will benefit from the development of semiconductor power switch modules, as new technologies and materials emerge, because the method requires additional switching in the output stage of the inverter and generation of narrow voltage pulses. Since additional switching is required in the output stage, additional losses are generated in the inverter as a result of the application of the method. Considerations on the application of the active du/dt filtering method in electric drives are presented together with experimental data in order to verify the potential of the method.

Selective and non-extractive spectrophotometric determination of cefdinir in formulations based on donor-acceptor complex formation

Cefdinir has broad spectrum of activity and high prescription rates, hence its counterfeiting seems imminent. We have proposed a simple, fast, selective and non-extractive spectrophotometric method for the content assay of cefdinir in formulations. The method is based on complexation of cefdinir and Fe under reducing condition in a buffered medium (pH 11) to form a magenta colored donor-acceptor complex (λ max = 550 nm; apparent molar absorptivity = 3720 L mol-1 cm-1). No other cephalosporins, penicillins and common excipients interfere under the test conditions. The Beer's law is followed in the concentration range 8-160 µg mL-1.

Application of ftir in the determination of acrylate content in poly(sodium acrylate-co-acrylamide) superabsorbent hydrogels

Hydrogels have been prepared by free-radical solution copolymerization of acrylamide and sodium acrylate (NaAc), with molar ratio ranging from 25/75 to 80/20, respectively, using methylene bisacrylamide as the crosslinking agent. A FTIR spectroscopy procedure to determine the acrylate/acrylamide ratio in these hydrogels was proposed based on absorbance at 1410 cm-1 (nCOO-) and 2940 cm-1 (nCH and nCH2). A straight line with a good linear correlation coefficient (0.998) was obtained by plotting the acrylate content (Ac%) versus relative absorbance (Arel = A1410/A2940). Results were confirmed by the amount of sodium cation released in acid medium determined by atomic absorption spectrometry.

Validation of an hplc method for the determination of 1,7-dihydroxy-2,3-methylenedioxyxanthone in extracts obtained from Polygala cyparissias A. St. Hil. & Moq. (Polygalaceae) and evaluation of the influence of its content on the gastroprotective activity

Polygala cyparissias is a plant widespread in Southern Latin America. Recently, we demonstrated the gastroprotective activity of the extract, as well as for one of the isolated metabolites-1,7-dihydroxy-2,3-methylenedioxyxanthone (MDX). In this study, a HPLC method for the quantification of MDX was validated. The HPLC method was linear (0.5-24 µg mL-1 of MDX) with good accuracy, precision and robustness. The content of MDX in the extracts from whole and different parts of the plant ranged from 0 to 5.4 mg g-1 and the gastroprotective index ranged from 72.1 to 99.1%. Thus, the method might be used for the standardization of the extracts based on the MDX marker.

A NOVEL METHOD FOR THE DETERMINATION OF TRACE THORIUM BY DISPERSIVE LIQUID-LIQUID MICROEXTRACTION BASED ON SOLIDIFICATION OF FLOATING ORGANIC DROP

In this study, dispersive liquid-liquid microextraction based on the solidification of floating organic droplets was used for the preconcentration and determination of thorium in the water samples. In this method, acetone and 1-undecanol were used as disperser and extraction solvents, respectively, and the ligand 1-(2-thenoyl)-3,3,3-trifluoracetone reagent (TTA) and Aliquat 336 was used as a chelating agent and an ion-paring reagent, for the extraction of thorium, respectively. Inductively coupled plasma-optical emission spectrometry was applied for the quantitation of the analyte after preconcentration. The effect of various factors, such as the extraction and disperser solvent, sample pH, concentration of TTA and concentration of aliquat336 were investigated. Under the optimum conditions, the calibration graph was linear within the thorium content range of 1.0-250 µg L-1 with a detection limit of 0.2 µg L-1. The method was also successfully applied for the determination of thorium in the different water samples.

Pathogenicity, molecular characterization, and cercosporin content of Brazilian isolates of Cercospora kikuchii

Cercospora kikuchii, involved with the defoliation of soybean (Glycine max) plants, is normally associated with Septoria glycines in late season. Seventy-two isolates from different regions in Brazil, obtained mainly from purple stained seeds, showed phenotypic variation. Cercosporin content and rate of colony growth was higly variable among isolates. A strong correlation between cercosporin content and virulence was identified. Genetic variation among and within populations was evaluated based on 86 RAPD loci. The RAPD analysis clustered all isolates into seven groups. No relationship was observed between RAPD groups and geographic origin or cercosporin content. The sequence of the internal spacer regions (ITS1-5.8S-ITS2) from 13 isolates chosen according to the previous RAPD and clustering analysis showed high similarity (97%-100%) to the GenBank sequences of C. kikuchii (AY266160, AY266161, AY152577 and AF291708). It is clear from this work that Brazilian isolates of C. kikuchii from different geographic regions, are variable in relation to virulence, RAPD profiles and cercosporin content. Cercosporin content could be a good parameter for choosing an adequate isolate for screening resistant or tolerant cultivars. Considering that this pathogen is easily seed-borne, findings are expected to show the same haplotypes in different regions. Migration could be favoured by infected seeds as demonstrated by RAPD analysis.

Phase voltage control and filtering in a converter-fed single-phase customer-end system of the LVDC distribution network

In recent years, the network vulnerability to natural hazards has been noticed. Moreover, operating on the limits of the network transmission capabilities have resulted in major outages during the past decade. One of the reasons for operating on these limits is that the network has become outdated. Therefore, new technical solutions are studied that could provide more reliable and more energy efficient power distributionand also a better profitability for the network owner. It is the development and price of power electronics that have made the DC distribution an attractive alternative again. In this doctoral thesis, one type of a low-voltage DC distribution system is investigated. Morespecifically, it is studied which current technological solutions, used at the customer-end, could provide better power quality for the customer when compared with the current system. To study the effect of a DC network on the customer-end power quality, a bipolar DC network model is derived. The model can also be used to identify the supply parameters when the V/kW ratio is approximately known. Although the model provides knowledge of the average behavior, it is shown that the instantaneous DC voltage ripple should be limited. The guidelines to choose an appropriate capacitance value for the capacitor located at the input DC terminals of the customer-end are given. Also the structure of the customer-end is considered. A comparison between the most common solutions is made based on their cost, energy efficiency, and reliability. In the comparison, special attention is paid to the passive filtering solutions since the filter is considered a crucial element when the lifetime expenses are determined. It is found out that the filter topology most commonly used today, namely the LC filter, does not provide economical advantage over the hybrid filter structure. Finally, some of the typical control system solutions are introduced and their shortcomings are presented. As a solution to the customer-end voltage regulation problem, an observer-based control scheme is proposed. It is shown how different control system structures affect the performance. The performance meeting the requirements is achieved by using only one output measurement, when operating in a rigid network. Similar performance can be achieved in a weak grid by DC voltage measurement. An additional improvement can be achieved when an adaptive gain scheduling-based control is introduced. As a conclusion, the final power quality is determined by a sum of various factors, and the thesis provides the guidelines for designing the system that improves the power quality experienced by the customer.

Identifying first graders at risk of reading and writing difficulties : creating a group-based screening tool in kiswahili in Tanzania

Early identification of beginning readers at risk of developing reading and writing difficulties plays an important role in the prevention and provision of appropriate intervention. In Tanzania, as in other countries, there are children in schools who are at risk of developing reading and writing difficulties. Many of these children complete school without being identified and without proper and relevant support. The main language in Tanzania is Kiswahili, a transparent language. Contextually relevant, reliable and valid instruments of identification are needed in Tanzanian schools. This study aimed at the construction and validation of a group-based screening instrument in the Kiswahili language for identifying beginning readers at risk of reading and writing difficulties. In studying the function of the test there was special interest in analyzing the explanatory power of certain contextual factors related to the home and school. Halfway through grade one, 337 children from four purposively selected primary schools in Morogoro municipality were screened with a group test consisting of 7 subscales measuring phonological awareness, word and letter knowledge and spelling. A questionnaire about background factors and the home and school environments related to literacy was also used. The schools were chosen based on performance status (i.e. high, good, average and low performing schools) in order to include variation. For validation, 64 children were chosen from the original sample to take an individual test measuring nonsense word reading, word reading, actual text reading, one-minute reading and writing. School marks from grade one and a follow-up test half way through grade two were also used for validation. The correlations between the results from the group test and the three measures used for validation were very high (.83-.95). Content validity of the group test was established by using items drawn from authorized text books for reading in grade one. Construct validity was analyzed through item analysis and principal component analysis. The difficulty level of most items in both the group test and the follow-up test was good. The items also discriminated well. Principal component analysis revealed one powerful latent dimension (initial literacy factor), accounting for 93% of the variance. This implies that it could be possible to use any set of the subtests of the group test for screening and prediction. The K-Means cluster analysis revealed four clusters: at-risk children, strugglers, readers and good readers. The main concern in this study was with the groups of at-risk children (24%) and strugglers (22%), who need the most assistance. The predictive validity of the group test was analyzed by correlating the measures from the two school years and by cross tabulating grade one and grade two clusters. All the correlations were positive and very high, and 94% of the at-risk children in grade two were already identified in the group test in grade one. The explanatory power of some of the home and school factors was very strong. The number of books at home accounted for 38% of the variance in reading and writing ability measured by the group test. Parents´ reading ability and the support children received at home for schoolwork were also influential factors. Among the studied school factors school attendance had the strongest explanatory power, accounting for 21% of the variance in reading and writing ability. Having been in nursery school was also of importance. Based on the findings in the study a short version of the group test was created. It is suggested for use in the screening processes in grade one aiming at identifying children at risk of reading and writing difficulties in the Tanzanian context. Suggestions for further research as well as for actions for improving the literacy skills of Tanzanian children are presented.

Cognitively Empowering Internet-Based Patient Education for Ambulatory Orthopaedic Surgery Patients

Tiedollista voimavaraistumista tukeva internet-perustainen ohjaus päiväkirurgisille ortopedisille potilaille Tutkimuksen tarkoituksena oli kehittää tiedollista voimavaraistumista tukeva Internetperustainen potilasohjausohjelma sekä arvioida sitä. Tutkimusprosessi jaettiin kahteen vaiheeseen. Ensimmäisessä vaiheessa luotiin sisältö tiedollista voimavaraistumista tukevalle Internet-perustaiselle ohjaukselle päiväkirurgisia ortopedisia potilaita varten. Toisessa vaiheessa arvioitiin Internet-perustaisen ohjauksen (koeryhmä) hyväksyttävyyttä käyttäjien arvioimana ja ohjauksen tuloksia sekä verrattiin Internet-perustaisen ohjauksen (koeryhmä) tuloksia tiedollisesti voimavaraistumista tukevan sairaanhoitajan välittämään ohjauksen (kontrolliryhmä) tuloksiin. Tutkimuksen tavoitteena oli luoda uusi potilasohjausmuoto joka tarjoaa yksilöllisen, osallistavan ja aikaan ja paikkaan sitomattoman ohjauksen päiväkirurgiseen ortopediseen leikkaukseen tulevalle potilaalle. Tutkimuksen ensimmäisessä vaiheessa käytettiin kuvailevaa ja vertailevaa tutkimusmenetelmää (ennen ja jälkeen testaus). Tutkimukseen osallistui 120 päiväkirurgista ortopedista potilasta joiden tiedon odotuksia ja heille välitettyä tietoa tarkasteltiin. Tutkimuksen ensimmäisen vaiheen tuloksien ja aikaisemman voimavaraistumista käsittävän tiedon perusteella luotiin sisältö tiedollista voimavaraistumista tukevalle Internet-perustaiselle ohjaukselle. Sisältö rakentui voimavaraistavan tiedon kuudesta eri osa-alueesta. Tutkimuksen toisessa vaiheessa käytettiin randomoitua kokeellista tutkimusasetelmaa. Päiväkirurgiseen ortopediseen leikkaukseen tulevat potilaat randomoitiin koeryhmään (n=72) Internetperustaiseen ohjaukseen ja kontrolliryhmään (n=75) sairaanhoitajan välittämään ohjaukseen. Aineisto kerättiin strukturoitujen mittareiden avulla ja tulokset analysoitiin tilastollisesti. Tutkimuksen tulokset osoittavat, että kehitettyä tiedollisesti voimavaraistumista tukevaa Internet-perustaista potilasohjausmenetelmää voidaan suositella käytettäväksi ortopedisten päiväkirurgisten potilaiden ohjauksessa ja potilailla on hyvät mahdollisuudet voimavaraistua tiedollisesti sen avulla. Monipuolista tietoa sisältävä Internet-perustainen ohjaus osoittautui käyttäjien näkökulmasta hyväksyttäväksi. Vaikka Internet ohjauksen hyväksyttävyys koettiin osittain heikommaksi kuin sairaanhoitajan välittämän ohjauksen, potilaat käyttivät nettisivustoa ongelmitta ja arvioivat sen helppokäyttöiseksi. Ohjausmuodolla ei ollut vaikutusta hoidosta aiheutuneisiin kustannuksiin. Sen sijaan kustannuksista organisaatiolle voitiin puolittaa sairaanhoitajan ohjaukseen käyttämä aika Internet-perustaisen ohjauksen avulla. Internet-perustaiseen ohjaukseen osallistuneiden potilaiden tiedon taso ja kokemus tiedon riittävyydestä lisääntyivät ohjauksen jälkeen enemmän kuin sairaanhoitajan välittämään potilasohjaukseen osallistuneiden potilaiden tiedot. Ohjausmuodolla ei ollut vaikutusta potilaiden kokemien tunteiden ja oireiden voimakkuuteen. Yhteenvetona voidaan todeta, että tiedollisesti voimavaraistava Internet-perustaista ohjausta voidaan suositella vaihtoehtoiseksi menetelmäksi sairaanhoitajan välittämälle ohjaukselle päiväkirurgiseen ortopediseen leikkaukseen tuleville potilaille.

Luminescence-based assay methods in drug discovery

The drug discovery process is facing new challenges in the evaluation process of the lead compounds as the number of new compounds synthesized is increasing. The potentiality of test compounds is most frequently assayed through the binding of the test compound to the target molecule or receptor, or measuring functional secondary effects caused by the test compound in the target model cells, tissues or organism. Modern homogeneous high-throughput-screening (HTS) assays for purified estrogen receptors (ER) utilize various luminescence based detection methods. Fluorescence polarization (FP) is a standard method for ER ligand binding assay. It was used to demonstrate the performance of two-photon excitation of fluorescence (TPFE) vs. the conventional one-photon excitation method. As result, the TPFE method showed improved dynamics and was found to be comparable with the conventional method. It also held potential for efficient miniaturization. Other luminescence based ER assays utilize energy transfer from a long-lifetime luminescent label e.g. lanthanide chelates (Eu, Tb) to a prompt luminescent label, the signal being read in a time-resolved mode. As an alternative to this method, a new single-label (Eu) time-resolved detection method was developed, based on the quenching of the label by a soluble quencher molecule when displaced from the receptor to the solution phase by an unlabeled competing ligand. The new method was paralleled with the standard FP method. It was shown to yield comparable results with the FP method and found to hold a significantly higher signal-tobackground ratio than FP. Cell-based functional assays for determining the extent of cell surface adhesion molecule (CAM) expression combined with microscopy analysis of the target molecules would provide improved information content, compared to an expression level assay alone. In this work, immune response was simulated by exposing endothelial cells to cytokine stimulation and the resulting increase in the level of adhesion molecule expression was analyzed on fixed cells by means of immunocytochemistry utilizing specific long-lifetime luminophore labeled antibodies against chosen adhesion molecules. Results showed that the method was capable of use in amulti-parametric assay for protein expression levels of several CAMs simultaneously, combined with analysis of the cellular localization of the chosen adhesion molecules through time-resolved luminescence microscopy inspection.