Patient hand hygiene compliance in the hemodialysis environment

Hand hygiene compliance of patients receiving hemodialysis treatment is a contemporary discussion topic among health care professionals in the Nephrology Clinic of Helsinki University City Hospital. The purpose of the Final Thesis is to review patient hand hygiene in terms of risks its lack entails and based on the evidence based findings to design an end product as a poster. The poster can be utilised in the Nephrology Clinic's nursing environment to educate and motivate patients to pay specifid attention to the importance of hand hygiene. The method used was a systematic literature review. The most important evidence based findings were extracted from the chosen thirteen scientific articles. All articles were searched from the Cumulative Index to Nursing and Allied Health Literature electronic database. The gathered information was then used to build the content of a patient education tool that for this project was defined as a Poster. The findings in this study showed that transmission of bloodborne infections, like Hepatitis B or C virus can occur through a vascular access and that the consequences of this can be very fatal. Additionally, environmental surfaces such as furniture, door knobs and dialysis machine control knobs were all possible infection sources for the patient receiving hemodialysis treatment. Adherence to good hand hygiene behaviour lowered the risk for infections. The end product of this study is a poster that is targeted to patients undergoing hemodialysis treatment. Using a health promotion agenda in the Poster, it is hoped that patients will pay more attention to the importance of hand hygiene and that they will be more motivated to use aseptic methods such as alcohol based hand rubs in the hemodialysis setting.

Teaching, sustainability and environment in UPC buildings

Universities must motivate future professionals so that they are able to apply their experience over and beyond the scientific and technological context. These professionals should also be trained so that they are aware of the current position as regards the economy and limited energy resources, and they must be creative, knowledgeable and committed if they are to rethink the current model.The Departments of Architectural Technology II and Applied Physics, in collaboration with the Interdisciplinary Centre of Technology, Innovation and Education for Sustainability (CITIES), believed that students could be given the opportunity to specialise in the area of sustainable development by means of their final theses [2]. With this objective in mind, a line of theses called Energy Assessments was created as part of the Plan for Resource Consumption Efficiency (PECR). The line was based on a learning strategy that focused on the student.The teaching staff was able to observe that, in terms of cognitive aspects, the students improved their knowledge of environmental issues and the associated skills, and that they were more able to solve problems in the area of sustainability and had greater concerns about this subject matter after having completed their theses.

6.2

Airborne particles can come from a variety of sources and contain variable chemical constituents. Some particles are formed by natural processes, such as volcanoes, erosion, sea spray, and forest fires, while other are formed by anthropogenic processes, such as industrial- and motor vehicle-related combustion, road-related wear, and mining. In general, larger particles (those greater than 2.5 μm) are formed by mechanical processes, while those less than 2.5 μm are formed by combustion processes. The chemical composition of particles is highly influenced by the source: for combustion-related particles, factors such as temperature of combustion, fuel type, and presence of oxygen or other gases can also have a large impact on PM composition. These differences can often be observed at a regional level, such as the greater sulphate-composition of PM in regions that burn coal for electricity production (which contains sulphur) versus regions that do not. Most countries maintain air monitoring networks, and studies based on the resulting data are the most common basis for epidemiology studies on the health effects of PM. Data from these monitoring stations can be used to evaluate the relationship between community-level exposure to ambient particles and health outcomes (i.e., morbidity or mortality from various causes). Respiratory and cardiovascular outcomes are the most commonly assessed, although studies have also considered other related specific outcomes such as diabetes and congenital heart disease. The data on particle characteristics is usually not very detailed and most often includes some combination of PM2.5, PM10, sulphate, and NO2. Other descriptors that are less commonly found include particle number (ultrafine particles), metal components of PM, local traffic intensity, and EC/OC. Measures of association are usually reported per 10 μg/m3 or interquartile range increase in pollutant concentration. As the exposure data are taken from regional monitoring stations, the measurements are not representative of an individual's exposure. Particle size is an important descriptor for understanding where in the human respiratory system the particles will deposit: as a general rule, smaller particles penetrate to deeper regions of the lungs. Initial studies on the health effects of particulate matter focused on mass of the particles, including either all particles (often termed total suspended particulate or TSP) or PM10 (all particles with an aerodynamic diameter less than 10 μm). More recently, studies have considered both PM10 and PM2.5, with the latter corresponding more directly to combustion-related processes. UFPs are a dominant source of particles in terms of PNC, yet are negligible in terms of mass. Very few epidemiology studies have measured the effect of UFPs on health; however, the numbers of studies on this topic are increasing. In addition to size, chemical composition is of importance when understanding the toxicity of particles. Some studies consider the composition of particles in addition to mass; however this is not common, in part due the cost and labour involved in such analyses.

Local adaptation and life history traits evolution in heterogeneous environment : an empirical example in the freshwater snail, Galba truncatula

Abstract: To understand the processes of evolution, biologists are interested in the ability of a population to respond to natural or artificial selection. The amount of genetic variation is often viewed as the main factor allowing a species to answer to selection. Many theories have thus focused on the maintenance of genetic variability. Ecologists and population geneticists have long-suspected that the structure of the environment is connected to the maintenance of diversity. Theorists have shown that diversity can be permanently and stably maintained in temporal and spatial varying environment in certain conditions. Moreover, varying environments have been also theoretically demonstrated to cause the evolution of divergent life history strategies in the different niches constituting the environment. Although there is a huge number of theoretical studies selection and on life history evolution in heterogeneous environments, there is a clear lack of empirical studies. The purpose of this thesis was to. empirically study the evolutionary consequences of a heterogeneous environment in a freshwater snail Galba truncatula. Indeed, G. truncatula lives in two habitat types according the water availability. First, it can be found in streams or ponds which never completely dry out: a permanent habitat. Second, G. truncatula can be found in pools that freeze during winter and dry during summer: a temporary habitat. Using a common garden approach, we empirically demonstrated local adaptation of G. truncatula to temporary and permanent habitats. We used at first a comparison of molecular (FST) vs. quantitative (QST) genetic differentiation between temporary and permanent habitats. To confirm the pattern QST> FST between habitats suggesting local adaptation, we then tested the desiccation resistance of individuals from temporary and permanent habitats. This study confirmed that drought resistance seemed to be the main factor selected between habitats, and life history traits linked to the desiccation resistance were thus found divergent between habitats. However, despite this evidence of selection acting on mean values of traits between habitats, drift was suggested to be the main factor responsible of variation in variances-covariances between populations. At last, we found life history traits variation of individuals in a heterogeneous environment varying in parasite prevalence. This thesis empirically demonstrated the importance of heterogeneous environments in local adaptation and life history evolution and suggested that more experimental studies are needed to investigate this topic. Résumé: Les biologistes se sont depuis toujours intéressés en l'aptitude d'une population à répondre à la sélection naturelle. Cette réponse dépend de la quantité de variabilité génétique présente dans cette population. Plus particulièrement, les théoriciens se sont penchés sur la question du maintient de la variabilité génétique au sein d'environnements hétérogènes. Ils ont alors démontré que, sous certaines conditions, la diversité génétique peut se maintenir de manière stable et permanente dans des environnements variant au niveau spatial et temporel. De plus, ces environments variables ont été démontrés comme responsable de divergence de traits d'histoire de vie au sein des différentes niches constituant l'environnement. Cependant, malgré ce nombre important d'études théoriques portant sur la sélection et l'évolution des traits d'histoire de vie en environnement hétérogène, les études empiriques sont plus rares. Le but de cette thèse était donc d'étudier les conséquences évolutives d'un environnement hétérogène chez un esgarcot d'eau douce Galba truncatula. En effet, G. truncatula est trouvé dans deux types d'habitats qui diffèrent par leur niveau d'eau. Le premier, l'habitat temporaire, est constitué de flaques d'eau qui peuvent s'assécher pendant l'été et geler pendant l'hiver. Le second, l'habitat permanent, correspond à des marres ou à des ruisseaux qui ont un niveau d'eau constant durant toute l'année. Utilisant une approche expérimentale de type "jardin commun", nous avons démontré l'adaptation locale des individus à leur type d'habitat, permanent ou temporaire. Nous avons utilisé l'approche Fsr/QsT qui compare la différentiation génétique moléculaire avec la différentiation génétique quantitative entre les 2 habitats. Le phénomène d'adapation locale démontré par QsT > FsT, a été testé experimentalement en mesurant la résistance à la dessiccation d'individus d'habitat temporaire et permanent. Cette étude confirma que la résistance à la sécheresse a été sélectionné entre habitats et que les traits responsables de cette resistance sont différents entre habitats. Cependant si la sélection agit sur la valeur moyenne des traits entre habitats, la dérive génétique semble être le responsable majeur de la différence de variances-covariances entre populations. Pour finir, une variation de traits d'histoire de vie a été trouvée au sein d'un environnement hétérogène constitué de populations variants au niveau de leur taux de parasitisme. Pour conclure, cette thèse a donc démontré l'importance d'un environnement hétérogène sur l'adaptation locale et l'évolution des traits d'histoire de vie et suggère que plus d'études empiriques sur le sujet sont nécessaires.

Product costing in SAP environment

Kustannuslaskennan ala on muuttumassa. IT teknologian hämmästyttävän nopea kehitys viime vuosina on luonut kustannuslaskennalle uusia mahdollisuuksia. Toisaalta myös kustannuslaskennalle asetetut vaatimukset ovat muuttuneet. Nykyisin kustannustietoutta tarvitaan erityisesti päätöksenteon tueksi. Kaikesta huolimatta yleisesti käytetyt laskentamenetelmät eivät ole muuttuneet. Työn tavoite on tutkia mahdollisia tapoja tuotekohtaisen kustannuslaskennan toteuttamiseksi SAP toiminnanohjausjärjestelmän avulla. Erityisesti toiminnanohjausjärjestelmien nopea kehitys on mahdollistanut aikaisempaa nopeamman ja tarkemman kustannuslaskennan. On kuitenkin muistettava, että järjestelmät ovat vaintyökaluja. On siis erittäin tärkeää valita tarkoituksenmukainen laskentamenetelmä. Työn perimmäinen tarkoitus onkin valita kyseessä olevaan tilanteeseen sopivin menetelmä.Viime vuosien akateemisessa kirjoittelussa on esitelty useita uusia kustannuslaskentamenetelmiä. Toimintolaskennan uusi versio, Time-Driven Activity-Based Costing, on eräs varteenotettava vaihtoehto tuotekohtaisen kustannuslaskennan toteuttamiseksi SAP-ympäristössä. Toinen hyvin soveltuva menetelmä on Resource Consumption Accounting (RCA), joka soveltuu erityisen hyvin SAP-ympäristöön.Molemmilla menetelmillä on hyvät ja huonot puolet, mutta tässä tapauksessa RCA soveltuu tehtävään paremmin. RCA on joustava ja tarjoaa laaja-alaista tietoa. Tästä syystä Resource Consumption Accounting oli paras vaihtoehto.Työssä rakennettu RCA malli testattiin kolmen erilaisen tuotteen historiallisella datalla. RCA:ntuomia mahdollisuuksia pohdittiin ja ongelmia selvitettiin. RCA on hyvin saman tyyppinen yrityksessä jo käytettävän laskentamenetelmän kanssa. Implementointi ei siis olisi mahdoton tehtävä. RCA kuitenkin tarjoaa mahdollisuuksia, joita nykyisellä menetelmällä ei voida saavuttaa.

Accounting system for activity standard costs formulation in ERP environment

Toiminnanohjausjärjestelmän implementointi ja sen mukanaan tuomat muutokset tuotekustannuslaskentaan asettavat haasteita yritykselle. Metallitoimialalla toimivassa yrityksessä on havaittu samat haasteet implementoitaessa SAP R/3 toiminnanohjausjärjestelmää ja sen tuotekustannuslaskentatoiminnallisuutta. SAP R/3 tuotekustannuslogiikka tarvitsee tietoa järjestelmän ulkopuolelta, minkä huomioimatta jättäminen vaikuttaa suoraan laskentatarkkuuteen. Diplomityössä kehitetään sekä standardoitu prosessi että laskentajärjestelmä, joiden avulla pystytään laskemaan tarvittavat niin toimintokustannukset eri teräspalvelukeskuksen kuormituspisteille kuin kustannustenvyörytysarvot. Lasketut arvot muodostavat tarvittavat tekijät SAP R/3 tuotekustannuslaskennan master dataan. Tavoitteena on edesauttaa läpinäkyvän kustannustiedon muodostumista. Diplomityö pohjautuu ns. vesiputousmalliin (SDLC). Ensin tunnistetaan reunaehdot ympäristöstä, jossa tuotekustannuslaskenta toteutetaan. Tämä asettaa joustamattomia komponentteja kehitettävälle laskentajärjestelmälle. Joustavat komponentit sen sijaan antavat vapautta laskentajärjestelmälle. Yhdistämällä joustamattomat ja joustavat komponentit saavutetaan järjestelmä, jolla voidaan täydentää SAP R/3 tuotekustannuslaskennan puutteellisuutta.

Pollination requirements of seeded and seedless mini watermelon varieties cultivated under protected environment

The objective of this work was to evaluate the floral biology and pollination requirements of seeded and seedless mini watermelon varieties, and to determine the best varieties to cultivate under protected environment. Three seedless (HA-5106, HA-5158, and HA-5161) and two seeded (Minipol and Polimore) genotypes were tested. Flowers were monitored from the pre-anthesis stage to senescence, and fruit quality was also evaluated. The evaluated treatments were hand-geitonogamous pollination (MG), cross-pollination with pollen from the Polimore variety (MCP), cross-pollination with pollen from the Minipol variety (MCM), and restricted pollination. All varieties had monoecious plants with diclinous flowers, and the stigmas remained receptive throughout anthesis. Fruit set rates of 84.62% (MG), 61.54% (MCP), 48% (MCM), and 0% (restricted) were obtained for seeded varieties, but of 0% (MG), 76.36% (MCP), 82.69% (MCM), and 0% (restricted) for seedless varieties. Fruits did not differ in quality among treatments within each genotype. Therefore, all the studied varieties require a pollination agent and diploid pollen for fruit set to occur, regardless of the donor variety; and Minipol or Polimore with HA-5106 or HA-5158 are the varieties recommended for cultivation in protected environment.

Correlations between vocal input and visual response apparently enhance presence in a virtual environment

This work investigates novel alternative means of interaction in a virtual environment (VE).We analyze whether humans can remap established body functions to learn to interact with digital information in an environment that is cross-sensory by nature and uses vocal utterances in order to influence (abstract) virtual objects. We thus establish a correlation among learning, control of the interface, and the perceived sense of presence in the VE. The application enables intuitive interaction by mapping actions (the prosodic aspects of the human voice) to a certain response (i.e., visualization). A series of single-user and multiuser studies shows that users can gain control of the intuitive interface and learn to adapt to new and previously unseen tasks in VEs. Despite the abstract nature of the presented environment, presence scores were generally very high.

Proxemics with multiple dynamic characters in an immersive virtual environment

An experiment was carried out to examine the impact on electrodermal activity of people when approached by groups of one or four virtual characters at varying distances. It was premised on the basis of proxemics theory that the closer the approach of the virtual characters to the participant, the greater the level of physiological arousal. Physiological arousal was measured by the number of skin conductance responses within a short time period after the approach, and the maximum change in skin conductance level 5 s after the approach. The virtual characters were each either female or a cylinder of human size, and one or four characters approached each subject a total of 12 times. Twelve male subjects were recruited for the experiment. The results suggest that the number of skin conductance responses after the approach and the change in skin conductance level increased the closer the virtual characters approached toward the participants. Moreover, these response variables were inversely correlated with the number of visits, showing a typical adaptation effect. There was some evidence to suggest that the number of characters who simultaneously approached (one or four) was positively associated with the responses. Surprisingly there was no evidence of a difference in response between the humanoid characters and cylinders on the basis of this physiological data. It is suggested that the similarity in this quantitative arousal response to virtual characters and virtual objects might mask a profound difference in qualitative response, an interpretation supported by questionnaire and interview results. Overall the experiment supported the premise that people exhibit heightened physiological arousal the closer they are approached by virtual characters.

Modeling competencies and capabilities in knowledge intensive business environment

Tämän diplomityön päämääränä oli tutkia Perloksen teknologiaosaamisia. Perloksen tavoitteena on tulevaisuudessa yhdistää ja soveltaa uusia teknologioita ja älykkäitä materiaaleja muovimekaniikkaan.Ideana oli mallintaa Perloksen osaamisia ja osaamisgapeja ottaen huomioon heidän tulevaisuuden visionsa. Projektituotteena osaamisten mallintamisessa oli Perlos Healthcaren asiakkaan analysoiva mittauslaite. Tutkimuksen arvo on huomattava sillä tunnistamalla osaamisensa ja kyvykkyytensä yritys pystyy luomaan paremman tarjooman vastatessaan koko ajan kasvaviin asiakasvaatimuksiin. Tutkimus on osa TEKESin rahoittamaa LIIMA -projektia. Työn ensimmäisessä osassa esitellään osaamiseen ja partneroitumiseen liittyviä teorioita. Osaamisten mallintaminen tehtiin Excel -pohjaisella työkalulla. Se sisältää projektituotteeseen liittyen osaamisriippuvuuksien mallintamisen ja gap -analyysin. Yhtenä tutkimusmetodina käytettiin haastattelututkimusta. Työ ja sen tulokset antavat operatiivista hyötyä teknologioiden ja markkinoiden välisessä kentässä.

Integrating testcase generator into Eclipse environment

Tämädiplomityö tutkii kuinka Eclipse -ympäristöä voidaan käyttää testitapausten generoinnissa. Eräs diplomityön pääaiheista on tutkia voidaanko olemassa olevilla Eclipsen komponenteilla parantaa symboolitietoutta, jotta testitapausten generointiin saataisiin lisää tietoa. Aluksi diplomityö antaa lyhyen katsauksen ohjelmistojentestaukseen, jotta lukija ymmärtää mitä ohjelmistotekniikan osa-aluetta diplomityö käsittelee. Tämän jälkeen kerrotaan lisää tietoa itse testitapausten generointiprosessista. Kun perusteet on käsitelty, tutustetaan lukija Eclipse -ympäristöön, mikä se on, mistä se koostuu ja mitä sillä voidaan tehdä. Tarkempaa tietoa kerrotaan Eclipsen komponenteista joita voidaan käyttää apuna testitapausten generoinnissa. Integrointi esimerkkinä diplomityössä esitellään valmiin testitapausgeneraattorin integrointi Eclipse -ympäristöön. Lopuksi Eclipse -pohjaista ratkaisua verrataan symboolitietouden sekä ajoajan kannalta aikaisempaan ratkaisuun. Diplomityön tuloksena syntyi prototyyppi jonka avulla todistettiin, että Eclipse - ympäristöön on mahdollista integroida testitapausgeneraattori ja että se voi lisätä symboolitietoutta. Tämätietouden lisäys kuitenkin lisäsi myös tarvittavaa ajoaikaa, joissakintapauksissa jopa merkittävästi. Samalla todettiin, että tällä hetkellä on menossa projekteja joiden tarkoituksena on parantaa käytettyjen Eclipse komponenttien suorituskykyä ja että tämä voi parantaa tuloksia tulevaisuudessa.

A programming environment having three levels of complexity for mobile robotics = Entorno de programación con tres niveles de complejidad para robótica móvil

This paper presents a programming environment for supporting learning in STEM, particularly mobile robotic learning. It was designed to maintain progressive learning for people with and without previous knowledge of programming and/or robotics. The environment was multi platform and built with open source tools. Perception, mobility, communication, navigation and collaborative behaviour functionalities can be programmed for different mobile robots. A learner is able to programme robots using different programming languages and editor interfaces: graphic programming interface (basic level), XML-based meta language (intermediate level) or ANSI C language (advanced level). The environment supports programme translation transparently into different languages for learners or explicitly on learners’ demand. Learners can access proposed challenges and learning interfaces by examples. The environment was designed to allow characteristics such as extensibility, adaptive interfaces, persistence and low software/hardware coupling. Functionality tests were performed to prove programming environment specifications. UV BOT mobile robots were used in these tests

Averting inflammation by targeting the cytokine environment.

Cytokines are key instigators and regulators of immune responses and therefore hold great potential as targets for new therapeutic strategies. However, the selection of which cytokines to target, and in particular the identification of which cytokines regulate the rate-limiting steps of disease pathways, is crucial to the success of such strategies. Moreover, balancing the need for ablating pathological inflammatory responses and simultaneously maintaining the ability to control infectious agents is a key consideration. Recent advances in our understanding of cytokine networks, as well as technical progress in blocking cytokines in vivo, are likely to be a source for new drugs that can control chronic inflammatory diseases.

XML-based information management environment for PE technologies

Printed electronics is an emerging concept in electronics manufacturing and it is in very early development stage. The technology is not stable, design kits are not developed, and flows and Computer Aided Design (CAD) tools are not fixed yet. The European project TDK4PE addresses all this issues and this PFC has been realized on this context. The goal is to develop an XML-based information system for the collection and management of information from the technology and cell libraries developed in TDK4PE. This system will ease the treatment of that information for a later generation of specific Design Kits (DK) and the corresponding documentation. This work proposes a web application to generate technology files and design kits in a formatted way; it also proposes a structure for them and a database implementation for storing the needed information. The application will allow its users to redefine the structure of those files, as well as export and import XML files, between other formats.