Materials selection for a set of multiple parts considering manufacturing costs and weight reduction with structural isoperformance using direct multisearch optimization

Materials selection is a matter of great importance to engineering design and software tools are valuable to inform decisions in the early stages of product development. However, when a set of alternative materials is available for the different parts a product is made of, the question of what optimal material mix to choose for a group of parts is not trivial. The engineer/designer therefore goes about this in a part-by-part procedure. Optimizing each part per se can lead to a global sub-optimal solution from the product point of view. An optimization procedure to deal with products with multiple parts, each with discrete design variables, and able to determine the optimal solution assuming different objectives is therefore needed. To solve this multiobjective optimization problem, a new routine based on Direct MultiSearch (DMS) algorithm is created. Results from the Pareto front can help the designer to align his/hers materials selection for a complete set of materials with product attribute objectives, depending on the relative importance of each objective.

Numerical and Experimental Analysis of Balanced and Unbalanced Adhesive Single-Lap Joints between Aluminium Adherends

The single-lap joint is the most commonly used, although it endures significant bending due to the non-collinear load path, which negatively affects its load bearing capabilities. The use of material or geometric changes is widely documented in the literature to reduce this handicap, acting by reduction of peel and shear peak stresses or alterations of the failure mechanism emerging from local modifications. In this work, the effect of using different thickness adherends on the tensile strength of single-lap joints, bonded with a ductile and brittle adhesive, was numerically and experimentally evaluated. The joints were tested under tension for different combinations of adherend thickness. The effect of the adherends thickness mismatch on the stress distributions was also investigated by Finite Elements (FE), which explained the experimental results and the strength prediction of the joints. The numerical study was made by FE and Cohesive Zone Modelling (CZM), which allowed characterizing the entire fracture process. For this purpose, a FE analysis was performed in ABAQUS® considering geometric non-linearities. In the end, a detailed comparative evaluation of unbalanced joints, commonly used in engineering applications, is presented to give an understanding on how modifications in the bonded structures thickness can influence the joint performance.

System-on-chip field-programmable gate array design for onboard real-time hyperspectral unmixing

Hyperspectral instruments have been incorporated in satellite missions, providing large amounts of data of high spectral resolution of the Earth surface. This data can be used in remote sensing applications that often require a real-time or near-real-time response. To avoid delays between hyperspectral image acquisition and its interpretation, the last usually done on a ground station, onboard systems have emerged to process data, reducing the volume of information to transfer from the satellite to the ground station. For this purpose, compact reconfigurable hardware modules, such as field-programmable gate arrays (FPGAs), are widely used. This paper proposes an FPGA-based architecture for hyperspectral unmixing. This method based on the vertex component analysis (VCA) and it works without a dimensionality reduction preprocessing step. The architecture has been designed for a low-cost Xilinx Zynq board with a Zynq-7020 system-on-chip FPGA-based on the Artix-7 FPGA programmable logic and tested using real hyperspectral data. Experimental results indicate that the proposed implementation can achieve real-time processing, while maintaining the methods accuracy, which indicate the potential of the proposed platform to implement high-performance, low-cost embedded systems, opening perspectives for onboard hyperspectral image processing.

Unmixing hyperspectral data: independent and dependent component analysis

The development of high spatial resolution airborne and spaceborne sensors has improved the capability of ground-based data collection in the fields of agriculture, geography, geology, mineral identification, detection [2, 3], and classification [4–8]. The signal read by the sensor from a given spatial element of resolution and at a given spectral band is a mixing of components originated by the constituent substances, termed endmembers, located at that element of resolution. This chapter addresses hyperspectral unmixing, which is the decomposition of the pixel spectra into a collection of constituent spectra, or spectral signatures, and their corresponding fractional abundances indicating the proportion of each endmember present in the pixel [9, 10]. Depending on the mixing scales at each pixel, the observed mixture is either linear or nonlinear [11, 12]. The linear mixing model holds when the mixing scale is macroscopic [13]. The nonlinear model holds when the mixing scale is microscopic (i.e., intimate mixtures) [14, 15]. The linear model assumes negligible interaction among distinct endmembers [16, 17]. The nonlinear model assumes that incident solar radiation is scattered by the scene through multiple bounces involving several endmembers [18]. Under the linear mixing model and assuming that the number of endmembers and their spectral signatures are known, hyperspectral unmixing is a linear problem, which can be addressed, for example, under the maximum likelihood setup [19], the constrained least-squares approach [20], the spectral signature matching [21], the spectral angle mapper [22], and the subspace projection methods [20, 23, 24]. Orthogonal subspace projection [23] reduces the data dimensionality, suppresses undesired spectral signatures, and detects the presence of a spectral signature of interest. The basic concept is to project each pixel onto a subspace that is orthogonal to the undesired signatures. As shown in Settle [19], the orthogonal subspace projection technique is equivalent to the maximum likelihood estimator. This projection technique was extended by three unconstrained least-squares approaches [24] (signature space orthogonal projection, oblique subspace projection, target signature space orthogonal projection). Other works using maximum a posteriori probability (MAP) framework [25] and projection pursuit [26, 27] have also been applied to hyperspectral data. In most cases the number of endmembers and their signatures are not known. Independent component analysis (ICA) is an unsupervised source separation process that has been applied with success to blind source separation, to feature extraction, and to unsupervised recognition [28, 29]. ICA consists in finding a linear decomposition of observed data yielding statistically independent components. Given that hyperspectral data are, in given circumstances, linear mixtures, ICA comes to mind as a possible tool to unmix this class of data. In fact, the application of ICA to hyperspectral data has been proposed in reference 30, where endmember signatures are treated as sources and the mixing matrix is composed by the abundance fractions, and in references 9, 25, and 31–38, where sources are the abundance fractions of each endmember. In the first approach, we face two problems: (1) The number of samples are limited to the number of channels and (2) the process of pixel selection, playing the role of mixed sources, is not straightforward. In the second approach, ICA is based on the assumption of mutually independent sources, which is not the case of hyperspectral data, since the sum of the abundance fractions is constant, implying dependence among abundances. This dependence compromises ICA applicability to hyperspectral images. In addition, hyperspectral data are immersed in noise, which degrades the ICA performance. IFA [39] was introduced as a method for recovering independent hidden sources from their observed noisy mixtures. IFA implements two steps. First, source densities and noise covariance are estimated from the observed data by maximum likelihood. Second, sources are reconstructed by an optimal nonlinear estimator. Although IFA is a well-suited technique to unmix independent sources under noisy observations, the dependence among abundance fractions in hyperspectral imagery compromises, as in the ICA case, the IFA performance. Considering the linear mixing model, hyperspectral observations are in a simplex whose vertices correspond to the endmembers. Several approaches [40–43] have exploited this geometric feature of hyperspectral mixtures [42]. Minimum volume transform (MVT) algorithm [43] determines the simplex of minimum volume containing the data. The MVT-type approaches are complex from the computational point of view. Usually, these algorithms first find the convex hull defined by the observed data and then fit a minimum volume simplex to it. Aiming at a lower computational complexity, some algorithms such as the vertex component analysis (VCA) [44], the pixel purity index (PPI) [42], and the N-FINDR [45] still find the minimum volume simplex containing the data cloud, but they assume the presence in the data of at least one pure pixel of each endmember. This is a strong requisite that may not hold in some data sets. In any case, these algorithms find the set of most pure pixels in the data. Hyperspectral sensors collects spatial images over many narrow contiguous bands, yielding large amounts of data. For this reason, very often, the processing of hyperspectral data, included unmixing, is preceded by a dimensionality reduction step to reduce computational complexity and to improve the signal-to-noise ratio (SNR). Principal component analysis (PCA) [46], maximum noise fraction (MNF) [47], and singular value decomposition (SVD) [48] are three well-known projection techniques widely used in remote sensing in general and in unmixing in particular. The newly introduced method [49] exploits the structure of hyperspectral mixtures, namely the fact that spectral vectors are nonnegative. The computational complexity associated with these techniques is an obstacle to real-time implementations. To overcome this problem, band selection [50] and non-statistical [51] algorithms have been introduced. This chapter addresses hyperspectral data source dependence and its impact on ICA and IFA performances. The study consider simulated and real data and is based on mutual information minimization. Hyperspectral observations are described by a generative model. This model takes into account the degradation mechanisms normally found in hyperspectral applications—namely, signature variability [52–54], abundance constraints, topography modulation, and system noise. The computation of mutual information is based on fitting mixtures of Gaussians (MOG) to data. The MOG parameters (number of components, means, covariances, and weights) are inferred using the minimum description length (MDL) based algorithm [55]. We study the behavior of the mutual information as a function of the unmixing matrix. The conclusion is that the unmixing matrix minimizing the mutual information might be very far from the true one. Nevertheless, some abundance fractions might be well separated, mainly in the presence of strong signature variability, a large number of endmembers, and high SNR. We end this chapter by sketching a new methodology to blindly unmix hyperspectral data, where abundance fractions are modeled as a mixture of Dirichlet sources. This model enforces positivity and constant sum sources (full additivity) constraints. The mixing matrix is inferred by an expectation-maximization (EM)-type algorithm. This approach is in the vein of references 39 and 56, replacing independent sources represented by MOG with mixture of Dirichlet sources. Compared with the geometric-based approaches, the advantage of this model is that there is no need to have pure pixels in the observations. The chapter is organized as follows. Section 6.2 presents a spectral radiance model and formulates the spectral unmixing as a linear problem accounting for abundance constraints, signature variability, topography modulation, and system noise. Section 6.3 presents a brief resume of ICA and IFA algorithms. Section 6.4 illustrates the performance of IFA and of some well-known ICA algorithms with experimental data. Section 6.5 studies the ICA and IFA limitations in unmixing hyperspectral data. Section 6.6 presents results of ICA based on real data. Section 6.7 describes the new blind unmixing scheme and some illustrative examples. Section 6.8 concludes with some remarks.

Hyperspectral imagery framework for unmixing and dimensionality estimation

In hyperspectral imagery a pixel typically consists mixture of spectral signatures of reference substances, also called endmembers. Linear spectral mixture analysis, or linear unmixing, aims at estimating the number of endmembers, their spectral signatures, and their abundance fractions. This paper proposes a framework for hyperpsectral unmixing. A blind method (SISAL) is used for the estimation of the unknown endmember signature and their abundance fractions. This method solve a non-convex problem by a sequence of augmented Lagrangian optimizations, where the positivity constraints, forcing the spectral vectors to belong to the convex hull of the endmember signatures, are replaced by soft constraints. The proposed framework simultaneously estimates the number of endmembers present in the hyperspectral image by an algorithm based on the minimum description length (MDL) principle. Experimental results on both synthetic and real hyperspectral data demonstrate the effectiveness of the proposed algorithm.

Análise de Desempenho e Recomendação para Soluções IVR

Mestrado em Engenharia Informática, Área de Especialização em Tecnologias do Conhecimento e da Decisão

COMPARISON OF A COMMERCIAL ENZYME IMMUNOASSAY WITH PLAQUE REDUCTION NEUTRALIZATION FOR MATERNAL AND INFANT MEASLES ANTIBODY MEASUREMENT

The most practicable assay for measurement of measles IgG (mIgG) in large numbers of sera is an enzyme immunoassay (EIA). To assess how EIA results would agree with those by the gold standard method of plaque reduction neutralization (PRN) we compared the results from the two methods in 43 pairs of maternal and umbilical cord sera, and sera from the corresponding infants when aged 11 - 14 months. In maternal-cord sera, the differences between mean antibody levels by EIA or PRN were not statistically significant, though in individual sera, differences could be large. However, agreement was less good for infants sera, in which levels of mIgG were very low. The conclusions of a study of transplacental transport of mIgG would not be affected by the use of either technique. When studying waning immunity in infants, PRN should be the method of choice, while results from studies using EIA should be interpreted with caution.

Caracterização do “warpage” e sua variabilidade no processo produtivo de encapsulamento de circuitos integrados

Nos últimos anos a indústria de semicondutores, nomeadamente a produção de memórias, tem sofrido uma grande evolução. A necessidade de baixar custos de produção, assim como de produzir sistemas mais complexos e com maior capacidade, levou à criação da tecnologia WLP (Wafer Level Packaging). Esta tecnologia permite a produção de sistemas mais pequenos, simplificar o fluxo do processo e providenciar uma redução significativa do custo final do produto. A WLP é uma tecnologia de encapsulamento de circuitos integrados quando ainda fazem parte de wafers (bolachas de silício), em contraste com o método tradicional em que os sistemas são individualizados previamente antes de serem encapsulados. Com o desenvolvimento desta tecnologia, surgiu a necessidade de melhor compreender o comportamento mecânico do mold compound (MC - polímero encapsulante) mais especificamente do warpage (empeno) de wafers moldadas. O warpage é uma característica deste produto e deve-se à diferença do coeficiente de expansão térmica entre o silício e o mold compound. Este problema é observável no produto através do arqueamento das wafers moldadas. O warpage de wafers moldadas tem grande impacto na manufatura. Dependendo da quantidade e orientação do warpage, o transporte, manipulação, bem como, a processamento das wafers podem tornar-se complicados ou mesmo impossíveis, o que se traduz numa redução de volume de produção e diminuição da qualidade do produto. Esta dissertação foi desenvolvida na Nanium S.A., empresa portuguesa líder mundial na tecnologia de WLP em wafers de 300mm e aborda a utilização da metodologia Taguchi, no estudo da variabilidade do processo de debond para o produto X. A escolha do processo e produto baseou-se numa análise estatística da variação e do impacto do warpage ao longo doprocesso produtivo. A metodologia Taguchi é uma metodologia de controlo de qualidade e permite uma aproximação sistemática num dado processo, combinando gráficos de controlo, controlo do processo/produto, e desenho do processo para alcançar um processo robusto. Os resultados deste método e a sua correta implementação permitem obter poupanças significativas nos processos com um impacto financeiro significativo. A realização deste projeto permitiu estudar e quantificar o warpage ao longo da linha de produção e minorar o impacto desta característica no processo de debond. Este projecto permitiu ainda a discussão e o alinhamento entre as diferentes áreas de produção no que toca ao controlo e a melhoria de processos. Conseguiu–se demonstrar que o método Taguchi é um método eficiente no que toca ao estudo da variabilidade de um processo e otimização de parâmetros. A sua aplicação ao processo de debond permitiu melhorar ou a fiabilidade do processo em termos de garantia da qualidade do produto, como ao nível do aumento de produção.

Economias de escala em centros hospitalares

RESUMO - Perante o actual contexto de contenção de gastos no sector da saúde e consequente preocupação com a eficiência do sistema, tem‐se assistido a mudanças várias no modelo de gestão e organizacional do sistema de saúde. Destaca‐se a alteração da estrutura hospitalar, com vista à racionalização dos seus recursos internos, onde as fusões hospitalares têm assumido um papel determinante. Em Portugal, nos últimos 10 anos, assistiu‐se a uma significativa redução do número de hospitais (de sensivelmente 90 para 50 unidades), exclusivamente através das fusões e sem quaisquer alterações no número de estruturas físicas existentes. Não obstante os argumentos justificativos desta reforma, a avaliação dos objectivos implícitos é insuficiente. Neste âmbito, pretendeu‐se com este estudo contribuir para a análise do impacte da criação de centros hospitalares na redução de gastos, isto é, verificar se a consolidação e consequente reengenharia dos processos produtivos teve consequencias ao nível da obtenção de economias de escala. Para esta análise usou‐se uma base de dados em painel, onde se consideraram 75 hospitais durante 7 anos (2003‐2009), número que foi reduzindo ao longo do período em análise devido às inúmeras fusões já referidas. Para avaliar os ganhos relativos às fusões hospitalares, ao nível da eficiência técnica e das economias de escala, recorreu‐se à fronteira estocástica especificada função custo translog. Estimada a fronteira, foi possível analisar três centros hospitalares específicos, onde se comparou o período pré‐fusão (2005‐2006) com o período após a fusão (2008‐2009). Como variáveis explicativas, relativas à produção hospitalar, considerou‐se o número de casos tratados e os dias de internamento (Vita, 1990; Schuffham et al., 1996), o número de consultas e o número de urgências, sendo estas variáveis as mais comuns na literatura (Vita, 1990; Fournier e Mitchell, 1992; Carreira, 1999). Quanto à variável dependente usou‐se o custo variável total, que compreende o total de custos anuais dos hospitais excepto de imobilizado. Como principais conclusões da investigação, em consequência da criação dos centros hospitalares, são de referir os ganhos de escala na fusão de hospitais de reduzida dimensão e com mais serviços complementares. --------ABSTRACT - Driven by the current pressure on resources induced by budgetary cuts, the Portuguese Ministry of Health is imposing changes in the management model and organization of NHS hospitals. The most recent change is based on the creation of Hospital Centres that are a result of administrative mergers of existing hospitals. In less than 10 years the number of hospitals passed from around 90 to around 50, only due to the mergers and without any change in the existing number of physical institutions. According to the political discourse, one of the main goals expected from this measure is the creation of synergies and more efficiency in the use of available resources. However, the merger of the hospitals has been a political decision without support or evaluation of the first experiments. The aim of this study is to measure the results of this policy by looking at economies of scale namely through reductions in the expenditures, as expected and sought by the MoH. Data used covers 7 years (2003‐2009) and 75 hospitals, number that has been reduced my the enoumerous mergers during the last decade. This work uses a stochastic frontier analysis through the translog cost function to examine the gains from mergers, which were decomposed into technical efficiency and economies of scale. It was analised these effects by the creation of three specific hospital centers, using a longitudinal approach to compare the period pre‐merger (2003‐2006) with the post‐merger period (2007‐09). To measure changes in inpatient hospital production volume and length of stay are going to be considered as done by Vita (1990) and Schuffham et al. (1996). For outpatient services the number of consultations and emergencies are going to be considered (Vita, 1990; Fournier e Mitchell, 1992; Carreira, 1999). Total variable cost is considered as the dependent variable explained the aforementioned ones. After a review of the literature results expected point to benefits from the mergers, namely a reduction in total expenditures and in the number of duplicated services. Results extracted from our data point in the same direction, and thus for the existence of some economies of scale only for small hospitals.

Embolização das artérias prostáticas no tratamento da hiperplasia benigna da próstata : estudo anátomo-clínico

Resumo: A hiperplasia benigna da próstata (HBP) tem elevada prevalência nos homens entre os 50 e 79 anos de idade, sendo ubiquitária com o envelhecimento. Devido à significativa morbi-mortalidade associada aos tratamentos médicos e cirúrgicos currentemente disponíveis, são necessárias novas tecnologias para melhorar os resultados e minimizar o desconforto dos doentes. Recentemente, estudos preliminares de experimentação animal e em 3 doentes tratados, sugeriram a embolização arterial prostática selectiva (EAPS) como hipótese terapêutica para a HBP. Decidimos investigar se a EAPS poderia ser um procedimento bem sucedido no tratamento da HBP gravemente sintomática. Para tal realizámos um estudo anátomo-radiológico e clínico em 63 doentes com recurso a uma terapêutica inovadora minimamente invasiva guiada pela imagem. Avaliámos 126 hemipélvis com recurso a Angio-RM, Angio-TC e Angiografia Digital de Subtracção, com o intuito de definir os padrões básicos de bifurcação das artérias ilíacas internas até agora apenas descritos em estudos cadavéricos. Estudámos ainda o suprimento vascular arterial prostático, identificando: 1 as artérias prostáticas; 2 origem e direcção; 3 os ramos intra-prostáticos; 4 anastomoses com outras artérias. Em relação aos resultados anatómicos, identificámos 181 artérias prostáticas, já que em 43.7% das hemipélvis existiam dois pedículos arteriais prostáticos com origens independentes. A origem mais frequente foi a artéria pudenda interna (39.7%), seguida do tronco comum glúteo-pudendo (21%) e da artéria vesical superior (18.2%). Origens menos frequentes foram a artéria obturadora (12.1%), as artérias glúteas inferior (3.9%)ou superior (1.7%), ramos rectais provenientes da artéria mesentérica inferior (1.7%) e a artéria pudenda acessória (1.7%). Identificaram-se anastomoses com as artérias adjacentes em 57.9% dos casos: com a terminação da artéria pudenda interna (41.6%),artérias prostáticas contra-laterais (18.2%) e homo-laterais (11.7%), com ramos rectais (15.6%) e com artérias vesicais (12.9%). Em relação ao estudo clínico tratámos 63 doentes (idades compreendidas entre 52 - 82 anos, média 69.5 anos) com HBP gravemente sintomática refractária à terapêutica médica há mais de 6 meses. Foi possível avaliação após o tratamento em 37 doentes: média de seguimento de 4.7 meses (variando entre 1 e 12 meses). A EAPS unilateral foi possível em todos os doentes, com embolização bilateral em 73% dos casos. A embolização bilateral não foi possível em 27% dos casos devido a tortuosidade, alterações ateroescleróticas e pequeno calibre das artérias ilíacas e/ou prostáticas. Em média houve uma melhoria do International Prostate Symptom Score (IPSS) de 10.8 pontos, da QoL de 1.5 pontos e do Internationl Index of Erectile Function (IIEF) de 2.1 pontos. Houve uma redução média do PSA de 30% (2.4 ng/mL), um aumento do pico de fluxo urinário (Qmax) de 3.1 - 3.85 mL/s e uma redução média do volume prostático de 21% (18.5 mL). Registou-se uma complicação major: pequena área de isquémia da parede vesical tratada cirurgicamente. Em 75% dos doentes tratados obteve-se sucesso clínico com franca melhoria dos sintomas, enquanto 25% dos doentes foram considerados insucesso clínico por se ter registado uma fraca ou ausente melhoria sintomática após a embolização. Os restantes doentes tratados estão sob controlo evolutivo, pararam toda a medicação prostática, sem qualquer caso de disfunção sexual associada com o tratamento. Este trabalho constitui o primeiro estudo anatómico descritivo in vivo das artérias prostáticas, conseguido devido à utilização de técnicas de imagem nunca usadas para este fim. O uso clínico dos dados anatómicos acima referidos permitiu a implementação de técnicas de Radiologia de Intervenção no tratatamento de uma doença de elevada prevalência. ------------------------------- ABSTRACT: Benign prostatic hyperplasia (BPH) has high prevalence in men aged 50–79 years being ubiquitous with aging. Due to significant morbi-mortality associated with currently available medical and surgical treatments, there is the need for innovative technologies to continue to improve outcomes and minimize patient discomfort and morbidity. Recently, prostatic arterial embolization (PAE) was suggested as a treatmentoption for BPH based on preliminary results from animal studies and 3 treated patients. We decided to investigate if PAE might be a successful treatment option for severely symptomatic BPH patients. We performed a clinical and anatomical-radiological study in 63 patients with the use of an inovative image-guided minimally invasive technique. We evaluated 126 pelvic sides using Angio-MR or Angio-CT and Catheter Angiography before embolisation to treat symptomatic BPH. We aimed to define the main branching patterns of the male internal iliac arteries, so far only studied in the cadaver. We also evaluated the prostatic arterial supply, identifying: 1 the prostatic arteries; 2 origin and direction; 3 intra-prostatic branches; 4 anastomoses with surrounding arteries. Regarding the anatomical study we identified 181 prostatic arteries, because in 43.7% of pelvic sides 2 separate prostatic vascular pedicles were found. The most frequent origin was the internal pudendal artery (39.7%) with the common glutealpudendal trunk (21%) and superior vesical arteries (18.2%) the next commonest. Less frequent origins were the obturator artery (12.1%), the inferior (3.9%) or superior (1.7%) gluteal arteries, rectal branches from the inferior mesenteric artery (1.7%) and the accessory pudendal artery (1.7%). There were anastomoses with the surrounding arteries in 57.9% of cases: termination of the internal pudendal artery (41.6%), contralateral prostatic arteries (18.2%), same-side prostatic arteries (11.7%), rectal branches (15.6%), and vesical arteries (12.9%).Regarding the clinical study, we treated 63 patients aged 52–82 years (mean 69.5 years) who presented with symptomatic BPH refractory to medical treatment for at least 6 months. Follow-up evaluation (mean 4.7 months, range 1-12 months) was possible in 37 patients. PAE was achieved in all patients with bilateral embolization in 73%. In 27% PAE was performed unilaterally due to tortuosity, atherosclerotic changes and small size of iliac and prostatic arteries. There was a mean decrease in the IPSS of 10.8 points, a mean improvement in QoL of 1.5 points, and a mean increase in the sexual function score of 2.1 points. There was a mean PSA reduction of 30% (2.4 ng/mL), a Qmax increase of 3.1 to 3.85 mL/sec, and a mean prostate volume decrease of 21% (18.5 mL). There was one major complication: a small area of bladder wall ischemia treated by surgery. Overall, 75% of patients were considered clinical success with major improvement after PAE, while 25% of patients were considered clinical failure with little or no improvement after PAE. All remaining patients are under follow-up, stopped all prostatic medication, and reported no sexual dysfunction. This study is the first one to describe the radiological anatomy of the prostatic arteries, with the use of imaging techniques never used for this purpose before. The clinical use of the anatomical findings allowed the implementation of Interventional Radiology tehniques in the treatment of a disease with a high prevalence.

Is There Sufficient Training of Health Care Staff on Noise Reduction in Neonatal Intensive Care Units? a Pilot Study From NeoNoise Project

Evidence indicates that exposure to high levels of noise adversely affects human health, and these effects are dependent upon various factors. In hospitals, there are many sources of noise, and high levels exert an impact on patients and staff, increasing both recovery time and stress, respectively. The goal of this pilot study was to develop, implement and evaluate the effectiveness of a training program (TP) on noise reduction in a Neonatal Intensive Care Units (NICU) by comparing the noise levels before and after the implementation of the program. A total of 79 health professionals participated in the study. The measurements of sound pressure levels took into account the layout of the unit and location of the main sources of noise. General results indicated that LAeq levels before implementation of the training program were often excessive, ranging from 48.7 ± 2.94 dBA to 71.7 ± 4.74 dBA, exceeding international guidelines. Similarly following implementation of the training program noise levels remained unchanged (54.5 ± 0.49 dBA to 63.9 ± 4.37 dBA), despite a decrease in some locations. There was no significant difference before and after the implementation of TP. However a significant difference was found for Lp, Cpeak, before and after training staff, suggesting greater care by healthcare professionals performing their tasks. Even recognizing that a TP is quite important to change behaviors, this needs to be considered in a broader context to effectively control noise in the NICU.

Characterization of Nitric Oxide Reductase (NOR) from pseudomonas nautica, a study on biologic nitric oxide reduction

Dissertation submitted to obtain the phD degree in Biochemistry, specialty in Physical- Biochemistry, by the Faculdade de Ciências e Tecnologia from the Universidade Nova de Lisboa

Measuring the cytochrome c nitrite reductase activity—practical considerations on the enzyme assays

Hindawi Publishing Corporation Bioinorganic Chemistry and Applications Volume 2010, Article ID 634597, 8 pages

Utilidade do Doppler Tecidular na Predição de Eventos Arrítmicos em Adultos com Tetralogia de Fallot Corrigida

INTRODUCTION: Adults with repaired tetralogy of Fallot (TOF) may be at risk for progressive right ventricular (RV) dilatation and dysfunction, which is commonly associated with arrhythmic events. In frequently volume-overloaded patients with congenital heart disease, tissue Doppler imaging (TDI) is particularly useful for assessing RV function. However, it is not known whether RV TDI can predict outcome in this population. OBJECTIVE: To evaluate whether RV TDI parameters are associated with supraventricular arrhythmic events in adults with repaired TOF. METHODS: We studied 40 consecutive patients with repaired TOF (mean age 35 +/- 11 years, 62% male) referred for routine echocardiographic exam between 2007 and 2008. The following echocardiographic measurements were obtained: left ventricular (LV) ejection fraction, LV end-systolic volume, LV end-diastolic volume, RV fractional area change, RV end-systolic area, RV end-diastolic area, left and right atrial volumes, mitral E and A velocities, RV myocardial performance index (Tei index), tricuspid annular plane systolic excursion (TAPSE), myocardial isovolumic acceleration (IVA), pulmonary regurgitation color flow area, TDI basal lateral, septal and RV lateral peak diastolic and systolic annular velocities (E' 1, A' 1, S' 1, E' s, A' s, S' s, E' rv, A' rv, S' rv), strain, strain rate and tissue tracking of the same segments. QRS duration on resting ECG, total duration of Bruce treadmill exercise stress test and presence of exercise-induced arrhythmias were also analyzed. The patients were subsequently divided into two groups: Group 1--12 patients with previous documented supraventricular arrhythmias (atrial tachycardia, fibrillation or flutter) and Group 2 (control group)--28 patients with no previous arrhythmic events. Univariate and multivariate analysis was used to assess the statistical association between the studied parameters and arrhythmic events. RESULTS: Patients with previous events were older (41 +/- 14 vs. 31 +/- 6 years, p = 0.005), had wider QRS (173 +/- 20 vs. 140 +/- 32 ms, p = 0.01) and lower maximum heart rate on treadmill stress testing (69 +/- 35 vs. 92 +/- 9%, p = 0.03). All patients were in NYHA class I or II. Clinical characteristics including age at corrective surgery, previous palliative surgery and residual defects did not differ significantly between the two groups. Left and right cardiac chamber dimensions and ventricular and valvular function as evaluated by conventional Doppler parameters were also not significantly different. Right ventricular strain and strain rate were similar between the groups. However, right ventricular myocardial TDI systolic (Sa: 5.4+2 vs. 8.5 +/- 3, p = 0.004) and diastolic indices and velocities (Ea, Aa, septal E/Ea, and RV free wall tissue tracking) were significantly reduced in patients with arrhythmias compared to the control group. Multivariate linear regression analysis identified RV early diastolic velocity as the sole variable independently associated with arrhythmic history (RV Ea: 4.5 +/- 1 vs. 6.7 +/- 2 cm/s, p = 0.01). A cut-off for RV Ea of < 6.1 cm/s identified patients in the arrhythmic group with 86% sensitivity and 59% specificity (AUC = 0.8). CONCLUSIONS: Our results suggest that TDI may detect RV dysfunction in patients with apparently normal function as assessed by conventional echocardiographic parameters. Reduction in RV early diastolic velocity appears to be an early abnormality and is associated with occurrence of arrhythmic events. TDI may be useful in risk stratification of patients with repaired tetralogy of Fallot.