The Making of Experimental Economics: Witness Seminar on the Emergence of a Field

This book is the transcript of a witness seminar on the history of experimental economics, in which eleven high-profile experimental economists participated, including Nobel Laureates Vernon Smith, Reinhard Selten and Alvin Roth. The witness seminar was constructed along four different topics: skills, community, laboratory, and funding. The transcript is preceded by an introduction explaining the method of the witness seminar and its specific set-up and resuming its results. The participants' contribution and their lively discussion provide a wealth of insights into the emergence of experimental economics as a field of research.

Fast and economic immobilization methods described for non-commercial Pseudomonas lipases

There is an increasing interest to seek new enzyme preparations for the development of new products derived from bioprocesses to obtain alternative bio-based materials. In this context, four non-commercial lipases from Pseudomonas species were prepared, immobilized on different low-cost supports, and examined for potential biotechnological applications. Results: To reduce costs of eventual scaling-up, the new lipases were obtained directly from crude cell extracts or from growth culture supernatants, and immobilized by simple adsorption on Accurel EP100, Accurel MP1000 and Celite (R) 545. The enzymes evaluated were LipA and LipC from Pseudomonas sp. 42A2, a thermostable mutant of LipC, and LipI. 3 from Pseudomonas CR611, which were produced in either homologous or heterologous hosts. Best immobilization results were obtained on Accurel EP100 for LipA and on Accurel MP1000 for LipC and its thermostable variant. Lip I. 3, requiring a refolding step, was poorly immobilized on all supports tested ( best results for Accurel MP1000). To test the behavior of immobilized lipases, they were assayed in triolein transesterification, where the best results were observed for lipases immobilized on Accurel MP1000. Conclusions: The suggested protocol does not require protein purification and uses crude enzymes immobilized by a fast adsorption technique on low-cost supports, which makes the method suitable for an eventual scaling up aimed at biotechnological applications. Therefore, a fast, simple and economic method for lipase preparation and immobilization has been set up. The low price of the supports tested and the simplicity of the procedure, skipping the tedious and expensive purification steps, will contribute to cost reduction in biotechnological lipase-catalyzed processes.

Trabecular bone score in type 1 diabetes--a cross-sectional study.

UNLABELLED: Trabecular bone score (TBS) seems to provide additive value on BMD to identify individuals with prevalent fractures in T1D. TBS did not significantly differ between T1D patients and healthy controls, but TBS and HbA1c were independently associated with prevalent fractures in T1D. A TBS cutoff <1.42 reflected prevalent fractures with 91.7 % sensitivity and 43.2 % specificity. INTRODUCTION: Type 1 diabetes (T1D) increases the risk of osteoporotic fractures. TBS was recently proposed as an indirect measure of bone microarchitecture. This study aimed at investigating the TBS in T1D patients and healthy controls. Associations with prevalent fractures were tested. METHODS: One hundred nineteen T1D patients (59 males, 60 premenopausal females; mean age 43.4 ± 8.9 years) and 68 healthy controls matched for gender, age, and body mass index (BMI) were analyzed. The TBS was calculated in the lumbar region, based on two-dimensional (2D) projections of DXA assessments. RESULTS: TBS was 1.357 ± 0.129 in T1D patients and 1.389 ± 0.085 in controls (p = 0.075). T1D patients with prevalent fractures (n = 24) had a significantly lower TBS than T1D patients without fractures (1.309 ± 0.125 versus 1.370 ± 0.127, p = 0.04). The presence of fractures in T1D was associated with lower TBS (odds ratio = 0.024, 95 % confidence interval (CI) = 0.001-0.875; p = 0.042) but not with age or BMI. TBS and HbA1c were independently associated with fractures. The area-under-the curve (AUC) of TBS was similar to that of total hip BMD in discriminating T1D patients with or without prevalent fractures. In this set-up, a TBS cutoff <1.42 discriminated the presence of fractures with a sensitivity of 91.7 % and a specificity of 43.2 %. CONCLUSIONS: TBS values are lower in T1D patients with prevalent fractures, suggesting an alteration of bone strength in this subgroup of patients. Reliable TBS cutoffs for the prediction of fracture risk in T1D need to be determined in larger prospective studies.

Construcció d'un equip per a la producció de cervesa artesana

Catalunya és un dels territoris on hi ha hagut més auge del sector de la cervesa artesana, i són molt nombroses les microcerveseries i les botigues especialitzades on es poden trobar els recursos materials necessaris, a més de ser centres difusió de coneixements relacionats. Així, doncs, aquest projecte està emmarcat en un context que permet el desenvolupament de tècniques d’elaboració de cervesa artesana. Aquest projecte es basa en la construcció d’un equip amb materials reutilitzats i amb un pressupost limitat que permet reproduir a petita escala els processos d’elaboració que es duen a terme en les microcerveseries artesanes actuals. El projecte s’ha assentat sobre la comprensió dels fonaments teòrics i pràctics del procés d’elaboració de cervesa, i amb l’experiència inicial d’elaboració de cervesa amb un equip bàsic de tipus homebrewer. Per minimintzar costos els tancs s’han construït a partir de barrils de cervesa i les parts sobrants s’han aprofitat per a altres elements. S’han emprat elements quotidians com una olla a pressió i s’ha construït un sistema regulador de pressió (per al tanc de fermentació cilindrocònic isobàric construït) en lloc d’adquirir-lo. S’ha posat l’èmfasi en minimitzar la necessitat de manipulació manual durant l’elaboració. Per tant, s’han instal·lat els components de l’equip formant un circuit tancat amb sistema de bombeig, i s’ha incorporat un sistema que permet el control i la lectura de les temperatures de cada procés. Altres elements són el sistema de filtres amb mecanisme de tub en forma d’ela (que permet l’extracció del most dels tanc de maceració i de cocció d’una manera efectiva i sense necessitat de manipulació) i el sistema de dutxa (que permet automatitzar el procés de rentat i filtrat). Un element que distingeix aquest equip d’altres equips emprats en algunes microcerveseries artesanes és el tanc de fermentació cilindrocònic isobàric amb vàlvula controladora de pressió, que permet prescindir de la doble fermentació en ampolla, ja que permet aprofitar el gas carbònic produït durant la fermentació per la carbonatació de la cervesa. Es pot concloure que gràcies a les seves característiques, l’equip permet realitzar successives elaboracions obtenint el mateix producte amb les mateixes característiques organolèptiques, principalement gràcies a la cambra de fermentació, que permet realitzar les etapes de fermentació, maduració i clarificació controlant la temperatura desitjada; al tanc de maceració amb aïllament, que permet realitzar el procés a temperatura constant sense pèrdues tèrmiques i al sistema de control de temperatura de totes les etapes. L’únic inconvenient és que, degut a la manca pressupostària, ha estat impossible l’adquisició d’un sistema d’embotellament isobàric que permeti realitzar l’embotellament sense pèrdues del gas carbònic. Per tant, el producte final pot embotellar-se amb una lleugera pèrdua de gas o es pot emmagatzemar en el mateix fermentador cilindrocònic per al seu consum directe, a l’estil d’alguns brewpubs.

Aerosol therapy in intensive and intermediate care units: prospective observation of 2808 critically ill patients.

PURPOSE: Unlike in the outpatient setting, delivery of aerosols to critically ill patients may be considered complex, particularly in ventilated patients, and benefits remain to be proven. Many factors influence aerosol delivery and recommendations exist, but little is known about knowledge translation into clinical practice. METHODS: Two-week cross-sectional study to assess the prevalence of aerosol therapy in 81 intensive and intermediate care units in 22 countries. All aerosols delivered to patients breathing spontaneously, ventilated invasively or noninvasively (NIV) were recorded, and drugs, devices, ventilator settings, circuit set-up, humidification and side effects were noted. RESULTS: A total of 9714 aerosols were administered to 678 of the 2808 admitted patients (24 %, CI95 22-26 %), whereas only 271 patients (10 %) were taking inhaled medication before admission. There were large variations among centers, from 0 to 57 %. Among intubated patients 22 % (n = 262) received aerosols, and 50 % (n = 149) of patients undergoing NIV, predominantly (75 %) inbetween NIV sessions. Bronchodilators (n = 7960) and corticosteroids (n = 1233) were the most frequently delivered drugs (88 % overall), predominantly but not exclusively (49 %) administered to patients with chronic airway disease. An anti-infectious drug was aerosolized 509 times (5 % of all aerosols) for nosocomial infections. Jet-nebulizers were the most frequently used device (56 %), followed by metered dose inhalers (23 %). Only 106 (<1 %) mild side effects were observed, despite frequent suboptimal set-ups such as an external gas supply of jet nebulizers for intubated patients. CONCLUSIONS: Aerosol therapy concerns every fourth critically ill patient and one-fifth of ventilated patients.

Consultation for Disordered Puberty: What Do Adolescent Medicine Patients Teach Us?

The period of adolescence is not only marked by important growth and pubertal events, but is also characterized by important psychosocial changes driven by a search for autonomy and the construction of one's identity. It can thus be easily understood that puberty disorders interfere heavily with these process, requiring from the endocrinologist not only medical knowledge, but also a great deal of emotional and psychological skills. They must progressively move from an educational approach that heavily involves the parents to one of shared information and decision making that places the young patient at the center of the therapeutic process. This can be achieved in several ways: respecting the affective and cognitive development of the adolescent; securing his privacy and (if requested by him) confidentiality; exploring his self-image and self-esteem and adapting the therapeutic process to the patient's expectations; reviewing the teenager's lifestyle, including the issue of sexuality and sexual behavior, and involving him in any therapeutic choice that has to be made, even if it does not match with the parents' expectations. The skills required for this respectful and holistic follow-up often exceed the abilities of any physician; it is thus suggested that a team approach involving a clinical nurse and/or a psychologist and/or social worker(s) be set up whenever possible.

Sleep in vitro : Erk pathway regulates sleep duration and sleep related genes

To date, for most biological and physiological phenomena, the scientific community has reach a consensus on their related function, except for sleep, which has an undetermined, albeit mystery, function. To further our understanding of sleep function(s), we first focused on the level of complexity at which sleep-like phenomenon can be observed. This lead to the development of an in vitro model. The second approach was to understand the molecular and cellular pathways regulating sleep and wakefulness, using both our in vitro and in vivo models. The third approach (ongoing) is to look across evolution when sleep or wakefulness appears. (1) To address the question as to whether sleep is a cellular property and how this is linked to the entire brain functioning, we developed a model of sleep in vitro by using dissociated primary cortical cultures. We aimed at simulating the major characteristics of sleep and wakefulness in vitro. We have shown that mature cortical cultures display a spontaneous electrical activity similar to sleep. When these cultures are stimulated by waking neurotransmitters, they show a tonic firing activity, similar to wakefulness, but return spontaneously to the "sleep-like" state 24h after stimulation. We have also shown that transcriptional, electrophysiological, and metabolic correlates of sleep and wakefulness can be reliably detected in dissociated cortical cultures. (2) To further understand at which molecular and cellular levels changes between sleep and wakefulness occur, we have used a pharmacological and systematic gene transcription approach in vitro and discovered a major role played by the Erk pathway. Indeed, pharmacological inhibition of this pathway in living animals decreased sleep by 2 hours per day and consolidated both sleep and wakefulness by reducing their fragmentation. (3) Finally, we tried to evaluate the presence of sleep in one of the most primitive species with a neural network. We set up Hydra as a model organism. We hypothesized that sleep as a cellular (neuronal) property may occur with the appearance of the most primitive nervous system. We were able to show that Hydra have periodic rest phases amounting to up to 5 hours per day. In conclusion, our work established an in vitro model to study sleep, discovered one of the major signaling pathways regulating vigilance states, and strongly suggests that sleep is a cellular property highly conserved at the molecular level during evolution. -- Jusqu'à ce jour, la communauté scientifique s'est mise d'accord sur la fonction d'une majorité des processus physiologiques, excepté pour le sommeil. En effet, la fonction du sommeil reste un mystère, et aucun consensus n'est atteint le concernant. Pour mieux comprendre la ou les fonctions du sommeil, (1) nous nous sommes d'abord concentré sur le niveau de complexité auquel un état ressemblant au sommeil peut être observé. Nous avons ainsi développé un modèle du sommeil in vitro, (2) nous avons disséqué les mécanismes moléculaires et cellulaires qui pourraient réguler le sommeil, (3) nous avons cherché à savoir si un état de sommeil peut être trouvé dans l'hydre, l'animal le plus primitif avec un système nerveux. (1) Pour répondre à la question de savoir à quel niveau de complexité apparaît un état de sommeil ou d'éveil, nous avons développé un modèle du sommeil, en utilisant des cellules dissociées de cortex. Nous avons essayé de reproduire les corrélats du sommeil et de l'éveil in vitro. Pour ce faire, nous avons développé des cultures qui montrent les signes électrophysiologiques du sommeil, puis quand stimulées chimiquement passent à un état proche de l'éveil et retournent dans un état de sommeil 24 heures après la stimulation. Notre modèle n'est pas parfait, mais nous avons montré que nous pouvions obtenir les corrélats électrophysiologiques, transcriptionnels et métaboliques du sommeil dans des cellules corticales dissociées. (2) Pour mieux comprendre ce qui se passe au niveau moléculaire et cellulaire durant les différents états de vigilance, nous avons utilisé ce modèle in vitro pour disséquer les différentes voies de signalisation moléculaire. Nous avons donc bloqué pharmacologiquement les voies majeures. Nous avons mis en évidence la voie Erkl/2 qui joue un rôle majeur dans la régulation du sommeil et dans la transcription des gènes qui corrèlent avec le cycle veille-sommeil. En effet, l'inhibition pharmacologique de cette voie chez la souris diminue de 2 heures la quantité du sommeil journalier et consolide l'éveil et le sommeil en diminuant leur fragmentation. (3) Finalement, nous avons cherché la présence du sommeil chez l'Hydre. Pour cela, nous avons étudié le comportement de l'Hydre pendant 24-48h et montrons que des périodes d'inactivité, semblable au sommeil, sont présentes dans cette espèce primitive. L'ensemble de ces travaux indique que le sommeil est une propriété cellulaire, présent chez tout animal avec un système nerveux et régulé par une voie de signalisation phylogénétiquement conservée.

Colony-colony interactions between highly invasive ants

Among invasive species, ants are a particularly prominent group with enormous impacts on native biodiversity and ecosystem functioning. Globalization and on-going climate change are likely to increase the rate of ant invasions in the future, leading to simultaneous introductions of several highly invasive species within the same area, Here, we investigate pairwise interactions among four highly invasive species, Linepithema humile,Lashis neglectus, Pheidole megacephala and Wasmannia auropunctata, at the whole colony level, using a laboratory set-up. :Each colony consisted of 300 workers and one queen. The number of surviving workers in the competing colonies was recorded daily over 7 weeks. We modelled the survival of each colony during pairwise colony interactions, using a nonlinear model characterizing the survival dynamics of each colony individually. The least dominant species was P. megacephala, which always went extinct. Interactions among the three other species showed more complex dynamics, rendering the outcome of the interactions less predictable. Overall, W auropunctata and L neglectus were the most dominant species. This study shows the importance of scaling up to the colony level in order to gain realism in predicting the outcome of multiple invasions.

Raspberry Pi: a 35-dollar device for viewing DICOM images

Raspberry Pi is a low-cost computer created with educational purposes. It uses Linux and, most of times, freeware applications, particularly a software for viewing DICOM images. With an external monitor, the supported resolution (1920 × 1200 pixels) allows for the set up of simple viewing workstations at a reduced cost.

Postmating-prezygotic isolation between two allopatric populations of Drosophila montana: fertilisation success differs under sperm competition

Postmating but prezygotic (PMPZ) interactions are increasingly recognized as a potentially important early-stage barrier in the evolution of reproductive isolation. A recent study described a potential example between populations of the same species: single matings between Drosophila montana populations resulted in differential fertilisation success because of the inability of sperm from one population (Vancouver) to penetrate the eggs of the other population (Colorado). As the natural mating system of D. montana is polyandrous (females remate rapidly), we set up double matings of all possible crosses between the same populations to test whether competitive effects between ejaculates influence this PMPZ isolation. We measured premating isolation in no-choice tests, female fecundity, fertility and egg-to-adult viability after single and double matings as well as second-male paternity success (P-2). Surprisingly, we found no PMPZ reproductive isolation between the two populations under a competitive setting, indicating no difficulty of sperm from Vancouver males to fertilize Colorado eggs after double matings. While there were subtle differences in how P-2 changed over time, suggesting that Vancouver males' sperm are somewhat less competitive in a first-male role within Colorado females, these effects did not translate into differences in overall P-2. Fertilisation success can thus differ dramatically between competitive and noncompetitive conditions, perhaps because the males that mate second produce higher quality ejaculates in response to sperm competition. We suggest that unlike in more divergent species comparisons, where sperm competition typically increases reproductive isolation, ejaculate tailoring can reduce the potential for PMPZ isolation when recently diverged populations interbreed.

The cutting of cocaine and heroin: a critical review

The illicit drug cutting represents a complex problem that requires the sharing of knowledge from addiction studies, toxicology, criminology and criminalistics. Therefore, cutting is not well known by the forensic community. Thus, this review aims at deciphering the different aspects of cutting, by gathering information mainly from criminology and criminalistics. It tackles essentially specificities of cocaine and heroin cutting. The article presents the detected cutting agents (adulterants and diluents), their evolution in time and space and the analytical methodology implemented by forensic laboratories. Furthermore, it discusses when, in the history of the illicit drug, cutting may take place. Moreover, researches studying how much cutting occurs in the country of destination are analysed. Lastly, the reasons for cutting are addressed. According to the literature, adulterants are added during production of the illicit drug or at a relatively high level of its distribution chain (e.g. before the product arrives in the country of destination or just after its importation in the latter). Their addition seems hardly justified by the only desire to increase profits or to harm consumers' health. Instead, adulteration would be performed to enhance or to mimic the illicit drug effects or to facilitate administration of the drug. Nowadays, caffeine, diltiazem, hydroxyzine, levamisole, lidocaïne and phenacetin are frequently detected in cocaine specimens, while paracetamol and caffeine are almost exclusively identified in heroin specimens. This may reveal differences in the respective structures of production and/or distribution of cocaine and heroin. As the relevant information about cutting is spread across different scientific fields, a close collaboration should be set up to collect essential and unified data to improve knowledge and provide information for monitoring, control and harm reduction purposes. More research, on several areas of investigation, should be carried out to gather relevant information.

Analyse de réseau piéton et gestion scolaire: sinuosité, centricité et transport optimal régularisé

Que ce soit d'un point de vue, urbanistique, social, ou encore de la gouvernance, l'évolution des villes est un défi majeur de nos sociétés contemporaines. En offrant la possibilité d'analyser des configurations spatiales et sociales existantes ou en tentant de simuler celles à venir, les systèmes d'information géographique sont devenus incontournables dans la gestion et dans la planification urbaine. En cinq ans la population de la ville de Lausanne est passée de 134'700 à 140'570 habitants, alors que les effectifs de l'école publique ont crû de 12'200 à 13'500 élèves. Cet accroissement démographique associé à un vaste processus d'harmonisation de la scolarité obligatoire en Suisse ont amené le Service des écoles à mettre en place et à développer en collaboration avec l'université de Lausanne des solutions SIG à même de répondre à différentes problématiques spatiales. Établies en 1989, les limites des établissements scolaires (bassins de recrutement) ont dû être redéfinies afin de les réadapter aux réalités d'un paysage urbain et politique en pleine mutation. Dans un contexte de mobilité et de durabilité, un système d'attribution de subventions pour les transports publics basé sur la distance domicile-école et sur l'âge des écoliers, a été conçu. La réalisation de ces projets a nécessité la construction de bases de données géographiques ainsi que l'élaboration de nouvelles méthodes d'analyses exposées dans ce travail. Cette thèse s'est ainsi faite selon une dialectique permanente entre recherches théoriques et nécessités pratiques. La première partie de ce travail porte sur l'analyse du réseau piéton de la ville. La morphologie du réseau est investiguée au travers d'approches multi-échelles du concept de centralité. La première conception, nommée sinuo-centralité ("straightness centrality"), stipule qu'être central c'est être relié aux autres en ligne droite. La deuxième, sans doute plus intuitive, est intitulée centricité ("closeness centrality") et exprime le fait qu'être central c'est être proche des autres (fig. 1, II). Les méthodes développées ont pour but d'évaluer la connectivité et la marchabilité du réseau, tout en suggérant de possibles améliorations (création de raccourcis piétons). Le troisième et dernier volet théorique expose et développe un algorithme de transport optimal régularisé. En minimisant la distance domicile-école et en respectant la taille des écoles, l'algorithme permet de réaliser des scénarios d'enclassement. L'implémentation des multiplicateurs de Lagrange offre une visualisation du "coût spatial" des infrastructures scolaires et des lieux de résidence des écoliers. La deuxième partie de cette thèse retrace les aspects principaux de trois projets réalisés dans le cadre de la gestion scolaire. À savoir : la conception d'un système d'attribution de subventions pour les transports publics, la redéfinition de la carte scolaire, ou encore la simulation des flux d'élèves se rendant à l'école à pied. *** May it be from an urbanistic, a social or from a governance point of view, the evolution of cities is a major challenge in our contemporary societies. By giving the opportunity to analyse spatial and social configurations or attempting to simulate future ones, geographic information systems cannot be overlooked in urban planning and management. In five years, the population of the city of Lausanne has grown from 134'700 to 140'570 inhabitants while the numbers in public schools have increased from 12'200 to 13'500 students. Associated to a considerable harmonisation process of compulsory schooling in Switzerland, this demographic rise has driven schooling services, in collaboration with the University of Lausanne, to set up and develop GIS capable of tackling various spatial issues. Established in 1989, the school districts had to be altered so that they might fit the reality of a continuously changing urban and political landscape. In a context of mobility and durability, an attribution system for public transport subventions based on the distance between residence and school and on the age of the students was designed. The implementation of these projects required the built of geographical databases as well as the elaboration of new analysis methods exposed in this thesis. The first part of this work focuses on the analysis of the city's pedestrian network. Its morphology is investigated through multi-scale approaches of the concept of centrality. The first conception, named the straightness centrality, stipulates that being central is being connected to the others in a straight line. The second, undoubtedly more intuitive, is called closeness centrality and expresses the fact that being central is being close to the others. The goal of the methods developed is to evaluate the connectivity and walkability of the network along with suggesting possible improvements (creation of pedestrian shortcuts).The third and final theoretical section exposes and develops an algorithm of regularised optimal transport. By minimising home to school distances and by respecting school capacity, the algorithm enables the production of student allocation scheme. The implementation of the Lagrange multipliers offers a visualisation of the spatial cost associated to the schooling infrastructures and to the student home locations. The second part of this thesis recounts the principal aspects of three projects fulfilled in the context of school management. It focuses namely on the built of an attribution system for public transport subventions, a school redistricting process and on simulating student pedestrian flows.

Online and Offline Participation at the Local level: A Quantitative Analysis of the Catalan Municipalities

This article presents an analysis on local participatory experiences in Catalonia,both online and in-person. The analysis is based on a database set up by theauthors. The article carries out an explanatory analysis of local participatoryinitiatives (on- and offline) taking into account political variables (not usually con-sidered in this kind of analysis) and also classical socio-economic variables thatcharacterize municipalities. Hence, we add a quantitative analysis to the numerouscase studies on local e-participation experiences. We have chosen Catalonia becauseit is one of the European regions with more initiatives and a considerable localgovernment support for citizen participation initiatives since the 1980s. Thearticle offers a characterization of these experiences and an explanatory analysis,considering: (i) the institutional context in which these experiences are embedded,(ii) the citizen participation processes and mechanisms online and (iii) a set ofexplanatory variables composed of the population size and the province to whichthe municipality belongs, the political tendency of the mayor, the electoral absten-tion rate, age, income, level of education, broadband connection and users of theInternet in the municipality. The model that we present is explanatory for munici-palities with more than 20,000 inhabitants but it is not for fewer than 20,000inhabitants. Actually, the majority of these latter municipalities have not developedany participatory activities. Among all the variables, population size is the mostinfluential variable and affects the influence of other variables, such as the politicalparty of the mayor, the local abstention rate and the province.

Aquisição de tempos de vida de fosforescência com resolução de fase e sua aplicação ao estudo de relaxações em polímeros

We describe in this work a simple experimental set up to perform time dependent luminescence experiments in time scales from mili-seconds to seconds, based on the phase resolution of the emission signal. This system is composed by modulation of a continuous light source with an external chopper controlled by a lock-in amplifier. We exemplified the utility of the system in studies of phosphorecence emission using benzophenone dissolved in polystyrene and since the phosphorescence intensity and lifetime are temperature-dependent processes, we also studied polymer relaxation processes in the temperature range from 20 to 400K. A software that drives the spectrofluorimeter and controls both the cryosystem and the lock-in amplifier was developed.

Monitoimityöstökeskuksen kokonaistehokkuuden parantaminen kokonaisvaltaisella tuottavalla kunnossapidolla

Tämän diplomityön tavoitteena oli tutustua kokonaisvaltaisen tuottavan kunnossapidon teoriaan ja soveltaa sitä Abloy Oy Joensuun tehtaalla pilottikohteeksi valittuun koneeseen. Pilottikohteeksi oli valittu uusi Sveitsiläinen Hydromat-monitoimityöstökeskus, jonka kokonaistehokkuutta (OEE) pyrittiin parantamaan kokonaisvaltaisella tuottavalla kunnossapidolla (TPM). Työn kirjallisuusosuudessa tarkastellaan teoriatietoja, jotka liittyvät yleisesti kunnossapitoon ja tarkemmin TPM-toimintaan. Lisäksi käsitellään kunnossapidon mittareita ja tietojärjestelmiä. Työn empiirisessä osassa selvitetään, kuinka TPM-toiminta otettiin käyttöön Hydromat-monitoimityöstökeskuksen osalta. Eniten resursseja käytettiin koneen asetusaikojen lyhentämiseen. Lisäksi koneen käyttäjien itsenäiseen kunnossapitoon siirtyminen kuului työn sisältöön. Työssä on selvitetty myös uuden tuotannon seurantataulun käyttöönotto. Seurantataulusta nähdään useita tuotantotietoja kuten kokonaistehokkuus. Työn merkittävimmät tulokset osoittavat, että asetusajat ovat tällä hekellä hyvin pitkiä tavoitteisiin nähden. Asetusaikojen lyhentyminen halutulle tasolle vaatii koneen käyttäjien pitkän oppimisprosessin sekä optimaaliset toimintaolosuhteet. Lisäksi havaittiin, että uuden toimintamallin esitteleminen ja sen käyttöönotto valmistavassa teollisuudessa on vaativa prosessi.