Phobos: The design and implementation of embedded software for a low cost radar warning receiver

This portfolio thesis describes work undertaken by the author under the Engineering Doctorate program of the Institute for System Level Integration. It was carried out in conjunction with the sponsor company Teledyne Defence Limited. A radar warning receiver is a device used to detect and identify the emissions of radars. They were originally developed during the Second World War and are found today on a variety of military platforms as part of the platform’s defensive systems. Teledyne Defence has designed and built components and electronic subsystems for the defence industry since the 1970s. This thesis documents part of the work carried out to create Phobos, Teledyne Defence’s first complete radar warning receiver. Phobos was designed to be the first low cost radar warning receiver. This was made possible by the reuse of existing Teledyne Defence products, commercial off the shelf hardware and advanced UK government algorithms. The challenges of this integration are described and discussed, with detail given of the software architecture and the development of the embedded application. Performance of the embedded system as a whole is described and qualified within the context of a low cost system.

Terminal defect analysis and classification methodology for automotive industry

The impact of end customer quality complaints with direct relationship with automotive components has presented negative trend at European level for the entire automotive industry. Thus, this research proposal is to concentrate efforts on the most important items of Pareto chart and understand the failure type and the mechanism involved, link and impact of the project and parameters on the process, ending it with the development of one of the company’s most desired tool, that hosted this project – European methodology of terminals defects classification, and listing real opportunities for improvement based on measurement and analysis of actual data. Through the development of terminals defects classification methodology, which is considered a valuable asset to the company, all the other companies of the YAZAKI’s group will be able to characterize terminals as brittle or ductile, in order to put in motion, more efficiently, all the other different existing internal procedures for the safeguarding of the components, improving manufacturing efficiency. Based on a brief observation, nothing can be said in absolute sense, concerning the failure causes. Base materials, project, handling during manufacture and storage, as well as the cold work performed by plastic deformation, all play an important role. However, it was expected that this failure has been due to a combination of factors, in detriment of the existence of a single cause. In order to acquire greater knowledge about this problem, unexplored by the company up to the date of commencement of this study, was conducted a thorough review of existing literature on the subject, real production sites were visited and, of course, the actual parts were tested in lab environment. To answer to many of the major issues raised throughout the investigation, were used extensively some theoretical concepts focused on the literature review, with a view to realizing the relationship existing between the different parameters concerned. Should here be stated that finding technical studies on copper and its alloys is really hard, not being given all the desirable information. This investigation has been performed as a YAZAKI Europe Limited Company project and as a Master Thesis for Instituto Superior de Engenharia do Porto, conducted during 9 months between 2012/2013.

Strategic tillage in no-till farming systems in Australia's northern grains-growing regions: I. Drivers and implementation

Development of no-tillage (NT) farming has revolutionized agricultural systems by allowing growers to manage greater areas of land with reduced energy, labour and machinery inputs to control erosion, improve soil health and reduce greenhouse gas emission. However, NT farming systems have resulted in a build-up of herbicide-resistant weeds, an increased incidence of soil- and stubble-borne diseases and enrichment of nutrients and carbon near the soil surface. Consequently, there is an increased interest in the use of an occasional tillage (termed strategic tillage, ST) to address such emerging constraints in otherwise-NT farming systems. Decisions around ST uses will depend upon the specific issues present on the individual field or farm, and profitability and effectiveness of available options for management. This paper explores some of the issues with the implementation of ST in NT farming systems. The impact of contrasting soil properties, the timing of the tillage and the prevailing climate exert a strong influence on the success of ST. Decisions around timing of tillage are very complex and depend on the interactions between soil water content and the purpose for which the ST is intended. The soil needs to be at the right water content before executing any tillage, while the objective of the ST will influence the frequency and type of tillage implement used. The use of ST in long-term NT systems will depend on factors associated with system costs and profitability, soil health and environmental impacts. For many farmers maintaining farm profitability is a priority, so economic considerations are likely to be a primary factor dictating adoption. However, impacts on soil health and environment, especially the risk of erosion and the loss of soil carbon, will also influence a grower's choice to adopt ST, as will the impact on soil moisture reserves in rainfed cropping systems. © 2015 Elsevier B.V.

Comprehensive economic and financial analysis of the enterprise activity: approaches, methods and implementation

This thesis intends to analyse the performance and the efficiency of companies and to identify the key factors that may explain it. A comprehensive analysis based on a set of economic and financial ratios was studied as an instrument which provides information on enterprise performance and its efficiency. It was selected a sample with 15 enterprises: 7 Portuguese and 8 Ukrainian ones, belonging to several industries. Financial and non-financial data was collected for 6 years, during the period of 2009 to 2014. Research questions that guided this work were: Are the enterprises efficient/profitable? What factors influence enterprises’ efficiency/performance? Is there any difference between Ukrainian and Portuguese enterprises’ efficiency/performance, which factors have more influence? Which industrial sector is represented by more efficient/profitable enterprises? The main results showed that in average enterprises were efficient; comparing by states Ukrainian enterprises are more efficient; industries have similar level of efficiency. Among factors that influence ATR positively are fixed and current assets turnover ratios, ROA; negatively influencing are EBITDA margin and liquidity ratio. There is no significant difference between models by country. Concerning profitability, enterprises have low performance level but in comparison of countries Ukrainian enterprises have better profitability in average. Regarding the industry sector, paper industry is the most profitable. Among factors influencing ROA are profit margin, fixed asset turnover ratio, EBITDA margin, Debt to equity ratio and the country. In case of profitability both countries have different models. For Ukrainian enterprises is suggested to pay attention on factors of Short-term debt to total debt, ROA, Interest coverage ratio in order to be more efficient; Profit margin and EBITDA margin to make their performance better. For Portuguese enterprises for improving efficiency the observation and improvement of fixed assets turnover ratio, current assets turnover ratio, Short-term financial debt to total debt, Leverage Ratio, EBITDA margin is suggested; for improving higher profitability track fixed assets turnover ratio, current assets turnover ratio, Debt to equity ratio, Profit margin and Interest coverage ratio is suggested.

Living Adolescence in Family" parenting program: adaptation and implementation in social and school contexts

Adolescence is a developmental period that implies a series of rapid changes that might complicate the role of parents. This study evaluates changes in parental monitoring and the strategies to solve family conflicts reported by parents who participated in the "Living Adolescence in Family" program in local social services and school centers. In addition, the study analyses the moderating role of family and facilitator variables that may affect the final results. The participants were 697 parents attending the social services (438 in the intervention group and 259 in the control group) and 1283 parents from school centers (880 in the intervention group and 403 in the control group). The results showed that families from local social services decreased the amount of control and improved monitoring in education and leisure spheres as well as self-disclosure whereas the families coming from school centers improved supervision in leisure and in self-disclosure. In addition, both groups of families improved their strategies for solving family conflicts, increasing the use of integrative strategies and decreasing the use of dominant strategies. There were differences across contexts: the results of the program in the social services context differed according to the participant and professional profiles whereas program results were more homogeneous in the school context. In sum, the program appears to be an efficient work tool, both for the professionals who work with at-risk families with adolescents and for the teachers who make use of the program for families with children at risk of early school dropout.

Development of a brand and implementation of a promotional campaign for the products of Ria de Aveiro focus on brand identity and brand positioning

Directed internship

Habitat selection and phenotypic diversity in the anchovy of the Bay of Biscay

Diversity among individuals in a population is an important feature linking vital rates with behaviour and spatial occupation. We measured the growth increments in the otolith of individual fishes collected on the annual fisheries survey PELGAS from 2001 to 2015. Individuals who grew larger at juvenile stage occupied later in life more off-shore habitats. Further, we analysed the allozymes of 13 different loci from 2001 to 2006. Alleles of the enzyme IDH showed different frequencies in inshore and offshore habitats. The population spatially segregates along a coast to off-shore gradient with individuals showing different early growth and allele frequencies. Results show how individuals in a population segregate spatially in different habitats in relation with phenotypic diversity. This implies modelling the population with individual-based and physiological approaches to fully grasp its dynamics. It also implies developing management strategies to conserve infra-population diversity as a means to garantee the occupation of the full range of habitats.

The transformed-stationary approach: a generic and simplified methodology for non-stationary extreme value analysis

Statistical approaches to study extreme events require, by definition, long time series of data. In many scientific disciplines, these series are often subject to variations at different temporal scales that affect the frequency and intensity of their extremes. Therefore, the assumption of stationarity is violated and alternative methods to conventional stationary extreme value analysis (EVA) must be adopted. Using the example of environmental variables subject to climate change, in this study we introduce the transformed-stationary (TS) methodology for non-stationary EVA. This approach consists of (i) transforming a non-stationary time series into a stationary one, to which the stationary EVA theory can be applied, and (ii) reverse transforming the result into a non-stationary extreme value distribution. As a transformation, we propose and discuss a simple time-varying normalization of the signal and show that it enables a comprehensive formulation of non-stationary generalized extreme value (GEV) and generalized Pareto distribution (GPD) models with a constant shape parameter. A validation of the methodology is carried out on time series of significant wave height, residual water level, and river discharge, which show varying degrees of long-term and seasonal variability. The results from the proposed approach are comparable with the results from (a) a stationary EVA on quasi-stationary slices of non-stationary series and (b) the established method for non-stationary EVA. However, the proposed technique comes with advantages in both cases. For example, in contrast to (a), the proposed technique uses the whole time horizon of the series for the estimation of the extremes, allowing for a more accurate estimation of large return levels. Furthermore, with respect to (b), it decouples the detection of non-stationary patterns from the fitting of the extreme value distribution. As a result, the steps of the analysis are simplified and intermediate diagnostics are possible. In particular, the transformation can be carried out by means of simple statistical techniques such as low-pass filters based on the running mean and the standard deviation, and the fitting procedure is a stationary one with a few degrees of freedom and is easy to implement and control. An open-source MAT-LAB toolbox has been developed to cover this methodology, which is available at https://github.com/menta78/tsEva/(Mentaschi et al., 2016).

The scientific rationale, design and implementation plan for a Biogeochemical-Argo float array

Biogeochemical-Argo is the extension of the Argo array of profiling floats to include floats that are equipped with biogeochemical sensors for pH, oxygen, nitrate, chlorophyll, suspended particles, and downwelling irradiance. Argo is a highly regarded, international program that measures the changing ocean temperature (heat content) and salinity with profiling floats distributed throughout the ocean. Newly developed sensors now allow profiling floats to also observe biogeochemical properties with sufficient accuracy for climate studies. This extension of Argo will enable an observing system that can determine the seasonal to decadal-scale variability in biological productivity, the supply of essential plant nutrients from deep-waters to the sunlit surface layer, ocean acidification, hypoxia, and ocean uptake of CO2. Biogeochemical-Argo will drive a transformative shift in our ability to observe and predict the effects of climate change on ocean metabolism, carbon uptake, and living marine resource management. Presently, vast areas of the open ocean are sampled only once per decade or less, with sampling occurring mainly in summer. Our ability to detect changes in biogeochemical processes that may occur due to the warming and acidification driven by increasing atmospheric CO2, as well as by natural climate variability, is greatly hindered by this undersampling. In close synergy with satellite systems (which are effective at detecting global patterns for a few biogeochemical parameters, but only very close to the sea surface and in the absence of clouds), a global array of biogeochemical sensors would revolutionize our understanding of ocean carbon uptake, productivity, and deoxygenation. The array would reveal the biological, chemical, and physical events that control these processes. Such a system would enable a new generation of global ocean prediction systems in support of carbon cycling, acidification, hypoxia and harmful algal blooms studies, as well as the management of living marine resources. In order to prepare for a global Biogeochemical-Argo array, several prototype profiling float arrays have been developed at the regional scale by various countries and are now operating. Examples include regional arrays in the Southern Ocean (SOCCOM ), the North Atlantic Sub-polar Gyre (remOcean ), the Mediterranean Sea (NAOS ), the Kuroshio region of the North Pacific (INBOX ), and the Indian Ocean (IOBioArgo ). For example, the SOCCOM program is deploying 200 profiling floats with biogeochemical sensors throughout the Southern Ocean, including areas covered seasonally with ice. The resulting data, which are publically available in real time, are being linked with computer models to better understand the role of the Southern Ocean in influencing CO2 uptake, biological productivity, and nutrient supply to distant regions of the world ocean. The success of these regional projects has motivated a planning meeting to discuss the requirements for and applications of a global-scale Biogeochemical-Argo program. The meeting was held 11-13 January 2016 in Villefranche-sur-Mer, France with attendees from eight nations now deploying Argo floats with biogeochemical sensors present to discuss this topic. In preparation, computer simulations and a variety of analyses were conducted to assess the resources required for the transition to a global-scale array. Based on these analyses and simulations, it was concluded that an array of about 1000 biogeochemical profiling floats would provide the needed resolution to greatly improve our understanding of biogeochemical processes and to enable significant improvement in ecosystem models. With an endurance of four years for a Biogeochemical-Argo float, this system would require the procurement and deployment of 250 new floats per year to maintain a 1000 float array. The lifetime cost for a Biogeochemical-Argo float, including capital expense, calibration, data management, and data transmission, is about $100,000. A global Biogeochemical-Argo system would thus cost about $25,000,000 annually. In the present Argo paradigm, the US provides half of the profiling floats in the array, while the EU, Austral/Asia, and Canada share most the remaining half. If this approach is adopted, the US cost for the Biogeochemical-Argo system would be ~$12,500,000 annually and ~$6,250,000 each for the EU, and Austral/Asia and Canada. This includes no direct costs for ship time and presumes that float deployments can be carried out from future research cruises of opportunity, including, for example, the international GO-SHIP program (http://www.go-ship.org). The full-scale implementation of a global Biogeochemical-Argo system with 1000 floats is feasible within a decade. The successful, ongoing pilot projects have provided the foundation and start for such a system.

Design and implementation of efficient diminished reality mechanisms

Se trata de la descripción y estudio del sistema de realidad disminuida que se ha desarrollado en este proyecto. La memoria está elaborada en inglés.

The Relationship between Faculty Perceptions and Implementation of Elements of Transactional Distance Theory and Online Web-Based Course Completion Rates

The purpose of this study was to explore the relationship between faculty perceptions, selected demographics, implementation of elements of transactional distance theory and online web-based course completion rates. This theory posits that the high transactional distance of online courses makes it difficult for students to complete these courses successfully; too often this is associated with low completion rates. Faculty members play an indispensable role in course design, whether online or face-to-face. They also influence course delivery format from design through implementation and ultimately to how students will experience the course. This study used transactional distance theory as the conceptual framework to examine the relationship between teaching and learning strategies used by faculty members to help students complete online courses. Faculty members’ sex, number of years teaching online at the college, and their online course completion rates were considered. A researcher-developed survey was used to collect data from 348 faculty members who teach online at two prominent colleges in the southeastern part of United States. An exploratory factor analysis resulted in six factors related to transactional distance theory. The factors accounted for slightly over 65% of the variance of transactional distance scores as measured by the survey instrument. Results provided support for Moore’s (1993) theory of transactional distance. Female faculty members scored higher in all the factors of transactional distance theory when compared to men. Faculty number of years teaching online at the college level correlated significantly with all the elements of transactional distance theory. Regression analysis was used to determine that two of the factors, instructor interface and instructor-learner interaction, accounted for 12% of the variance in student online course completion rates. In conclusion, of the six factors found, the two with the highest percentage scores were instructor interface and instructor-learner interaction. This finding, while in alignment with the literature concerning the dialogue element of transactional distance theory, brings a special interest to the importance of instructor interface as a factor. Surprisingly, based on the reviewed literature on transactional distance theory, faculty perceptions concerning learner-learner interaction was not an important factor and there was no learner-content interaction factor.

Selection and Passage of County Land Preservation Voter Referendum: The Role of Government

County jurisdictions in America are increasingly exercising self-government in the provision of public community services through the context of second order federalism. In states exercising this form of contemporary governance, county governments with “reformed” policy-making structures and professional management practices, have begun to rival or surpass municipalities in the delivery of local services with regional implications such as environmental protection (Benton 2002, 2003; Marando and Reeves, 1993). The voter referendum, a form of direct democracy, is an important component of county land preservation and environmental protection governmental policies. The recent growth and success of land preservation voter referendums nationwide reflects an increase in citizen participation in government and their desire to protect vacant land and its natural environment from threats of over-development, urbanization and sprawl, loss of open space and farmland, deterioration of ecosystems, and inadequate park and recreational amenities. The study’s design employs a sequential, mixed method. First, a quantitative approach employs the Heckman two-step model. It is fitted with variables for the non-random sample of 227 voter referendum counties and all non-voter referendum counties in the U.S. from 1988 to 2009. Second, the qualitative data collected from the in-depth investigation of three South Florida county case studies with twelve public administrator interviews is transformed for integration with the quantitative findings. The purpose of the qualitative method is to complement, explain and enrich the statistical analysis of county demographic, socio-economic, terrain, regional, governance and government, political preference, environmentalism, and referendum-specific factors. The research finds that government factors are significant in terms of the success of land preservation voter referendums; more specifically, the presence of self-government authority (home rule charter), a reformed structure (county administrator/manager or elected executive), and environmental interest groups. In addition, this study concludes that successful counties are often located coastal, exhibit population and housing growth, and have older and more educated citizens who vote democratic in presidential elections. The analysis of case study documents and public administrator interviews finds that pragmatic considerations of timing, local politics and networking of regional stakeholders are also important features of success. Further research is suggested utilizing additional public participation, local government and public administration factors.

Foreign-born CEOs, Country-Specific Skills, Selection, and Strategic Consequences

In this dissertation, I first suggest an extension of the managerial rents model and more specifically the managerial skills typology that it offers. Building on research in international business, I propose adding country-specific skills (CSS) to this typology in addition to firm-specific, industry-specific, and generic skills. I define CSS as managers’ abilities that are applicable and specific to a particular national institutional context. Such skills are distinct from the other three types identified and are likely to influence managers’ performance and the performance of their firms. So if CSS are distinct skills, what are the implications for strategy and international business research? In an attempt to respond to this question, I conduct two empirical essays in which I examine the implications of this refinement of the typology of managerial skills for CEO selection and firms’ mergers and acquisitions (M&A) strategy. In the first empirical essay, I puzzle at the fact that although CSS constitute a barrier to high-level executive mobility across countries, there have been a growing number of foreign-born CEOs being appointed across the globe. Why are these individuals being selected for the post of CEO? Using information on the appointment of foreign-born and national CEOs from 2005 to 2010 among global 500 companies, I show that internationalization pressures help explain their selection and that two types of firms are likely to appoint foreign leaders: highly internationalized firms and firms that are likely to internationalize. In the second empirical essay, I examine the strategic implications of country-specific skills. Employing the same sample as the one used in the first empirical essay, I demonstrate that given that their mindset is likely to be less focused on firms’ home market, foreign-born CEOs may be prone to institute more changes in firms’ cross-border M&A strategy than their domestic counterparts. I also theorize on the moderating influence of CEOs’ insiderness.