On the connectivity of the escaping set for complex exponential Misiurewicz parameters

Let $ E_{\lambda}(z)=\lambda {\rm exp}(z), \lambda\in \mathbb{C}$, be the complex exponential family. For all functions in the family there is a unique asymptotic value at 0 (and no critical values). For a fixed $ \lambda$, the set of points in $ \mathbb{C}$ with orbit tending to infinity is called the escaping set. We prove that the escaping set of $ E_{\lambda}$ with $ \lambda$ Misiurewicz (that is, a parameter for which the orbit of the singular value is strictly preperiodic) is a connected set.

A new ambulatory system for comparative evaluation of the three-dimensional knee kinematics, applied to anterior cruciate ligament injuries

The aim of this study was to develop an ambulatory system for the three-dimensional (3D) knee kinematics evaluation, which can be used outside a laboratory during long-term monitoring. In order to show the efficacy of this ambulatory system, knee function was analysed using this system, after an anterior cruciate ligament (ACL) lesion, and after reconstructive surgery. The proposed system was composed of two 3D gyroscopes, fixed on the shank and on the thigh, and a portable data logger for signal recording. The measured parameters were the 3D mean range of motion (ROM) and the healthy knee was used as control. The precision of this system was first assessed using an ultrasound reference system. The repeatability was also estimated. A clinical study was then performed on five unilateral ACL-deficient men (range: 19-36 years) prior to, and a year after the surgery. The patients were evaluated with the IKDC score and the kinematics measurements were carried out on a 30 m walking trial. The precision in comparison with the reference system was 4.4 degrees , 2.7 degrees and 4.2 degrees for flexion-extension, internal-external rotation, and abduction-adduction, respectively. The repeatability of the results for the three directions was 0.8 degrees , 0.7 degrees and 1.8 degrees . The averaged ROM of the five patients' healthy knee were 70.1 degrees (standard deviation (SD) 5.8 degrees), 24.0 degrees (SD 3.0 degrees) and 12.0 degrees (SD 6.3 degrees for flexion-extension, internal-external rotation and abduction-adduction before surgery, and 76.5 degrees (SD 4.1 degrees), 21.7 degrees (SD 4.9 degrees) and 10.2 degrees (SD 4.6 degrees) 1 year following the reconstruction. The results for the pathologic knee were 64.5 degrees (SD 6.9 degrees), 20.6 degrees (SD 4.0 degrees) and 19.7 degrees (8.2 degrees) during the first evaluation, and 72.3 degrees (SD 2.4 degrees), 25.8 degrees (SD 6.4 degrees) and 12.4 degrees (SD 2.3 degrees) during the second one. The performance of the system enabled us to detect knee function modifications in the sagittal and transverse plane. Prior to the reconstruction, the ROM of the injured knee was lower in flexion-extension and internal-external rotation in comparison with the controlateral knee. One year after the surgery, four patients were classified normal (A) and one almost normal (B), according to the IKDC score, and changes in the kinematics of the five patients remained: lower flexion-extension ROM and higher internal-external rotation ROM in comparison with the controlateral knee. The 3D kinematics was changed after an ACL lesion and remained altered one year after the surgery

Les fractures du pilon tibial. Etude rétrospective à long terme de 51 fractures traitées par réduction sanglante et ostéosynthèse [Fractures of the tibial pilon. Long-term retrospective study of 51 fractures treated with open reduction and osteosynthesis].

PURPOSE OF THE STUDY: Fracture of the tibial pilon is a rare injury and its treatment remains difficult. The aim of this study was to report the complications and long term results of internal fixation using a technique which respects soft tissues and in which little material was used. MATERIAL: From 1985 to 1990, 48 patients with 51 fractures of the tibial pilon were treated by open reduction and internal fixation. All patients were submitted to a clinical and radiological review. METHODS: Both the Rüedi/Allgöwer and the AO-classification were used and determined by standard X-rays. Surgical procedure was performed with a 2 or 3 1/3 tube AO-plates and the peroneus was always fixed if fractured. Intraoperative reconstruction was analyzed. Subjective and objective scoring were used according to Olerud and Molander and the ankle arthritis was scored according to the classification determined by the SOFCOT in 1992. RESULTS: A minimal follow-up of 1 year for all cases was obtained, based on our own files. Thirty-eight patients (40 fractures) were evaluated after an average period of 88 months (56 to 124 months). Five patients developed cutaneous infection, three developed deep infection and four developed superficial skin necrosis. One aseptic non-union necessitated reoperation after 14 months. Two ankles had joint fusion after 19 and 25 months respectively due to severe arthritis. In six cases infectious and non-infectious complications led to surgical revision. According to the Olerud and Molander score, 15 per cent of the results were excellent, 45 per cent were good, 30 per cent were fair and 10 per cent poor. DISCUSSION: Literature shows a wide range of results following this surgical procedure. This is due to the difference in the type of trauma, classification system used, material used for the internal fixation and method of evaluation. The classification system of Rüedi and Allgöwer is the most commonly used but has a rather subjective tendency, especially between type II and type III. Treatment is difficult, especially for comminutive fractures associated with soft tissue damage. In this case, open reduction and internal fixation could increase iatrogenic lesions. For this reason surgical procedure can be delayed for several days, little material is used and soft tissue manipulation is reduced to minimum. In other study reports, the use of external fixation with or without minimal internal fixation have produced less complications without improving long term results. CONCLUSION: Analysis and comparison of study reports are difficult because of the absence of consensus in classification system and evaluation methods. The AO-classification, apparently the most objective, will probably be more and more used in the future. Treatment must be adapted to the bony lesion and soft tissue damage. Open reduction and internal fixation must be reserved for a specific group of lesion.

Predictive value of the MGMT promoter methylation status in metastatic melanoma patients receiving first-line temozolomide plus bevacizumab in the trial SAKK 50/07.

The O6-methylguanine-DNA-methyltransferase (MGMT) promoter methylation status is a predictive parameter for the response of malignant gliomas to alkylating agents such as temozolomide. First clinical trials with temozolomide plus bevacizumab therapy in metastatic melanoma patients are ongoing, although the predictive value of the MGMT promoter methylation status in this setting remains unclear. We assessed MGMT promoter methylation in formalin-fixed, primary tumor tissue of metastatic melanoma patients treated with first-line temozolomide and bevacizumab from the trial SAKK 50/07 by methylation-specific polymerase chain reaction. In addition, the MGMT expression levels were also analyzed by MGMT immunohistochemistry. Eleven of 42 primary melanomas (26%) revealed a methylated MGMT promoter. Promoter methylation was significantly associated with response rates CR + PR versus SD + PD according to RECIST (response evaluation criteria in solid tumors) (p<0.05) with a trend to prolonged median progression-free survival (8.1 versus 3.4 months, p>0.05). Immunohistochemically different protein expression patterns with heterogeneous and homogeneous nuclear MGMT expression were identified. Negative MGMT expression levels were associated with overall disease stabilization CR + PR + SD versus PD (p=0.05). There was only a poor correlation between MGMT methylation and lack of MGMT expression. A significant proportion of melanomas have a methylated MGMT promoter. The MGMT promoter methylation status may be a promising predictive marker for temozolomide therapy in metastatic melanoma patients. Larger sample sizes may help to validate significant differences in survival type endpoints.

Equilibrium of the simultaneous etherification ofisobutene and isoamylenes with ethanol inliquid-phase

The simultaneous etherification of isobutene and isoamylenes with ethanol has been studied using macroreticu-lar acid ion-exchange resins as catalyst. Most of the experiments were carried out over Amberlyst-35. In addition,Amberlyst-15 and Purolite CT-275 were also tested. Chemical equilibrium of four chemical reactions was studied:ethyl tert-butyl ether formation, tert-amyl ethyl ether formation from isoamylenes (2-methyl-1-butene and 2-methyl-2-butene) and isomerization reaction between both isoamylenes. Equilibrium data were obtained in a batchwisestirred tank reactor operated at 2.0 MPa and within the temperature range from 323 to 353 K. Experimental molarstandard enthalpy and entropy changes of reaction were determined for each reaction. From these data, the molarenthalpy change of formation of ethyl tert-butyl ether and tert-amyl ethyl ether were estimated. Besides, the chemical equilibrium between both diisobutene dimers, 2,4,4-trimethyl-1-pentene and 2,4,4-trimethyl-2-pentene, wasevaluated. A good agreement between thermodynamic results for the simultaneous etherification carried out in thiswork and those obtained for the isolated ethyl tert-butyl ether and tert-amyl ethyl ether systems was obtained.

Functional plasticity of the LACK-reactive Vbeta4-Valpha8 CD4(+) T cells normally producing the early IL-4 instructing Th2 cell development and susceptibility to Leishmania major in BALB / c mice.

Early production of IL-4 by LACK-reactive Vbeta4-Valpha8 CD4(+) T cells instructs aberrant Th2 cell development and susceptibility to Leishmania major in BALB / c mice. This was demonstrated using Vbeta4(+)-deficient BALB / c mice as a result of chronic infection with MMTV (SIM), a mouse mammary tumor virus expressing a Vbeta4-specific superantigen. The early IL-4 response was absent in these mice which develop a Th1 response to L. major. Here, we studied the functional plasticity of LACK-reactive Vbeta4-Valpha8 CD4(+) T cells using BALB/ c mice inoculated with L. major shortly after infection with MMTV (SIM), i. e. before deletion of Vbeta4(+) cells. These mice fail to produce the early IL-4 response to L. major and instead exhibit an IFN-gamma response that occurs within LACK-reactive Vbeta4-Valpha8 CD4(+) T cells. Neutralization of IFN-gamma restores the production of IL-4 by these cells. These data suggest that the functional properties of LACK-reactive Vbeta4-Valpha8 CD4(+) T cells are not irreversibly fixed.

Mass and energy balance of the carbonization of babassu nutshell as affected by temperature

The objective of this work was to evaluate the carbonization yield of babassu nutshell as affected by final temperature, as well as the energy losses involved in the process. Three layers constituting the babassu nut, that is, the epicarp, mesocarp and endocarp, were used together. The material was carbonized, considering the following final temperatures: 450, 550, 650, 750, and 850ºC. The following were evaluated: energy and charcoal yields, pyroligneous liquid, non-condensable gases, and fixed carbon. The use of babassu nutshell can be highly feasible for charcoal production. The yield of charcoal from babassu nutshell carbonization was higher than that reported in the literature for Eucalyptus wood carbonization, considering the final temperature of 450ºC. Charcoal and energy yields decreased more sharply at lower temperatures, with a tendency to stabilize at higher temperatures. The energy yields obtained can be considered satisfactory, with losses between 45 and 52% (based on higher heating value) and between 43 and 49% (based on lower heating value) at temperatures ranging from 450 to 850ºC, respectively. Yields in fixed carbon and pyroligneous liquid are not affected by the final carbonization temperature.

Three-dimensional model of bubbling fluidized bed combustion

 Diplomityön tarkoituksena on kehittää kolmiulotteinen malli kerrosleijupoltolle. Työn kirjallisuusosa sisältää seuraavat perusteet kerrosleijupolton tekniikasta: yleistiedot, leijutus- ja palamisilmiöt, kiinteän aineen ja kaasun sekoittuminen, päästöt ja lämmönsiirto. Lisäksi palamissysteemin mallinnuksen perusteet ja ratkaisumenetelmät ovat esitelty. Työn mallinnusosassa kehitetty koodi on ohjelmoitu Fortran-ohjelmointikielellä. Kehitetty malli perustuu olemassa olevaan malliin kiertoleijupoltosta. Yhtälö kiintoainekonsentraatioprofiilille on vaihdettu ja kiertovirta on poistettu koodista. Mallilla on tehty herkkyystarkasteluja polttoaineen ja kaasun sekoittumisen sekä reaktiokertoimen vaikutukselle. Visualisointi on tehty ohjelmassa Tecplot 360 ja mallinnustuloksia on vertailtu mitattuihin tuloksiin. Mallin laskemattulokset vastaavat hyvin mittaustuloksia ja kokemusperäisiä tietoja; monissa tapauksissa malli pystyy kvantitatiivisesti kuvaamaan parametrien variointia ja kaikissa tapauksissa malli antaa ainakin kvalitatiivisesti oikeita tuloksia. Työhön liittyvän kehityksen ja mallinnuskokemuksen perusteella on tehty ehdotukset mallin tulevaa kehitystä ja mittauksia varten.

Heat Transfer Analysis of the EPR Core Catcher Test Facility Volley

Uusi EPR-reaktorikonsepti on suunniteltu selviytymään tapauksista, joissa reaktorinsydän sulaa ja sula puhkaisee paineastian. Suojarakennuksen sisälle on suunniteltu alue, jolle sula passiivisesti kerätään, pidätetään ja jäähdytetään. Alueelle laaditaan valurautaelementeistä ns.sydänsieppari, joka tulvitetaan vedellä. Sydänsulan tuottama jälkilämpö siirtyyveteen, mistä se poistetaan suojarakennuksen jälkilämmönpoistojärjestelmän kautta. Suuri osa lämmöstä poistuu sydänsulasta sen yläpuolella olevaan veteen, mutta lämmönsiirron tehostamiseksi myös sydänsiepparin alapuolelle on sijoitettu vedellä täytettävät jäähdytyskanavat. Jotta sydänsiepparin toiminta voitaisiin todentaa, on Lappeenrannan Teknillisellä Yliopistolla rakennettu Volley-koelaitteisto tätä tarkoitusta varten. Koelaitteisto koostuu kahdesta täysimittaisesta valuraudasta tehdystä jäähdytyskanavasta. Sydänsulan tuottamaa jälkilämpöä simuloidaan koelaitteistossa sähkövastuksilla. Tässä työssä kuvataan simulaatioiden suorittaminen ja vertaillaan saatuja arvoja mittaustuloksiin. Työ keskittyy sydänsiepparista jäähdytyskanaviin tapahtuvan lämmönsiirron teoriaan jamekanismeihin. Työssä esitetään kolme erilaista korrelaatiota lämmönsiirtokertoimille allaskiehumisen tapauksessa. Nämä korrelaatiot soveltuvat erityisesti tapauksiin, joissa vain muutamia mittausparametreja on tiedossa. Työn toinen osa onVolley 04 -kokeiden simulointi. Ensin käytettyä simulointitapaa on kelpoistettuvertaamalla tuloksia Volley 04 ja 05 -kokeisiin, joissa koetta voitiin jatkaa tasapainotilaan ja joissa jäähdytteen käyttäytyminen jäähdytyskanavassa on tallennettu myös videokameralla. Näiden simulaatioiden tulokset ovat hyvin samanlaisiakuin mittaustulokset. Korkeammilla lämmitystehoilla kokeissa esiintyi vesi-iskuja, jotka rikkoivat videoinnin mahdollistavia ikkunoita. Tämän johdosta osassa Volley 04 -kokeita ikkunat peitettiin metallilevyillä. Joitakin kokeita jouduttiin keskeyttämään laitteiston suurten lämpöjännitysten johdosta. Tällaisten testien simulaatiot eivät ole yksinkertaisia suorittaa. Veden pinnan korkeudesta ei ole visuaalista havaintoa. Myöskään jäähdytteen tasapainotilanlämpötiloista ei ole tarkkaa tietoa, mutta joitakin oletuksia voidaan tehdä samoilla parametreilla tehtyjen Volley 05 -kokeiden perusteella. Mittaustulokset Volley 04 ja 05 -kokeista, jotka on videoitu ja voitu ajaa tasapainotilaan saakka, antoivat simulaatioiden kanssa hyvin samankaltaisia lämpötilojen arvoja. Keskeytettyjen kokeiden ekstrapolointi tasapainotilaan ei onnistunut kovin hyvin. Kokeet jouduttiin keskeyttämään niin paljon ennen termohydraulista tasapainoa, ettei tasapainotilan reunaehtoja voitu ennustaa. Videonauhoituksen puuttuessa ei veden pinnan korkeudesta saatu lisätietoa. Tuloksista voidaan lähinnä esittää arvioita siitä, mitä suuruusluokkaa mittapisteiden lämpötilat tulevat olemaan. Nämä lämpötilat ovat kuitenkin selvästi alle sydänsiepparissa käytettävän valuraudan sulamislämpötilan. Joten simulaatioiden perusteella voidaan sanoa, etteivät jäähdytyskanavien rakenteet sula, mikäli niissä on pienikin jäähdytevirtaus, eikä useampia kuin muutama vierekkäinen kanava ole täysin kuivana.

Evaluation of the integrity of human corneal epithelium maintained in organ-culture during eye banking using Corneamax®

Purpose: Mediums have been developed to conserve corneal endothelium in organ-culture during eye banking. CorneaMax® is used by 25% of Eye Bank in Europe. Only little is known about conservation of corneal epithelium with this medium during banking. Its preservation could be of interest in clinic to cure corneal disease with stem cells deficiency. Therefore, we wanted to examine the integrity of human corneal epithelium maintained in CorneaMax®. Methods: Human corneas, considered unsuitable for transplantation, were obtained from the Eye Bank in Lausanne. Average post-mortem time was 14 hours. Cornoscleral rings were maintained in organ-culture in Corneamax® at 32°C. Samples were formalin-fixed after period ranging from 0 (D0) to 35 days (D35, N=5 for each time points) and stained with H&E. Proliferation and apoptosis were evaluated by immunostaining with antibody against Ki67 and Caspase3 respectively. Results: Corneas, which were not in organ-cultured (D0), showed different morphology, including intact epithelium with 5 to 7 layers, but also completely denuded basement membrane. In two cases, at D0, the epithelium lost its adherence to the basal lamina of the cornea creating a large epithelial sheet. During the two first days, corneas and limbus area lost totally their epithelium, except for some remaining limbal basal cells. From day 2 to day 10, regeneration of the epithelium took place, starting from the limbal region in direction to the central cornea. From day 10 to day 35, corneal epithelium appeared as an atrophic epithelium, consisting of only two cell layers. Proliferation happened in the whole cornea during the 35 days of organ-culture, as shown by Ki67 positive cells. Apoptosis was rarely detected in the corneal epithelium. Conclusions: Corneas maintained in CorneaMax® showed a complete disappearance of the corneal epithelium during the two first days and a conservation of limbal basal cells in the limbal region. These remaining cells allowed a full regeneration of the tissue, leading to an atrophic epithelium, composed of only two cell layers. This atrophic epithelium could be seen in all the organ-cultured corneas during the 35 days of conservation. This study is a first step to develop medium in organ-culture in order to conserve corneal epithelial cells.

Competitiveness Comparison of the Electricity Production Alternatives

The competitiveness comparison is carried out for merely electricity producing alternatives. In Finland, further construction of CHP (combined heat and power) power plants will continue and cover part of the future power supply deficit, but also new condensing power plant capacity will be needed. The following types of power plants are studied: - nuclear power plant, - coal-fired condensing power plant - combined cycle gas turbine plant, - peat-fired condensing power plant. - wood-fired condensing power plant - wind power plant The calculations have been made using the annuity method with a real interest rate of 5 % perannum and with a fixed price level as of March 2003. With the annual full load utilization time of 8000 hours the nuclear electricity would cost 23,7 ¤/MWh, the gas based electricity 32,3 ¤/MWh and coal based electricity 28,1 ¤/MWh. If the influence of emission trading is taken into account,the advantage of the nuclear power will still be improved. Inorder to study the impact of changes in the input data, a sensitivity analysis has been carried out. It reveals that the advantage of the nuclear power is quite clear. E.g. the nuclear electricity is rather insensitive tothe changes of the uranium price, whereas for natural gas alternative the rising trend of gas price causes the greatest risk.

Tehdaslogistiikka : value added logistics of the supply and demand chain costfix

VALOSADE (Value Added Logistics in Supply and Demand Chains) on Lappeenrannan teknillisen yliopiston ja sielläprofessori Anita Lukan VALORE -tutkimusryhmän toteuttama tutkimusprojekti, jonka rahoittaja on ollut Tekes. Projekti on osa Tekesin ELO - Elektronisen liiketoiminnan logistiikka - teknologiaohjelmaa. Tutkimusta rahoittivat Tekesin lisäksi neljä yritystä, jotka toimivat myös tutkimustyön kohteina ja toimivat tarpeen mukaan yhteistyössä tutkijoiden kanssa. Yritysten toimialat ovat metsäteollisuus, laitevalmistaja, joka tarjoaa myös tuotteilleen jälkimarkkinapalveluja sekä kaksi logistiikkapalveluyritystä. Tämä työraportti liittyy VALOSADE - tutkimusprojektin osaprojektiin Costfix (Paper Mill Process - from Fixed Costs into Variable Costs). Costfix - projektin tavoitteena on tutkia ja löytää paperiteollisuudelle uusia toimintamalleja, jotka mahdollistavat kiinteiden kustannusten muuttamisen muuttuviksi. Merkittävä tutkimuksen osa-alue on myös tutkimuskohteiden liike-toiminnan nykytilan aiempaa tarkempi selvittäminen. Tämä työraportti käsittelee kunnossapidon materiaalilogistiikan osalta tehtaan sisällä tapahtuvaa toimintaa, josta tässä tutkimuksessa käytetään nimitystä tehdaslogistiikka. Nykytilaselvityksen perusteella nykyinen prosessiteollisuudessa ja myös pääsääntöisesti valmistavassa teollisuudessa yleisesti vallitseva teollisuusyrityksen käyttöinvestointia ylläpitävän palveluprosessin toimintarakenne, johtamistapa ja prosessin operatiivisten tehtävien toimenkuvat eivät tue ko. palvelukokonaisuuden tehokasta ja tuloksellista toteuttamista. Nykymuotoinen toimintamalli pikemminkin rajoittaa toimintaprosessin kokonaishallintaa ja sen tehostamiseksi investoitujen uusien teknisten ratkaisujen ja teknologian käyttöönottoa. Lisäksi yleisesti vallitseva toimintakulttuuri (mm. arvokäsitykset, uskomukset sekä toiminnan ja tavoitteiden taustalla olevat motiivit) sekä vaikeuttaa nykyisen ja tulevan kilpailutilanteen edellyttämien tehokkuus- ja tuottavuustavoitteiden toteutumista että hidastaa uudistusten onnistumista edellyttävän muutoksen etenemistä yrityksen sisällä. Tutkimuksen tulokset vahvistivat osaltaan sen, että tehdas- ja toimintokeskeinen johtaminen aiheuttavat palveluprosessin eri tehtäville asetettujen tavoitteiden ja perustehtäväkäsityksen välille ristiriitoja, joista seuraa sekä suoria että välillisiä vaikutuksia teollisuusyrityksen tuotantoprosessin toiminnan laatuun ja tuotantolaitteiden käyttövarmuuteen. Palvelukokonaisuuteen kuuluvien eri toimintaprosessien tehtävät on jaettu ristiriitaisesti toiminnoille siten, että erityisestikunnossapidon teknisten toimihenkilöitten hoidettavana on sekä ihmisen henkilökohtaisen kapasiteettirajan ylittävä että toisistaan liian suuri erilaisia osaamisia ja ymmärrystä edellyttävä tehtävämäärä. Nykytilan palvelutuotannossa esiintyvien ongelmien seuraukset ja perussyyt osoittavat, että merkittävästi pääomia sitovan valmistavan teollisuuden (mm. prosessiteollisuus) käyttö-omaisuutta ylläpitävän palveluprosessin hallinta on ulkoistettava tehdastasolta itsenäisesti hoidettavaksi liiketoimintakokonaisuudeksi, jonka operatiivinen johtaminen tapahtuu toimintaprosesseittain konsernin ylätasolta käsin. Johtamismallissa painottuu prosessijohtaminen ja oman vastuualueen toimintaprosessin asiantuntemus. Lisäksi ihmisen osaamiseen, ymmärrykseen ja toimintatapaan perustuva palvelu edellyttää johtamiselta henkilöjohtamistaitoa ja osaamisen johtamista. Liiketoiminnan uudenlainen keskittyminen, verkostoituminen ja globalisoituminen edellyttävät johdoltamyös erilaisten toimintaverkostojen ja sidosryhmien toiminnan ja tarpeen ymmärtämistä. Tutkimustulosten perusteella myös palveluprosesseissa toimivien toimihenkilöitten tehtäväkuvia on muutettava radikaalisti ja osa uusista toimenkuvista edellyttää lisäksi henkilöitten osaamistason aktiivista parantamista. Tässä raportissa esitetään toimintamalli, jossa kuvataan tutkimuksen pohjalta luotu palvelukokonaisuuden johtamismalli ja palveluprosessien eri tehtävätasot tehtävineen. Kuvattu johtamismalli on ollut jo yleisesti käytössä yksittäisillä palvelualoilla, mutta tässä esitetty malli on valmistavan yrityksen teknisiin tukipalveluihin muokattu sovellus.

Propagation of the Ignition Front against Airflow in Packed Beds of Wood Particles

Combustion of wood is increasing because of the needs of decreasing the emissions of carbon dioxide and the amount of waste going to landfills. Wood based fuels are often scattered on a large area. The transport distances should be short enough to prevent too high costs, and so the size of heating and power plants using wood fuels is often rather small. Combustion technologies of small-size units have to be developed to reach efficient and environmentally friendly energy production. Furnaces that use different packed bed combustion or gasification techniques areoften most economic in small-scale energy production. Ignition front propagation rate affects the stability, heat release rate and emissions of packed bed combustion. Ignition front propagation against airflow in packed beds of wood fuels has been studied. The research has been carried out mainly experimentally. Theoretical aspects have been considered to draw conclusions about the experimental results. The effects of airflow rate, moisture content of the fuel, size, shape and density of particles, and porosity of the bed on the propagation rate of the ignition front have been studied. The experiments were carried out in a pot furnace. The fuels used in the experiments were mainly real wood fuels that are often burned in the production of energy. The fuel types were thin wood chips, saw dust, shavings, wood chips, and pellets with different sizes. Also a few mixturesof the above were tested. Increase in the moisture content of the fuel decreases the propagation rates of the ignition front and makes the range of possible airflow rates narrower because of the energy needed for the evaporation of water and the dilution of volatile gases due to evaporated steam. Increase in the airflow rate increases the ignition rate until a maximum rate of propagation is reached after which it decreases. The maximum flame propagation rate is not always reached in stoichiometric combustion conditions. Increase in particle size and density transfers the optimum airflow rate towards fuel lean conditions. Mixing of small and large particles is often advantageous, because small particles make itpossible to reach the maximum ignition rate in fuel rich conditions, and large particles widen the range of possible airflow rates. A correlation was found forthe maximum rate of ignition front propagation in different wood fuels. According to the correlation, the maximum ignition mass flux is increased when the sphericity of the particles and the porosity of the bed are increased and the moisture content of the fuel is decreased. Another fit was found between sphericity and porosity. Increase in sphericity decreases the porosity of the bed. The reasons of the observed results are discussed.

In situ spectroellipsometric study of the nucleation and growth of amorphous silicon

A detailed in situ spectroellipsometric analysis of the nucleation and growth of hydrogenated amorphous silicon (a:Si:H) is presented. Photoelectronic quality a‐Si:H films are deposited by plasma‐enhanced chemical vapor deposition on smooth metal (NiCr alloy) and crystalline silicon (c‐Si) substrates. The deposition of a‐Si:H is analyzed from the first monolayer up to a final thickness of 1.2 μm. In order to perform an improved analysis, real time ellipsometric trajectories are recorded, using fixed preparation conditions, at various photon energies ranging from 2.2 to 3.6 eV. The advantage of using such a spectroscopic experimental procedure is underlined. New insights into the nucleation and growth mechanisms of a‐Si:H are obtained. The nucleation mechanism on metal and c‐Si substrates is very accurately described assuming a columnar microstructural development during the early stage of the growth. Then, as a consequence of the incomplete coalescence of the initial nuclei, a surface roughness at the 10-15 Å scale is identified during the further growth of a‐Si:H on both substrates. The bulk a‐Si:H grows homogeneously beneath the surface roughness. Finally, an increase of the surface roughness is evidenced during the long term growth of a‐Si:H. However, the nature of the substrate influenced the film growth. In particular, the film thickness involved in the nucleation‐coalescence phase is found lower in the case of c‐Si (67±8 Å) as compared to NiCr (118±22 Å). Likewise films deposited on c‐Si present a smaller surface roughness even if thick samples are considered (>1 μm). More generally, the present study illustrates the capability of in situ spectroellipsometry to precisely analyze fundamental processes in thin‐film growth, but also to monitor the preparation of complex structures on a few monolayers scale.

Chemotherapy and radiotherapy in nasopharyngeal carcinoma: an update of the MAC-NPC meta-analysis.

BACKGROUND: A previous individual patient data meta-analysis by the Meta-Analysis of Chemotherapy in Nasopharynx Carcinoma (MAC-NPC) collaborative group to assess the addition of chemotherapy to radiotherapy showed that it improves overall survival in nasopharyngeal carcinoma. This benefit was restricted to patients receiving concomitant chemotherapy and radiotherapy. The aim of this study was to update the meta-analysis, include recent trials, and to analyse separately the benefit of concomitant plus adjuvant chemotherapy. METHODS: We searched PubMed, Web of Science, Cochrane Controlled Trials meta-register, ClinicalTrials.gov, and meeting proceedings to identify published or unpublished randomised trials assessing radiotherapy with or without chemotherapy in patients with non-metastatic nasopharyngeal carcinoma and obtained updated data for previously analysed studies. The primary endpoint of interest was overall survival. All trial results were combined and analysed using a fixed-effects model. The statistical analysis plan was pre-specified in a protocol. All data were analysed on an intention-to-treat basis. FINDINGS: We analysed data from 19 trials and 4806 patients. Median follow-up was 7·7 years (IQR 6·2-11·9). We found that the addition of chemotherapy to radiotherapy significantly improved overall survival (hazard ratio [HR] 0·79, 95% CI 0·73-0·86, p<0·0001; absolute benefit at 5 years 6·3%, 95% CI 3·5-9·1). The interaction between treatment effect (benefit of chemotherapy) on overall survival and the timing of chemotherapy was significant (p=0·01) in favour of concomitant plus adjuvant chemotherapy (HR 0·65, 0·56-0·76) and concomitant without adjuvant chemotherapy (0·80, 0·70-0·93) but not adjuvant chemotherapy alone (0·87, 0·68-1·12) or induction chemotherapy alone (0·96, 0·80-1·16). The benefit of the addition of chemotherapy was consistent for all endpoints analysed (all p<0·0001): progression-free survival (HR 0·75, 95% CI 0·69-0·81), locoregional control (0·73, 0·64-0·83), distant control (0·67, 0·59-0·75), and cancer mortality (0·76, 0·69-0·84). INTERPRETATION: Our results confirm that the addition of concomitant chemotherapy to radiotherapy significantly improves survival in patients with locoregionally advanced nasopharyngeal carcinoma. To our knowledge, this is the first analysis that examines the effect of concomitant chemotherapy with and without adjuvant chemotherapy as distinct groups. Further studies on the specific benefits of adjuvant chemotherapy after concomitant chemoradiotherapy are needed. FUNDING: French Ministry of Health (Programme d'actions intégrées de recherche VADS), Ligue Nationale Contre le Cancer, and Sanofi-Aventis.