Evaluation of Salmonella-Lytic Properties of Bacteriophages Isolated from Commercial Broiler Houses

Because of recent interest in bacteriophage therapy in poultry, information regarding the interaction of bacteriophages and potential host bacteria in the environment should be collected. The present studies were initiated with a rather typical commercial broiler integrator within the south-central United States to examine environmental Salmonella levels in two broiler complexes, attempt to isolate Salmonella-lytic bacteriophages, and elucidate a possible reason for differing apparent Salmonella prevalence. Significantly ( P<0.05) less Salmonella was isolated from houses in complex 1 ( 15/44 [ 34%] Salmonella-positive drag swabs) as compared to houses in complex 2 ( 22/24 [ 92%]). A total of seven Salmonella-lytic bacteriophages were isolated from Salmonella-positive environments, and two bacteriophages were isolated from a single Salmonella-negative house. During the initial bacteriophage isolation, individual bacteriophages did not replicate in the Salmonella host isolated from the same environment, and lysis of additional Salmonella hosts relied on high numbers of bacteriophage to be present. This suggests that the presence of these bacteriophages in the environment of a commercial broiler house had little to no effect on the presence of Salmonella. This study highlights the need to find additional bacteriophage sources, more effective isolation methods, and more innovative approaches to using bacteriophages to treat enteric disease.

Myenteric Denervation Downregulates Galectin-1 and-3 Expression in Gastric Carcinogenesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of constituents of the foliar wax of Didymopanax vinosum on the foraging activity of the leaf-cutting ant Atta sexdens rubropilosa

Leaf epicuticular waxes may affect substrate selection by leaf-cutting ants, and host recognition by several phytophagous insects. The influence of the crude epicuticular wax of Didymopanax vinosum E. March. (Araliaceae), and its major constituents lupeol and free primary alcohols, on substrate selection by the leaf-cutting ant Atta sexdens rubropilosa Forel, was investigated. Two ant colonies were used in laboratory bioassays. Corn flakes (zea) were impregnated with chloroform solutions of the substances being tested and fed to the adults. One of the colonies gave results, in most of the tests, not significantly different from the controls. The other colony, however, discriminated against the crude wax, a strong deterrent effect being observed from the first of a series of eight trials. The same colony was able to discriminate against lupeol after the second trial. The fraction of primary n-alcohols (22% C28, 66% C30 and 12% C32) deterred feeding only after the fifth trial. The results demonstrate that some constituents of epicuticular waxes may deter the foraging activity of A. sexdens rubropilosa, depending, however, on the colony under observation. It is suggested that lupeol, of the foliar wax of D. vinosum, is an important deterrent to leaf-cutting ants, although with less pronounced effects than those observed in tests with the crude wax.

Response to orphaning in two Neotropical termites: Armitermes euamignathus and Embiratermes festivellus

In this paper we examine the potential of the termites Armitermes euamignathus Silvestri: 1901 and Embiratermes festivellus (Silvestri, 1901) (Isoptera, Termitidae, Nasutitermitinae) to produce neotenics experimentally. Three nests of the mound-building termite A. euamignathus, from the Brazilian cerrado, had their primary queens removed in August 1994. After 12 months, only one mound survived; it had a normal appearance. In this healthy, orphaned colony we found the primary king, six physogastric nymphoid female replacement reproductives, two ergatoid female replacement reproductives, 46 nymphs, several presoldiers, soldiers, workers, larvae and many eggs. These data show that neotenics in A. euamignathus may originate from both workers and nymphs, but nymphoids are produced in larger numbers. The biometric study of nymphs and nymphoids suggests that these brachypterous neotenics were derived from third instar nymphs after a single moult or from four instar nymphs after a reduction of wing bud length. A piece of an E. festivellus nest with some third instar nymphs, soldiers and workers was kept under laboratory conditions. After 12 months, the whole experimental subcolony was examined and appeared to contain two pigmented nymphoid females, two pigmented nymphoid males, only one larva, seven nymphs of the same instar, 148 workers, five soldiers and many eggs. These results also indicate the capacity of the termite E. festivellus to produce nymphoid neotenics. These neotenic females were laying eggs, but they were not physogastric after a year, unlike some nymphoids of the same species collected from natural colonies.

Larval predation by Chrysomya albiceps on Cochliomyia macellaria, Chrysomya megacephala and Chrysomya putoria

Chrysomya albiceps, the larvae of which are facultative predators of larvae of other dipteran species, has been introduced to the Americas over recent years along with other Old World species of blowflies, including Chrysomya megacephala, Chrysomya putoria and Chlysomya rufifacies. An apparent correlate of this biological invasion has been a sudden decline in the population numbers of Cochliomyia macellaria, a native species of the Americas. In this study, we investigated predation rates on third instar larvae of C. macellaria, C. putoria and C. megacephala by third instar larvae of C. albiceps in no-choice, two-choice and three-choice situations. Most attacks by C. albiceps larvae occurred within the first hour of observation and the highest predation rate occurred on C. macellaria larvae, suggesting that C. albiceps was more dangerous to C. macellaria than to C. megacephala and C. putoria under these experimental conditions. The rates of larvae killed as a result of the predation, as well as its implications to population dynamics of introduced and native species are discussed.

Yield and fruit size distribution of processing tomato cultivars

The productivity and fruit size distribution of 28 processing tomato cultivars were analyzed to determine the ones with potential for fresh market. The experiment was done in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), in a Haplorthox soil, from June to December. The cultivars H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511 were evaluated. The experimental design was randomized blocks, with four repetitions, and five plants per experimental unit. Fruits harvested from each experimental unit were counted, classified by transversal diameter (large, medium, small, very small and cull) and then weighed. Cultivars AG 72, H 9498, Hypeel 45, RPT 1095 and Curicó yielded more than 70 fruits per plant, on average. The total production per plant of cultivars AG 72, H 9498, Hypeel 45, H 7155, Hypeel 108, Halley, Hitech, RPT 1095, H 9494, H 9036 and Curicó was greater than 4 kg. Considering the weight of large and medium fruits, categories which are important for fresh market, the cultivars H 2710, Botu 13, U 573, Hypeel 45, Yuba, RPT 1294 and Ipa 6 presented values above 50% for production.

Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Physical-chemical characterization of processing tomato fruit

Fruit of 28 tomato cultivars for industrial processing were characterized to identify cultivars with potential for in natura consumption. The experiment was carried out in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), on a Haplorthox soil during June-December. The cultivars used in this study were: H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511. The experimental design was randomized blocks, replicated four times. Ten fruits per plot were analyzed, evaluating the following characteristics: shape (oblong or round); length and diameter (mm); external and internal coloration; presence of fissures; number of loci; pulp thickness (mm); soluble solids content (Brix) and total acidity. Only cultivars Hypeel 108, AG 72, NK 1570, RPT 1570 had oblong fruit. Cultivars which had pulp thicker than 5.5 mm, a characteristic which is directly related to fruit yield for industrial purposes were: Ipa 6, Andino, U 646, H 9553, RPT 1294 and Hypeel 108. Cultivars Ipa 6 and Andino also presented elevated values for length, diameter and pulp thickness, indicating them as quality material for industry or, alternatively, for in natura market. Among the cultivars which presented better values for acidity (higher or equal to 0.3 g citric acid 100 g-1) were RPT 1095, AG 45, H 9553 and Hypeel 45.

Amphibian secretions for drug discovery studies: A search for new antiparasitic and antifungal compounds

The antiparasitic and antifungal activities of nine amphibian skin secretions were studied in different in vitro models. Seven secretions presented a considerable antiprotozoan activity and one showed promising results against Candida sp. These results can be the basis for the development of new drugs, especially for neglected parasitic diseases. © 2007 Bentham Science Publishers Ltd.

Los años noventa: ¿desarrollo con equidad?

Incluye Bibliografía

Transformación y desarrollo: la gran tarea de América Latina. Volumen 2: trabajos de apoyo

Incluye Bibliografía

Development of a micro heat exchanger made with ceramic multi-layers (LTCC) and its setup to gas flow measurements

A green ceramic tape micro heat exchanger was developed using LTCC technology. The device was designed by using a CAD software and 2D and 3D simulations using a CFD package (COMSOL Multiphysics) to evaluate the fluid behavior in the microchannels. The micro heat exchanger is composed of five thermal exchange plates in cross flow arrangement and two connecting plates; heat exchanger dimensions are 26 × 26 × 6 mm3. Preliminary tests were carried out to characterize the device both in atmospheric pressure and in vacuum. The same techniques used in vacuum technology were applied to check the rotameters and to prevent device leakages. Thermal performance of the micro heat exchanger was experimentally tested. © 2009 Elsevier B.V. All rights reserved.

Estrategia de desarrollo de clusters basados en recursos naturales: el caso de la bauxita en el norte de Brasil

Incluye Bibliografía

Elementos de competitividad sistémica de las pequeñas y medianas empresas (PYME) del Istmo Centroamericano

Incluye Bibliografía

Feeding rate for pacu reared in net cages

The objective of this study was to evaluate the feeding management of pacu juveniles (P. mesopotamicus) under different feeding rates and its relation with productive performance, body composition and hematological characteristics. A total of 300 fish with initial weight of 84.75±4.52 g were distributed in a completely randomized design composed of four treatments (100, 90, 80 and 70% of feed supply) and five repetitions. The amount of feed was stipulated according to the quantity supplied in the treatment until apparent satiation (100%) of the day before. The decrease in the feeding rate to 70% over satiation apparently improves the apparent feed conversion without harming performance, body composition or biochemical and hematological characteristics of pacu juveniles reared in net cages. © 2012 Sociedade Brasileira de Zootecnia.