Thermal Performance of a Solarus CPC-Thermal Collector

The  aim  of  this  master  thesis  is  an  investigation  of  the  thermal  performance  of  a  thermal compound parabolic concentrating (CPC) collector from Solarus. The collector consists of two troughs with absorbers which are coated with different types of paint with  unknown  properties.  The  lower  and  upper  trough  of  the  collector  have  been  tested individually. In  order  to  accomplish  the  performance  of  the  two  collectors,  a  thorough  literature  study  in  the  fields  of  CPC  technology,  various  test  methods,  test  standards  for  solar thermal  collectors  as  well  as  the  latest  articles  relating  on  the  subject  were  carried  out. In addition, the set‐up of the thermal test rig was part of the thesis as well. The thermal  performance  was  tested  according  to  the  steady  state  test  method  as  described in the European standard 12975‐2. Furthermore, the thermal performance of  a  conventional  flat  plate  collector  was  carried  out  for  verification  of  the  test  method. The  CPC‐Thermal  collector  from  Solarus  was  tested  in  2013  and  the  results  showed  four  times  higher  values  of  the  heat  loss  coefficient  UL (8.4  W/m²K)  than  what  has been reported for a commercial collector from Solarus. This value was assumed to be too large and it was assumed that the large value was a result of the test method used that time. Therefore, another aim was the comparison of the results achieved in this work with the results from the tests performed in 2013. The results of the thermal performance showed that the optical efficiency of the lower trough of the CPC‐T collector is 77±5% and the corresponding heat loss coefficient UL 4.84±0.20  W/m²K.  The  upper  trough  achieved  an  optical  efficiency  of  75±6  %  and  a  heat loss coefficient UL of 6.45±0.27 W/m²K. The results of the heat loss coefficients  are  valid  for  temperature  intervals  between  20°C  and  80°C.  The  different  absorber paintings have a significant impact on the results, the lower trough performs overall better.  The  results  achieved  in  this  thesis  show  lower  heat  loss  coefficients UL and higher optical efficiencies compared to the results from 2013. 

Dynamic whole system testing of combined renewable heating systems : the current state of the art

Objective: For the evaluation of the energetic performance of combined renewable heating systems that supply space heat and domestic hot water for single family houses, dynamic behaviour, component interactions, and control of the system play a crucial role and should be included in test methods. Methods: New dynamic whole system test methods were developed based on “hardware in the loop” concepts. Three similar approaches are described and their differences are discussed. The methods were applied for testing solar thermal systems in combination with fossil fuel boilers (heating oil and natural gas), biomass boilers, and/or heat pumps. Results: All three methods were able to show the performance of combined heating systems under transient operating conditions. The methods often detected unexpected behaviour of the tested system that cannot be detected based on steady state performance tests that are usually applied to single components. Conclusion: Further work will be needed to harmonize the different test methods in order to reach comparable results between the different laboratories. Practice implications: A harmonized approach for whole system tests may lead to new test standards and improve the accuracy of performance prediction as well as reduce the need for field tests.

Does Gibrat’s Law hold for Swedish energy firms?

Gibrat's law predicts that firm growth is purely random and should be independent of firm size. We use a random effects-random coefficient model to test whether Gibrat's law holds on average in the studied sample as well as at the individual firm level in the Swedish energy market. No study has yet investigated whether Gibrat's law holds for individual firms, previous studies having instead estimated whether the law holds on average in the samples studied. The present results support the claim that Gibrat's law is more likely to be rejected ex ante when an entire firm population is considered, but more likely to be confirmed ex post after market selection has "cleaned" the original population of firms or when the analysis treats more disaggregated data. From a theoretical perspective, the results are consistent with models based on passive and active learning, indicating a steady state in the firm expansion process and that Gibrat's law is violated in the short term but holds in the long term once firms have reached a steady state. These results indicate that approximately 70 % of firms in the Swedish energy sector are in steady state, with only random fluctuations in size around that level over the 15 studied years.

Inflation and income inequality: a shopping-time aproach: (Forthcoming, Journal of Development Economics)

Our work is based on a simpliÖed heterogenous-agent shoppingtime economy in which economic agents present distinct productivities in the production of the consumption good, and di§erentiated access to transacting assets. The purpose of the model is to investigate whether, by focusing the analysis solely on endogenously determined shopping times, one can generate a positive correlation between ináation and income inequality. Our main result is to show that, provided the productivity of the interest-bearing asset in the transacting technology is high enough, it is true true that a positive link between ináation and income inequality is generated. Our next step is to show, through analysis of the steady-state equations, that our approach can be interpreted as a mirror image of the usual ináation-tax argument for income concentration. An example is o§ered to illustrate the mechanism.

Convergence in Brazil: recent trends and long run prospects

This paper applies to the analysis of the interstate income distribution in BraziI a set of techniques that have been widely used in the current empirical literature on growth and convergence. Usual measures of dispersion in the interstate income distribution (the coefficient of variation and Theil' s index) suggest that cr-convergence was an unequivoca1 feature of the regional growth experience in BraziI, between 1970 and 1986. After 1986, the process of convergence seems, however, to have sIowed down almost to a halt. A standard growth modeI is shown to fit the regional data well and to expIain a substantial amount of the variation in growth rates, providing estimates of the speed of (conditional) J3-convergence of approximateIy 3% p.a .. Different estimates of the long run distribution implied by the recent growth trends point towards further reductions in the interstate income inequality, but also suggest that the relative per capita incomes of a significant number of states and the number of ''very poor" and "poor" states were, in 1995, already quite c10se to their steady-state values.

International integration and long- run persistence of the GNP distribution

We use the Ramsey model of g,Towth elaborated by Bliss [1995] and Ventlira [1997] to show how international integration results in long-nm persistellce Df GNPs distribution, while allowing, under certain conditions on parameters, for convergellce during the transition. First, we pi·ovide relationships which explicitly relate, in the neighborhood of the steady-state, the magnitude of conditional convergence or divergence to the fundamentaIs of the economies. Second, we present ali analysis of the Cobb Douglas case with a broad dass of utility functions and show that there is always transitional convergenee with this technology. Third, directions for testing the Illodel against the traditional dosed-ecollomy setting are proposed. These lead to adding specific and world-wide regTessors to traditional growth regressions.

Optimal monetary policy under administered prices

This work aims to analyze the interaction and the effects of administered prices in the economy, through a DSGE model and the derivation of optimal monetary policies. The model used is a standard New Keynesian DSGE model of a closed economy with two sectors companies. In the first sector, free prices, there is a continuum of firms, and in the second sector of administered prices, there is a single firm. In addition, the model has positive trend inflation in the steady state. The model results suggest that price movements in any sector will impact on both sectors, for two reasons. Firstly, the price dispersion causes productivity to be lower. As the dispersion of prices is a change in the relative price of any sector, relative to general prices in the economy, when a movement in the price of a sector is not followed by another, their relative weights will change, leading to an impact on productivity in both sectors. Second, the path followed by the administered price sector is considered in future inflation expectations, which is used by companies in the free sector to adjust its optimal price. When this path leads to an expectation of higher inflation, the free sector companies will choose a higher mark-up to accommodate this expectation, thus leading to higher inflation trend when there is imperfect competition in the free sector. Finally, the analysis of optimal policies proved inconclusive, certainly indicating that there is influence of the adjustment model of administered prices in the definition of optimal monetary policy, but a quantitative study is needed to define the degree of impact.

O dever constitucional de eficiência administrativa na jurisprudência do Supremo Tribunal Federal

O dever constitucional de eficiência administrativa consiste em norma reitora da atividade regulatória e das demais funções estatais. Este trabalho tem o objetivo de investigar seus sentidos, os tipos de norma em que se classifica e as estruturas argumentativas para a sua aplicação. Entende-se, por sentidos, os critérios usados para se considerar que uma conduta ou medida cumpre ou viola o dever de eficiência, incluindo consideração da relação entre meios para o exercício da atividade administrativa e resultados dessa atividade. Parte-se de diagnóstico de indefinição conceitual, na literatura jurídica brasileira, acerca desse dever constitucional, para investigar a existência de subsídios, na jurisprudência do Supremo Tribunal Federal, que viabilizem elaboração de conceito. Desse modo, verifica-se, na literatura, multiplicidade de definições. Além disso, o aspecto da análise custo-benefício, referido tanto na literatura sobre economicidade quanto nos textos sobre análise econômica do direito, sugere que o assunto também possa ser abordado de modo a correlacioná-lo ao conceito econômico de eficiência de Kaldor-Hicks ou de maximização da riqueza. Na jurisprudência, foi encontrada grande quantidade de sentidos de eficiência, a indicar que o STF pode não ter um posicionamento claro, senão em relação à concepção do dever constitucional de eficiência como um todo, pelo menos em relação a aspectos do conceito, a implicar a necessidade de elaboração, pelo tribunal, casuisticamente, de critérios para considerar que determinada conduta ou medida cumpre ou viola esse dever constitucional. Verificou-se, ainda, a ocorrência de aparentes divergências entre os ministros não apenas com relação à solução concreta de um caso, mas com relação à definição, em um mesmo caso, do sentido do dever de eficiência. Não se pode afirmar, no entanto, com segurança, que a concepção do dever de eficiência em um acórdão seja determinante, no STF, para a orientação dos votos. Ainda assim, um mesmo caso pode ter soluções distintas a depender do sentido de eficiência que se adote. Ademais, os acórdãos que parecem proceder a análise custo-benefício não se parecem referir a conceitos ou a critérios de eficiência econômica para fundamentar essa análise. Esses acórdãos também raramente fazem referência a dados empíricos. Quanto aos tipos de norma às estruturas argumentativas para aplicação, a literatura faz referência a teorias incompatíveis que dificultam compreender de maneira inequívoca como ocorre essa aplicação. O STF, a seu turno, faz uso de pelo menos 3 (três) estruturas argumentativas para aplicar o dever de eficiência: o consequencialismo, a análise custo-benefício e a ponderação de normas. O uso concomitante da análise custo-benefício e da ponderação de normas, contudo, enseja confusão entre o dever de eficiência e a máxima da proporcionalidade. Nesse contexto, a proposta conceitual busca tornar claros os sentidos, os tipos de norma e os modos de aplicação do dever constitucional de eficiência, mediante adoção de referencial teórico único que seja compatível com os achados de jurisprudência. Sendo assim, propõe-se a classificação do dever de eficiência como sobreprincípio e do dever de economicidade como postulado, com referência às concepções teóricas de Humberto Ávila, buscando-se evitar incorrer nos problemas diagnosticados na doutrina e na jurisprudência.

Influência de fatores biopsicossociais sobre a mortalidade de idosos no município de Santa Cruz/RN: um estudo prospectivo

The aging process if characterizes for a complex events network, from multidimensional nature, that encloses biological, social, psychic and functional aspects. The alteration of one or more aspects can speed up the aging process, anticipating limitations and until the death in the aged. For an adjusted confrontation of this question is necessary an interdisciplinary vision, in which the some areas of the knowledge can interact and with this to intervenes of the best possible form. Then, information derived from studies of aspects related to incidence, morbidity-mortality and transition patterns, involved in the health-illness process can more accurately identify risk groups thereby establishing links between social factors, illness, incapacity and death. Thus, this study aimed to identify, by a multidimensional vision, the risk factors of mortality in a coorth of elderly in a city in the interior of the state of Rio Grande do Norte (RN), Brazil. A prospective study carried out in Santa Cruz RN, where 310 elderly were randomly selected to form a baseline. The follow-up was 53 months. The predictive variables were divided into sociodemographic, physical health, neuropsychiatric and functional capacity. The statistical analysis carried out by bivariate analysis, survival analysis, followed by binary logistic regression and Cox regression, in the multivariate analysis, considering significant levels p < 0.05 and confidence interval (CI) of 95%. A total of 60 (19.3%) elderly died during the follow-up, where cardiovascular disease was the main cause. The survival was approximately 24.8 months. The study of general survival showed, at 12, 24, 36, and 48 months of observation, a survival rate of 97%, 54%, 31%, and 5% respectively, with a statistical difference in survival only observed for the variables of cognitive function and Basic Activities of Daily Living. In the logistic regression analysis, the risk factors identified were cognitive deficits (OR = 8.74), poor perception of health (OR = 3.89) and dependence for Basic Activities of Daily Living (OR = 3.96). In the Cox analysis, as well as dependence for Basic Activities of Daily Living (HR = 3.17), cognitive deficit (HR = 4.30) and stroke (CVA) (HR = 3.49) continued as independent risk factors for death. The risk factors found in the study can be interpreted as the primary predictors for death among elderly members of the community. Therefore, improvements in health conditions, with actions towards sustaining an autonomous life with special attention for elderly with cognitive impairment, could mean additional healthy quality of life, resulting in the reduction of premature mortality in this population

Photosynthesis induction in Eucalyptus urograndis seedlings and cuttings measured by Open Photoacoustics

In this work we study the photosynthetic induction in Eucalyptus urograndis leaves using the Open Photoacoustic Cell Technique. In vivo and in situ measurements were performed in leaves of four months-old E. urograndis seedlings and C041 cuttings previously dark-adapted for at least 10 h. Experimental results for the gas exchange component of the photoacoustic (PA) signal are interpreted considering that a gas uptake component would have a phase angle nearly opposite to that of the oxygen evolution component. Analysis of the photosynthetic induction data shows that seedlings present a net oxygen evolution before cuttings, but cuttings reach a higher steady-state photosynthetic activity.

A questão do petróleo em terras indígenas: uma análise constitucional à luz do desenvolvimento sustentável

Recognizing the need to preserve a national ethnic minority, the Constitution, inspired by the pluralistic values of the Constitutional Law State, stipulated a series of rights and guarantees for the conservation of indigenous cultural singularity, disciplining in article 231 the Indians right to maintain their social organization, customs, languages, beliefs and traditions, as well as safeguarding the rights to the lands they traditionally occupy, and the exclusive use of the wealth existing in them, premise of ensuring their physical and cultural continuity, breaking decisively with the paradigm the assimilation of the Indian national civilization. However, despite the Indian policy of ethnic and cultural preservation, the Constitution allowed the exploitation of minerals in aboriginal territory, incorporated herein hydrocarbons, provided they meet certain predetermined requirements, leaving it to the legislature the discipline of ordinary matter. However, this law has not yet been published, with some projects in the National Congress, leaving thus precluding the indigenous subsurface oil exploration until the enactment of enabling legislation. Meanwhile, this paper carries out an integrated analysis of the constitutional protection of ethnic and cultural uniqueness of indigenous peoples, Convention Nº 169 of the International Labour Organization and the bill presented by Deputy Eduardo Valverde, in an attempt to consolidate sustainable development practices in the sector, through developing a system of social and environmental responsible oil exploration, aligning with national energy needs to maintain a balanced environment and preservation of socio-cultural organization of a minority so weakened and beaten over five centuries of domination

Geração de renda e ocupações na cadeia agroindustrial de castanha de caju no Rio Grande do Norte: o caso do sertão de Apodi

This work is part of the research group studying agribusiness chains, by characterizing agroindustrial chain of cashew nuts in Rio Grande do Norte, with special emphasis on Sertão de Apodi Citizenship Territory, showing their different flows and linkages and analyzes generating jobs and income in the production of this good, from the experience of COOPAPI, using as a methodology for analyzing the input-output matrix. And this is justified by the fact that Brazil is in the context as the world's fifth largest producer of cashew nuts and the production of this product focus in the Northeast, especially the Rio Grande do Norte, which is the second largest producer of region, behind only the state of Ceará, which is the largest producer in the country. Moreover, in recent years the state has increased its insertion in international markets this product, particularly the Mossoró-Assu Territory, which constitutes the largest producer in the state, particularly the municipality of Serra do Mel, which has an arrangement different yield, based on the model of integrated rural development, embodied in family farming. Nevertheless, the Sertão de Apodi Citizenship appear as the fourth among the Citizenship territories of Rio Grande do Norte in the ranking of the production of cashew nuts, but the prevailing model of Cooperatives in the Territory, based on the Solidarity Economy, i,e, different from the old cooperative, which is based on the precepts as patronage, with cooperative owners, favor, etc.., encourages scientific research. In this, after a careful analysis of data from field research, it was noticed that among the links in the chain, the production link is what generates the most jobs, while the processing link commands to generate income, but a portion meaningful occupations and income are generated outside the territory, especially out of state RN, denouncing the gap in supply of some specific demands within the chain

Desenvolvimento de um modelo de gestão do conhecimento para a melhoria do processo de desenvolvimento de produtos

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Estudo de estratégias de otimização para poços de petróleo com elevação por bombeio de cavidades progressivas

The progressing cavity pump artificial lift system, PCP, is a main lift system used in oil production industry. As this artificial lift application grows the knowledge of it s dynamics behavior, the application of automatic control and the developing of equipment selection design specialist systems are more useful. This work presents tools for dynamic analysis, control technics and a specialist system for selecting lift equipments for this artificial lift technology. The PCP artificial lift system consists of a progressing cavity pump installed downhole in the production tubing edge. The pump consists of two parts, a stator and a rotor, and is set in motion by the rotation of the rotor transmitted through a rod string installed in the tubing. The surface equipment generates and transmits the rotation to the rod string. First, is presented the developing of a complete mathematical dynamic model of PCP system. This model is simplified for use in several conditions, including steady state for sizing PCP equipments, like pump, rod string and drive head. This model is used to implement a computer simulator able to help in system analysis and to operates as a well with a controller and allows testing and developing of control algorithms. The next developing applies control technics to PCP system to optimize pumping velocity to achieve productivity and durability of downhole components. The mathematical model is linearized to apply conventional control technics including observability and controllability of the system and develop design rules for PI controller. Stability conditions are stated for operation point of the system. A fuzzy rule-based control system are developed from a PI controller using a inference machine based on Mandami operators. The fuzzy logic is applied to develop a specialist system that selects PCP equipments too. The developed technics to simulate and the linearized model was used in an actual well where a control system is installed. This control system consists of a pump intake pressure sensor, an industrial controller and a variable speed drive. The PI control was applied and fuzzy controller was applied to optimize simulated and actual well operation and the results was compared. The simulated and actual open loop response was compared to validate simulation. A case study was accomplished to validate equipment selection specialist system