Sea-surface reconstructions of the western Pacific Ocean during the last 5.3 million years

The late Neogene was a time of cryosphere development in the northern hemisphere. The present study was carried out to estimate the sea surface temperature (SST) change during this period based on the quantitative planktonic foraminiferal data of 8 DSDP sites in the western Pacific. Target factor analysis has been applied to the conventional transfer function approach to overcome the no-analog conditions caused by evolutionary faunal changes. By applying this technique through a combination of time-slice and time-series studies, the SST history of the last 5.3 Ma has been reconstructed for the low latitude western Pacific. Although the present data set is close to the statistical limits of factor analysis, the clear presence of sensible variations in individual SST time-series suggests the feasibility and reliability of this method in paleoceanographic studies. The estimated SST curves display the general trend of the temperature fluctuations and reveal three major cool periods in the late Neogene, i.e. the early Pliocene (4.7 3.5 Ma), the late Pliocene (3.1-2.7 Ma), and the latest Pliocene to early Pleistocene (2.2-1.0 Ma). Cool events are reflected in the increase of seasonality and meridional SST gradient in the subtropical area. The latest Pliocene to early Pleistocene cooling is most important in the late Neogene climatic evolution. It differs from the previous cool events in its irreversible, steplike change in SST, which established the glacial climate characteristic of the late Pleistocene. The winter and summer SST decreased by 3.3-5.4°C and 1.0 2.1C in the subtropics, by 0.9°C and 0.6C in the equatorial region, and showed little or no cooling in the tropics. Moreover, this cooling event occurred as a gradual SST decrease during 2.2 1.0 Ma at the warmer subtropical sites, while that at cooler subtropical site was an abrupt SST drop at 2.2 Ma. In contrast, equatorial and tropical western Pacific experienced only minor SST change in the entire late Neogene. In general, subtropics was much more sensitive to climatic forcing than tropics and the cooling events were most extensive in the cooler subtropics. The early Pliocene cool periods can be correlated to the Antarctic ice volume fluctuation, and the latest Pliocene early Pleistocene cooling reflects the climatic evolution during the cryosphere development of the northern hemisphere.

The Hall-Findlay mammaplasty pattern for skin-sparing mastectomy. Case report

We present an application of the Hall-Findlay mammaplasty skin pattern for skin-sparing mastectomy (SSM). This is a simplified vertical reduction mammaplasty. Vertical reduction mammaplasty is the procedure advised for patients with moderator or large ptotic breasts, who wish to have a simultaneous contra-lateral breast reduction/mastopexy at the time of SSM for cancer or prophylactic mastectomy. It is particularly suitable for breast reconstruction with autologous tissue in the form of free transverse rectus abdominis myocutaneous (TRAM), deep inferior epigastric artery perforator (DIEP) and extended latissimus dorsi (ELD) flaps.

Food and fuel microalgae applications: insights from portuguese experience [Resumo]

Microalgae have a wide range of application fields, from food to fuels, to pharmaceuticals & fine chemicals, aquaculture and environmental bioremediation, among others. Spirulina and Chlorella have been used as food sources since ancient times, due to their high and balanced nutritional value. Our research group in Lisbon has developed a range of food products (emulsions, gelled desserts, biscuits and pastas) enriched with freshwater and marine microalgae (Spirulina, Chlorella, Haematococcus, Isochrysis and Diacronema). The developed products presented attractive and stable colours, high resistance to oxidation and enhanced rheological properties. Some of these products will be prepared at the Post-Congress Course “Functional Foods Development” at the University of Antofagasta. More recently, a great interest has arisen on using microalgae for biofuel production. The same group has also been exploring several marine and freshwater species for biofuel production (e.g., biodiesel, bioethanol, biohydrogen and biomethane) within a biorefinery approach, in order to obtain high and low-value co-products using integral biomass maximizing the energy revenue. Namely, supercritical fluid extraction of Nannochloropsis sp. allowed the recovery of valuable carotenoids and lipids, prior to bioH2 production through dark fermentation of the residual biomass. Also, Scenedesmus obliquus residues after sugars (for bioethanol) and lipids (for biodiesel) extraction has been anaerobically digested attaining high biomethane yields. Regarding sustainability issues, the current trend of our group is now focused on using liquid effluents and high CO2 levels for low cost microalgae growth, contributing to a lower water demand, primary energy consumption and global warming potential by reducing the need for potable water and fertilizers (P, N) and increasing CO2 mitigation. Microalgae biomass has been successfully used for urban wastewater treatment with subsequent bioH2 production, in a biorefinery approach. Presently, ammonium-rich raw effluents from piggeries and poultry industry are being effectively used for microalgae growth avoiding any pre-treatment step.

Produção e extração da enzima anidrase carbônica e de ficobiliproteínas a partir de microalgas

Muito interesse tem sido focado no potencial biotecnológico das microalgas, principalmente devido à identificação de diversas substâncias sintetizadas por estes organismos, dentre elas a anidrase carbônica e as ficobiliproteínas. A anidrase carbônica é uma metaloenzima que catalisa a hidratação reversível do CO2 em bicarbonato com alta eficiência, sendo utilizada para captação de CO2 através de sistemas biológicos. A C-ficocianina e a aloficocianina, corantes naturais, são os dois principais componentes das ficobiliproteínas em cianobactérias e apresentam diversas aplicações dentro da indústria alimentícia, cosmética e farmacêutica. O objetivo principal desta tese foi avaliar a produção e a extração da anidrase carbônica e das ficobiliproteínas a partir de diferentes microalgas. Para isso, primeiramente foi realizado uma investigação da produção da anidrase carbônica pela microalga Dunaliella tertiolecta, onde foi estudada a extração da enzima e sua aplicação em sistemas de captura enzimática de CO2. Posteriormente foi avaliada a produção da enzima ao longo do cultivo de diferentes microalgas marinhas e dulcícolas (Dunaliella tertiolecta, Tetraselmis sueccica, Phaeodactylum tricornutum, Nannochloropsis oculata, Isochysis galbana, Chlorella vulgaris e Scenedesmus obliquus). A produção da enzima e de ficobiliproteínas, também, foi estudada para as cianobactérias Spirulina platensis LEB 52, Spirulina sp. LEB 18 e Synechococcus nidulans. Todos os cultivos foram acompanhados em termos de biomassa e pH. Por último, foi realizado um estudo de extração da enzima de P. tricornutum e extração conjunta da anidrase carbônica e de ficobiliproteínas da cianobactéria S. sp. LEB 18. Os cultivos foram realizados em frascos erlenmeyer contendo os meios Conway (marinhas), BG-11 (dulcícolas) e Zarrouk 20% (cianobactérias). Na avaliação da ruptura celular foram testadas as técnicas de maceração em gral e pistilo, agitação em vórtex com pérolas de vidro, sonicação com pérolas de vidro, homogeneizador ultrassônico, secagem, congelamento e descongelamento e a combinação de tratamentos. Maiores rendimentos de extração da enzima a partir da microalga D. tertiolecta foram obtidos utilizando tratamento ultrassônico, juntamente com baixas concentrações de biomassa úmida (0,1 e 0,2 g/L), e a mesma apresentou potencial para aplicação em processos de captação enzimática do CO2. Durante os cultivos, a microalga C. vulgaris se destacou como maior produtora da enzima anidrase carbônica, atingindo valores de atividade enzimática de 44,0 U/L. As cianobactérias apresentaram valores de atividade entre 41,6 e 45,9 U/L, sendo que a S. sp. LEB 18 foi a que apresentou maiores produções de C-ficocianina e aloficocianina no ponto de máxima atividade volumétrica, 65,9 e 82,2 µg/mL, respectivamente. A enzima extraída da biomassa de S. platensis LEB 52 catalisou a hidratação do CO2 que precipitou na forma de CaCO3. Maiores rendimentos de extração da enzima a partir das microalgas P. tricornutum e S. sp. LEB 18 foram obtidos utilizando homogeneizador ultrassônico, que foram 31,3 U/g e 25,5 U/g, respectivamente. A biomassa de S. sp. LEB 18, também apresentou potencial para a extração de ficobiliproteínas, obtendo- se altas concentrações de C-ficocianina (100,5 mg/g) e aloficocianina (69,9 mg/g). Através dos resultados obtidos, pode-se verificar a potencialidade das microalgas e das cianobactérias para produção da enzima anidrase carbônica e das ficobiliproteínas, biomoléculas de alto valor industrial. Este trabalho apresenta processos eficientes para a extração da enzima e de ficobiliproteínas tanto para escala laboratorial como industrial.

Production de biodiesel à partir de microalgues par catalyses homogène et hétérogène

Résumé : Au Canada, près de 80% des émissions totales, soit 692 Mt eq. CO[indice inférieur 2], des gaz à effet de serre (GES) sont produits par les émissions de dioxyde de carbone (CO[indice inférieur 2]) provenant de l’utilisation de matières fossiles non renouvelables. Après la Conférence des Nations Unies sur les changements climatiques, COP21 (Paris, France), plusieurs pays ont pour objectif de réduire leurs émissions de GES. Dans cette optique, les microalgues pourraient être utilisées pour capter le CO[indice inférieur 2] industriel et le transformer en biomasse composée principalement de lipides, de glucides et de protéines. De plus, la culture des microalgues n’utilise pas de terre arable contrairement à plusieurs plantes oléagineuses destinées à la production de biocarburants. Bien que les microalgues puissent être transformées en plusieurs biocarburants tels le bioéthanol (notamment par fermentation des glucides) ou le biométhane (par digestion anaérobie), la transformation des lipides en biodiesel pourrait permettre de réduire la consommation de diesel produit à partir de pétrole. Cependant, les coûts reliés à la production de biodiesel à partir de microalgues demeurent élevés pour une commercialisation à court terme en partie parce que les microalgues sont cultivées en phase aqueuse contrairement à plusieurs plantes oléagineuses, ce qui augmente le coût de récolte de la biomasse et de l’extraction des lipides. Malgré le fait que plusieurs techniques de récupération des lipides des microalgues n’utilisant pas de solvant organique sont mentionnées dans la littérature scientifique, la plupart des méthodes testées en laboratoire utilisent généralement des solvants organiques. Les lipides extraits peuvent être transestérifiés en biodiesel en présence d’un alcool tel que le méthanol et d’un catalyseur (catalyses homogène ou hétérogène). Pour la commercialisation du biodiesel à partir de microalgues, le respect des normes ASTM en vigueur est un point essentiel. Lors des essais en laboratoire, il a été démontré que l’extraction des lipides en phase aqueuse était possible afin d’obtenir un rendement maximal en lipides de 36% (m/m, base sèche) en utilisant un prétraitement consistant en une ébullition de la phase aqueuse contenant les microalgues et une extraction par des solvants organiques. Pour l’estérification, en utilisant une résine échangeuse de cations (Amberlyst-15), une conversion des acides gras libres de 84% a été obtenue à partir des lipides de la microalgue Chlorella protothecoïdes dans les conditions suivantes : température : 120°C, pression autogène, temps de réaction : 60 min, ratio méthanol/lipides: 0.57 mL/g et 2.5% (m/m) Amberlyst-15 par rapport aux lipides. En utilisant ces conditions avec une catalyse homogène (acide sulfurique) et une seconde étape alcaline avec de l’hydroxyde de potassium (température : 60°C ; temps de réaction : 22.2 min; ratio catalyseur microalgue : 2.48% (m/m); ratio méthanol par rapport aux lipides des microalgues : 31.4%), un rendement en esters méthyliques d’acides gras (EMAG) de 33% (g EMAG/g lipides) a été obtenu à partir des lipides de la microalgue Scenedesmus Obliquus. Les résultats démontrent que du biodiesel peut être produit à partir de microalgues. Cependant, basé sur les présents résultats, il sera necessaire de mener d’autre recherche pour prouver que les microalgues sont une matière première d’avenir pour la production de biodiesel.