Production and characterization of Chitin-Glucan Complex by Komagataella pastoris

This thesis was focused on the production, extraction and characterization of chitin:β-glucan complex (CGC). In this process, glycerol byproduct from the biodiesel industry was used as carbon source. The selected CGC producing yeast was Komagataella pastoris (formerly known as Pichia pastoris), due the fact that to achieved high cell densities using as carbon source glycerol from the biodiesel industry. Firstly, a screening of K. pastoris strains was performed in shake flask assays, in order to select the strain of K. pastoris with better performance, in terms of growth, using glycerol as a carbon source. K. pastoris strain DSM 70877 achieved higher final cell densities (92-97 g/l), using pure glycerol (99%, w/v) and in glycerol from the biodiesel industry (86%, w/v), respectively, compared to DSM 70382 strain (74-82 g/l). Based on these shake flask assays results, the wild type DSM 70877 strain was selected to proceed for cultivation in a 2 l bioreactor, using glycerol byproduct (40 g/l), as sole carbon source. Biomass production by K. pastoris was performed under controlled temperature and pH (30.0 ºC and 5.0, respectively). More than 100 g/l biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g/g during the batch phase and 0.63 g/g during the fed-batch phase. In order to optimize the downstream process, by increasing extraction and purification efficiency of CGC from K. pastoris biomass, several assays were performed. It was found that extraction with 5 M NaOH at 65 ºC, during 2 hours, associated to neutralization with HCl, followed by successive washing steps with deionised water until conductivity of ≤20μS/cm, increased CGC purity. The obtained copolymer, CGCpure, had a chitin:glucan molar ratio of 25:75 mol% close to commercial CGC samples extracted from A. niger mycelium, kiOsmetine from Kitozyme (30:70 mol%). CGCpure was characterized by solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and Differential Scanning Calorimetry (DCS), revealing a CGC with higher purity than a CGC commercial (kiOsmetine). In order to optimize CGC production, a set of batch cultivation experiments was performed to evaluate the effect of pH (3.5–6.5) and temperature (20–40 ºC) on the specific cell growth rate, CGC production and polymer composition. Statistical tools (response surface methodology and central composite design) were used. The CGC content in the biomass and the volumetric productivity (rp) were not significantly affected within the tested pH and temperature ranges. In contrast, the effect of pH and temperature on the CGC molar ratio was more pronounced. The highest chitin: β-glucan molar ratio (> 14:86) was obtained for the mid-range pH (4.5-5.8) and temperatures (26–33 ºC). The ability of K. pastoris to synthesize CGC with different molar ratios as a function of pH and temperature is a feature that can be exploited to obtain tailored polymer compositions.(...)

Dental and facial characteristics of patients with juvenile idiopathic arthritis

OBJECTIVE: It has been shown that the temporomandibular joint is frequently affected by juvenile idiopathic arthritis, and this degenerative disease, which may occur during facial growth, results in severe mandibular dysfunction. However, there are no studies that correlate oral health (tooth decay and gingival diseases) and temporomandibular joint dysfunction in patients with juvenile idiopathic arthritis. The aim of this study is to evaluate the oral and facial characteristics of the patients with juvenile idiopathic arthritis treated in a large teaching hospital. METHOD: Thirty-six patients with juvenile idiopathic arthritis (26 female and 10 male) underwent a systematic clinical evaluation of their dental, oral, and facial structures (DMFT index, plaque and gingival bleeding index, dental relationship, facial profile, and Helkimo's index). The control group was composed of 13 healthy children. RESULTS: The mean age of the patients with juvenile idiopathic arthritis was 10.8 years; convex facial profile was present in 12 juvenile idiopathic arthritis patients, and class II molar relation was present in 12 (P = .032). The indexes of plaque and gingival bleeding were significant in juvenile idiopathic arthritis patients with a higher number of superior limbs joints involved (P = .055). Anterior open bite (5) and temporomandibular joint noise (8) were present in the juvenile idiopathic arthritis group. Of the group in this sample, 94% (P = .017) had temporomandibular joint dysfunction, 80% had decreased mandibular opening (P = 0.0002), and mandibular mobility was severely impaired in 33% (P = .015). CONCLUSION: This study confirms that patients with juvenile idiopathic arthritis a) have a high incidence of mandibular dysfunction that can be attributed to the direct effect of the disease in the temporomandibular joint and b) have a higher incidence of gingival disease that can be considered a secondary effect of juvenile idiopathic arthritis on oral health.

Fatigue life assessment of endodontic instruments subjected to multi planar curvature

This present study aimed to investigate the fatigue life of unused (new) endodontic instruments made of NiTi with control memory by Coltene™ and subjected to the multi curvature of a mandibular first molar root canal. Additionally, the instrument‟s structural behaviour was analysed through non-linear finite element analysis (FEA). The fatigue life of twelve Hyflex™ CM files was assessed while were forced to adopt a stance with multiple radius of curvature, similar to the ones usually found in a mandibular first molar root canal; nine of them were subjected to Pecking motion, a relative movement of axial type. To achieve this, it was designed an experimental setup with the aim of timing the instruments until fracture while worked inside a stainless steel mandibular first molar model with relative axial motion to simulate the pecking motion. Additionally, the model‟s root canal multi-curvature was confirmed by radiography. The non-linear finite element analysis was conducted using the computer aided design software package SolidWorks™ Simulation, in order to define the imposed displacement required by the FEA, it was necessary to model an endodontic instrument with simplified geometry using SolidWorks™ and subsequently analyse the geometry of the root canal CAD model. The experimental results shown that the instruments subjected to pecking motion displayed higher fatigue life values and higher lengths of fractured tips than those with only rotational relative movement. The finite element non-linear analyses shown, for identical conditions, maximum values for the first principal stress lower than the yield strength of the material and those were located in similar positions to the instrument‟s fracture location determined by the experimental testing results.

Estudo da partição de fitase produzida por Aspergillus niger var. phoenicis utilizando bioconversão extrativa em sistemas de duas fases aquosas PEG/citrato

Existem diversos métodos tradicionais que são utilizados para extratir biomoléculas produzidas por fermentação convencional. Um método alternativo é o sistema de duas fases aquosas, o qual foi desenvolvido para a extração de bioprodutos. A bioconversão extrativa trata-se de um sistema de duas fases aquosas que integra cultivo microbiológico à produção e recuperação do bioproduto. Fitases são fosfatases específicas que estão envolvidas na catálise do ácido fitico. O objetivo deste trabalho foi estudar a partição da fitase produzida por A. niger var. phoenicis por bioconversão extrativa utilizando PEG/citrato. Realizou-se um planejamento fatorial completo 25, estudando as seguintes variáveis: massa molar do PEG, concentração do PEG, concentração de citrato, pH e agitação, onde obteve-se como variável-resposta o coeficiente de partição em atividade (KATIV). Neste trabalho conseguiu-se um coeficiente de partição de 25,77 utilizando MPEG (8000 g/mol), CPEG, (26,0% m/m), CCIT (20,0% m/m), pH (6,0) e agitação (100 rpm). Através dos resultados obtivos, pode-se concluir que a fitase utilizada no presente estudo apresenta uma tendência de particionar para a fase superior do sistema (K>1). A técnica de fermentação extrativa utilizando SDFA PEG/citrato demonstrou ser promissora para extração de fitase produzida por A. niger var. phoenicis, podendo ser aplicada na composição de rações comerciais.

Cationic Liposomes as antigenic delivery systems: development of an immunoprotective strategy against Candida albicans

Tese de Doutoramento Biologia Molecular e Ambiental - Especialidade em Biologia Celular e Saúde

Aproveitamento do Óleo das Amêndoas de Tucumã do Amazonas na Produção de Biodiesel

A falta de disponibilidade de energia elétrica é um dos principais motivos pelo baixo Índice de Desenvolvimento Humano das comunidades isoladas localizadas na Amazônia. O biodiesel produzido a partir de óleos vegetais extraídos de espécies oleaginosas nativas de forma sustentada é uma das melhores alternativas energéticas para a região. O tucumã do amazonas, Astrocaryum aculeatum, é uma espécie de palmeira que produz um fruto muito apreciado na região, a partir do qual se obtém uma amêndoa com alto teor de óleo. Nesse estudo, foi avaliada a produção de biodiesel etílico, a partir de diferentes lotes de óleos de tucumã do amazonas, com índices de acidez baixos e elevados, pela transesterificação por catálise básica e ácida homogêneas, respectivamente. Na catálise ácida, foram testados HCl e H2SO4 como catalisadores nas concentrações de 0,0625 a 1,000 M, empregando etanol hidratado na proporção molar de 1:6 e a reação conduzida a 90 ºC por 24 h. Na catálise básica, foram testados NaOH e KOH, nas proporções de 0,5 a 2,0 %, empregando etanol anidro na proporção molar de 1:12 e a reação conduzida a 80 ºC por 2 h. O biodiesel obtido em cada experimento foi analisado por métodos físicos (massa específica) e cromatográficos (CLAE em fase reversa). Análises cromatográficas indicaram que as melhores conversões foram alcançadas por amostras de biodiesel com massas específicas inferiores a 0,87 g.cm-1. As amostras de biodiesel obtidas com melhor qualidade foram obtidas utilizando-se os catalisadores ácidos a 1,0 M com rendimentos superiores a 90%. No caso da catálise básica, obteve-se biodiesel de boa qualidade empregando-se o catalisador NaOH a 2,0%, porém com rendimento inferior a 60 %. Contudo, em ambos os casos, foi possível identificar um excelente potencial de produção de biocombustível, a partir do óleo das amêndoas de tucumã.

Otimização do perfil farmacocinético e farmacodinâmico de fármacos anticancerígenos através da sua veiculação em nanossistemas lipídicos

Dissertação de mestrado em Biofísica e Bionanossistemas

Libertação fotocontrolada de moléculas bioativas a partir de conjugados de cumarinas

Dissertação de mestrado em Química Medicinal

Design of bio-based supramolecular structures through self-assembly of α-lactalbumin and lysozyme

Bovine α-lactalbumin (α-La) and lysozyme (Lys), two globular proteins with highly homologous tertiary structures and opposite isoelectric points, were used to produce bio-based supramolecular structures under various pH values (3, 7 and 11), temperatures (25, 50 and 75 °C) and times (15, 25 and 35 min) of heating. Isothermal titration calorimetry experiments showed protein interactions and demonstrated that structures were obtained from the mixture of α-La/Lys in molar ratio of 0.546. Structures were characterized in terms of morphology by transmission electron microscopy (TEM) and dynamic light scattering (DLS), conformational structure by circular dichroism and intrinsic fluorescence spectroscopy and stability by DLS. Results have shown that protein conformational structure and intermolecular interactions are controlled by the physicochemical conditions applied. The increase of heating temperature led to a significant decrease in size and polydispersity (PDI) of α-La–Lys supramolecular structures, while the increase of heating time, particularly at temperatures above 50 °C, promoted a significant increase in size and PDI. At pH 7 supramolecular structures were obtained at microscale – confirmed by optical microscopy – displaying also a high PDI (i.e. > 0.4). The minimum size and PDI (61 ± 2.3 nm and 0.14 ± 0.03, respectively) were produced at pH 11 for a heating treatment of 75 °C for 15 min, thus suggesting that these conditions could be considered as critical for supramolecular structure formation. Its size and morphology were confirmed by TEM showing a well-defined spherical form. Structures at these conditions showed to be stable at least for 30 or 90 days, when stored at 25 or 4 °C, respectively. Hence, α-La–Lys supramolecular structures showed properties that indicate that they are a promising delivery system for food and pharmaceutical applications.

Fundamental studies on natural deep eutectic solvents: physico-chemical, thermal and rheological properties

When combined at particular molar fractions, sugars, aminoacids or organic acids a present a high melting point depression, becoming liquids at room temperature. These are called Natural Deep Eutectic Solvents – NADES and are envisaged to play a major role on the chemical engineering processes of the future. Nonetheless, there is a significant lack of knowledge of its fundamental and basic properties, which is hindering their industrial applications. For this reason it is important to extend the knowledge on these systems, boosting their application development [1]. In this work, we have developed and characterized NADES based on choline chloride, organic acids, amino acids and sugars. Their density, thermal behavior, conductivity and polarity were assessed for different compositions. The conductivity was measured from 0 to 40 °C and the temperature effect was well described by the Vogel-Fulcher-Tammann equation. The morphological characterization of the crystallizable materials was done by polarized optical microscopy that provided also evidence of homogeneity/phase separation. Additionally, the rheological and thermodynamic properties of the NADES and the effect of water content were also studied. The results show these systems have Newtonian behavior and present significant viscosity decrease with temperature and water content, due to increase on the molecular mobility. The anhydrous systems present viscosities that range from higher than 1000Pa.s at 20°C to less than 1Pa.s at 70°C. DSC characterization confirms that for water content as high as 1:1:1 molar ratio, the mixture retains its single phase behavior. The results obtained demonstrate that the NADES properties can be finely tunned by careful selection of its constituents. NADES present the necessary properties for use as extraction solvents. They can be prepared from inexpensive raw materials and tailored for the selective extraction of target molecules. The data produced in this work is hereafter importance for the selection of the most promising candidates avoiding a time consuming and expensive trial and error phase providing also data for the development of models able to predict their properties and the mechanisms that allow the formation of the deep eutectic mixtures.

Development of Monoolein-based lipofection vectors for therapeutic siRNA delivery

Tese de Doutoramento em Biologia Molecular e Ambiental - Especialidade em Biologia Celular e Saúde

The role of IFNγ in higher brain function: in health and under chronic stress

Tese de Doutoramento em Ciências da Saúde

A design of experiments to assess phosphorous removal and crystal properties in struvite precipitation of source separated urine using different Mg sources

Supplementary data associated with this article can be found, in the online version, at: http://dx.doi.org/10.1016/j.cej.2016.03.148.

Development of nanohydrogels as a vehicle for the release of bioactive compounds in food matrices

PhD in Chemical and Biological Engineering

"O pH de soluções de ácido acético, cítrico, oxálico e tartárico"

O presente trabalho descreve os dados obtidos sôbre a determinação do pH em soluções, desde 0,005 até 0,50 molar de ácido acético, ácido cítrico, ácido oxálico e ácido tartárico. Os dados obtidos experimentalmente, quando expressos em função de pC, isto é, em função de log log 1/C apresentaram uma relação linear. Por outro lado, calculando-se o pH das diversas soluções dos ácidos estudados, através de duas equações, uma do primeiro grau e outra do segundo grau, observou-se que os resultados calculados pela segunda equação apresentaram valores muito próximos aos determinados experimentalmente, conquanto no cálculo tenha sido usada apenas, a primeira constante termodinâmica de ionização, para os ácido cítrico, oxálico e tartárico. Uma vez que o valor do pH determinado e o do pH calculado constituem uma função linear do pC, foram estabelecidas duas equações de regressão para cada ácido estudado. Na primeira equação de regressão o pH determinado figura como variável dependente e na segunda, o pH calculado é a variável dependente. Nas duas equações o pC é a variável independente.