Recent advances in the preparation and utilization of carbon nanotubes for hydrogen storage

Recent progress in the production, purification, and experimental and theoretical investigations of carbon nanotubes for hydrogen storage are reviewed. From the industrial point of view, the chemical vapor deposition process has shown advantages over laser ablation and electric-arc-discharge methods. The ultimate goal in nanotube synthesis should be to gain control over geometrical aspects of nanotubes, such as location and orientation, and the atomic structure of nanotubes, including helicity and diameter. There is currently no effective and simple purification procedure that fulfills all requirements for processing carbon nanotubes. Purification is still the bottleneck for technical applications, especially where large amounts of material are required. Although the alkali-metal-doped carbon nanotubes showed high H-2 Weight uptake, further investigations indicated that some of this uptake was due to water rather than hydrogen. This discovery indicates a potential source of error in evaluation of the storage capacity of doped carbon nanotubes. Nevertheless, currently available single-wall nanotubes yield a hydrogen uptake value near 4 wt% under moderate pressure and room temperature. A further 50% increase is needed to meet U.S. Department of Energy targets for commercial exploitation. Meeting this target will require combining experimental and theoretical efforts to achieve a full understanding of the adsorption process, so that the uptake can be rationally optimized to commercially attractive levels. Large-scale production and purification of carbon nanotubes and remarkable improvement of H-2 storage capacity in carbon nanotubes represent significant technological and theoretical challenges in the years to come.

Efeitos da depleção de nitrogênio sobre a biomassa e produção lipídica lipídica de três espécies de microalgas fitoplânticas

O uso de lipídios obtidos a partir da biomassa de microalgas tem sido descrito como uma alternativa promissora para a indústria petro-diesel e envolve etapas como o cultivo de microalgas, separação da biomassa e extração de lipídios. Para viabilizar a produção em larga escala, é necessário selecionar as espécies mais produtivas, diminuir os custos de produção e determinar as condições ideais de cultivo. Os gêneros Chlorella, Desmodesmus e Ankistrodesmus apresentam características favoráveis à produção comercial, tendo sido então selecionada uma espécie de cada no presente trabalho. O objetivo do estudo foi avaliar diferentes condições de cultivo de Ankistrodesmus fusiformis, Chlorella vulgaris e Desmodesmus spinosus visando o aumento da produtividade em biomassa e lipídios totais. As algas foram identificadas e cultivadas em laboratório, em condições controladas de temperatura a 26ºC (±1), aeração por borbulhamento à pressão ambiente e luminosidade fornecida por lâmpadas fluorescentes, com intensidade de 47,25 μmol de fótons m-2.s-1 (3500 lux), fotoperiodo de 12h e pH 7, sob duas concentrações estressantes de nitrato de sódio (0,10 g/L e 0,05g/L). Os cultivos duraram em média 16 dias, sendo as curvas de crescimento construídas com dados de espectrofotometria óptica coletados a cada 48h, e a biomassa obtida ao final do cultivo por centrifugação e liofilização de cada unidade experimental. Para extração dos lipídios totais, foi utilizada a mistura de clorofórmio: metanol (1:2), segundo a metodologia de Bligh & Dyer (1959). Os tratamentos de estresse em D.spinosus resultaram em maior acúmulo lipídico, com aumento de até 149,7%, porém com drástica diminuição do crescimento e biomassa. Em C. vulgaris, nos tratamentos de estresse, verificou-se apenas ligeiro aumento do peso seco e teor de lipídios, não havendo diferença significativa entre os tratamentos e o controle. Da mesma forma, A.fusiformis não mostrou respostas significativas ao estresse pela redução de nitrato de sódio do meio, havendo ligeira diminuição do conteúdo lipídico e aumento do crescimento e biomassa. Com respostas diferentes para cada espécie estudada, evidencia-se a necessidade do conhecimento da fisiologia e autoecologia da cepa a ser cultivada em escala comercial visando à produção de ácidos graxos para fins de biodiesel.

Cultivo in vitro de Crambe abyssinica Hochst. : germinação, micropropagação, estabilidade genética e anatomia foliar

Crambe (Crambe abyssinica) pertence à família Brassicaceae, originário da Etiópia e principalmente destinado à produção de forragem (30 a 32% de proteína bruta). Atualmente, tem sido bastante cultivado visando à extração de óleo vegetal. Com os atuais incentivos à busca de fontes de energias renováveis, o cultivo de crambe vem ganhando papel de destaque na produção de biodiesel por suas diversas vantagens, como: (a) rápido ciclo de vida (colhida em torno de 90 dias); (b) alta produção de biomassa; (c) alta produtividade de sementes (1000 e 1500 kg ha-1); (d) menor custo de produção em relação a outras fontes oleaginosas, como, canola, girassol e soja; (e) um percentual de óleo total na semente entre 32 e 38%, superando, por exemplo, a soja; (f) potencial de fitorremediação, eficiente na descontaminação de arsênio, cromo e outros metais pesados; e (g) elevado percentual de ácido erúcico (50 a 60%) sendo útil na indústria de plástico e lubrificante. Devido aos poucos trabalhos realizados com crambe, abre-se um vasto campo de investigações científicas que tenham como objetivo desenvolver as potencialidades dessa cultura e, consequentemente, melhorar os aspectos agronômicos e tecnológicos para seu emprego na indústria de biodiesel. Nesse contexto, as técnicas de cultivo in vitro foram importantes tanto para a propagação massal, quanto como ferramenta para uma possível aplicação de outras técnicas biotecnológicas, contribuindo para uma produção homogênea, fiel e em larga escala. Portanto, este trabalho teve como objetivo geral avaliar as condições mais favoráveis à germinação, estabelecimento in vitro e micropropagação de Crambe abyssinica Hochst., além de verificar possíveis alterações genéticas e anatômicas, possibilitando a regeneração e produção de plântulas viáveis. Para a germinação e estabecimento in vitro de crambe, as condições mais favoráveis foram em meio B5 ou WPM, na presença ou ausência de pericarpo e na presença de luz. Na micropropagação dessa espécie, uma frequência satisfatória de regeneração de brotos foi obtida a partir de segmentos apicais utilizados como explante em meio contendo 5 μM de BAP (6- benzilaminopurina), e o alongamento foi satisfatório com 1 μM de GA3 (ácido giberélico). Os marcadores moleculares ISSR (Inter-Simples Sequence Repeats) utilizados para a análise da estabilidade genética indicaram que o segmento apical de crambe é um explante confiável para a micropropagação de plantas geneticamente verdadeiras (true-to-tipe), ou seja, mantém a estabilidade genética. As diversas fontes de citocininas e concentrações utilizadas neste trabalho não promoveram mudanças, no sentido de alterar a organização e/ou a espessura em relação ao controle, e as alterações observadas na estrutura e espessura das folhas dos tratamentos de aclimatização prejudicaram o processo de estabelecimento da plântula ex vitro. Contudo, existe a necessidade de um enraizamento e aclimatização eficiente para completa propagação in vitro de crambe. Portanto, este protocolo de regeneração de plantas in vitro de crambe pode ser útil no processo de criação e desenvolvimento de novas cultivares em um tempo mais curto e no melhoramento genético usando explantes apicais.

Biochemical and morpho-anatomical analyses of strawberry vitroplants hyperhydric tissues affected by BA and gelling agents

In vitro propagation has become an effective practice for large-scale production of strawberry plants. The objective of this study was to evaluate the hyperhydricity and the multiplication capacity of two strawberry varieties (Fragaria x ananassa Duch. 'Dover' and 'Burkley') propagated in vitro. Plants maintained in MS medium supplemented with 1.0 mg L-1 BA were individualized and transferred to the same medium solidified with Agar (6.5 g L-1) or Phytagel® (2.5 g L-1) and BA at different concentrations (0; 0.5; 1.0; 2.0 and 3.0 mg L-1). Biochemical and anatomical analyses were carried out, as well as the analysis of the morphological hyperhydricity characteristics. The analysis of data showed: a) the increase in cytokinin concentration increased hyperhydricity frequency in both varieties; b) at concentrations up to 2.0 mg L-1 BA, the replacement of Agar by Phytagel® induced a higher formation of hyperhydric shoots; and c) the addition of BA induced oxidative stress, which is characterized by increased antioxidant activity and lipid peroxidation, as well as alterations at the cellular level, such as malformation of stomata and epidermal cells. In conclusion, the culture medium containing 0.5 mg L-1 BA solidified with Agar provided lower hyperhydricity percentages in association with higher rates of shoot proliferation in strawberry.

Ventilation influence in occupational exposure to fungi and volatile organic compounds: poultry case

Introduction - In poultry houses, large-scale production has led to increased bird densities within buildings. Such high densities of animals kept within confined spaces are a source of human health problems related to occupational organic dust exposure. This organic dust is composed of both non-viable particles and viable particulate matter (also called bioaerosols). Bioaerosols are comprised by airborne bacteria, fungi, viruses and their by-products, endotoxins and mycotoxins. Exposure to fungi in broiler houses may vary depending upon the applied ventilation system. Ventilation can be an important resource in order to reduce air contamination in these type of settings. Nevertheless, some concerns regarding costs, sensitivity of the animal species to temperature differences, and also the type of building used define which type of ventilation is used. Aim of the study - A descriptive study was developed in one poultry unit aiming to assess occupational fungal and volatile organic compounds (VOCs) exposure.

Otimização de estruturas de destilação azeotrópica com recurso a planeamento experimental

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica

Data quality in biofilm high-throughput routine analysis: intralaboratory protocol adaptation and experiment reproducibility

Biofilm research is growing more diverse and dependent on high-throughput technologies and the large-scale production of results aggravates data substantiation. In particular, it is often the case that experimental protocols are adapted to meet the needs of a particular laboratory and no statistical validation of the modified method is provided. This paper discusses the impact of intra-laboratory adaptation and non-rigorous documentation of experimental protocols on biofilm data interchange and validation. The case study is a non-standard, but widely used, workflow for Pseudomonas aeruginosa biofilm development, considering three analysis assays: the crystal violet (CV) assay for biomass quantification, the XTT assay for respiratory activity assessment, and the colony forming units (CFU) assay for determination of cell viability. The ruggedness of the protocol was assessed by introducing small changes in the biofilm growth conditions, which simulate minor protocol adaptations and non-rigorous protocol documentation. Results show that even minor variations in the biofilm growth conditions may affect the results considerably, and that the biofilm analysis assays lack repeatability. Intra-laboratory validation of non-standard protocols is found critical to ensure data quality and enable the comparison of results within and among laboratories.

Desenvolvimento de uma matriz de sensores piezoresistivos baseados em técnicas de impressão

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

Optimization of magnetoelectric composites based on electroactive polymers for energy harvesting and sensor application

Tese de Doutoramento em Engenharia de Materiais.

Immunomodulation by microbial ribosomes

Over the past twenty years, many authors have reported evidence of the immunoprotective capacity of ribosomes isolated from bacteria, fungi and parasites. Since 1971 we have explored the protective capacity of ribosomes isolated from a large variety of microorganisms responsible for human and animal diseases. More recently, using monoclonal antibodies raised against ribosomes and then selected for their ability to confer passive immunity to mice, we have studied the mechanism of the protection induced by ribosomes. These studies, in parallel with the development of a technology for the large scale production of ribosomes, have allowed us to achieve a new regard for ribosomal vaccines for use in human. The general concept of ribosomal vaccines in presented and examples of two such vaccines are described with data on the specific protection that they induce in mice against experimental infections with Klebsiella peneumoniae, Streptococcus pneumoniae, S. pyogenes and Haemophilus influenzae for the first one, and against Candida albicans type A and type B for the second one. Because of their high immunogenicity and their innocuity these vaccines represent a decisive improvement over classical microbial vaccines.

Schistosomiasis vaccine development: progress and prospects

The undisputed, worldwide success of chemotherapy notwithstanding, schistosomiasis continues to defy control efforts in as much rapid reinfection demands repeated treatment, sometimes as often as once a year. There is thus a need for a complementary tool with effect for the longer term, notably a vaccine. International efforts in this direction have been ongoing for several decades but, until the recombinant DNA techniques were introduced, antigen production remained an unsurmountable bottleneck. Although animal experiments have been highly productive and are still much needed, they probably do not reflect the human situation adequately and real progress can not be expected until more is known about human immune responses to schistosome infection. It is well-known that irradiated cercariae consistently produce high levels of protection in experimental animals but, for various reasons, this proof of principle cannot be directly exploited. Research has instead been focussed on the identification and testing of specific schistosome antigens. This work has been quite successful and is already at the stage where clinical trials are called for. Preliminary results from coordinated in vitro laboratory and field epidemiological studies regarding the protective potential of several antigens support the initiation of such trials. A series of meetings, organized earlier this year in Cairo, Egypt, reviewed recent progress, selecteded suitable vaccine candidates and made firm recommendations for future action including pledging support for large-scale production according to good manufacturing practice (GMP) and Phase I trials. Scientists at the American Centers for Disease Control and Prevention (CDC) have drawn up a detailed research plan. The major financial support will come from USAID, Cairo, which has established a scientific advisory group of Egyptian scientists and representatives from current and previous international donors such as WHO, NIAID, the European Union and the Edna McConnell Clark Foundation.

r-Sm14 - pRSETA efficacy in experimental animals

Previous studies carried out with Sm14 in experimental vaccination against Schistosoma mansoni or Fasciola hepatica infections were performed with recombinant Sm14 (rSm14) produced in Escherichia coli by the pGEMEX system (Promega). The rSm14 was expressed as a 40 kDa fusion protein with the major bacteriophage T7 capsid protein. Vaccination experiments with this rSm14 in animal models resulted in consistent high protective activity against S. mansoni cercariae challenge and enabled rSm14 to be included among the vaccine antigens endorsed by the World Health Organization for phase I/II clinical trials. Since the preparation of pGEMEX based rSm14 is time consuming and results in low yield for large scale production, we have tested other E. coli expression systems which would be more suitable for scale up and downstream processing. We expressed two different 6XHis-tagged Sm14 fusion proteins in a T7 promoter based plasmids. The 6XHis-tag fusions allowed rapid purification of the recombinant proteins through a Ni+2-charged resin. The resulted recombinant 18 and 16 kDa proteins were recognized by anti-Sm14 antibodies and also by antiserum against adult S. mansoni soluble secreted/excreted proteins in Western-Blot. Both proteins were also protective against S. mansoni cercariae infection to the same extent as the rSm14 expressed by the pGEMEX system.

Using immunoglobulin Y as an alternative antibody for the detection of hepatitis A virus in frozen liver sections

An increasing amount of research has been conducted on immunoglobulin Y (IgY) because the use of IgY offers several advantages with respect to diagnostic testing, including its easy accessibility, low cost and translatability to large-scale production, in addition to the fact that it can be ethically produced. In a previous work, immunoglobulin was produced and purified from egg yolks (IgY) reactive to hepatitis A virus (HAV) antigens. In the present work, this anti-HAV-specific IgY was used in an indirect immunofluorescence assay to detect viral antigens in liver biopsies that were obtained from experimentally infected cynomolgus monkeys. Fields that were positive for HAV antigen were detected in liver sections using confocal microscopy. In conclusion, egg yolks from immunised hens may be a reliable source for antibody production, which can be employed for immunological studies.

Polymers of 3-hydroxyacids in plants

Polyhydroxyalkanoates (PHA) are polyesters of bacterial origin that have properties of biodegradable plastics and elastomers. Synthesis of PHA in crop plants would allow the large-scale production and use of these biodegradable and renewable polymers as substitutes for petroleum-derived plastics. Synthesis of a diversity of PHAs in plants, such as Arabidopsis thaliana, rapeseed, corn and cotton, has been demonstrated through the genetic engineering of metabolic pathways in the cytoplasm, plastid and peroxisome. PHA can also be used as a novel tool to study various aspects of plant metabolism, such as the regulation of carbon flux to the fatty acid biosynthetic and degradation pathways.

Multi-well fungal co-culture for de novo metabolite-induction in time-series studies based on untargeted metabolomics.

The induction of fungal metabolites by fungal co-cultures grown on solid media was explored using multi-well co-cultures in 2 cm diameter Petri dishes. Fungi were grown in 12-well plates to easily and rapidly obtain the large number of replicates necessary for employing metabolomic approaches. Fungal culture using such a format accelerated the production of metabolites by several weeks compared with using the large-format 9 cm Petri dishes. This strategy was applied to a co-culture of a Fusarium and an Aspergillus strain. The metabolite composition of the cultures was assessed using ultra-high pressure liquid chromatography coupled to electrospray ionisation and time-of-flight mass spectrometry, followed by automated data mining. The de novo production of metabolites was dramatically increased by nutriment reduction. A time-series study of the induction of the fungal metabolites of interest over nine days revealed that they exhibited various induction patterns. The concentrations of most of the de novo induced metabolites increased over time. However, interesting patterns were observed, such as with the presence of some compounds only at certain time points. This result indicates the complexity and dynamic nature of fungal metabolism. The large-scale production of the compounds of interest was verified by co-culture in 15 cm Petri dishes; most of the induced metabolites of interest (16/18) were found to be produced as effectively as on a small scale, although not in the same time frames. Large-scale production is a practical solution for the future production, identification and biological evaluation of these metabolites.