Fusion weld metal solidification:Continuum from weld interface to centerline

We present a brief résumé of the history of solidification research and key factors affecting the solidification of fusion welds. There is a general agreement of the basic solidification theory, albeit differing - even confusing - nomenclatures do exist, and Cases 2 and 3 (the Chalmers' basic boundary conditions for solidification, categorized by Savage as Cases) are variably emphasized. Model Frame, a tool helping to model the continuum of fusion weld solidification from start to end, is proposed. It incorporates the general solidification models, of which the pertinent ones are selected for the actual modeling. The basic models are the main solidification Cases 1…4. These discrete Cases are joined with Sub-Cases: models of Pfann, Flemings and others, bringing needed Sub-Case variables into the model. Model Frame depicts a grain growing from the weld interface to its centerline. Besides modeling, the Model Frame supports education and academic debate. The new mathematical modeling techniques will extend its use into multi-dimensional modeling, introducing new variables and increasing the modeling accuracy. We propose a model: melting/solidification-model (M/S-model) - predicting the solute profile at the start of the solidification of a fusion weld. This Case 3-based Sub-Case takes into account the melting stage, the solute back-diffusion in the solid, and the growth rate acceleration typical to fusion welds. We propose - based on works of Rutter & Chalmers, David & Vitek and our experimental results on copper - that NEGS-EGS-transition is not associated only with cellular-dendritic-transition. Solidification is studied experimentally on pure and doped copper with welding speed range from 0 to 200 cm/min, with one test at 3000 cm/min. Found were only planar and cellular structures, no dendrites - columnar or equiaxed. Cell sub structures: rows of cubic elements we call "cubelettes", "cell-bands" and "micro-cells", as well as an anomalous crack morphology "crack-eye", were detected, as well as microscopic hot crack nucleus we call "grain-lag cracks", caused by a grain slightly lagging behind its neighbors in arrival to the weld centerline. Varestraint test and R-test revealed a change of crack morphologies from centerline cracks to grainand cell boundary cracks with an increasing welding speed. High speed made the cracks invisible to bare eye and hardly detectable with light microscope, while electron microscope often revealed networks of fine micro-cracks.

Finite Element Analysis of Electrically Excited Quartz Tuning Fork Devices

Quartz Tuning Fork (QTF)-based Scanning Probe Microscopy (SPM) is an important field of research. A suitable model for the QTF is important to obtain quantitative measurements with these devices. Analytical models have the limitation of being based on the double cantilever configuration. In this paper, we present an electromechanical finite element model of the QTF electrically excited with two free prongs. The model goes beyond the state-of-the-art of numerical simulations currently found in the literature for this QTF configuration. We present the first numerical analysis of both the electrical and mechanical behavior of QTF devices. Experimental measurements obtained with 10 units of the same model of QTF validate the finite element model with a good agreement.

CoCo, a web interface for corpora compilation

CoCo is a collaborative web interface for the compilation of linguistic resources. In this demo we are presenting one of its possible applications: paraphrase acquisition.

MgO/Ag(001) interface structure and STM images from first principles

The interface of MgO/Ag(001) has been studied with density functional theory applied to slabs. We have found that regular MgO films show a small adhesion to the silver substrate, the binding can be increased in off-stoichiometric regimes, either by the presence of O vacancies at the oxide film or by a small excess of O atoms at the interface between the ceramic to the metal. By means of theoretical methods, the scanning tunneling microscopy signatures of these films is also analyzed in some detail. For defect free deposits containing 1 or 2 ML and at low voltages, tunnelling takes place from the surface Ag substrate, and at large positive voltages Mg atoms are imaged. If defects, oxygen vacancies, are present on the surface of the oxide they introduce much easier channels for tunnelling resulting in big protrusions and controlling the shape of the image, the extra O stored at the interface can also be detected for very thin films.

La collaboration interprofessionnelle à l'interface des institutions socio-éducative et psychiatrique. Jeux et enjeux de l'intervention auprès de personnes en situation de handicap mental et de troubles psychiques

La prise en charge et le suivi de personnes en situation de handicap mental souffrant de troubles psychiques et se trouvant donc à l'interface des domaines socio:éducatif et psychiatrique, constituent des défis complexes en matière de collaboration interprofessionnelle. Dans le canton de Vaud, les acteurs concernés par ce problème s'efforcent depuis de nombreuses années de créer des réseaux pluridisciplinaires visant un meilleur échange entre professionnels et le développement de compétences et de connaissances permettant d'améliorer le bien:être des bénéficiaires. Ce travail se propose ainsi d'étudier et de questionner ces modalités de travail dans une perspective socioculturelle (Vygotski, 1934/1997), afin d'en comprendre le fonctionnement, d'en éclairer les mécanismes et de fournir des pistes de réflexion aux professionnels. Il repose sur un travail de terrain mené auprès des membres du Dispositif de Collaboration Psychiatrie Handicap Mental (DCPHM) du Département de psychiatrie du CHUV, dont la mission principale est de faciliter la collaboration entre les institutions socio:éducatives et psychiatriques spécialisées dans le suivi des personnes en situation de handicap mental et souffrant de troubles psychiques. Le travail empirique est basé sur une approche qualitative et compréhensive des interactions sociales, et procède par une étude de terrain approfondie. Les données recueillies sont variées : notes de terrain et récolte de documentation, enregistrement de réunions d'équipe au sein du DCPHM et de réunions de réseau, et entretiens de différents types. L'analyse montre que le travail de collaboration qui incombe à l'équipe est constitué d'obstacles qui sont autant d'occasions de développement professionnel et de construction identitaire. Les résultats mettent en lumière des mécanismes discursifs de catégorisation concourant à la fois à la construction des patients comme objets d'activité, et à la construction d'une place qui légitime les interventions de l'équipe dans le paysage socio:éducatif et psychiatrique vaudois et la met au centre de l'arène professionnelle. -- Care and follow:up for people with mental disabilities suffering from psychological disorders : therefore at the interface between the socio:educational and psychiatric fields : represent complex challenges in terms of interprofessional collaboration. In the canton of Vaud, the caregivers involved in this issue have been trying for years to build multidisciplinary networks in order to better exchange between professionals and develop skills and knowledge to improve the recipients' well:being. This work thus proposes to study and question these working methods in a sociocultural perspective (Vygotski, 1934/1997) so as to understand how they operate, highlight inherent mechanisms and provide actionable insights to the professionals. It is based on fieldwork conducted among members of the Dispositif de Collaboration Psychiatrie Handicap Mental (DCPHM), of the Psychiatry Department at the CHUV University Hospital in Lausanne, whose main mission is to facilitate collaboration between the socio:educational and psychiatric institutions specialising in monitoring people presenting with both mental handicap and psychiatric disorder. The empirical work is based on a qualitative and comprehensive approach to social interactions, and conducted based on an in:depth field study. The data collected are varied - field notes and documentation collection, recordings of team meetings within the DCPHM and network meetings, and various types of interviews. The analysis shows that the collaborative work that befalls the team consists of obstacles, all of which provide opportunities for professional development and identity construction. The results highlight discursive strategies of categorisation which contribute both to the construction of the patients as objects of activity and to building a position that legitimates the team's interventions in the socio: educational and psychiatric landscape of canton Vaud and puts it in the centre of the professional arena.

Geospatial approach for defining the Wildland-Urban Interface in the Alpine environment

Problems related to fire hazard and fire management have become in recent decades one of the most relevant issues in the Wildland-Urban Interface (WUI), that is the area where human infrastructures meet or intermingle with natural vegetation. In this paper we develop a robust geospatial method for defining and mapping the WUI in the Alpine environment, where most interactions between infrastructures and wildland vegetation concern the fire ignition through human activities, whereas no significant threats exist for infrastructures due to contact with burning vegetation. We used the three Alpine Swiss cantons of Ticino, Valais and Grisons as the study area. The features representing anthropogenic infrastructures (urban or infrastructural components of the WUI) as well as forest cover related features (wildland component of the WUI) were selected from the Swiss Topographic Landscape Model (TLM3D). Georeferenced forest fire occurrences derived from the WSL Swissfire database were used to define suitable WUI interface distances. The Random Forest algorithm was applied to estimate the importance of predictor variables to fire ignition occurrence. This revealed that buildings and drivable roads are the most relevant anthropogenic components with respect to fire ignition. We consequently defined the combination of drivable roads and easily accessible (i.e. 100 m from the next drivable road) buildings as the WUI-relevant infrastructural component. For the definition of the interface (buffer) distance between WUI infrastructural and wildland components, we computed the empirical cumulative distribution functions (ECDF) of the percentage of ignition points (observed and simulated) arising at increasing distances from the selected infrastructures. The ECDF facilitates the calculation of both the distance at which a given percentage of ignition points occurred and, in turn, the amount of forest area covered at a given distance. Finally, we developed a GIS ModelBuilder routine to map the WUI for the selected buffer distance. The approach was found to be reproducible, robust (based on statistical analyses for evaluating parameters) and flexible (buffer distances depending on the targeted final area covered) so that fire managers may use it to detect WUI according to their specific priorities.

Effect of partial-thickness tear on loading capacities of the supraspinatus tendon: a finite element analysis.

Partial-thickness tears of the supraspinatus tendon frequently occur at its insertion on the greater tubercule of the humerus, causing pain and reduced strength and range of motion. The goal of this work was to quantify the loss of loading capacity due to tendon tears at the insertion area. A finite element model of the supraspinatus tendon was developed using in vivo magnetic resonance images data. The tendon was represented by an anisotropic hyperelastic constitutive law identified with experimental measurements. A failure criterion was proposed and calibrated with experimental data. A partial-thickness tear was gradually increased, starting from the deep articular-sided fibres. For different values of tendon tear thickness, the tendon was mechanically loaded up to failure. The numerical model predicted a loss in loading capacity of the tendon as the tear thickness progressed. Tendon failure was more likely when the tendon tear exceeded 20%. The predictions of the model were consistent with experimental studies. Partial-thickness tears below 40% tear are sufficiently stable to persist physiotherapeutic exercises. Above 60% tear surgery should be considered to restore shoulder strength.

El patrimoni educatiu, un element d'una pedagogia cultural i ciutadana

El present article desenvolupa els eixos de pensament que s’estan elaborant des de diferents angles sobre el patrimoni educatiu. Una revisió sobre la importància de les aportacions de les investigacions a l’entorn del patrimoni educatiu permet assenyalar els punts d’inflexió dels museus pedagògics en l’actualitat. Entre aquests destaca la influència que els museus pedagògics, a través de les seves activitats de recerca, difusió i formació, exerceixen en la conformació d’una pedagogia cultural i ciutadana. Amb la irrupció d’una pedagogia d’encuny culturalista, els museus pedagògics recuperen els fonaments i formes de creació de discurs de la pedagogia cultural sorgida a l’inici del segle XX, tot introduint les aproximacions etnogràfiques en les arrels dels estudis i investigacions. D’altra banda, també ressalta el fet que els museus pedagògics resignifiquen la seva acció a partir de les pedagogies ètiques que atorguen un paper principal als projectes de ciutadania. Així, doncs, ambdós aspectes, cultura i ciutadania, es perfilen com els trets diferencials dels museus pedagògics actuals. A més, aquesta caracterització requereix encara d’una reflexió sobre el sentit i amplitud dels canvis introduïts en els projectes museístics.

Impact of the Femoral Head Position on Moment Arms in Total Hip Arthroplasty: A Parametric Finite Element Study.

BACKGROUND: Although the importance of accurate femoral reconstruction to achieve a good functional outcome is well documented, quantitative data on the effects of a displacement of the femoral center of rotation on moment arms are scarce. The purpose of this study was to calculate moment arms after nonanatomical femoral reconstruction. METHODS: Finite element models of 15 patients including the pelvis, the femur, and the gluteal muscles were developed. Moment arms were calculated within the native anatomy and compared to distinct displacement of the femoral center of rotation (leg lengthening of 10 mm, loss of femoral offset of 20%, anteversion ±10°, and fixed anteversion at 15°). Calculations were performed within the range of motion observed during a normal gait cycle. RESULTS: Although with all evaluated displacements of the femoral center of rotation, the abductor moment arm remained positive, some fibers initially contributing to extension became antagonists (flexors) and vice versa. A loss of 20% of femoral offset led to an average decrease of 15% of abductor moment. Femoral lengthening and changes in femoral anteversion (±10°, fixed at 15°) led to minimal changes in abductor moment arms (maximum change of 5%). Native femoral anteversion correlated with the changes in moment arms induced by the 5 variations of reconstruction. CONCLUSION: Accurate reconstruction of offset is important to maintaining abductor moment arms, while changes of femoral rotation had minimal effects. Patients with larger native femoral anteversion appear to be more susceptible to femoral head displacements.

Utilização de uma interface do tipo "particle beam" para a obtenção de espectros de massas de compostos pouco voláteis em solução

Due to source contamination and wearing of instrument components problems caused by the direct insertion probe technique, a new way of introduction of low volatile compounds into mass spectrometer was tested. This new scheme comprises the introduction of the low volatile compounds solutions via a six port valve connected to a particle beam interface. Solutions of isatin were injected into this system and the best results were obtained with CH2Cl2, CH3OH and CH3CN. The solution inlet system has shown to be advantageous over the conventional way of direct insertion probe introduction.

Uma interface lab-made para aquisição de sinais analógicos instrumentais via porta paralela do microcomputador

A lab-made interface for acquisition of instrumental analog signals between 0 and 5 V at a frequency up to 670 kHz at the parallel port of a microcomputer is described. Since it uses few and small components, it was built into the connector of a printer parallel cable. Its performance was evaluated by monitoring the signals of four different instruments and similar analytical curves were obtained with the interface and from readings from the instrument' displays. Because the components are cheap (~U$35,00) and easy to get, the proposed interface is a simple and economical alternative for data acquisition in small laboratories for routine work, research and teaching.

Construção e avaliação de célula de fluxo para estudo da tensão interfacial dinâmica da interface fluxo líquido - sólido por despolarização da fluorescência

A simple low-cost flow cell was developed, built and optimized in order to observe dynamic interfacial tension of continuous flow systems. Distinct materials can be used in one of the cell walls in order to observe the intermolecular forces between the flowing liquid and the chemical constitution of the walls. The fluorescence depolarization was evaluated using Rhodamine B as fluorescent probe seeded in ethylene glycol. The effects of the positioning angles on the data acquired across the cell are reported. The reproducibility of the data was evaluated with a spectrometer assembled in-house and the relative standard deviation was below 3%.

Microcontroller-based interface circuit for inductive sensors

This work proposes a fully-digital interface circuit for the measurement of inductive sensors using a low-cost microcontroller (µC) and without any intermediate active circuit. Apart from the µC and the sensor, the circuit just requires an external resistor and a reference inductance so that two RL circuits with a high-pass filter (HPF) topology are formed. The µC appropriately excites such RL circuits in order to measure the discharging time of the voltage across each inductance (i.e. sensing and reference) and then it uses such discharging times to estimate the sensor inductance. Experimental tests using a commercial µC show a non-linearity error (NLE) lower than 0.5%FSS (Full-Scale Span) when measuring inductances from 1 mH to 10 mH, and from 10 mH to 100 mH.