Aplicação de técnicas de otimização no gerenciamento da deposição em redes de trocadores de calor

Deposição é um fenômeno indesejável que ocorre na superfície dos trocadores de calor ao longo de sua operação, ocasionando redução na efetividade térmica e aumento da resistência ao escoamento nestes equipamentos. Estes efeitos trazem grandes consequências econômicas e ambientais, devido ao aumento dos custos operacionais (energia adicional é requerida), aumento dos custos de projeto (demanda por equipamentos de maior área de troca térmica), limitações hidráulicas (que pode levar a uma diminuição da carga processada) e aumento das emissões (aumento da queima de combustíveis fósseis para suprir a energia adicional requerida). Neste contexto, o presente trabalho tem por objetivo fornecer ferramentas computacionais robustas que apliquem técnicas de otimização para o gerenciamento da deposição em redes de trocadores de calor, visando minimizar os seus efeitos negativos. Estas ferramentas foram desenvolvidas utilizando programação matemática no ambiente computacional GAMS, e três abordagens distintas para a resolução do problema da deposição foram pesquisadas. Uma delas consiste na identificação do conjunto ótimo de trocadores de calor a serem limpos durante uma parada para manutenção da planta, visando restaurar a carga térmica nesses equipamentos através da remoção dos depósitos existentes. Já as duas outras abordagens consistem em otimizar a distribuição das vazões das correntes ao longo de ramais paralelos, uma de forma estacionária e a outra de forma dinâmica, visando maximizar a recuperação de energia ao longo da rede. O desempenho destas três abordagens é ilustrado através de um conjunto de exemplos de redes de trocadores de calor, onde os ganhos reais obtidos com estas ferramentas de otimização desenvolvidas são demonstrados

Implementação paralelizada de métodos de resolução de sistemas algébricos na simulação de reservatórios de gás

Desde a década de 1960, devido à pertinência para a indústria petrolífera, a simulação numérica de reservatórios de petróleo tornou-se uma ferramenta usual e uma intensa área de pesquisa. O principal objetivo da modelagem computacional e do uso de métodos numéricos, para a simulação de reservatórios de petróleo, é o de possibilitar um melhor gerenciamento do campo produtor, de maneira que haja uma maximização na recuperação de hidrocarbonetos. Este trabalho tem como objetivo principal paralelizar, empregando a interface de programação de aplicativo OpenMP (Open Multi-Processing), o método numérico utilizado na resolução do sistema algébrico resultante da discretização da equação que descreve o escoamento monofásico em um reservatório de gás, em termos da variável pressão. O conjunto de equações governantes é formado pela equação da continuidade, por uma expressão para o balanço da quantidade de movimento e por uma equação de estado. A Equação da Difusividade Hidráulica (EDH), para a variável pressão, é obtida a partir deste conjunto de equações fundamentais, sendo então discretizada pela utilização do Método de Diferenças Finitas, com a escolha por uma formulação implícita. Diferentes testes numéricos são realizados a fim de estudar a eficiência computacional das versões paralelizadas dos métodos iterativos de Jacobi, Gauss-Seidel, Sobre-relaxação Sucessiva, Gradientes Conjugados (CG), Gradiente Biconjugado (BiCG) e Gradiente Biconjugado Estabilizado (BiCGStab), visando a uma futura aplicação dos mesmos na simulação de reservatórios de gás. Ressalta-se que a presença de heterogeneidades na rocha reservatório e/ou às não-linearidades presentes na EDH para o escoamento de gás aumentam a necessidade de métodos eficientes do ponto de vista de custo computacional, como é o caso de estratégias usando OpenMP.

植物根与茎输水结构的研究和功能分析

本文采用树脂复型法对裸子植物红豆杉的管胞，木本单子叶植物竹和棕榈藤木质部中各种管状分子（主要是导管和管胞）的内壁结构进行了研究;采用原子力显微镜对玉米和小麦根内皮层细胞内切向壁的表面结构进行了探索性的研究;用光学显微镜并结合荧光技术对典型的旱生、中生及水生植物根内皮层的次生加厚壁进行了比较观察;同时辅以传统的组织切片法对以上研究结果做了进一步的论证。 采用树脂复型法，不仅可观察到常规解剖法所能展示的结构，而且还可清晰地观察到管状分子间具缘纹孔对等常规方法所难以显示的三维构造，并对其各项结构参数进行了定量测量。结果表明：裸子植物管胞和竹、藤管状分子具缘纹孔的内、外口比例分别约为3:1 和1:1，其它各项结构参数均存在较大差别。此外，在云南省藤和桂竹等导管内壁上还观察到瘤层结构，瘤体直径大小为200-800纳米之间。 旱生植物内皮层细胞内切向壁的闪生加厚最为明显，水生植物的加厚程度最微弱，而中生植物则介于两类植物之间。玉米内皮层细胞内切向壁的内表面起伏不平，并具有70-90纳米的“孔状”质外体结构，其频率约为2，000个/平方微米。

贵州喀斯特森林优势木本植物水力结构特征

水力结构就是植物在特定的自然环境条件下，为适应生存竞争的需要所形成的不同形态结构和水分运输供给策略，它对于植物物种的分布、抗逆能力等方面起关键性作用。喀斯特常绿阔叶林生长的特有植物种类以其独特的形态解剖特征和生理适应性，很好的适应了喀斯特地区独特的水分和土壤环境，以维持自身的生存和最适生长。植物的水分关系是喀斯特地区特有植物种类适应环境的核心生理生态学问题之一。贵州喀斯特地区石漠化正日益加剧，因此，对贵州植物水力结构和环境适应性进行研究具有重要的意义。 目前，国内外学者在“冲洗法”中使用的不同冲洗溶质可能对植物木质部水力结构的测定结果等产生较大影响，因此本文首先研究了三种溶质的冲洗溶液对毛白杨(Populus tomentosa)和油松(Pinus tabulaeformis)枝条的水力导度和抵抗空穴化能力的影响。实验结果表明: 相对于去离子水，用0.01 M 的草酸和0.03 M KCl溶液作为冲洗溶液，均导致毛白杨木质部导管和油松管胞的水力导度测定值的增大。KCl导致毛白杨和油松木质部抵抗空穴化能力的测定值提高，草酸导致杨树抵抗空穴化能力测定值增强但导致油松抗空穴化能力测定值显著(P<0.01)减弱。小枝水平上，毛白杨和油松的水分运输效率和抗空穴化能力之间没有显著相关性。另外，在截枝实验中发现毛白杨小枝木质部水力导度随长度增加变化不大，而油松枝条的木质部水力导度有逐渐增大的趋势。以上的实验结果表明不同溶质下毛白杨和油松枝条的木质部水力导度和抵抗空穴化能力不同，草酸和KCl可能对木质部管道系统及纹孔处的果胶等产生作用，从而使毛白杨和油松的水力结构发生变化。毛白杨与油松水力结构在去离子水、草酸和KCl的作用下的不同结果及两物种截枝试验下水力导度的不同变化趋势，表明导管运输系统和管胞运输系统可能具有不同的水分运输影响因素。 在贵州花江、普定、荔波等地选择当地森林中39种优势木本植物作为研究对象，对其枝条的水力结构进行研究，结果表明: 该地区优势木本植物的水力结构与其他森林类型相比，其木质部抗栓塞化能力介于热带雨林和热带干热森林之间，而水力导度高于各森林类型的平均值。在石漠化程度不同的地区，植物总体的水力导度和水分运输的安全性没有呈现出明显的规律，但是同种植物在较为干旱的严重石漠化地区，其木质部安全性较高，植物在周围环境的影响下木质部水力结构朝着更适应周围环境的方向发展。 贵州喀斯特地区常绿植物和落叶植物的水力结构差异较为明显(P<0.05)。落叶树种主要在夏季生长，其最大水力导度较高，而冬季依靠落叶等方式度过不利的生长环境，因此其木质部安全性较常绿树种更为脆弱。总体而言，贵州喀斯特森林优势木本植物的在水力导度与安全性之间存在权衡关系，说明在大尺度水平上随着水力导度的提高即水分运输效率的提高，植物木质部抗空穴化的能力降低。

Comparison between empirical formulae of intake vortices

The hydrodynamic properties of free surface vortices at hydraulic intakes were investigated. Based on the axisymmetric Navier-Stokes equations and empirical assumptions, two sets of formulations for the velocity distributions and the free surface profiles are proposed and validated against measurements available in the literature. Compared with previous formulae, the modifications based on Mih's formula are found to greatly improve the agreement with the experimental data. Physical model tests were also conducted to study the intake vortex of the Xiluodu hydroelectric project in China. The proposed velocity distribution formula was applied to the solid boundary as considered by the method of images. A good agreement was again observed between the prediction and the measurements. © 2011 International Association for Hydro-Environment Engineering and Research.

Study on the critical submergence of surface vortices and the design of anti-vortex intakes

Surface vortex behavior in front of the tunnel intake was investigated in this paper. The critical submergence of vortex was discussed based on the concept of 'critical spherical sink surface' (CSSS). The vortex formation and evolution at the tunnel intake were analyzed based on the theory of CSSS considering the effect of circulation. A theory was proposed to explain the surface vortex. The theoretical development was verified by the physical model experiments of Xiluodu hydropower station. The radial velocity and vortex circulation were considered as the main factors that influence the formation and evolution of surface vortex. Finally, an anti-vortex intake configuration was proposed to weaken the air-core vortex in front of the tunnel intakes of the hydraulic structures. © 2011 Science China Press and Springer-Verlag Berlin Heidelberg.

Hydraulics for small fishing trawlers

Fishing vessels where electric power supply from alternator is available to operate various auxiliaries located anywhere in the vessel, the small crafts, which constitute over 95% of the total fishing crafts operating in India, are entirely dependent on one source of power, i. e. the main diesel engine. To utilize this source of motive power to operate the winches and other auxiliaries, mechanical drive involving shafts, bearings and pulleys, is inconvenient. This paper presents basic advantages of hydraulic system over mechanical drive.

Near-complete transuranic waste incineration in a thorium fuelled pressurised water reactor

The production of long-lived transuranic (TRU) waste is a major disadvantage of fission-based nuclear power. Incineration, and virtual elimination, of waste stockpiles is possible in a thorium (Th) fuelled critical or subcritical fast reactor. Fuel cycles producing a net decrease in TRUs are possible in conventional pressurised water reactors (PWRs). However, minor actinides (MAs) have a detrimental effect on reactivity and stability, ultimately limiting the quality and quantity of waste that can be incinerated. In this paper, we propose using a thorium-retained-actinides fuel cycle in PWRs, where the reactor is fuelled with a mixture of thorium and TRU waste, and after discharge all actinides are reprocessed and returned to the reactor. To investigate the feasibility and performance of this fuel cycle an assembly-level analysis for a one-batch reloading strategy was completed over 125 years of operation using WIMS 9. This one-batch analysis was performed for simplicity, but allowed an indicative assessment of the performance of a four-batch fuel management strategy. The build-up of 233U in the reactor allowed continued reactive and stable operation, until all significant actinide populations had reached pseudo-equilibrium in the reactor. It was therefore possible to achieve near-complete transuranic waste incineration, even for fuels with significant MA content. The average incineration rate was initially around 330 kg per GW th year and tended towards 250 kg per GW th year over several decades: a performance comparable to that achieved in a fast reactor. Using multiple batch fuel management, competitive or improved end-of-cycle burn-up appears achievable. The void coefficient (VC), moderator temperature coefficient (MTC) and Doppler coefficient remained negative. The quantity of soluble boron required for a fixed fuel cycle length was comparable to that for enriched uranium fuel, and acceptable amounts can be added without causing a positive VC or MTC. This analysis is limited by the consideration of a single fuel assembly, and it will be necessary to perform a full core coupled neutronic-thermal-hydraulic analysis to determine if the design in its current form is feasible. In particular, the potential for positive VCs if the core is highly or locally voided is a cause for concern. However, these results provide a compelling case for further work on concept feasibility and fuel management, which is in progress. © 2011 Elsevier Ltd. All rights reserved.

Eliminating discharge imbalances in predicting shallow water flows with shocks

The shallow water equations are widely used in modelling environmental flows. Being a hyperbolic system of differential equations, they admit shocks that represent hydraulic jumps and bores. Although the water surface can be solved satisfactorily with the modern shock-capturing schemes, the predicted flow rate often suffers from imbalances where shocks occur, eg the mass conservation is violated by failing to maintain a constant discharge rate at every cross-section in a steady open channel flow. A total-variation-diminishing Lax-Wendroff scheme is developed, and used to demonstrate how to achieve an exact flux balance. The performance of the proposed methods is inspected through some test cases, which include 1- and 2-dimensional, flat and irregular bed scenarios. The proposed methods are shown to preserve the mass exactly, and can be easily extended to other shock-capturing models.

The performance of closed reactor grade plutonium-thorium fuel cycles in reduced-moderation pressurised water reactors

The production of long-lived transuranic (TRU) waste is a major disadvantage of fission-based nuclear power. Previous work has indicated that TRU waste can be virtually eliminated in a pressurised water reactor (PWR) fuelled with a mixture of thorium and TRU waste, when all actinides are returned to the reactor after reprocessing. However, the optimal configuration for a fuel assembly operating this fuel cycle is likely to differ from the current configuration. In this paper, the differences in performance obtained in a reduced-moderation PWR operating this fuel cycle were investigated using WIMS. The chosen configuration allowed an increase of at least 20% in attainable burn-up for a given TRU enrichment. This will be especially important if the practical limit on TRU enrichment is low. The moderator reactivity coefficients limit the enrichment possible in the reactor, and this limit is particularly severe if a negative void coefficient is required for a fully voided core. Several strategies have been identified to mitigate this. Specifically, the control system should be designed to avoid a detrimental effect on moderator reactivity coefficients. The economic viability of this concept is likely to be dependent on the achievable thermal-hydraulic operating conditions. © 2012 Elsevier Ltd. All rights reserved.

Improving model quality through computer controlled saturation

In dynamic centrifuge modelling, fluids with enhanced viscosity are often used to correct for the discrepancy in time scaling. However, great care must be taken when using a high viscosity fluid that hydraulic gradients during saturation do not become high enough to cause excessive model disturbance. This paper introduces the CAM-Sat system which aims to improve the saturation process by continually controlling the fluid flow into the model, limiting it to rates low enough to avoid model disturbance. A new method for measuring the fluid flow rate is then described, and its implementation & improvement to the system is discussed. © 2010 Taylor & Francis Group, London.

Long-term performance of cement-bentonite containment wall

The paper presents hydraulic conductivity, unconfined compression strength (UCS) and triaxial test results of an 11 year old slag-cement-bentonite (CB) cut-off wall material and identifies factors affecting their long-term performance. The laboratory tests were performed on three types of CB samples ranging from contaminated block field samples to uncontaminated laboratory cast samples. The results showed that hydraulic conductivity reduces till 3 years and UCS increases till 90 days, but there after it remains constant till 11 years of age. The mean hydraulic conductivity and UCS values of block field samples are inferior and have large variability than laboratory cured samples. Such variations are mainly because of heterogeneity caused by aggressive environment and impurities within the specimen. Consolidated undrained triaxial test found that under an effective confining pressure of less than 200 kPa, tension failure occurred since the minor principal stress dropped to zero value at failure. The research outcome is useful for understanding future liability of CB wall and improving their design. © 2009 IOS Press.

PH-dependent leaching behaviour and other performance properties of cement-treated mixed contaminated soil

Portland cement has been widely used for stabilisation/solidification (S/S) treatment of contaminated soils. However, there is a dearth of literature on pH-dependent leaching of contaminants from cement-treated soils. This study investigates the leachability of Cu, Pb, Ni, Zn and total petroleum hydrocarbons (TPH) from a mixed contaminated soil. A sandy soil was spiked with 3000 mg/kg each of Cd, Cu, Pb, Ni and Zn, and 10,000 mg/kg of diesel, and treated with ordinary Portland cement (CEM I). Four different binder dosages, 5%, 10%, 15% and 20% (m/m) and different water contents ranging from 13%-19% dry weight were used in order to find a safe operating envelope for the treatment process. The pH-dependent leaching behaviour of the treated soil was monitored over an 84-day period using a 3-point acid neutralisation capacity (ANC) test. The monolithic leaching test was also conducted. Geotechnical properties such as unconfined compressive strength (UCS), hydraulic conductivity and porosity were assessed over time. The treated soils recorded lower leachate concentrations of Ni and Zn compared to the untreated soil at the same pH depending on binder dosage. The binder had problems with Pb stabilisation and TPH leachability was independent of pH and binder dosage. The hydraulic conductivity of the mixes was generally of the order, 10-8 m/sec, while the porosity ranged from 26%-44%. The results of selected performance properties are compared with regulatory limits and the range of operating variables that lead to acceptable performance described. © 2012 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences.