Produtividade fabril III - método para rápido aumento da produtividade fabril: redução de tempos inativos e do tempo de espera do material em processo

O método para rápido aumento da produtividade fabril, aplicável principalmente à indústria brasileira de manufatura (17% do PIB), fundamenta-se exclusivamente na redução ou eliminação do tempo inativo do homem, da máquina e do material, que é a grande causa da ineficiência. O método exige a utilização de apenas cinco das mais simples, elementares e conhecidas técnicas e é aplicável às vinte situações mais freqüentes (objetos de estudo) na indústria de manufatura. Nossa experiência atesta que o método pode proporcionar à produtividade fabril um aumento superior a 30%, em poucos meses e de forma perene. Sua aplicação e a implantação das medidas dele decorrentes são feitas com extrema facilidade e, por isto, os resultados surgem muito rapidamente. Atinge portanto seu objetivo: proporcionar aumento da produtividade fabril em curto espaço de tempo. Este artigo (terceiro e último da série) detalhará doze objetos de estudo (situações): 1. redução dos tempos inativos causados por troca de turno, por refeição e por troca de produtos; 2. redução dos tempos improdutivos acarretados por causas mais importantes, por espera pelo serviço de manutenção, por espera pelo serviço de preparação, por espera pelo operador e por causas não apontáveis pelos procedimentos usuais; 3. redução das atividades improdutivas e das produtivas executadas num ritmo improdutivo; e 4. redução do tempo de espera do material em processamento pela redução do tamanho do lote de fabricação e pelo aumento da velocidade de manufatura.

Investigação da estabilidade térmica e das propriedades elétricas do TiO2 em função da dopagem com Ce(SO4)2

The metalic oxides have been studies due to differents applications as materials semiconductor in solar cells, catalysts, full cells and, resistors. Titanium dioxide (TiO2) has a high electric conductivity due to oxygen vacancies. The Ce(SO4)2.2H2O doped samples TiO2 and TiO2 pure was obtained sol-gel process, and characterized by X-ray diffractometry,thermal analysis, and impedance spectroscopy. The X-ray diffraction patterns for TiO2 pure samples shows at 700°C anatase phase is absent, and only the diffraction peaks of rutile phase are observed. However, the cerium doped samples only at 900°C rutile in the phase present with peaks of cerium dioxide (CeO2). The thermal analysis of the TiO2 pure and small concentration cerium doped samples show two steps weight loss corresponding to water of hydration and chemisorbed. To larger concentration cerium doped samples were observed two steps weight loss in the transformation of the doped cerium possible intermediate species and SO3. Finally, two steps weight loss the end products CeO2 and SO3 are formed. Analyse electric properties at different temperatures and concentration cerium doped samples have been investigated by impedance spectroscopy. It was observed that titanium, can be substituted by cerium, changing its electric properties, and increased thermal stability of TiO2 anatase structure

Influência espaço-temporal e fisiológica na absorção de nutrientes e elementos tóxicos por Eichhornia crassipes visando o uso adequado da sua biomassa: o caso do Rio Apodi/Mossoró - RN

This study aims to determine the amount of nutrients and toxic elements in aquatic macrophytes of species Eichhornia crassipes present in River Apodi/Mossoró - RN and check some of the possibilities of using the biomass produced, based on the influence of space - temporal and physiological absorption of nutrients by plants. For this, was determined: Leaf area, Leaf wet mass, Leaf dry mass, Real humidity, Apparent humidity, Ash, Total nitrogen, Crude protein, Calcium, Magnesium, Potassium, Total phosphorus, Sodium, Iron, Copper, Manganese, Zinc, Nickel, Cobalt, Aluminum, Cadmium, Lead and Total chromium at different times, 2 sampling points and 2 parts of plants (leaves and roots). The results show that the levels of nutrients, protein and toxic elements present in plant tissue of Eichhornia crassipes are influenced by spatial, temporal and physiological variability. In general, because the maximum values in the dry matter for total nitrogen (4.4088 g/100g), crude protein (27.5549 g/100g), total phosphorus (0.642 g/100 g), calcium (1.444 g/100g), magnesium (0.732 g/100 g), potassium (7.51 g/100 g), copper (4.4279 mg/100g), manganese (322.668 mg/100g), sodium (1.39 g/100g), iron (194.169 mg/100g) and zinc (3.5836 mg/100g), there was the possibility of using biomass of Eichhornia crassipes for various purposes such as in food animal, products production for human consumption, organic fertilizers, fabrication of brick low cost, and crafts. For all these applications requires a control of the levels of substances in plant tissue. Based on the levels of nutrients and crude protein, the younger plants (0 Month) would be best to have their biomass used. Moreover, one factor that contributes to the use of larger plants (6 Months), the levels of toxic elements which have significantly small or below the detection limit. Therefore, further studies quantifying the biomass produced/m2 at 0 and 6 months are needed for a more correct choice for the best time of harvest

Uso do pó da palha de carnaúba em compósitos de quitosana

In this work a biodegradable composite using the carnauba straw s powder as reinforcement on chitosan matrix polymeric were manufactured. Firstly, were carried out the chemistry characterization of the carnauba straw s powder before and after treatments with NaOH and hexane. Goering and Van Soest method (1970), flotation test, moisture absorption, FTIR, TG/DTG, DSC and SEM have also being carried out. Composites were developed with variations in granulometry and in powder concentrations. They were characterized by TG/DTG, SEM and mechanicals properties. The results of chemical composition showed that the carnauba straw s powder is composed of 41% of cellulose; 28,9% of hemicellulose and 14% of lignin.The flotation test have indicated that the chemical treatment with NaOH decreased the powder s hidrophilicity.The thermal analysis showed increased of thermal stability of material after treatments. The results of FTIR and SEM revealed the removal of soluble materials from the powder (hemicelluloses and lignin), the material became rougher and clean. The composites obtained showed that the mechanicals properties of the composites were decreased in respect at chitosan films, and the composites with the powder at 150 Mesh showed less variation in the modulus values. The speed test of 10 mm/min showed the better reproducibility of the results and is in agreement to the standard ASTM D638. The SEM analysis of fracture showed the low adhesion between the fiber/matrix. The increase of volume of powder in the composite caused a decrease in values of stress and strain for the samples with untreated powder and treated with hexane. The composite with 50% of the powder s treated in NaOH didn t have significant variation in the values of stress and strain as compared with the composites with 10% of the powder, showing that the increase in the volume of fiber didn t affect the stress and strain of the composite. Thereby, it is concluded that the manufacture of polymeric composites of chitosan using carnauba straw s powder can be done, without need for pre-treatment of reinforcement, become the couple of carnauba straw s powder-chitosan a good alternative for biodegradable composites

Análise bromatológica de carnes antes e após o processamento para obtenção de charque

The process of salting and drying in the sun is used to preserve meat since the beginning of civilization. There is evidence that this preservation technique has arisen in Egypt, between 4,000 and 5,000 years ago. In our country, according to literature, was the first industrial product that gave the appearance of beef jerky, beef being produced, where about 70% to 75% of the muscle is composed of water, where it will be around 45% as a final product, according to the law in his article RIISPOA No. 432 provides that the jerky should contain no more than this amount of moisture in the muscular portion, or more than 15% of total ash with tolerance of up to 5% variation . Besides this parameter, proteins, lipids, ash, and minerals were analyzed in samples before and after the manufacturing process to know the content of these nutrients. Since these are considered important in product quality, thus the concentration in these samples, respectively, in the flesh Front (CD and CHD) before and after the manufacturing process for humidity were respectively 75.28% and 47.38% , the protein was 14.17 and 22.20 g / 100 g sample, 6.360 and 4.251 of lipids g/100g of the sample, and the ashes 0.974 9.144 g/100g sample, minerals like calcium and 4.074 30 , 06 ppm, sódio0, 055 and 5.401 g / L, sodium chloride, 0.139 and 13.74 g / L, potassium 237.5 and 166.8 ppm, 1.721 and 3.295 ppm iron, 0.143 and 0.135 ppm phosphorus, zinc and 4.690 6.905 ppm; magnésio14, 63 e13, 75 ppm manganese .017 e0, 007ppm, copper 0.057 and 0.039 ppm in the case of needle-type meat (CPA and CHPA), 68.04% and 44.17%, protein 13 , 72, and 24.42 g/100g of sample, 1.137 in the ash and 12.68 g / 100g of sample, and the minerals calcium 17.11 and 12.89 ppm; sódio0, 123 and 4.871 g / L, sodium chloride 0.312 and 12.39 g / L, potassium 305.3 and 182.1 ppm; ferro1, 817 and 1.513 ppm, 0.273 and 0.139 ppm phosphorus, zinc 6.305 and 4.783 ppm, 27.95 and 15.85 ppm magnesium, manganese and 0.025 0.011 ppm, 0.057 and 0.143 ppm copper and chromium 0.014 and 0.068 ppm

Passividade na interface prótese/pilar intermediário de infraestrutura implantossuportadas confeccionadas pela tecnologia CAD/CAM e método convencional

The objective of this research was to evaluate the passivity and strain induced in infrastructures screwed on abutments, made by CAD/CAM technology, and to compare these samples with parts manufactured by conventional casting. Using CAD/CAM technology, 4 samples were made from zirconia (Zircad) and 4 samples were manufactured from cobaltchrome (CoCrcad). The control groups were 4 specimens of cobalt-chrome, made by onepiece casting (CoCrci), for a total of 12 infrastructures. To evaluate the passivity, the infraestructures were installed on the abutments. One end was tightened and the vertical gap between the infrastructure and the prosthetic abutment was measured with scanning electron microscopy (250×). The mean strain in these infrastructures was analyzed via the photoelasticity test. A significant difference (p = 0.000) in passivity was observed between the control (CoCrci) and sample groups (CoCrcad and CoCrci). CoCrcad exhibited the best value of passivity (48.76 ± 13.45 μm) and CoCrci the worst (187.55 ± 103.63 μm), Zircad presented an intermediate value (103.81 ± 43.15 μm). When compared to the other groups, CoCrci showed the highest mean strain around the implants (17.19 ± 7.22 kPa). It was concluded that the zirconia infrastructure made by CAD / CAM showed a higher vertical marginal misfit than those made in cobalt-chromium alloy with the same methodology, however, the tension generated in the implants was similar. The CAD/CAM technology is more accurate for passivity and mean strain of infrastructure screwed on abutments than conventional manufacturing techniques

Análises histológica e morfométrica do uso de membrana biossintética de celulose em trocleoplastia experimental de cães

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Quilombolas e desenvolvimento sustentável: análise a partir da comunidade Capoeira dos Negros (Macaíba/RN)

Quilombo communities remaining are groups marked by insufficient public assistance and characterized by living in rural and conducting economic activities such as agriculture. The development on a sustainable basis is important to ensure strategies for economic growth and environmental preservation. This work aims to study the remaining Quilombo Capoeira Black community, located in the municipality of Macaíba, Rio Grande do Norte, considering the principles of sustainable development. Attempt to respond to what level such community can be considered sustainable from an analysis of their social practices. The methodological procedures used consisted of a literature review and documentary, questionnaires, conducting semi-structured interviews and direct observation. The final results show that the family farm has characteristics that approximate the principles of sustainable development, including the diversification of labor, food production with less environmental damage and strengthening the rural environment, and indicate that the main economic activities practiced in Capoeira dos Negros community are agriculture, manufacturing of cassava flour and brick manufacturing, which, in turn, are linked to negative environmental impacts, such as sedimentation pond, groundwater contamination, air pollution and soil erosion. What lead to the conclusion that the social practices of the community are not in line with the dimensions of sustainable development. It is hoped that the survey results provide subsidies for development and implementation of public policies

Aplicação de resíduo industrial para isolamento térmico: uma proposta para utilização do poliuretano de mamona com agregado de resíduo plástico termofixo

A aplicação de isolantes térmicos em sistemas construtivos promove vantagens com vistas ao conforto térmico de ambientes. E com isso, o aumento da produtividade em locais de trabalho, a sensação de bem-estar e a diminuição dos custos com climatização. A demanda por conforto ambiental, no âmbito da isolação térmica, somada ao advento de novas leis que regulam os requisitos mínimos de conforto, as exigências dos consumidores pela adoção de métodos de produção mais “limpos”, a fiscalização quanto à destinação de resíduos industriais, além da inserção de produtos no mercado com apelos ambientais, incentivaram o desenvolvimento da presente pesquisa. O presente trabalho trata da aplicação do poliuretano, visando comparar o desempenho térmico do derivado de origem vegetal (óleo de mamona) com adição de resíduo plástico termofixo em diferentes proporções (5%, 10%, 15% e 20%), com o poliuretano petrolífero, a lã de vidro e a lã de rocha através da análise de suas propriedades térmicas (condutividade térmica – k, difusividade térmica – e capacidade calorífica – Cp). . Após a realização dos ensaios, os compósitos estudados foram moídos e reutilizados como carga para novos compósitos. Com base nos resultados dos ensaios de propriedades térmicas, constatou-se que o material desenvolvido conduz menos calor que o poliuretano de petróleo, a lã de vidro e a lã de rocha, além de oferecer alta inércia térmica, bom desempenho térmico e baixo custo. Assim como foi comprovada a possibilidade de fabricação de novos compósitos para fins de isolamento, reutilizando os compósitos testados

Espectros fractais em sistemas nanoestruturados e cristais fotônicos

The study of the elementary excitations such as photons, phonons, plasmons, polaritons, polarons, excitons and magnons, in crystalline solids and nanostructures systems are nowdays important active field for research works in solid state physics as well as in statistical physics. With this aim in mind, this work has two distinct parts. In the first one, we investigate the propagation of excitons polaritons in nanostructured periodic and quasiperiodic multilayers, from the description of the behavior for bulk and surface modes in their individual constituents. Through analytical, as well as computational numerical calculation, we obtain the spectra for both surface and bulk exciton-polaritons modes in the superstructures. Besides, we investigate also how the quasiperiodicity modifies the band structure related to the periodic case, stressing their amazing self-similar behavior leaving to their fractal/multifractal aspects. Afterwards, we present our results related to the so-called photonic crystals, the eletromagnetic analogue of the electronic crystalline structure. We consider periodic and quasiperiodic structures, in which one of their component presents a negative refractive index. This unusual optic characteristic is obtained when the electric permissivity and the magnetic permeability µ are both negatives for the same range of angular frequency ω of the incident wave. The given curves show how the transmission of the photon waves is modified, with a striking self-similar profile. Moreover, we analyze the modification of the usual Planck´s thermal spectrum when we use a quasiperiodic fotonic superlattice as a filter.

Propriedades fisicas do monocristal fe/mgo(100) e estudo da expansao termica da superficie da ag(100)

In this work we have developed a way to grow Fe/MgO(100) monocrystals by magnetron sputtering DC. We investigated the growing in a temperature range among 100 oC and 300 oC. Structural and magneto-crystalline properties were studied by different experimental techniques. Thickness and surface roughness of the films were investigated by atomic force microscopy, while magneto-crystalline properties were investigated by magneto-optical Kerr effect and ferromagnetic resonance. Our results show that as we increase the deposition temperature, the magneto-crystalline anisotropy of the films also increases, following the equation of Avrami. The best temperature value to make a film is 300 oC. As the main result, we built a base of magnetoresistence devices and as an aplication, we present measurements of Fe/Cr/Fe trilayer coupling. In a second work we investigated the temperature dependence of the first three interlayer spacings of Ag(100) surface using low energy electron diffraction. A linear expansion model of crystal surface was used and the values of Debye temperatures of the first two layers and thermal expansion coefficient were determinated. A relaxation of 1% was found for Ag(100) surface and these results are matched with faces (110) and (111) of the silver. iv

Das farinhadas à produção para o mercado: a dinâmica da atividade mandioqueira no agreste potiguar.

El Agreste Potiguar es el territorio de Rio Grande do Norte en que más se produce yuca. La formación de ese territorio asociase a la ganadería y al cultivo de algodón y de cultivos de autoconsumo, de entre los cuales, la yuca. En lo concerniente, específicamente al cultivo de la yuca, esa planta siempre ha sido sumamente importante para la subsistencia de los agrestinos , sobre todo, de los pobres. Hasta la década de 1980, la yuca era cultivada en pequeñas parcelas de tierra y era destinada a la fabricación de harina, que juntamente con el frijol, era la base de la alimentación de los trabajadores agrestinos. Además, era bastante útil para la producción de ración para el ganado. A partir de esa década, la actividad mandioquera (cultivo de la yuca con la transformación de ésta en harina y en otros derivados) desencadenada en el Agreste Potiguar empieza a pasar por un proceso de modernización, siendo implementadas transformaciones técnicas y en las relaciones de trabajo, bajo la lógica capitalista. Dentro de esa lógica, el cultivo de la yuca pasa a ser hecho con el uso de máquinas y de abonos químicos; la transformación en harina es actualmente realizada en manufacturas y en industrias de harina, que vienen siendo, cada vez más, marcadas por instrumentos técnicos movidos a electricidad, disminuyendo la necesidad de mano de obra; y la yuca no es más cultivada por los productores con el objetivo primordial de garantizar su subsistencia, pero sí con el de atender a la demanda por materia prima de las manufacturas y de las industrias de harina. De este modo, el objetivo del trabajo es comprender la dinámica de la actividad mandioquera en el Agreste Potiguar, considerando el uso pasado y actual del territorio, la modernización de esa actividad y su contribución al desarrollo del territorio en cuestión. Como procedimientos metodológicos, adoptamos la realización de investigaciones bibliográficas, empíricas (entrevistas y conversaciones) y el análisis de datos secundarios. Finalmente, sabiéndose que el proceso de modernización estudiado sigue la lógica capitalista, concluimos el trabajo afirmando que la modernización de la actividad mandioquera no viene contribuyendo al desarrollo territorial del Agreste Potiguar.

Feira livre e circuitos da economia urbana: um estudo da feira da Pedra, em São Bento (PB)

The Feira da Pedra is an extension of the open fair of São Bento in the State of Paraiba. It is a system of trade in textile goods produced by textile industry in manufacturing of hammocks and derivatives of this industry, present in some cities in the state of Paraiba and Rio Grande do Norte, as a survival strategy, inserted in the list of tertiary and retail of the urban economics of this city. It is thereby aimed to discuss about the urban economics, reflecting on the open fair system from the two circuits of urban economy, mainly in the context of the dynamics of the current period of geographic space, the technical-scientific-informational period, as the specific empirical object, the Feira da Pedra of São Bento (PB). For this, this research was carried out in two stages of operation: a) surveys of secondary data and b) primary data collection which were reported an operational triad: I) literature; II) documentary research, and III) research of field. The presence of the Feira da Pedra in São Bento has shown us one of the most important characteristics of this city, in order to present major economic, social and cultural benefits to the local population, and contribute to (re) production of sertanejo space, making lower part of the circuit of its urban economy. This activity has entailed several dynamics for urban space in this city, mainly because of attracting large numbers of people, carrying typical actions of its relationship with the urban space are são-bentense and built environment. Thus, its importance is not only a local and regional phenomenon, but also a cultural reference of a place in the geographical area of many paraibanos and norte-rio-grandenses subjects, as the case of this activity has brought to its weekly routine, this product resulting from the textile working of this area of Sertão Paraibano and Seridó Potiguar

Análise microbiológica e caracterização eletroforética do queijo mussarela elaborado a partir de leite de búfala

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicação da abordagem estatística no contexto da gestão da qualidade: um survey b com indústrias de alimentos de São Paulo

Nas últimas duas décadas, o crescimento do interesse pela metodologia Seis Sigma intensificou a aplicação da abordagem estatística e de outras abordagens quantitativas com o intuito de melhorar não apenas a qualidade de produtos, serviços e processos, como também aumentar o desempenho organizacional e o processo de tomada de decisão. Este artigo trata da aplicação da abordagem estatística no contexto da gestão da qualidade em indústrias de alimentos de médio e grande porte do Estado de São Paulo com o propósito de: identificar quais ferramentas e técnicas estatísticas são mais amplamente empregadas por indústrias do setor para garantir e controlar a qualidade; avaliar a interdependência entre o sucesso da implementação de programas de qualidade e segurança alimentar como Boas Práticas de Fabricação (BPF) e sistema de Análise de Perigos e Pontos Críticos de Controle (APPCC) e o uso de estatística; e analisar estimativas do grau de relevância do pensamento estatístico e de seus benefícios como ferramenta de melhoria da qualidade. Um survey exploratório-descritivo foi realizado e os resultados revelaram que a abordagem estatística começa a ser mais valorizada nas indústrias de alimentos pela relevância de seus benefícios assim como já ocorre em outros setores. Há evidências de que a implantação bem sucedida dos programas de segurança alimentar seja uma condição primordial para o uso efetivo de estatística e de outras abordagens quantitativas.