Role and purpose of standards in the context of national curriculum and assessment reform for accountability, improvement and equity in student learning

In this article our starting point is the current context of national curriculum change and intense speculation about the assessment, standards and reporting. It is written against a background of accountability measures and improvement imperatives, and focuses attention on standards as offering representations of quality. We understand standards to be constructs that aim to achieve public credibility and utility. Further, they can be examined for the purposes they seek to serve and also their expected functions. Fitness for purpose is therefore a useful notion in considering the nature of standards. Our interest in the discussion is the ‘fit’ between how standards are formulated and how they are used in practice, by whom and for what purposes. A related interest is in the matter of how standards can be harnessed to realise improvement.

The use of phase in complex spectrum subtraction for robust speech recognition

In this paper we propose a new method for utilising phase information by complementing it with traditional magnitude-only spectral subtraction speech enhancement through Complex Spectrum Subtraction (CSS). The proposed approach has the following advantages over traditional magnitude-only spectral subtraction: (a) it introduces complementary information to the enhancement algorithm; (b) it reduces the total number of algorithmic parameters, and; (c) is designed for improving clean speech magnitude spectra and is therefore suitable for both automatic speech recognition (ASR) and speech perception applications. Oracle-based ASR experiments verify this approach, showing an average of 20% relative word accuracy improvements when accurate estimates of the phase spectrum are available. Based on sinusoidal analysis and assuming stationarity between observations (which is shown to be better approximated as the frame rate is increased), this paper also proposes a novel method for acquiring the phase information called Phase Estimation via Delay Projection (PEDEP). Further oracle ASR experiments validate the potential for the proposed PEDEP technique in ideal conditions. Realistic implementation of CSS with PEDEP shows performance comparable to state of the art spectral subtraction techniques in a range of 15-20 dB signal-to-noise ratio environments. These results clearly demonstrate the potential for using phase spectra in spectral subtractive enhancement applications, and at the same time highlight the need for deriving more accurate phase estimates in a wider range of noise conditions.

Faculty and employee ownership of inventions in Australia

A recent decision by the Australian High Court means that, unless faculty are bound by an assignment or intellectual property (IP) policy, they may own inventions resulting from their research. Thirty years after its introduction, the US Bayh-Dole Act, which vests ownership of employee inventions in the employer university or research organization, has become a model for commercialization around the world. In Australia, despite recommendations that a Bayh-Dole style regime be adopted, the recent decision in University of Western Australia (UWA) v Gray1 has moved the default legal position in a diametrically opposite direction. A key focus of the debate was whether faculty’s duty to carry out research also encompasses a duty to invent. Late last year, the Full Federal Court confirmed a lower court ruling that it does not, and this year the High Court refused leave to appeal (denied certiorari). Thus, Gray stands as Australia’s most faculty-friendly authority to date.

Measuring costs of sustainability issues in highway infrastructure : perception of stakeholders in Australia

With increasing pressure to deliver environmentally friendly and socially responsible highway infrastructure projects, stakeholders are also putting significant focus on the early identification of financial viability and outcomes for these projects. Infrastructure development typically requires major capital input, which may cause serious financial constraints for investors. The push for sustainability has added new dimensions to the evaluation of highway projects, particularly on the cost front. Comprehensive analysis of the cost implications of implementing place sustainable measures in highway infrastructure throughout its lifespan is highly desirable and will become an essential part of the highway development process and a primary concern for decision makers. This paper discusses an ongoing research which seeks to identify cost elements and issues related to sustainable measures for highway infrastructure projects. Through life-cycle costing analysis (LCCA), financial implications of pursuing sustainability, which are highly concerned by the construction stakeholders, have been assessed to aid the decision making when contemplating the design, development and operation of highway infrastructure. An extensive literature review and evaluation of project reports from previous Australian highway projects was first conducted to reveal all potential cost elements. This provided the foundation for a questionnaire survey, which helped identify those specific issues and related costs that project stakeholders consider to be most critical in the Australian industry context. Through the survey, three key stakeholders in highway infrastructure development, namely consultants, contractors and government agencies, provided their views on the specific selection and priority ranking of the various categories. Findings of the survey are being integrated into proven LCCA models for further enhancement. A new LCCA model will be developed to assist the stakeholders to evaluate costs and investment decisions and reach optimum balance between financial viability and sustainability deliverables.

An investigation of dose calculation accuracy in intensity-modulated radiotherapy of sites in the head & neck

Knowledge of the accuracy of dose calculations in intensity-modulated radiotherapy of the head and neck is essential for clinical confidence in these highly conformal treatments. High dose gradients are frequently placed very close to critical structures, such as the spinal cord, and good coverage of complex shaped nodal target volumes is important for long term-local control. A phantom study is presented comparing the performance of standard clinical pencil-beam and collapsed-cone dose algorithms to Monte Carlo calculation and three-dimensional gel dosimetry measurement. All calculations and measurements are normalized to the median dose in the primary planning target volume, making this a purely relative study. The phantom simulates tissue, air and bone for a typical neck section and is treated using an inverse-planned 5-field IMRT treatment, similar in character to clinically used class solutions. Results indicate that the pencil-beam algorithm fails to correctly model the relative dose distribution surrounding the air cavity, leading to an overestimate of the target coverage. The collapsed-cone and Monte Carlo results are very similar, indicating that the clinical collapsed-cone algorithm is perfectly sufficient for routine clinical use. The gel measurement shows generally good agreement with the collapsed-cone and Monte Carlo calculated dose, particularly in the spinal cord dose and nodal target coverage, thus giving greater confidence in the use of this class solution.

A preliminary examination of the effects of changes in motorcycle licensing in Queensland

Several sets of changes have been made to motorcycle licensing in Queensland since 2007, with the aim of improving the safety of novice riders. These include a requirement that a motorcycle learner licence applicant must have held a provisional or open car licence for 12 months, and imposing a 3 year limit for learner licence renewal. Additionally, a requirement to hold an RE (250 cc limited) class licence for a period of 12 months prior to progressing to an R class licence was introduced for Q-RIDE. This paper presents analyses of licensing transaction data that examine the effects of the licensing changes on the duration that the learner licence was held, factors affecting this duration and the extent to which the demographic characteristics of learner licence holders changed. The likely safety implications of the observed changes are discussed.

Pockets of creativity in business processes

Creative processes, for instance, the development of visual effects or computer games, increasingly become part of the agenda of information systems researchers and practitioners. Such processes get their managerial challenges from the fact that they comprise both well-structured, transactional parts and creative parts. The latter can often not be precisely specified in terms of control flow, required resources, and outcome. The processes’ high uncertainty sets boundaries for the application of traditional business process management concepts, such as process automation, process modeling, process performance measurement, and risk management. Organizations must thus exercise caution when it comes to managing creative processes and supporting these with information technology. This, in turn, requires a profound understanding of the concept of creativity in business processes. In response to this, the present paper introduces a framework for conceptualizing creativity within business processes. The conceptual framework describes three types of uncertainty and constraints as well as the interrelationships among these. The study is grounded in the findings from three case studies that were conducted in the film and visual effects industry. Moreover, we provide initial evidence for the framework’s validity beyond this narrow focus. The framework is intended to serve as a sensitizing device that can guide further information systems research on creativity-related phenomena.

The validity of simulators in studying driving behaviours

Driver simulators provide safe conditions to assess driver behaviour and provide controlled and repeatable environments for study. They are a promising research tool in terms of both providing safety and experimentally well controlled environments. There are wide ranges of driver simulators, from laptops to advanced technologies which are controlled by several computers in a real car mounted on platforms with six degrees of freedom of movement. The applicability of simulator-based research in a particular study needs to be considered before starting the study, to determine whether the use of a simulator is actually appropriate for the research. Given the wide range of driver simulators and their uses, it is important to know beforehand how closely the results from a driver simulator match results found in the real word. Comparison between drivers’ performance under real road conditions and in particular simulators is a fundamental part of validation. The important question is whether the results obtained in a simulator mirror real world results. In this paper, the results of the most recently conducted research into validity of simulators is presented.

Proof of causation in informed consent cases : establishing what the plaintiff would have done

A degree of judicial caution in accepting the assertion of a plaintiff as to what he or she would have done, if fully informed of risks, is clearly evident upon a review of decisions applying the common law. Civil liability legislation in some jurisdictions now precludes assertion evidence by a plaintiff. Although this legislative change was seen as creating a significant challenge for plaintiffs seeking to discharge the onus of proof of establishing causation in such cases, recent decisions suggest a more limited practical effect. While a plaintiff’s ex post facto assertions as to what he or she would have done if fully informed of risks may now be inadmissible, objective and subjective evidence as to the surrounding facts and circumstances, in particular the plaintiff’s prior attitudes and conduct, and the assertion evidence of others remains admissible. Given the court’s reliance on both objective and subjective evidence, statistical evidence may be of increasing importance.

Impacts and opportunities : resident's view on sustainable development of tourism in regional Queensland, Australia

Tourism development is a priority for rural and regional areas of Australia. The challenge is how to develop the tourism industry in a sustainable manner. As part of a larger project investigating community perceptions of opportunities, strategies and challenges in regional sustainable development, this article explores participant's views and opinions of tourism development. Through purposive sampling, 28 local community leaders and residents in the Darling Downs region in Queensland, Australia, participated in four semi-structured focus groups. This paper focuses on two of these focus groups, where tourism was a critical issue. Participants were generally positive about the tourism industry and its impacts on their community, although they expressed several triple bottom line concerns about economic, environmental and scoial issues. Four key themes emerged: appropriate land use management, limited resources and ageing/insufficient infrastructure, preservaation of community heritage and lifestyle, and regional conflict. Residents supported sustainable tourism development and wanted to be more actively involved in decision-making, demanding greater transparency - and true engagement - from local government.

Cultural determinants of stress in the construction industry

The need to better understand and deal with workplace stress has major implications for the construction industry, especially on a project level, because of its potential to directly impact on site productivity and safety, and ultimately, the achievement of project objectives. While there has been some understanding of the effect of workplace stress within the construction industry, the majority of these studies have explored individual determinants of workplace stress among construction professionals such as architects, engineers, quantity surveyors etc. To date, very little research has focused on workplace stress as encountered by construction site operatives. This is an important research deficiency as construction site operatives typically make up a significant percentage of on-site workforce and contribute most directly to project success. To address this imbalance in research, this paper proposes a theoretical framework to better understand site operatives’ experience of stress from a cultural perspective on three levels: individual, project and organizational which has been largely neglected in previous studies.

ACE research briefing paper 001 : the role of family in new business start-ups

This report uses data from the first two years of the CAUSEE study and focuses on the role of family in new business start-ups. While CAUSEE was not designed specifically to probe deeply into family matters the study does reveal interesting information on family orientated aspects including parental role models, family involvement on the start-up team, and family as a source of funding and advice. These findings can also be related to other information gathered as part of the comprehensive phone interviews that are used to gather the research data for CAUSEE. Furthermore we are also able to compare firm founders and 'Regular' nascent firm and young firm start-ups with their 'High Potential' counterparts in terms of their degrees of family involvement. Unless otherwise stated any differences or effects we comment on are 'statistically significant' at the five per cent level - that is, they are likely to reflect true differences or effects in the entire population of Australian start-ups.

China's Creative Industries : Copyright, Social Network Markets and the Business of Culture in a Digital Age

China’s Creative Industries explores the role of new technologies, globalization and higher levels of connectivity in re-defining relationships between ‘producers’ and ‘consumers’ in 21st century China. The evolution of new business models, the impact of state regulation, the rise of entrepreneurial consumers and the role of intellectual property rights are traced through China’s film, music and fashion industries. The book argues that social network markets, consumer entrepreneurship and business model evolution are driving forces in the production and commercialization of cultural commodities. In doing so it raises important questions about copyright’s role in the business of culture, particularly in a digital age.

Fashion as consumer entrepreneurship : emergent risk culture, social network markets, and the launch of Vogue in China

China has a reputation as an economy based on utility: the large-scale manufacture of low-priced goods. But useful values like functionality, fitness for purpose and efficiency are only part of the story. More important are what Veblen called ‘honorific’ values, arguably the driving force of development, change and value in any economy. To understand the Chinese economy therefore, it is not sufficient to point to its utilitarian aspect. Honorific status-competition is a more fundamental driver than utilitarian cost-competition. We argue that ‘social network markets’ are the expression of these honorific values, relationships and connections that structure and coordinate individual choices. This paper explores how such markets are developing in China in the area of fashion and fashion media. These, we argue, are an expression of ‘risk culture’ for high-end entrepreneurial consumers and producers alike, providing a stimulus to dynamic innovation in the arena of personal taste and comportment, as part of an international cultural system based on constant change. We examine the launch of Vogue China in 2005, and China’s reception as a fashion player among the international editions of Vogue, as an expression of a ‘decisive moment’ in the integration of China into an international social network market based on honorific values.

A policy case study of blood in Australia

In 2008 the Australian government decided to remove white blood cells from all blood products. This policy of universal leucodepletion was a change to the existing policy of supplying leucodepleted products to high risk patients only. The decision was made without strong information about the cost-effectiveness of universal leucodepletion. The aims for this policy analysis are to generate cost-effectiveness data about universal leucodepletion, and to add to our understanding of the role of evidence and the political reality of healthcare decision-making in Australia. The cost-effectiveness analysis revealed universal leucodepletion costs $398,943 to save one year of life. This exceeds the normal maximum threshold for Australia. We discuss this result within the context of how policy decisions are made about blood, and how it relates to the theory and process of policy making. We conclude that the absence of a strong voice for cost-effectiveness was an important omission in this decision.