Influence of PTPN2 and pre-existing immunity on the generation of effector and memory CD8 T cells

Notre système immunitaire joue un rôle important pour la protection envers les maladies infectieuses. Au cours d'une réponse à une infection primaire, des cellules B et des cellules T spécifiques, dirigées contre le pathogène en question, sont générées et certaines d'entre elles deviennent des cellules dites mémoires. Leur fonction est de nous protéger contre une nouvelle infection avec le même pathogène, une infection secondaire. Dans certaines situations, comme c'est par exemple le cas avec la grippe, les pathogènes ne sont pas toujours complètement identiques et les cellules mémoires ne sont pas à même d'assurer leur rôle protecteur et d'empêcher une réinfection. Pourtant, on ne sait à l'heure actuelle que très peu comment une immunité acquise, mais non protectrice, influence le développement d'une réponse immunitaire ultérieure. Dans la première partie de cette thèse, nous avons étudié comment les cellules T mémoires cytotoxiques altèrent la réponse de cellules T cytotoxiques nouvellement induites. Au cours d'une réaction immunitaire dirigée contre une infection primaire, un vaste répertoire de lymphocytes T est créé, constitué de cellules T possédant divers degrés d'affinité pour le pathogène. Lors d'une infection secondaire, seules les cellules T ayant une forte affinité pour le pathogène participent à la réponse. Nous avons pu démontrer que ce phénomène de restriction du répertoire des cellules T est principalement causé par les cellules T mémoires qui sont à même de reconnaître un antigène pathogénique présent dans les deux infections. Dans un deuxième projet, nous avons étudié comment l'absence de PTPN2 influence la réponse des cellules T. Chez l'homme, une mutation dans le gène de PTPN2 est associée à des maladies auto-immunes et résulte en une activité réduite de cette phosphatase dans les lymphocytes T. Nous avons montré que la baisse d'activité de la phosphatase PTNP2 conduit à une meilleure expansion des cellules T ayant une qualité comparable à des cellules T auto-antigène spécifiques. De plus, nous avons observé que la survie de ces cellules T effectues ayant une phosphatase diminuée est nettement améliorée. Cela peut conduire à une réponse immunitaire plus efficace ou, éventuellement, à une pathologie auto-immune plus grave. En outre, nos résultats montrent qu'en manipulant l'activité de cette phosphatase, il est possible d'augmenter l'efficacité du transfert des cellules T dans un hôte receveur. Un tel transfert de cellules T est pratiqué chez des patients atteints de tumeurs. Nos travaux suggèrent que la manipulation de la phosphatase PTPN2 pourrait donc représenter une approche thérapeutique novatrice et prometteuse. -- Notre système immunitaire joue un rôle important pour la protection contre les maladies. Les cellules T CD8+ ont une importance primordiale pour le contrôle d'infections primaires causées par des virus ou bactéries, mais également contre certaines tumeurs. Par conséquent, mieux comprendre les exigences nécessaires à l'induction de bonnes réponses des cellules T CD8 pourrait nous permettre de construire des vaccins contre les pathogènes contre lesquels nous n'avons pour l'instant pas de vaccins mais aussi d'améliorer les réactions immunitaires dirigées anti-tumorales. Dans la première partie de cette thèse, nous avons étudié l'influence qu'une immunité préexistante a sur la réponse des cellules T CD8. Nous sommes souvent exposés à des pathogènes qui sont similaires mais pas identiques à ceux que nous avons rencontrés auparavant. De telles infections hétérologues ne sont pas l'objet de beaucoup d'études et certains exemples indiquent même qu'une immunité préexistante partielle peut mener à une aggravation de la maladie. Nous avons étudié le répertoire des lymphocytes T CD8 qui sont générés lors d'une rencontre avec un nouvel antigène, et ce en comparant infection primaire et secondaire. En utilisant le modèle expérimental d'infections à Listeria monocytogenes, nous avons pu montrer que lors d'une infection primaire, un répertoire diversifié comprenant des cellules T CD8 de forte et faible affinité est constitué. Au contraire, dans le cas d'une infection secondaire, le répertoire des cellules T est fortement limité et seulement les lymphocytes T de forte affinité sont impliqués dans la réponse immunitaire. Nous avons pu démontrer que ces Rangements sont provoqués par des cellules T CD8 mémoires capables de reconnaître un antigène présent dans les deux infections. Cette augmentation du seuil d'activation des cellules effectrices est majoritairement causée par les lymphocytes T CD8 mémoires non transférables. Ces observations indiquent que les vaccins visant à induire des cellules T anti-tumorales de faible affinité seraient inefficaces si le vaccin contient des épitopes contre lesquels il existe une mémoire immunologique. Les réponses immunitaires conduites par les cellules T contre les antigènes tumoraux dépendent des cellules T CD8 de faible réactivité contre les antigènes tumoraux puisque les cellules à forte réactivité sont éliminées par les mécanismes de tolérance. Nous basant sur l'existence dans la littérature de preuves indiquant que PTPN2 influence la réponse des cellules T de faible affinité, nous nous sommes intéressés à comprendre comment PTPN2 impacte les réponses des cellules T CD8 en général. Nous avons remarqué que des cellules T CD8 déficientes en PTPN2 exhibent une meilleure capacité à proliférer suite à une faible ou courte stimulation du récepteur des lymphocytes T. La phase effectrice est prolongée et la contraction retardée résultant ainsi à globalement plus de cellules effectrices. Ce phénomène est également accompagné d'une meilleure survie des cellules effectrices de différentiation terminale. Une fois transférées dans un nouvel hôte receveur, les cellules effectrices terminales KLRG1+CD127- déficientes en phosphatase PTPN2 peuvent survivre et se transformer en cellules mémoires CD127+ fonctionnelles. De façon inattendue, nous avons découvert que l'élimination de PTPN2 améliore l'efficacité du transfert et la formation des cellules mémoires ainsi que leur capacité protectrice. Manipuler l'activité de cette phosphatase apparaît donc comme une approche intéressante et prometteuse pour la thérapie cellulaire par transfert adoptif de lymphocytes T. Nos observations montrent que la manipulation d'un facteur intrinsèque, l'absence de PTPN2, peut, dans certaines circonstances, améliorer la réponse des cellules T. Une meilleure connaissance des mécanismes contrôlant la réponse des lymphocytes T CD8 pourrait donc permettre la manipulation de ces derniers et conduire à des réponses immunitaires plus vigoureuses. Si ces réponses sont déclenchées par l'utilisation de vaccins, il est nécessaire de considérer l'historique d'une exposition préalable à des agents pathogènes ou à des vaccins puisque celle-ci peut, comme nous l'avons démontré, influencer le répertoire des cellules T recrutées dans la réponse immunitaire et, par conséquent, modifier l'aptitude de notre système immunitaire à faire face à une infection. -- Our immune system plays an important role in the protection from disease. CD8 T cells are critical for the control of primary infections with most viruses and certain bacteria as well as against some tumors. Therefore, better knowledge of CD8 T cell responses might enable us to generate vaccines against pathogens for which currently no vaccines are available or to improve anti-tumor immune responses. In the first part of this thesis we addressed the issue how previously acquired immunity impacts on the response of CD8 T cells. We are often exposed to pathogens that are related but not identical to the previously encountered ones. Such heterologous infections are not well studied and there are some indications that partial pre-existing immunity may in some cases even lead to an enhancement of disease. We specifically studied the T cell repertoire of CD8 T cells that are responding to a newly encountered antigen in secondary compared to primary infections. Using the experimental model of Listeria monocytogenes infections, we showed that in primary infections a wide repertoire including high and low affinity CD8 T cells is recruited into the immune response. In contrast to this, in secondary infections, the T cell repertoire is severely restricted and only T cells of high affinity are responding. We were able to pinpoint this difference to the presence of memory CD8 T cells that recognize an antigen that is shared between the two subsequent infections. This increase in the activation threshold was most effectively mediated via non-transferable memory CD8 T cells. This would argue that vaccines targeting low affinity tumor-specific T cells would fail if the vaccine contains previously encountered CD8 T cell epitopes. T cell mediated immune responses to tumor antigen rely often on T cells which weakly react to tumor antigen as high affinity T cells are eliminated by tolerance mechanisms. Following indication in the literature that PTPN2 impacts on the response of such weakly antigen-reactive T cells, we investigated how PTPN2 impacts in general the response of CD8 T cells. We observed that CD8 T cells lacking PTPN2 show an enhanced expansion following weak or short-term T cell receptor stimulation. The effector phase is prolonged and contraction delayed thus resulting in overall more effector cells. This is accompanied by a better survival of terminal effector cells. When transferred into new recipients, KLRG1+CD127- terminal effector cells lacking PTPN2 can survive and convert into CD127+ functional memory cells. Surprisingly, we discovered that elimination of PTPN2 enhances the transfer efficacy and formation of memory cells as well as the protective capacity. Targeting PTPN2 might thus be a promising approach for adoptive T cell therapy. Our observations show how the manipulation of an intrinsic factor, the absence of PTPN2, can enhance T cell responses under certain circumstances. A better understanding of underlying mechanisms for the control of CDS T cell responses might enable the manipulation of these and allow for more powerful responses. If these responses are induced through vaccines it is imperative that the previous history of exposure to pathogens or vaccines is considered as it can, as we have shown in this thesis, influence the recruited T cell repertoire and thus possibly the ability to handle the infection.

Editor i disseny d'interiors

L’OpenGL és un motor 3D que s’utilitza com a lligam entre el software i el hardware gràfic. Actualment és una de les tecnologies més utilitzades en el disseny d’aplicacions 3D. El treball està realitzat amb el programa Visual C++, que és el més recomanat per al desenvolupament d’aplicacions OpenGL. L’objectiu principal d’aquest treball és aprendre a programar amb aquest tipus de tecnologia que no hem estudiat durant el període de carrera. Un altre objectiu del treball era trobar una funció útil i pràctica per a l’aplicació i ens vam decantar per a realitzar un editor d’habitacions per un botiga o empresa de mobles. L’usuari pot de forma molt ràpida i senzilla dibuixar com és l’habitació que vol decorar de forma totalment personalitzada. El programa li generarà l’habitació en tres dimensions i amb els materials que s’han escollit (terra, parets, portes…). Després pot editar-hi mobles personalitzats o pertanyents a la llibreria del programa. El programa incorpora també una base de dades per a l’empresa que ens portarà la gestió de clients, habitacions, textures i mobles (permet ampliar la llibreria del programa). Un cop acabada l’habitació el programa ens hi permet fer una visita de forma interactiva i generar-ne la factura entre altres funcions. La conclusió principal després d’haver acabat aquest projecte, és que a part d’haver après OpenGL, hem aconseguit realitzar una aplicació molt pràctica de cares al disseny d’interiorisme.

Response of fine root respiration to variations in biotic and abiotic factors in a mixed Mediterranean forest affected by drought-induced secondary succession

Understanding the factors controlling fine root respiration (FRR) at different temporal scales will help to improve our knowledge about the spatial and temporal variability of soil respiration (SR) and to improve future predictions of CO2 effluxes to the atmosphere. Here we present a comparative study of how FRR respond to variability in soil temperature and moisture in two widely spread species, Scots pines (Pinus sylvestris L.) and Holm-oaks (HO; Quercus ilex L.). Those two species show contrasting water use strategies during the extreme summer-drought conditions that characterize the Mediterranean climate. The study was carried out on a mixed Mediterranean forest where Scots pines affected by drought induced die-back are slowly being replaced by the more drought resistant HO. FRR was measured in spring and early fall 2013 in excised roots freshly removed from the soil and collected under HO and under Scots pines at three different health stages: dead (D), defoliated (DP) and non-defoliated (NDP). Variations in soil temperature, soil water content and daily mean assimilation per tree were also recorded to evaluate FRR sensibility to abiotic and biotic environmental variations. Our results show that values of FRR were substantially lower under HO (1.26 ± 0.16 microgram CO2 /groot·min) than under living pines (1.89 ± 0.19 microgram CO2 /groot·min) which disagrees with the similar rates of soil respiration previously observed under both canopies and suggest that FRR contribution to total SR varies under different tree species. The similarity of FRR rates under HO and DP furthermore confirms other previous studies suggesting a recent Holm-oak root colonization of the gaps under dead trees. A linear mixed effect model approach indicated that seasonal variations in FRR were best explained by soil temperature (p<0.05) while soil moisture was not exerting any direct control over FRR, despite the low soil moisture values during the summer sampling. Plant assimilation rates were positively related to FRR explaining part of the observed variability (p<0.01). However the positive relations of FRR with plant assimilation occurred mainly during spring, when both soil moisture and plant assimilation rates were higher. Our results finally suggest that plants might be able to maintain relatively high rates of FRR during the sub-optimal abiotic and biotic summer conditions probably thanks to their capacity to re-mobilize carbon reserves and their capacity to passively move water from moister layers to upper layers with lower water potentials (where the FR were collected) by hydraulic lift.

A quasi-materialist, quasi-dualist solution to the mind-body problem

If the mental can affect, or be affected by, the physical, then the mental must itself be physical. Otherwise the physical world would not be explanatorily closed. But it is closed. There are reasons to hold that materialism (in both its reductive and non-reductive varieties) is false. So how are we to explain the apparent responsiveness of the physical to the mental and vice versa? The only possible solution seems to be this: physical objects are really projections or isomorphs of objects whose essential properties are mental. (A slightly less accurate way of putting this would be to say: the constitutive - i.e. the non-structural and non-phenomenal - properties of physical objects are mental, i.e. are such as we are used to encountering only in "introspection".) The chair, qua thing that I can know through sense perception, and through hypotheses based strictly thereupon, is a kind of shadow of an object that is exactly like it, except that this other objects essential properties are mental. This line of thought, though radically counterintuitive, explains the apparent responsiveness of the mental to the physical, and vice versa, without being open to any of the criticisms to which materialism, dualistic interaction ism, and epiphenomenalism are open.

Du kan om du vill : lärares tankar om fostran till företagsamhet

The overall purpose of this dissertation is to better knowledge and understanding of enterprise education and investigate how such can be expressed in a school environment. The study’s research objective focuses on what teachers think and value about enterprise education and how they feel they are able to support students in their development towards an enterprising initiative. In the study’s theoretical background description, enterprise education, which was introduced into the Finnish national curriculum in 1994, is investigated outgoing from six so-named paths: linguistic, economic, educational-political, cultural, psychological, and the pedagogical, which is the main focus of the study. In the theoretical background, different characteristics have been identified; these are functional, social, and individual enterprise. The study’s empirical foundation consists of interviews with thirty teachers working at comprehensive and upper secondary schools. Two research efforts are combined: a phenomenographic and a phenomenological. In both efforts, a hermeneutic analysis takes place. Five principles that facilitate interpretation are presented and used: the indispensability of pre-understanding, the indispensability of the dimension of time, the indispensability of totality, the indispensability of negativism, and the indispensability of rationality. One study result is that teachers understand enterprise education as immanent, technical, and/or cooperative activity. The majority of teachers choose to emphasize that the purpose of activity is comprised of individual and social activity that is directed towards personal development, in contrast to functional enterprise, which is directed towards a technical form of activity and business-related, entrepreneurial knowledge. The question of how teachers understand the phenomenon is of significance for how they value it. The results also show that teachers’ abilities to reassess and change their manner are influenced by their knowledge/skills and awareness that they have of the interpretive possibilities that enterprise education manifests. In order to stimulate students to enterprising initiatives, teachers stress activity-promoting methods, authenticity, and an auspicious atmosphere in educational activities.

Methods and Models for Accelerating Dynamic Simulation of Fluid Power Circuits

The objective of this dissertation is to improve the dynamic simulation of fluid power circuits. A fluid power circuit is a typical way to implement power transmission in mobile working machines, e.g. cranes, excavators etc. Dynamic simulation is an essential tool in developing controllability and energy-efficient solutions for mobile machines. Efficient dynamic simulation is the basic requirement for the real-time simulation. In the real-time simulation of fluid power circuits there exist numerical problems due to the software and methods used for modelling and integration. A simulation model of a fluid power circuit is typically created using differential and algebraic equations. Efficient numerical methods are required since differential equations must be solved in real time. Unfortunately, simulation software packages offer only a limited selection of numerical solvers. Numerical problems cause noise to the results, which in many cases leads the simulation run to fail. Mathematically the fluid power circuit models are stiff systems of ordinary differential equations. Numerical solution of the stiff systems can be improved by two alternative approaches. The first is to develop numerical solvers suitable for solving stiff systems. The second is to decrease the model stiffness itself by introducing models and algorithms that either decrease the highest eigenvalues or neglect them by introducing steady-state solutions of the stiff parts of the models. The thesis proposes novel methods using the latter approach. The study aims to develop practical methods usable in dynamic simulation of fluid power circuits using explicit fixed-step integration algorithms. In this thesis, twomechanisms whichmake the systemstiff are studied. These are the pressure drop approaching zero in the turbulent orifice model and the volume approaching zero in the equation of pressure build-up. These are the critical areas to which alternative methods for modelling and numerical simulation are proposed. Generally, in hydraulic power transmission systems the orifice flow is clearly in the turbulent area. The flow becomes laminar as the pressure drop over the orifice approaches zero only in rare situations. These are e.g. when a valve is closed, or an actuator is driven against an end stopper, or external force makes actuator to switch its direction during operation. This means that in terms of accuracy, the description of laminar flow is not necessary. But, unfortunately, when a purely turbulent description of the orifice is used, numerical problems occur when the pressure drop comes close to zero since the first derivative of flow with respect to the pressure drop approaches infinity when the pressure drop approaches zero. Furthermore, the second derivative becomes discontinuous, which causes numerical noise and an infinitely small integration step when a variable step integrator is used. A numerically efficient model for the orifice flow is proposed using a cubic spline function to describe the flow in the laminar and transition areas. Parameters for the cubic spline function are selected such that its first derivative is equal to the first derivative of the pure turbulent orifice flow model in the boundary condition. In the dynamic simulation of fluid power circuits, a tradeoff exists between accuracy and calculation speed. This investigation is made for the two-regime flow orifice model. Especially inside of many types of valves, as well as between them, there exist very small volumes. The integration of pressures in small fluid volumes causes numerical problems in fluid power circuit simulation. Particularly in realtime simulation, these numerical problems are a great weakness. The system stiffness approaches infinity as the fluid volume approaches zero. If fixed step explicit algorithms for solving ordinary differential equations (ODE) are used, the system stability would easily be lost when integrating pressures in small volumes. To solve the problem caused by small fluid volumes, a pseudo-dynamic solver is proposed. Instead of integration of the pressure in a small volume, the pressure is solved as a steady-state pressure created in a separate cascade loop by numerical integration. The hydraulic capacitance V/Be of the parts of the circuit whose pressures are solved by the pseudo-dynamic method should be orders of magnitude smaller than that of those partswhose pressures are integrated. The key advantage of this novel method is that the numerical problems caused by the small volumes are completely avoided. Also, the method is freely applicable regardless of the integration routine applied. The superiority of both above-mentioned methods is that they are suited for use together with the semi-empirical modelling method which necessarily does not require any geometrical data of the valves and actuators to be modelled. In this modelling method, most of the needed component information can be taken from the manufacturer’s nominal graphs. This thesis introduces the methods and shows several numerical examples to demonstrate how the proposed methods improve the dynamic simulation of various hydraulic circuits.

Enhancing absorptive capacity in a non-research and development. An action research approach to converting individual observations into organisational awareness

The ability to recognize potential knowledge and convert it into business opportunities is one of the key factors of renewal in uncertain environments. This thesis examines absorptive capacity in the context of non-research and development innovation, with a primary focus on the social interaction that facilitates the absorption of knowledge. It proposes that everyone is and should be entitled to take part in the social interaction that shapes individual observations into innovations. Both innovation and absorptive capacity have been traditionally related to research and development departments and institutions. These innovations need to be adopted and adapted by others. This so-called waterfall model of innovations is only one aspect of new knowledge generation and innovation. In addition to this Science–Technology–Innovation perspective, more attention has been recently paid to the Doing–Using–Interacting mode of generating new knowledge and innovations. The amount of literature on absorptive capacity is vast, yet the concept is reified. The greater part of the literature links absorptive capacity to research and development departments. Some publications have focused on the nature of absorptive capacity in practice and the role of social interaction in enhancing it. Recent literature on absorptive capacity calls for studies that shed light on the relationship between individual absorptive capacity and organisational absorptive capacity. There has also been a call to examine absorptive capacity in non-research and development environments. Drawing on the literature on employee-driven innovation and social capital, this thesis looks at how individual observations and ideas are converted into something that an organisation can use. The critical phases of absorptive capacity, during which the ideas of individuals are incorporated into a group context, are assimilation and transformation. These two phases are seen as complementary: whereas assimilation is the application of easy-to-accept knowledge, transformation challenges the current way of thinking. The two require distinct kinds of social interaction and practices. The results of this study can been crystallised thus: “Enhancing absorptive capacity in practicebased non-research and development context is to organise the optimal circumstances for social interaction. Every individual is a potential source of signals leading to innovations. The individual, thus, recognises opportunities and acquires signals. Through the social interaction processes of assimilation and transformation, these signals are processed into the organisation’s reality and language. The conditions of creative social capital facilitate the interplay between assimilation and transformation. An organisation that strives for employee-driven innovation gains the benefits of a broader surface for opportunity recognition and faster absorption.” If organisations and managers become more aware of the benefits of enhancing absorptive capacity in practice, they have reason to assign resources to those practices that facilitate the creation of absorptive capacity. By recognising the underlying social mechanisms and structural features that lead either to assimilation or transformation, it is easier to balance between renewal and effective operations.

Professional development among educators pursuing a B.Ed. program in special education in Tanzania : a study of motives and perceived outcomes

Implementation of different policies and plans aiming at providing education for all is a challenge in Tanzania. The need for educators and professionals with relevant knowledge and qualifications in special education is substantial. Teacher education does not equip educators with sufficient knowledge and skills in special education and professional development programs in special education are few in number. Up to 2005 no degree programs in special education at university level were available in Tanzania. The B.Ed. Special Education program offered by the Open University of Tanzania in collaboration with Åbo Akademi University in Finland was one of the efforts aimed at addressing the big national need for teachers and other professionals with degree qualifications in special education. This pilot program offered unique possibilities to study professional development in Tanzania. The research group in this study consisted of the group of students who participated in the degree program 2005-2007. The study is guided by three theoretical perspectives: individual, social and societal. The individual perspective emphasizes psychological factors as motives, motivation, achievement, self-directed behavior and personal growth. Within social perspective, professional development is viewed as situated within the social and cultural context. The third perspective, the societal, focuses on change, reforms, innovations and transformation of school systems and societies. Accordingly, professional development is viewed as an individual, social and societal phenomenon. The overall aim of the study is to explore the participants’ motives for participating in a B.Ed. Special Education program and the perceived outcomes of the program in terms of professional development. In order to achieve the objectives of the study, a case study approach was adopted. Questionnaires and semi-structured interviews were administered in three waves between January 2007 and February 2009 to the 35 educators participating in the B.Ed. Special Education program. The findings of the study reveal that the participants expressed motives which were related to job performance, knowledge, skills, academic degree and career. Also altruistic motives were expressed by the participants in terms of helping and supporting students with special needs and their communities. The perceived outcomes of the program were in line with the expressed motives. However, the results indicate that the participants also learned new skills, as interaction skills and guidance and counseling skills. Increased self-confidence was also mentioned as an outcome. The participants also got deepened understanding of disability issues. In addition, they learned strategies for creating awareness of persons with disability in the communities. Thus the findings of the study indicate positive outcomes of the program in terms of professional development. The conclusion of the study is that individual, social and societal factors interact when it comes to explaining why Tanzanian educators in special education choose to pursue a degree program in special education. The individual motives, as increased knowledge and better prospects of career development interact with the social and societal motives to help and support vulnerable student groups. The study contributes to increased understanding of the complexity of professional development and of the realities educators meet when educational reforms are implemented in a developing country.

The Application of Enterprise Architecture Approach to Military Concept Development–Case Study

Abstract—Concept development and experimentation (CD&E) plays an important role in driving strategic transformation in the military community. Defence architecture frameworks, such as the NATO architecture framework, are considered excellent means to support CD&E. There is not much empirical evidence, however, to indicate how enterprise architectures (EA) are applied in the military community or particularly in military CD&E. Consequently, this paper describes and discusses empirical application of the EA approach in CD&E. The research method in the paper is a case study. Situational method engineering (SiME) is used as a framework to adapt the EA approach to the case project of the paper. The findings of the paper suggest that the EA is applicable to CD&E work, although all aspects of the original concept could not be expressed in the EA model of the case project. The results also show that the SiME method can support in applying the EA framework to the CD&E in the case project.

The Global War on Terrorism in the Horn of Africa

Ever since Siad Barre’s regime was toppled in the beginning of the 1990’s Somalia has been without an effective central government. As a result Somalia has remained in an anarchic condition of state collapse for nearly two decades. This anarchy has often been put forward as a potential breeding ground for terrorism. As a response to this threat the United States has undertaken several policies, initiatives, and operations in the Horn of Africa generally and in Somalia specifically. In this descriptive study a twofold analysis has been undertaken. First, conditions in present day Somalia as well as Somali history have been analyzed to evaluate the potential Somalia holds as a terrorist base of operations or a recruiting- or staging area. Second, US strategies and actions have been analyzed to evaluate the adequacy of the US response to the threat Somalia poses in terms of terrorism. Material for the analyses have been derived from anthropological, political, and security studies dealing with Somalia. This material has been augmented by a wide range of news coverage, western and non-western. Certain different US policy documents from different levels have been chosen to represent US strategies for the Global War on Terrorism. Because Somali social institutions, such as the clan system, hold great weight in Somali society, Somalia is a difficult area of operations for terrorist networks. In addition the changing nature of Somali alliances and the tangled webs of conflict that characterize present day Somalia aggravate the difficulties that foreign terrorist networks would encounter in Somalia, would they choose to try to utilize it in any great extent. The US has taken potential terrorism threats in Africa and specifically Somalia very seriously. US actions in Somalia have mainly focused on apprehending or neutralizing terror suspects. Such policies, coupled with backing the Ethiopian invasion of Somalia may have actually turned out increasing Somalia’s terror potential.

Maintaining supply performance during an ERP system implementation phase : case Cloetta Suomi Oy

Implementing an enterprise resource planning (ERP) system often means a major change to an organization and involves significant risks. It is typical that many of the ERP system implementations fail resulting in tremendous damage to the business. Moreover, running normal business operations during an ERP system implementation is far more complicated than normally. This thesis focuses on how an organization should manage the ERP system implementation process in order to maintain supply performance during the implementation phase. The theoretical framework in this thesis focuses on ERP system implementations with a critical success factor approach. Critical success factors can be divided into strategic and tactical level success factors. By considering these critical success factors, ERP system implementation project’s timeline and best practices of an ERP implementation, a critical success factor based ERP system implementation management framework is presented. The framework can be used as a theoretical framework when the goal is to avoid ERP system implementation phase issues that are driven by the ERP system implementation project and that may decrease organization’s supply performance. This thesis is a case study that was written on an assignment to a confectionary company Cloetta Suomi Oy. In order to collect data, interviews of the case company personnel were conducted. In addition, several other data collection methods were used throughout the research process. These data collection methods include examination of presentations and archival records as well as direct observations in case company meetings and in various work duties. The results of this thesis indicate that there are several factors that may decrease organization’s supply performance during the ERP system implementation. These issues are categorized under external and internal issues and further into six risk drivers that are suppliers, customers, products, staff, information systems and other projects. After the description and categorization of each issue, the thesis focuses on finding solutions on how to avoid or mitigate the impact of these issues on the organization’s supply performance. This examination leads to several operational activities that are also practical to business practitioners. It is also stated that a successful ERP system implementation that also causes minimal disturbance to organization’s supply performance during the ERP system implementation, is achieved by considering three levels of actions.

Characterisation of waste for combustion : with special reference to the role of zinc

Waste combustion has gone from being a volume reducing discarding-method to an energy recovery process for unwanted material that cannot be reused or recycled. Different fractions of waste are used as fuel today, such as; municipal solid waste, refuse derived fuel, and solid recovered fuel. Furthermore, industrial waste, normally a mixture between commercial waste and building and demolition waste, is common, either as separate fuels or mixed with, for example, municipal solid waste. Compared to fossil or biomass fuels, waste mixtures are extremely heterogeneous, making it a complicated fuel. Differences in calorific values, ash content, moisture content, and changing levels of elements, such as Cl and alkali metals, are common in waste fuel. Moreover, waste contains much higher levels of troublesome trace elements, such as Zn, which is thought to accelerate a corrosion process. Varying fuel quality can be strenuous on the boiler system and may cause fouling and corrosion of heat exchanger surfaces. This thesis examines waste fuels and waste combustion from different angles, with the objective of giving a better understanding of waste as an important fuel in today’s fuel economy. Several chemical characterisation campaigns of waste fuels over longer time periods (10-12 months) was used to determine the fossil content of Swedish waste fuels, to investigate possible seasonal variations, and to study the presence of Zn in waste. Data from the characterisation campaigns were used for thermodynamic equilibrium calculations to follow trends and determine the effect of changing concentrations of various elements. The thesis also includes a study of the thermal behaviour of Zn and a full—scale study of how the bed temperature affects the volatilisation of alkali metals and Zn from the fuel. As mixed waste fuel contains considerable amounts of fresh biomass, such as wood, food waste, paper etc. it would be wrong to classify it as a fossil fuel. When Sweden introduced waste combustion as a part of the European Union emission trading system in the beginning of 2013 there was a need for combustion plants to find a usable and reliable method to determine the fossil content. Four different methods were studied in full-scale of seven combustion plants; 14Canalysis of solid waste, 14C-analysis of flue gas, sorting analysis followed by calculations, and a patented balance method that is using a software program to calculate the fossil content based on parameters from the plant. The study showed that approximately one third of the coal in Swedish waste mixtures has fossil origins and presented the plants with information about the four different methods and their advantages and disadvantages. Characterisation campaigns also showed that industrial waste contain higher levels of trace elements, such as Zn. The content of Zn in Swedish waste fuels was determined to be approximately 800 mg kg-1 on average, based on 42 samples of solid waste from seven different plants with varying mixtures between municipal solid waste and industrial waste. A review study of the occurrence of Zn in fuels confirmed that the highest amounts of Zn are present in waste fuels rather than in fossil or biomass fuels. In tires, Zn is used as a vulcanizing agent and can reach concentration values of 9600-16800 mg kg-1. Waste Electrical and Electronic Equipment is the second Zn-richest fuel and even though on average Zn content is around 4000 mg kg-1, the values of over 19000 mg kg-1 were also reported. The increased amounts of Zn, 3000-4000 mg kg-1, are also found in municipal solid waste, sludge with over 2000 mg kg-1 on average (some exceptions up to 49000 mg kg-1), and other waste derived fuels (over 1000 mg kg-1). Zn is also found in fossil fuels. In coal, the average level of Zn is 100 mg kg-1, the higher amount of Zn was only reported for oil shale with values between 20-2680 mg kg-1. The content of Zn in biomass is basically determined by its natural occurrence and it is typically 10-100 mg kg-1. The thermal behaviour of Zn is of importance to understand the possible reactions taking place in the boiler. By using thermal analysis three common Zn-compounds were studied (ZnCl2, ZnSO4, and ZnO) and compared to phase diagrams produced with thermodynamic equilibrium calculations. The results of the study suggest that ZnCl2(s/l) cannot exist readily in the boiler due to its volatility at high temperatures and its conversion to ZnO in oxidising conditions. Also, ZnSO4 decomposes around 680°C, while ZnO is relatively stable in the temperature range prevailing in the boiler. Furthermore, by exposing ZnO to HCl in a hot environment (240-330°C) it was shown that chlorination of ZnO with HCl gas is possible. Waste fuel containing high levels of elements known to be corrosive, for example, Na and K in combination with Cl, and also significant amounts of trace elements, such as Zn, are demanding on the whole boiler system. A full-scale study of how the volatilisation of Na, K, and Zn is affected by the bed temperature in a fluidised bed boiler was performed parallel with a lab-scale study with the same conditions. The study showed that the fouling rate on deposit probes were decreased by 20 % when the bed temperature was decreased from 870°C to below 720°C. In addition, the lab-scale experiments clearly indicated that the amount of alkali metals and Zn volatilised depends on the reactor temperature.

Building the ‘Digital’ Library: Routes to Managing our Institutional Digital Learning, Teaching and Research Assets Together

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Invenio as a platform to implement the SCOAP3 Repository

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

The effect of celebrity CEO’s crisis communication to crisis outcome

The purpose of this this study is to examine the effects that a celebrity CEO’s crisis communication has on the crisis outcome and further on the quick decision response, resource mobilization and information flow during a crisis. The research was conducted using a multiple embedded case method, with four cases that represent different kinds of crisis that have all involved a celebrity CEO. The cases have been collected from various secondary data sources. The results of the study indicate that in crisis situations the celebrity CEO is expected to take responsibility of the crisis communication. The CEO needs to understand how and what to communicate in these situations and they need to make quick decisions even with limited information available. Crisis outcome is highly dependent on the golden hour crisis communication and there the performance of the celebrity CEO is crucial.