Adsorção de Pb(II) utilizando adsorvente composto por montmorilonita e dolomita

The destructive impact of improper disposal of heavy metals in the environment increases as a direct result of population explosion, urbanization and industrial expansion and technological developments. Argil are potential materials for adsorption of inorganic and the pelletization of it is required for use in adsorptive columns of fixed bed. The low cost and the possibility of regeneration makes these materials attractive for use in the purification process, capable of removing inorganic compounds in contaminated aquatic environments. In this work was made pellets of a mixture of dolomite and montmorillonite by wet agglomeration, in different percentages. The removal of Pb (II) was investigated through experimental studies, and was modeled by kinetic models and isotherms of adsorption. The materials were characterized using the techniques of XRD, TG / DTA, FT-IR, and surface area by BET method. The results showed the adsorption efficiency of the contaminant by the composite material studied in synthetic solution. The study found that the adsorption follows the Langmuir model, and the kinetics of adsorption follows the model of pseudosecond order

Remoção de metais pesados em efluentes sintéticos utilizando vermiculita como adsorvente

Heavy metals are used in many industrial processestheirs discard can harm fel effects to the environment, becoming a serious problem. Many methods used for wastewater treatment have been reported in the literature, but many of them have high cost and low efficiency. The adsorption process has been used as effective for the metal remoal ions. This paper presents studies to evaluate the adsorption capacity of vermiculite as adsorbent for the heavy metals removal in a synthetic solution. The mineral vermiculite was characterized by differents techniques: specific surface area analysis by BET method, X-ray diffraction, raiosX fluorescence, spectroscopy in the infraredd region of, laser particle size analysis and specific gravity. The physical characteristics of the material presented was appropriate for the study of adsorption. The adsorption experiments weredriveal finite bath metod in synthetic solutions of copper, nickel, cadmium, lead and zinc. The results showed that the vermiculite has a high potential for adsorption, removing about 100% of ions and with removal capacity values about 85 ppm of metal in solution, 8.09 mg / g for cadmium, 8.39 mg/g for copper, 8.40 mg/g for lead, 8.26 mg/g for zinc and 8.38 mg/g of nickel. The experimental data fit in the Langmuir and Freundlich models. The kinetic datas showed a good correlation with the pseudo-second order model. It was conducteas a competition study among the metals using vermiculiti a adsorbent. Results showed that the presence of various metals in solution does not influence their removal at low concentrations, removing approximat wasely 100 % of all metals present in solutions

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Desenvolvimento de uma formulação cólon específica visando o tratamento da colite ulcerativa

Micro and nanoparticulate systems as drug delivery carriers have achieved successful therapeutic use by enhancing efficacy and reducing toxicity of potent drugs. The improvement of pharmaceutical grade polymers has allowed the development of such therapeutic systems. Microencapsulation is a process in which very thin coatings of inert natural or synthetic polymeric materials are deposited around microsized particles of solids or around droplets. Products thus formed are known as microparticles. Xylan is a natural polymer abundantly found in nature. It is the most common hemicellulose, representing more than 60% of the polysaccharides existing in the cell walls of corn cobs, and is normally degraded by the bacterial enzymes present in the colon of the human body. Therefore, this polymer is an eligible material to produce colon-specific drug carriers. The aim of this study was to evaluate the technological potential of xylan for the development of colon delivery systems for the treatment of inflammatory bowel diseases. First, coacervation was evaluated as a feasible method to produce xylan microcapsules. Afterwards, interfacial cross-linking polymerization was studied as a method to produce microcapsules with hydrophilic core. Additionally, magnetic xylan-coated microcapsules were prepared in order to investigate the ability of producing gastroresistant systems. Besides, the influence of the external phase composition on the production and mean diameter of microcapsules produced by interfacial cross-linking polymerization was investigated. Also, technological properties of xylan were determined in order to predict its possible application in other pharmaceutical dosage forms

Biodistribuição do pertecnetato de sódio após desvio gástrico em Y de Roux (técnica de capella)

O desvio gástrico em Y de Roux é a técnica cirúrgica mais utilizada no tratamento da obesidade mórbida. Esta operação reduz o volume do estômago e o comprimento do intestino delgado, gerando alterações estruturais e metabólicas que podem influenciar no resultado de exames cintilográficos de pacientes operados. Com o objetivo de avaliar a biodistribuição pós-operatória do pertecnetato de sódio (Na99mTc) em órgãos de ratos Wistar submetidos à técnica do bypass (desvio) gástrico em Y de Roux (BGYR), foram utilizados 12 ratos distribuídos aleatoriamente em grupo tratado (n=6), submetido à cirurgia do BGYR e o grupo controle (C; n=6). No 15º dia de pós-operatório foi administrado 0,1 mL via plexo orbital de Na99mTc aos animais dos dois grupos, com atividade radioativa média de 0,66MBq. Após 30 minutos, os ratos foram mortos e retirados fragmentos de tireóide, coração, pulmão, fígado, estômago, rim e fêmur. As amostras foram lavadas com solução salina 0,9%, pesadas e submetidas ao Contador Gama 1470, WizardTM Perkin-Elmer-Finlândia para determinação do percentual de atividade radioativa total por grama (%ATI/g) de cada órgão. Empregou-se o teste t de Student para análise estatística, considerando-se significantes as diferenças das médias quando p<0,05. Redução significante na média de %ATI/g foi observada no fígado, estômago e fêmur dos animais submetidos à cirurgia de BGYR comparada ao grupo controle (p<0,05). Nos demais órgãos não houve diferença estatisticamente significativa entre os grupos. Em conclusão, a cirurgia BGYR em ratos modificou a biodistribuição do Na99mTc em alguns órgãos, podendo ter implicações clínicas na interpretação de exames cintilográficos. Este estudo xi teve um caráter multidisciplinar com a participação de pesquisadores das áreas de Cirurgia Experimental, Farmácia, Radiobiologia, Medicina Nuclear e Estatística

Um modelo analítico da qualidade da dieta de adolescentes estudantes da rede publica de ensino de Natal, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Farinha de vísceras de aves em rações para a tilápia do Nilo (Oreochromis niloticus L.) durante a fase de reversão sexual

Neste trabalho, objetivou-se avaliar o desempenho, a sobrevivência e a efetividade de reversão de larvas de tilápia do Nilo (Oreochromis niloticus L.) alimentadas com rações contendo níveis crescentes de inclusão de farinha de vísceras de aves (FVA). Utilizou-se 500 larvas de tilápia do Nilo com dois dias de idade, distribuídas em um delineamento inteiramente casualizado com cinco tratamentos e cinco repetições, sendo a unidade experimental constituída por um aquário de 30 L com 20 larvas. Foram elaboradas cinco rações com cinco níveis de inclusão de FVA ( 0; 20; 40, 60% e 60% mais lisina sintética). Foram elaboradas rações isocalóricas, isocálcicas, isofosfóricas e isoprotéicas, com 60mg de a-metiltestosterona/kg, 38,6% de proteína digestível e 3.700 kcal de energia digestível/kg, de modo que a ração com inclusão de lisina foi isoaminoacídica para lisina em relação à ração sem a inclusão de FVA. O arraçoamento foi realizado quatro vezes ao dia, ad libitum. Ao final, foram avaliadas as médias de peso final (PF), comprimento total (CT), sobrevivência (SO) e efetividade de reversão (ER). Foi observado aumento linear no PF e CT com o aumento da inclusão da FVA na ração, enquanto, para SO, a ração sem FVA foi inferior às demais. As rações sem inclusão de FVA e com 20% de inclusão de lisina proporcionaram PF e CT médios inferiores e somente a ração sem FVA foi inferior para SO. Conclui-se que a FVA pode ser utilizada em rações para a tilápia do Nilo durante a reversão sexual.

Standard electrocardiographic values in Holstein calves

Este artigo apresenta valores eletrocardiográficos de 25 bezerros da raça Holandesesa, utilizando-se as derivações bipolares de membro (I, II, III), unipolares aumentadas de membro (avL, avR e avF) e uma derivação bipolar de torax (V10). Dois grupos com animais de diferentes idades foram comparados (18 a 72 horas e 27 a 33 dias de idade). Conclui-se que não houve diferença significativa entre os grupos nas ondas P, Q, R, S e T, nos intervalos PR, QRS, QT e ST e no eixo cardíaco.

Efeito da dexmedetomidina sobre a arritmia cardíaca induzida pela adrenalina em cães anestesiados pelo sevofluorano

Avaliou-se o efeito da dexmedetomidina sobre o ritmo cardíaco em 20 cães, sem raça definida, de ambos os sexos e considerados sadios, anestesiados pelo sevofluorano e submetidos a doses crescentes de adrenalina. Os animais foram, aleatoriamente, distribuídos em dois grupos (placebo e dexmedetomidina). No grupo placebo, os animais receberam, por via intravenosa, solução de NaCl a 0,9%, na dose de 0,3ml/kg. Foram considerados dois momentos, M0 e M1, imediatamente antes e após a aplicação, respectivamente. Após 10 minutos, realizou-se a indução anestésica com sevofluorano, por meio de máscara facial vedada, até a perda do reflexo laringotraqueal. em seguida, procedeu-se à intubação orotraqueal e a manutenção da anestesia foi realizada com a administração de sevofluorano na concentração de 1,5CAM, em circuito anestésico com reinalação parcial de gases. Decorridos 20 minutos da indução anestésica, iniciou-se a administração intravenosa contínua de solução de adrenalina a 2% em doses crescentes de 1, 2, 3, 4 e 5mg/kg/min, por meio de bomba de infusão, com aumento da dose em intervalos de 10 minutos. Imediatamente antes desse acréscimo eram feitas as mensurações (M2 a M6). No grupo dexmedetomidina empregou-se a mesma metodologia substituindo-se a solução de NaCl a 0,9% por hidrocloridrato de dexmedetomidina, na dose de 1µg/kg. Foram registradas as pressões arteriais, em M0 e em M2 a M6, e o traçado eletrocardiográfico, na derivação DII (M2 a M6), considerando-se para efeito estatístico o número total de bloqueios atrioventriculares (BAV) de primeiro e segundo graus e de complexos ventriculares prematuros (ESV), coincidentes com cada dose de adrenalina. Os dados foram submetidos à análise de variância seguida pelo teste de Tukey (P<0,05). Verificou-se que a dexmedetomidina interfere significativamente na condução atrioventricular levando a maior ocorrência de BAV e reduz o número de ESV nas doses infundidas de 2 e 3mg/kg/min de adrenalina. Logo após a aplicação de dexmedetomidina, observaram-se redução da freqüência cardíaca e da pressão arterial, cuja diminuição persistiu por até uma hora.

Eletrocardiografia computadorizada em cães da raça Beagle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Frankenstein, o prometeu moderno ciência, literatura e educação

À partir des études de l'anthropologue Bruno Latour, dans lesquelles on montre l'importance de la rhétorique et des stratégies institutionnelles dans la fabrication des vérités scientifiques; des hypothèses concernant la nature ambiguë des sciences dressées par Isabelle Stengers et des idées d'Edgar Morin sur la nécessité de combattre la pensée fragmenteuse et de relier culture scientifique et culture humanistique, la thèse aborde la relation de l'homme avec ses artefacts, le défi des descriptions des phénomènes et de leurs propriétés, du dialogue entre les humains et les plusieures dimensions de la matière, et de la responsabilité qui devrait venir avec tous les progrès scientifiques. Victor Frankenstein, sa créature, Brown-Séquard et la testostérone synthétique, sont des acteurs qui aident à composer le panorama cognitif de la recherche qui étend les limites de la science et du social au collectif de non-humains et revendique une réforme de la pensée et de l'éducation que les inclut

Compressão auto-adaptativa de imagens coloridas

Image compress consists in represent by small amount of data, without loss a visual quality. Data compression is important when large images are used, for example satellite image. Full color digital images typically use 24 bits to specify the color of each pixel of the Images with 8 bits for each of the primary components, red, green and blue (RGB). Compress an image with three or more bands (multispectral) is fundamental to reduce the transmission time, process time and record time. Because many applications need images, that compression image data is important: medical image, satellite image, sensor etc. In this work a new compression color images method is proposed. This method is based in measure of information of each band. This technique is called by Self-Adaptive Compression (S.A.C.) and each band of image is compressed with a different threshold, for preserve information with better result. SAC do a large compression in large redundancy bands, that is, lower information and soft compression to bands with bigger amount of information. Two image transforms are used in this technique: Discrete Cosine Transform (DCT) and Principal Component Analysis (PCA). Primary step is convert data to new bands without relationship, with PCA. Later Apply DCT in each band. Data Loss is doing when a threshold discarding any coefficients. This threshold is calculated with two elements: PCA result and a parameter user. Parameters user define a compression tax. The system produce three different thresholds, one to each band of image, that is proportional of amount information. For image reconstruction is realized DCT and PCA inverse. SAC was compared with JPEG (Joint Photographic Experts Group) standard and YIQ compression and better results are obtain, in MSE (Mean Square Root). Tests shown that SAC has better quality in hard compressions. With two advantages: (a) like is adaptive is sensible to image type, that is, presents good results to divers images kinds (synthetic, landscapes, people etc., and, (b) it need only one parameters user, that is, just letter human intervention is required

Especificação e implementação de uma linguagem para transformação de modelos MOF em repositórios dMOF

This work presents the specification and the implementation of a language of Transformations in definite Models specification MOF (Meta Object Facility) of OMG (Object Management Group). The specification uses a boarding based on rules ECA (Event-Condition-Action) and was made on the basis of a set of scenes of use previously defined. The Parser Responsible parser for guaranteeing that the syntactic structure of the language is correct was constructed with the tool JavaCC (Java Compiler Compiler) and the description of the syntax of the language was made with EBNF (Extended Backus-Naur Form). The implementation is divided in three parts: the creation of the interpretative program properly said in Java, the creation of an executor of the actions specified in the language and its integration with the type of considered repository (generated for tool DSTC dMOF). A final prototype was developed and tested in the scenes previously defined

Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado

With the objective to promote sustainable development, the fibres found in nature in abundance, which are biodegradable, of low cost in comparison to synthetic fibres are being used in the manufacture of composites. The mechanical behavior of the curauá and pineapple leaf fibre (PALF) composites in different proportions, 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3) were respectively studied, being initially treated with a 2% aqueous solution of sodium hydroxide. Mechanical analyses indicated that with respect to studies of traction, for the combination of P1 and P3, better results of 22.17 MPa and 16.98 MPa, were obtained respectively, which are higher than that of the combination P2. The results of the same pattern were obtained for analysis of bending resistance where P1 is 1.21% and P3 represents 0.96%. In the case of resistance to bending, best results were obtained for the combination P1 at 49.07 MPa. However, when Young's modulus values were calculated, the values were different to the pattern of the results of other tests, where the combination P2 with the value of 4.06 GPa is greater than the other combinations. This shows that the PALF had a greater influence in relation to curauá fibre. The analysis of the results generally shows that in combinations of two vegetable fibers of cellulosic origin, the fiber which shows higher percentage (75%) is the best option than to the composition of 50%/50%. In the meantime, according to the results obtained in this study, in the case where the application should withstand bending loads, the better composition would be 50%/50%