Antimony glasses with large nonlinear refractive indices, small two-photon absorption coefficients and ultrafast response at telecom wavelengths

Nonlinear (NL) optical properties of antimony oxide based glasses (AG) were characterized for excitation wavelengths from 800 to 1600 m. The NL refractive indices, n2, and the two-photon absorption (TPA) coefficient, β, have been evaluated using the Z-scan technique. Values of n2≈ 10-15 - 10-14 cm2/W of electronic origin were measured and negligible TPA coefficients (β < 0.003 cm/GW) were determined. The response time of the nonlinearity is faster than 100 fs as determined using the Kerr shutter technique. The figure-of-merit usually considered for all-optical switching, T = 2βλ/n2 , indicates that AG are very good materials for ultrafast switches at telecom wavelengths. © 2007 IEEE.

Waveguide features in self-patternable amine functionalized organic-inorganic hybrids

We report the use of organic-inorganic sol-gel derived poly(oxyehylene)/ siloxane hybrid doped with methacrylic acid modified zirconium (IV) n-propoxide for the fabrication of low cost waveguides trough direct UV laser writing. The organic-inorganic hybrids were processed as monoliths with size and shape control. The effective guiding region was identified and the number of modes was estimated via mode field analyses. A grating was successfully superimposed on the channel and the respective reflection spectrum was measured, enabling the determination of the guiding region dimension, the calculation of the effective refractive index of the guided mode. © 2007 IEEE.

Effect of scandium on the structural and photocatalytic properties of titanium dioxide thin films

Pure and scandium doped-TiO2 thin films were prepared by the sol-gel process and coated by dip coating. The effects of scandium on the phase formation, optical properties and photoactivity of the TiO2 thin films were investigated. The lattice parameters and the crystallinity of the anatase phase, characterized by the Rietveld method, demonstrated that scandium doping affected the structural parameters and crystallinity of the films, modifying the absorption edge. A direct correlation was found between band gap energy and photodegradation efficiency, with lower values of band gap energy augmenting this efficiency. Moreover, a significant improvement in the catalyst's photodegradation efficiency was attained with a scandium concentration of 5.0 mol%. © 2007 Springer Science+Business Media, LLC.

Poly [1,1'-bis(ethynyl)-4,4'-biphenyl(bis-tributylphosphine)Pt(II)] solutions used as low dose ionizing radiation dosimeter

In this work, the effect of gamma radiation on the optical properties of polymetallayne poly[1,1'-bis(ethynyl)-4,4'-biphenyl(bis-tributylphosphine)Pt(II) ] (Pt-DEBP) in chloroform solution is studied. The samples were irradiated at room temperature with doses from 0.01 Gy to 1 Gy using a 60Co gamma ray source. A new band at 420 nm is observed in the emission spectra, in superposition to the emission maximum at 398 nm, linearly dependent on dose. We propose to use the ratio of the emission amplitude bands as the dosimetric parameter. This method proved to be robust, accurate, and can be used as a dosimeter in medical applications. © 2013 AIP Publishing LLC.

Luminescent properties of hybrid materials prepared by the polymeric precursor method

Rare earth complexes (RE) can be incorporated in silica matrixes, originating organic/inorganic hybrid materials with good thermal stability and high rare earth emission lines. In this work, the hybrid material was obtained by the polymeric precursor method and ultrasonic dispersed with spherical silica particles prepared by the Stöber Method. The Raman spectra indicated that the Eu3+ ions are involved in a polymeric structure formed as consequence of the chelation and polyesterification reactions of this ion with citric acid and ethylene glycol. After the ultrasonic stirring, 2-hydroxynicotinic ligand will also compose this polymeric rigid structure. The TGA/DTA analysis showed that this polymeric material was thermal decomposed at 300 °C. Moreover, this process allows the chelating process of the 2-hydroxynicotinic acid ligand to the Eu3+ ions. The 29Si NMR showed that the ultrasonic dispersion of the reactants was not able to promote the functionalization of the silica particles with the 2-hydroxynicotinic acid ligand. Moreover, heat treatment promotes the [Eu(HnicO2)3] complex particles incorporation into silica pores. At this temperature, the TGA curve showed that only the thermal degradation of ethylene glycol and citric acid used during the experimental procedure occurs. The silica and hybrid materials are composed by spherical and aggregated particles with particle size of approximately 450 nm, which can be influenced by the heat treatment. These materials also present an absorption band located at 337 nm. The photoluminescent study showed that when the hybrid samples were excited at 337 nm wavelength, the ligand absorbs the excitation light. Part of this energy is transferred to the Eu3+ ion, which main emission, 5D0→ 7F2, is observed in the emission spectrum at 612 nm. As the heating temperature increases to 300 C, the energy transfer is more favorable. The lifetime values showed that the Eu3+ emission is enhanced due to the energy transfer process in the powders. © 2013 Elsevier B.V. All rights reserved.

Structural transition of ZnO thin films produced by RF magnetron sputtering at low temperatures

Zinc oxide (ZnO) thin films were prepared using reactive radio-frequency magnetron sputtering of a pure metallic zinc target onto glass substrates. The evolution of the surface morphology and the optical properties of the films were studied as a function of the substrate temperature, which was varied from 50 to 250 C. The surface topography of the samples was examined using atomic force microscopy (AFM), and their optical properties were studied via transmittance measurements in the UV-Vis-NIR region. DRX and AFM analyses showed that the surface morphology undergoes a structural transition at substrate temperatures of around 150 C. Actually, at 50 C the formation of small grains was observed while at 250 C the grains observed were larger and had more irregular shapes. The optical gap remained constant at ∼3.3 eV for all films. In the visible region, the average optical transmittance was 80 %. From these results, one can conclude that the morphological properties of the ZnO thin films were more greatly affected by the substrate temperature, due to mis-orientation of polycrystalline grains, than were the optical properties. © 2013 Springer Science+Business Media New York.

Modeling of alkynes: synthesis and theoretical properties

ABSTRACT: In this paper we present the synthesis and simulation of alkynes derivatives. Semiempirical calculations were carried out for the ground and first excited states, including the spectroscopic properties of the absorption and emission (fluorescence and phosphorescence) spectra by INDO/S-CI and DNdM-INDO/S-CI methods with geometries fully optimized by PM3/CI. The fact that the theoretical spectra are in accord with the experimental absorption spectra gives us a new possible approach on how structure modifications could affect the non-linear optical properties of alkynes.

Investigação da dinâmica sequêncial Monte Carlo/Mecânica Quântica para sitemas moleculares orgânicos

O principal objetivo deste trabalho é investigar teóricamente as propriedades eletrônicas e óticas de compostos orgânicos em ambiente líquido. A compreensão das interações em sistemas líquidos é muito importante para a descrição de fenômenos em muitas partes da ciência, como Física, Química, Biologia e Materiais, bem como no desenvolvimento de materiais óticos. As flutuações térmicas fazem que inumaram das configurações para os líquidos possam ser gerados. Esta é a razão do comportamento estatístico observado em sistemas líquidos. Considerando estas dificuldades, o tratamento sequencial Monte Carlo / Mecânica Quântica (SMC/QM) é usado neste trabalho. Neste procedimento, a estrutura líquida é gerada primeiramente por simulações clássicas de MC e mais tarde, somente a parte mais importante do sistema é tratada com mecânica quântica. Usando o procedimento acima, os propriedades do quantum o pirazine dimethyl do thiene Methyl da laranja (MO) e do O 2,3-dimetil tieno[3,4-b] pirazina (DTP) foram investigados. O MO é um conhecido indicador de pH e pode ser encontrado sob circunstâncias básicas e acidas. Suas geometrias de mínima energia foram obtidas mediante a Teoria do Funcional da Densidade pelo funcional B3LYP, sendo o sistema descrito pelas bases de Pople com uma função de polarização (6-31G*). Para obter as propriedades médias dos observaveis, cálculos de química quântica foram executados dentro da aproximação semi-empírica de INDO/S-CI. Com respeito ao espectro de absorção, os dados experimentais existentes na literatura científica reportam a existência de uma larga banda localizada na região de baixas energias, mais precisamente entre 400 e 600 nm. Nossos resultados teóricos para a forma alcalina mostram uma transição intensa transição π → π* aproximadamente à 432.4 ± 0.03 nm e, sob condições ácidas, esta transição aparece aproximadamente à 507.4 ± 0.12, 496.4 ± 0.28 ou 545.3 ± 0.10 nm, dependendo da estrutura, mostrando bom acordo com resultados experimentais. O DTP é um sistema particular usado na produção de polímeros de baixo gap. Suas propriedades elétricas e óticas foram obtidas através de um novo procedimento conhecido por Configuração Eletrostática Média do Solvent (ASEC). O procedimento ASEC inclui moléculas do solvente como cargas pontuais e permite o obtenção das quantidades quânticas executando somente poucos cálculos de mecânica quântica. Para o DTP, usando a teoria das perturbações de segunda ordem Mφller-Plesset (MP2) e o conjunto de bases aug-cc-pVDZ, a convergência do momento de dipolo foi alcançada com apenas quatro cálculos de mecânica quântica à 1.16 D, apresentando um aumento de 42% quando comparado ao dipolo isolado. O polarizabilidade corresponde à outra característica elétrica que pôde ser medida. Considerando o mesmo nível empregado ao cálculo do dipolo, o valor médio 132.7 a30 foi observado. A região de mais baixas da energias do espectro de absorption foi investigada também atravé de procedimento de ASEC usando ambos as aproximações, semi-empírico e DFT. Esta região de absorção é motivo de conclusões contraditórias com relação à natureza das transições n → π* e π → π*. Nossos resultados mostram que realmente que essas excitações são realmente observadas simultanemente podendo sobrepôr-se. Como exemplo, nossos resultados para DFT, encontrados usando o funcional B3LYP nos mostra que estas transições aparecem aproximadamente à 360.6 e 351.1 nm.

Correlações entre estrutura e propriedades de condução iônica em materiais híbridos siloxano-poli (propileno óxido), dopados com sais de sódio e potássio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Experimental and Theoretical Investigations of Electronic Structure and Photoluminescence Properties of beta-Ag2MoO4 Microcrystals

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Photoluminescence properties of CaTiO3:Eu3+ nanophosphor obtained by the polymeric precursor method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

High fluorescence quantum efficiency of CdSe/ZnS quantum dots embedded in GPTS/TEOS-derived organic/silica hybrid colloids

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Optical spectrum of bottom-up graphene nanoribbons: towards efficient atom-thick excitonic solar cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the preparation route on the structural, morphological and spectroscopic properties of SrTiO3 and SrTiO3:eu3+ powders

This research shows the influence of the synthesis route in the structural and morphological characteristics as well as in the luminescent properties of doped with europium and pure SrTiO3 (STO) powders prepared by microwave assisted hydrothermal synthesis, MWH, and by the polymeric precursor method, PPM. The XRD at room temperature of the STO powders nominally pure obtained by PPM at 700°C for 3 hours, as well as by the MWH at 190°C by 30 minutes present all the reflection peaks for the cubic perovskite structure (JCPDS-ICDD 35-734). The morphology varies according to the synthesis route. The particles of pure STO obtained by PPM presents morphology in the form of plates and the morphology of the particles synthesized by MWH is spherical with approximately 150 nm. The photoluminescent analysis shows for pure STO wide bands associated with the transition of charge transfer from the titanates group (TiO3)2- that are centered on 450 nm. In both preparation methods the emission bands obtained in the composites spectra were found to be asymmetric and low intense. However, in the case of the STO prepared by the PPM a bigger FWHM of the band can be observed. The excitation of the samples was done using a laser (Coherent Innova) with wavelength of 350 nm.

A joint experimental and theoretical study on the electronic structure and photoluminescence properties of Al-2(WO4)(3) powders

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)